r22052 - in trunk/libavcodec: h264.c h264.h
Author: michael Date: Thu Feb 25 15:02:39 2010 New Revision: 22052 Log: Store intra4x4_pred_mode per row only. about 5 cpu cycles slower in the local code but should be overall faster due to reduced cache use. (my sample though has too few intra4x4 blocks for this to be meassureable easily either way) Modified: trunk/libavcodec/h264.c trunk/libavcodec/h264.h Modified: trunk/libavcodec/h264.c ============================================================================== --- trunk/libavcodec/h264.c Thu Feb 25 13:51:32 2010 (r22051) +++ trunk/libavcodec/h264.c Thu Feb 25 15:02:39 2010 (r22052) @@ -52,15 +52,15 @@ static const uint8_t div6[52]={ }; void ff_h264_write_back_intra_pred_mode(H264Context *h){ - const int mb_xy= h->mb_xy; + int8_t *mode= h->intra4x4_pred_mode + h->mb2br_xy[h->mb_xy]; - h->intra4x4_pred_mode[mb_xy][0]= h->intra4x4_pred_mode_cache[7+8*1]; - h->intra4x4_pred_mode[mb_xy][1]= h->intra4x4_pred_mode_cache[7+8*2]; - h->intra4x4_pred_mode[mb_xy][2]= h->intra4x4_pred_mode_cache[7+8*3]; - h->intra4x4_pred_mode[mb_xy][3]= h->intra4x4_pred_mode_cache[7+8*4]; - h->intra4x4_pred_mode[mb_xy][4]= h->intra4x4_pred_mode_cache[4+8*4]; - h->intra4x4_pred_mode[mb_xy][5]= h->intra4x4_pred_mode_cache[5+8*4]; - h->intra4x4_pred_mode[mb_xy][6]= h->intra4x4_pred_mode_cache[6+8*4]; + mode[0]= h->intra4x4_pred_mode_cache[7+8*1]; + mode[1]= h->intra4x4_pred_mode_cache[7+8*2]; + mode[2]= h->intra4x4_pred_mode_cache[7+8*3]; + mode[3]= h->intra4x4_pred_mode_cache[7+8*4]; + mode[4]= h->intra4x4_pred_mode_cache[4+8*4]; + mode[5]= h->intra4x4_pred_mode_cache[5+8*4]; + mode[6]= h->intra4x4_pred_mode_cache[6+8*4]; } /** Modified: trunk/libavcodec/h264.h ============================================================================== --- trunk/libavcodec/h264.h Thu Feb 25 13:51:32 2010 (r22051) +++ trunk/libavcodec/h264.h Thu Feb 25 15:02:39 2010 (r22052) @@ -298,7 +298,7 @@ typedef struct H264Context{ int topleft_partition; int8_t intra4x4_pred_mode_cache[5*8]; - int8_t (*intra4x4_pred_mode)[8]; + int8_t (*intra4x4_pred_mode); H264PredContext hpc; unsigned int topleft_samples_available; unsigned int top_samples_available; @@ -886,10 +886,11 @@ static void fill_decode_caches(H264Conte if(IS_INTRA4x4(mb_type)){ if(IS_INTRA4x4(top_type)){ - h->intra4x4_pred_mode_cache[4+8*0]= h->intra4x4_pred_mode[top_xy][4]; - h->intra4x4_pred_mode_cache[5+8*0]= h->intra4x4_pred_mode[top_xy][5]; - h->intra4x4_pred_mode_cache[6+8*0]= h->intra4x4_pred_mode[top_xy][6]; - h->intra4x4_pred_mode_cache[7+8*0]= h->intra4x4_pred_mode[top_xy][3]; + int8_t *mode= h->intra4x4_pred_mode + h->mb2br_xy[top_xy]; + h->intra4x4_pred_mode_cache[4+8*0]= mode[4]; + h->intra4x4_pred_mode_cache[5+8*0]= mode[5]; + h->intra4x4_pred_mode_cache[6+8*0]= mode[6]; + h->intra4x4_pred_mode_cache[7+8*0]= mode[3]; }else{ int pred; if(!(top_type & type_mask)) @@ -904,8 +905,9 @@ static void fill_decode_caches(H264Conte } for(i=0; i<2; i++){ if(IS_INTRA4x4(left_type[i])){ - h->intra4x4_pred_mode_cache[3+8*1 + 2*8*i]= h->intra4x4_pred_mode[left_xy[i]][left_block[0+2*i]]; - h->intra4x4_pred_mode_cache[3+8*2 + 2*8*i]= h->intra4x4_pred_mode[left_xy[i]][left_block[1+2*i]]; + int8_t *mode= h->intra4x4_pred_mode + h->mb2br_xy[left_xy[i]]; + h->intra4x4_pred_mode_cache[3+8*1 + 2*8*i]= mode[left_block[0+2*i]]; + h->intra4x4_pred_mode_cache[3+8*2 + 2*8*i]= mode[left_block[1+2*i]]; }else{ int pred; if(!(left_type[i] & type_mask))
michael <subversion at mplayerhq.hu> writes:
Author: michael Date: Thu Feb 25 15:02:39 2010 New Revision: 22052
