[00:28:06 CET] <Maverick|MSG> efface: I tried it with -abort_on but no luck there [00:29:08 CET] <Maverick|MSG> if I do set a timeout ffmpeg won't quit, but it does finish up writing the mp4 and it outputs to the console: "I/O error" [00:49:12 CET] <teratorn> is sending an ffmpeg process SIGTERM the same as hitting "q" at the terminal? [00:49:50 CET] <DHE> basically yes [00:54:22 CET] <teratorn> SIGTERM and SIGKILL do the same thing, it seems... they print a message "Exiting normally..." but just hitting q does not print that message.. hm oh well, good enough for who it is ;) [00:54:31 CET] <teratorn> err, SIGINT and SIGTERM [00:58:47 CET] <DHE> yes, SIGKILL is one of two very special signals [00:58:49 CET] <DHE> :) [01:12:33 CET] <Mista_D> Encoding video and copying PCM stream - AV out of sync. If encode both audio and video the sync is ok. MXF container, MPEG2video and PCM codec. [03:13:00 CET] <madprops> hi i usually use something like "ffmpeg -i RJnUmRaFx.mp4 -crf 25 tost.mp4" [03:13:27 CET] <madprops> can I add something to it so there's almost 0% chance of encoding fails (corruptions, no video, no audio, etc) ? [03:13:44 CET] <madprops> input files would be either mp4 or webm [03:14:12 CET] <DHE> ffmpeg is pretty good. if one of those things happens, it's the input file's fault [03:14:25 CET] <k_sze[work]> I'm trying to build ffmpeg from source on an nVidia Jetson TK1 (it's an armv71), but I get "GNU assembler not found, install/update gas-preprocessor" from the configure script. [03:14:28 CET] <DHE> but realistically you should specify the codecs you want, at a minimum [03:14:58 CET] <madprops> DHE, like x264? [03:15:08 CET] <DHE> also the audio codec [03:15:33 CET] <madprops> which one do you suggest for audio? [03:15:59 CET] <madprops> it's for displaying videos in a browser [03:25:29 CET] <madprops> i would think mp3 is more compatible [03:25:38 CET] <madprops> but im seeing it's maybe aac which is more compatible [07:37:06 CET] <beauty> hello [07:38:06 CET] <beauty> how to use custom IO? [07:38:48 CET] <beauty> After I use custom IO, will lack five frame. [07:43:09 CET] <fahadash> Can we have line breaks in filter complex script? [07:54:46 CET] <nonex86> beauty: i am using custom io in my software without a problem [08:02:26 CET] <beauty> nonex86: could you teach me ? [08:02:33 CET] <beauty> hello [08:03:49 CET] <nonex86> beauty: that depends what do you mean by saying "teach me" :) [08:49:57 CET] <Diljeet> hello [08:50:23 CET] <Diljeet> i am here to ask a question to anyone available here [08:51:50 CET] <Diljeet> I want to ask, can i use a "C" class from ffmpeg source and convert it to "JAVA" and use it in commercially, i will share all modified class with eveyone, ami permitted to do that [08:53:16 CET] <Diljeet> I want to ask, can i use a "C" class from ffmpeg source and convert it to "JAVA" and use it in commercial app, i will share all modified class with everyone, am i permitted to do that [10:18:00 CET] Last message repeated 1 time(s). [10:28:09 CET] <ikevin> Diljeet, you'll find your reply here: https://www.ffmpeg.org/legal.html [10:30:35 CET] <Diljeet> Thanks i am reading it [11:18:15 CET] <thebombzen> "This channel is publicly logged" - where can I find the logs? [11:28:37 CET] <thebombzen> also [11:28:53 CET] <thebombzen> the wiki lists libvorbis as being >= libfdk_aac. when did this happen? when did libvorbis get better than AAC? [12:02:32 CET] <ehsanv> hi, i want to add a logo (use overlay) to my videos, and want my logo to be exactly 1/4 width of input videos (input videos have different widths). how can i do this [12:50:25 CET] <durandal_1707> thebombzen: on ffmpeg.org web page [14:09:52 CET] <nyuszika7h> how can I get ffmpeg to take the Display Aspect Ratio into account when taking a snapshot with "-frames:v 1"? [14:10:23 CET] <nyuszika7h> well, it seems "-vf scale=1024:576" works [14:16:31 CET] <nonex86> simple scale will not preserve aspect ratio [14:16:59 CET] <nonex86> you should said this directly and perhaps pad the result image [14:18:01 CET] <nonex86> read about force_original_aspect_ratio and pad [14:18:45 CET] <nyuszika7h> I'll take a look [14:18:49 CET] <nyuszika7h> the resolution is 720x576 and corrected to 1024x576 with display aspect ratio (a friend captured this from TV) [14:20:59 CET] <nonex86> i assume you have SAR 1:1? [14:21:39 CET] <nyuszika7h> Stream #0:0: Video: h264 (Main), yuv420p, 720x576 [SAR 64:45 DAR 16:9], 25 fps, 25 tbr, 1k tbn, 50 tbc (default) [14:22:17 CET] <nonex86> and the result SAR? [14:23:00 CET] <nyuszika7h> the thumbnail? [14:23:02 CET] <nyuszika7h> eam #0:0: Video: mjpeg, yuvj420p(pc, bt470bg/unknown/unknown), 720x576 [SAR 64:45 DAR 16:9], 25 tbr, 25 tbn, 25 tbc [14:23:11 CET] <nyuszika7h> Str^ even [14:23:32 CET] <nonex86> i dont understand, you said 720x576->1024x567 [14:23:34 CET] <nonex86> isnt it? [14:23:39 CET] <nyuszika7h> 576 not 567 [14:23:56 CET] <nonex86> ok, lets correct [14:23:59 CET] <nonex86> i dont understand, you said 720x576->1024x576 [14:24:00 CET] <nyuszika7h> I mean on playback it's 1024x576 because of the DAR [14:24:10 CET] <nonex86> :) [14:24:50 CET] <nyuszika7h> with some players if I take a snapshot it ends up as 1024x576, with other players and with ffmpeg it's 720x576 and looks stretched [14:25:32 CET] <nonex86> so, as was said before [14:25:37 CET] <nonex86> simple scale doesnt work [14:25:39 CET] <nonex86> isnt it? [14:25:50 CET] <nyuszika7h> it does work if I just scale when taking the thumbnail [14:25:57 CET] <nyuszika7h> the resulting thumbnail looks right [14:26:21 CET] <nyuszika7h> (I tried that after asking the question) [19:15:16 CET] <thebombzen_> I don't remember if I got an answer for this before, but... why does -map_metadata -1 work? [19:15:54 CET] <thebombzen_> if -map_metadata behaves like -map, then -map_metadata -1 would mean "discard metadata from the first input" [19:16:05 CET] <thebombzen_> so doesn't that mean that you should use -map_metadata -0 [19:20:05 CET] <thebombzen_> another thing to note: -map_metadata -1 is not mentioned in: https://ffmpeg.org/ffmpeg.html#Advanced-options [19:20:