Log: Store intra4x4_pred_mode per row only. about 5 cpu cycles slower in the local code but should be overall faster due to reduced cache use. (my sample though has too few intra4x4 blocks for this to be meassureable easily either way)
Modified: trunk/libavcodec/h264.c trunk/libavcodec/h264.h
This broke svq3. -- M?ns Rullg?rd mans at mansr.com
M?ns Rullg?rd wrote:
michael <subversion at mplayerhq.hu> writes:
Author: michael Date: Thu Feb 25 15:02:39 2010 New Revision: 22052
Log: Store intra4x4_pred_mode per row only. about 5 cpu cycles slower in the local code but should be overall faster due to reduced cache use. (my sample though has too few intra4x4 blocks for this to be meassureable easily either way)
Modified: trunk/libavcodec/h264.c trunk/libavcodec/h264.h
This broke svq3.
In case Mans wasn't clear, this broke FFmpeg compilation, just just the svq3 FATE test spec. -- -Mike Melanson
On Thu, 25 Feb 2010 07:33:15 -0800 Mike Melanson wrote:
M?ns Rullg?rd wrote:
michael <subversion at mplayerhq.hu> writes:
Author: michael Date: Thu Feb 25 15:02:39 2010 New Revision: 22052
Log: Store intra4x4_pred_mode per row only. about 5 cpu cycles slower in the local code but should be overall faster due to reduced cache use. (my sample though has too few intra4x4 blocks for this to be meassureable easily either way)
Modified: trunk/libavcodec/h264.c trunk/libavcodec/h264.h
This broke svq3.
In case Mans wasn't clear, this broke FFmpeg compilation, just just the svq3 FATE test spec.
in case Mike wasn't clear, this broke FFmpeg compilation, not just the svq3 FATE test spec. Ben
On Thu, Feb 25, 2010 at 05:58:24PM +0100, Benoit Fouet wrote:
On Thu, 25 Feb 2010 07:33:15 -0800 Mike Melanson wrote:
M?ns Rullg?rd wrote:
michael <subversion at mplayerhq.hu> writes:
Author: michael Date: Thu Feb 25 15:02:39 2010 New Revision: 22052
Log: Store intra4x4_pred_mode per row only. about 5 cpu cycles slower in the local code but should be overall faster due to reduced cache use. (my sample though has too few intra4x4 blocks for this to be meassureable easily either way)
Modified: trunk/libavcodec/h264.c trunk/libavcodec/h264.h
This broke svq3.
In case Mans wasn't clear, this broke FFmpeg compilation, just just the svq3 FATE test spec.
in case Mike wasn't clear, this broke FFmpeg compilation, not just the svq3 FATE test spec.
(10^10)^(10^10)l messup, i didnt check cvslog for 4 hours btw next time i mess up or someone else does. Disable whatever broke in svn so at least compilation works! (that is if its no trivial fix ...) sorry again, ill try not to forget svq3 from now on when compiling with disabled dependancies. (enabling deps is no option as its too slow) [...] -- Michael GnuPG fingerprint: 9FF2128B147EF6730BADF133611EC787040B0FAB I have never wished to cater to the crowd; for what I know they do not approve, and what they approve I do not know. -- Epicurus
Michael Niedermayer <michaelni at gmx.at> writes:
sorry again, ill try not to forget svq3 from now on when compiling with disabled dependancies. (enabling deps is no option as its too slow)
Can you please elaborate on that? If you disable deps, you _will_ miss things like this. I'm not aware of any case where more than necessary gets recompiled. -- M?ns Rullg?rd mans at mansr.com
On Thu, Feb 25, 2010 at 07:20:18PM +0000, M?ns Rullg?rd wrote:
Michael Niedermayer <michaelni at gmx.at> writes:
sorry again, ill try not to forget svq3 from now on when compiling with disabled dependancies. (enabling deps is no option as its too slow)
Can you please elaborate on that? If you disable deps, you _will_ miss things like this. I'm not aware of any case where more than necessary gets recompiled.
add a comment to avcodec.h, bump minor api version, ... there are many things that cause quite a bit to be recompiled was there some way to quickly enable/disable deps? currently i have common.mak hacked to achive it, but i faintly remember some discussions about it ... also is there some way by which make would display what it would rebuild without doing a time consuming rebuild? (had i run this with deps i would have spot svq3) [...] -- Michael GnuPG fingerprint: 9FF2128B147EF6730BADF133611EC787040B0FAB I know you won't believe me, but the highest form of Human Excellence is to question oneself and others. -- Socrates
On Thu, Feb 25, 2010 at 08:34:55PM +0100, Michael Niedermayer wrote: [...]
also is there some way by which make would display what it would rebuild without doing a time consuming rebuild? (had i run this with deps i would have spot svq3)
awnsering my own question make --dry-run | sed 's/.* \([^ ]*\)$/\1/' [...] -- Michael GnuPG fingerprint: 9FF2128B147EF6730BADF133611EC787040B0FAB If you really think that XML is the answer, then you definitly missunderstood the question -- Attila Kinali
Michael Niedermayer <michaelni at gmx.at> writes:
On Thu, Feb 25, 2010 at 07:20:18PM +0000, M?ns Rullg?rd wrote:
Michael Niedermayer <michaelni at gmx.at> writes:
sorry again, ill try not to forget svq3 from now on when compiling with disabled dependancies. (enabling deps is no option as its too slow)
Can you please elaborate on that? If you disable deps, you _will_ miss things like this. I'm not aware of any case where more than necessary gets recompiled.
add a comment to avcodec.h, bump minor api version, ... there are many things that cause quite a bit to be recompiled
It's hard to track dependencies other than by file, so yes, that would trigger some superfluous rebuilds. However, this change was only to h264.h. Nothing irrelevant depends on it.
was there some way to quickly enable/disable deps? currently i have common.mak hacked to achive it, but i faintly remember some discussions about it ...
make DEPS=n Before anyone asks, this is a hack that should not be documented. I don't want to deal with the trouble reports that would ensue.
also is there some way by which make would display what it would rebuild without doing a time consuming rebuild? (had i run this with deps i would have spot svq3)
make -n -- M?ns Rullg?rd mans at mansr.com
-On Thu, Feb 25, 2010 at 07:55:36PM +0000, M?ns Rullg?rd wrote:
Michael Niedermayer <michaelni at gmx.at> writes:
On Thu, Feb 25, 2010 at 07:20:18PM +0000, M?ns Rullg?rd wrote:
Michael Niedermayer <michaelni at gmx.at> writes:
sorry again, ill try not to forget svq3 from now on when compiling with disabled dependancies. (enabling deps is no option as its too slow)
Can you please elaborate on that? If you disable deps, you _will_ miss things like this. I'm not aware of any case where more than necessary gets recompiled.
add a comment to avcodec.h, bump minor api version, ... there are many things that cause quite a bit to be recompiled
It's hard to track dependencies other than by file, so yes, that would trigger some superfluous rebuilds. However, this change was only to h264.h. Nothing irrelevant depends on it.
was there some way to quickly enable/disable deps? currently i have common.mak hacked to achive it, but i faintly remember some discussions about it ...
make DEPS=n
Thanks ill try to build with deps from now on before or immedeatly after a commit so such hour long breakage does not reoccur
Before anyone asks, this is a hack that should not be documented. I don't want to deal with the trouble reports that would ensue.
also is there some way by which make would display what it would rebuild without doing a time consuming rebuild? (had i run this with deps i would have spot svq3)
make -n
not readable at all without filtering it though sed or other btw here it take 7-11 seconds, which isnt exactly fast. [...] -- Michael GnuPG fingerprint: 9FF2128B147EF6730BADF133611EC787040B0FAB Old school: Use the lowest level language in which you can solve the problem conveniently. New school: Use the highest level language in which the latest supercomputer can solve the problem without the user falling asleep waiting.
Michael Niedermayer <michaelni at gmx.at> writes:
-On Thu, Feb 25, 2010 at 07:55:36PM +0000, M?ns Rullg?rd wrote:
Michael Niedermayer <michaelni at gmx.at> writes:
On Thu, Feb 25, 2010 at 07:20:18PM +0000, M?ns Rullg?rd wrote:
Michael Niedermayer <michaelni at gmx.at> writes:
sorry again, ill try not to forget svq3 from now on when compiling with disabled dependancies. (enabling deps is no option as its too slow)
Can you please elaborate on that? If you disable deps, you _will_ miss things like this. I'm not aware of any case where more than necessary gets recompiled.
add a comment to avcodec.h, bump minor api version, ... there are many things that cause quite a bit to be recompiled
It's hard to track dependencies other than by file, so yes, that would trigger some superfluous rebuilds. However, this change was only to h264.h. Nothing irrelevant depends on it.
was there some way to quickly enable/disable deps? currently i have common.mak hacked to achive it, but i faintly remember some discussions about it ...
make DEPS=n
Thanks ill try to build with deps from now on before or immedeatly after a commit so such hour long breakage does not reoccur
Thanks.
Before anyone asks, this is a hack that should not be documented. I don't want to deal with the trouble reports that would ensue.
also is there some way by which make would display what it would rebuild without doing a time consuming rebuild? (had i run this with deps i would have spot svq3)
make -n
not readable at all without filtering it though sed or other btw here it take 7-11 seconds, which isnt exactly fast.
Seriously, can we get you a new computer? It sounds like you could use one. -- M?ns Rullg?rd mans at mansr.com
On Thu, Feb 25, 2010 at 10:49:18PM +0100, Michael Niedermayer wrote:
-On Thu, Feb 25, 2010 at 07:55:36PM +0000, M?ns Rullg?rd wrote:
Michael Niedermayer <michaelni at gmx.at> writes:
On Thu, Feb 25, 2010 at 07:20:18PM +0000, M?ns Rullg?rd wrote:
Michael Niedermayer <michaelni at gmx.at> writes:
sorry again, ill try not to forget svq3 from now on when compiling with disabled dependancies. (enabling deps is no option as its too slow)
Can you please elaborate on that? If you disable deps, you _will_ miss things like this. I'm not aware of any case where more than necessary gets recompiled.
add a comment to avcodec.h, bump minor api version, ... there are many things that cause quite a bit to be recompiled
It's hard to track dependencies other than by file, so yes, that would trigger some superfluous rebuilds. However, this change was only to h264.h. Nothing irrelevant depends on it.
was there some way to quickly enable/disable deps? currently i have common.mak hacked to achive it, but i faintly remember some discussions about it ...
make DEPS=n
Thanks ill try to build with deps from now on before or immedeatly after a commit so such hour long breakage does not reoccur
Before anyone asks, this is a hack that should not be documented. I don't want to deal with the trouble reports that would ensue.
also is there some way by which make would display what it would rebuild without doing a time consuming rebuild? (had i run this with deps i would have spot svq3)
make -n
not readable at all without filtering it though sed or other btw here it take 7-11 seconds, which isnt exactly fast.
and thats without deps with deps its 21 seconds and while my pentium dual does it in 2 secs with deps and 1.3 without i still think this is ridiculously slow for what it does [...] -- Michael GnuPG fingerprint: 9FF2128B147EF6730BADF133611EC787040B0FAB There will always be a question for which you do not know the correct awnser.
Michael Niedermayer <michaelni at gmx.at> writes:
On Thu, Feb 25, 2010 at 10:49:18PM +0100, Michael Niedermayer wrote:
-On Thu, Feb 25, 2010 at 07:55:36PM +0000, M?ns Rullg?rd wrote:
Michael Niedermayer <michaelni at gmx.at> writes:
On Thu, Feb 25, 2010 at 07:20:18PM +0000, M?ns Rullg?rd wrote:
Michael Niedermayer <michaelni at gmx.at> writes:
sorry again, ill try not to forget svq3 from now on when compiling with disabled dependancies. (enabling deps is no option as its too slow)
Can you please elaborate on that? If you disable deps, you _will_ miss things like this. I'm not aware of any case where more than necessary gets recompiled.
add a comment to avcodec.h, bump minor api version, ... there are many things that cause quite a bit to be recompiled
It's hard to track dependencies other than by file, so yes, that would trigger some superfluous rebuilds. However, this change was only to h264.h. Nothing irrelevant depends on it.
was there some way to quickly enable/disable deps? currently i have common.mak hacked to achive it, but i faintly remember some discussions about it ...
make DEPS=n
Thanks ill try to build with deps from now on before or immedeatly after a commit so such hour long breakage does not reoccur
Before anyone asks, this is a hack that should not be documented. I don't want to deal with the trouble reports that would ensue.
also is there some way by which make would display what it would rebuild without doing a time consuming rebuild? (had i run this with deps i would have spot svq3)
make -n
not readable at all without filtering it though sed or other btw here it take 7-11 seconds, which isnt exactly fast.
and thats without deps with deps its 21 seconds
and while my pentium dual does it in 2 secs with deps and 1.3 without i still think this is ridiculously slow for what it does
On my computers it takes but a fraction of a second. What filesystem are you using? Is it any quicker with make -r? -- M?ns Rullg?rd mans at mansr.com
On Thu, Feb 25, 2010 at 10:19:20PM +0000, M?ns Rullg?rd wrote:
Michael Niedermayer <michaelni at gmx.at> writes:
On Thu, Feb 25, 2010 at 10:49:18PM +0100, Michael Niedermayer wrote:
-On Thu, Feb 25, 2010 at 07:55:36PM +0000, M?ns Rullg?rd wrote:
Michael Niedermayer <michaelni at gmx.at> writes:
On Thu, Feb 25, 2010 at 07:20:18PM +0000, M?ns Rullg?rd wrote:
Michael Niedermayer <michaelni at gmx.at> writes:
> sorry again, ill try not to forget svq3 from now on when compiling with > disabled dependancies. (enabling deps is no option as its too slow)
Can you please elaborate on that? If you disable deps, you _will_ miss things like this. I'm not aware of any case where more than necessary gets recompiled.
add a comment to avcodec.h, bump minor api version, ... there are many things that cause quite a bit to be recompiled
It's hard to track dependencies other than by file, so yes, that would trigger some superfluous rebuilds. However, this change was only to h264.h. Nothing irrelevant depends on it.
was there some way to quickly enable/disable deps? currently i have common.mak hacked to achive it, but i faintly remember some discussions about it ...
make DEPS=n
Thanks ill try to build with deps from now on before or immedeatly after a commit so such hour long breakage does not reoccur
Before anyone asks, this is a hack that should not be documented. I don't want to deal with the trouble reports that would ensue.
also is there some way by which make would display what it would rebuild without doing a time consuming rebuild? (had i run this with deps i would have spot svq3)
make -n
not readable at all without filtering it though sed or other btw here it take 7-11 seconds, which isnt exactly fast.
and thats without deps with deps its 21 seconds
and while my pentium dual does it in 2 secs with deps and 1.3 without i still think this is ridiculously slow for what it does
On my computers it takes but a fraction of a second. What filesystem are you using?
ext2/ext3 suggestions for something faster are welcome
Is it any quicker with make -r?
time make -n -r >/dev/null real 0m1.722s user 0m1.453s sys 0m0.159s time make -n >/dev/null real 0m12.078s user 0m11.177s sys 0m0.252s [...] -- Michael GnuPG fingerprint: 9FF2128B147EF6730BADF133611EC787040B0FAB Everything should be made as simple as possible, but not simpler. -- Albert Einstein
On Thu, Feb 25, 2010 at 11:40:05PM +0100, Michael Niedermayer wrote:
Is it any quicker with make -r?
time make -n -r >/dev/null
real 0m1.722s user 0m1.453s sys 0m0.159s
time make -n >/dev/null
real 0m12.078s user 0m11.177s sys 0m0.252s
Try adding .SUFFIXES: to common.mak Should be close to make -r speed.
Reimar D?ffinger <Reimar.Doeffinger at gmx.de> writes:
On Thu, Feb 25, 2010 at 11:40:05PM +0100, Michael Niedermayer wrote:
Is it any quicker with make -r?
time make -n -r >/dev/null
real 0m1.722s user 0m1.453s sys 0m0.159s
time make -n >/dev/null
real 0m12.078s user 0m11.177s sys 0m0.252s
Try adding .SUFFIXES: to common.mak Should be close to make -r speed.
I added that to the makefile. It seems useful enough. -- M?ns Rullg?rd mans at mansr.com
On Fri, Feb 26, 2010 at 4:10 AM, Michael Niedermayer <michaelni at gmx.at> wrote:
On Thu, Feb 25, 2010 at 10:19:20PM +0000, M?ns Rullg?rd wrote:
Michael Niedermayer <michaelni at gmx.at> writes:
On Thu, Feb 25, 2010 at 10:49:18PM +0100, Michael Niedermayer wrote:
? ? -On Thu, Feb 25, 2010 at 07:55:36PM +0000, M?ns Rullg?rd wrote:
Michael Niedermayer <michaelni at gmx.at> writes:
On Thu, Feb 25, 2010 at 07:20:18PM +0000, M?ns Rullg?rd wrote: > Michael Niedermayer <michaelni at gmx.at> writes: > > > sorry again, ill try not to forget svq3 from now on when compiling with > > disabled dependancies. (enabling deps is no option as its too slow) > > Can you please elaborate on that? ?If you disable deps, you _will_ > miss things like this. ?I'm not aware of any case where more than > necessary gets recompiled.
add a comment to avcodec.h, bump minor api version, ... there are many things that cause quite a bit to be recompiled
It's hard to track dependencies other than by file, so yes, that would trigger some superfluous rebuilds. ?However, this change was only to h264.h. ?Nothing irrelevant depends on it.
was there some way to quickly enable/disable deps? currently i have common.mak hacked to achive it, but i faintly remember some discussions about it ...
make DEPS=n
Thanks ill try to build with deps from now on before or immedeatly after a commit so such hour long breakage does not reoccur
Before anyone asks, this is a hack that should not be documented. ?I don't want to deal with the trouble reports that would ensue.
also is there some way by which make would display what it would rebuild without doing a time consuming rebuild? (had i run this with deps i would have spot svq3)
make -n
not readable at all without filtering it though sed or other btw here it take 7-11 seconds, which isnt exactly fast.
and thats without deps with deps its 21 seconds
and while my pentium dual does it in 2 secs with deps and 1.3 without i still think this is ridiculously slow for what it does
On my computers it takes but a fraction of a second. ?What filesystem are you using?
ext2/ext3 suggestions for something faster are welcome
a tmpfs perhaps :) though i dont know how much ram you have... -- Jai Menon
On Thu, Feb 25, 2010 at 10:48 AM, Michael Niedermayer <michaelni at gmx.at> wrote:
On Thu, Feb 25, 2010 at 05:58:24PM +0100, Benoit Fouet wrote:
On Thu, 25 Feb 2010 07:33:15 -0800 Mike Melanson wrote:
M?ns Rullg?rd wrote:
michael <subversion at mplayerhq.hu> writes:
Author: michael Date: Thu Feb 25 15:02:39 2010 New Revision: 22052
Log: Store intra4x4_pred_mode per row only. about 5 cpu cycles slower in the local code but should be overall faster due to reduced cache use. (my sample though has too few intra4x4 blocks for this to be meassureable easily either way)
Modified: ? ?trunk/libavcodec/h264.c ? ?trunk/libavcodec/h264.h
This broke svq3.
In case Mans wasn't clear, this broke FFmpeg compilation, just just the svq3 FATE test spec.
in case Mike wasn't clear, this broke FFmpeg compilation, not just the svq3 FATE test spec.
(10^10)^(10^10)l messup, i didnt check cvslog for 4 hours
btw next time i mess up or someone else does. Disable whatever broke in svn so at least compilation works! (that is if its no trivial fix ...)
sorry again, ill try not to forget svq3 from now on when compiling with disabled dependancies. (enabling deps is no option as its too slow)
Do we need to buy you a Core i7 box? Dark Shikari
participants (8)
-
benoit.fouet@free.fr -
darkshikari@gmail.com -
jmenon86@gmail.com -
mans@mansr.com -
michaelni@gmx.at -
mike@multimedia.cx -
Reimar.Doeffinger@gmx.de -
subversion@mplayerhq.hu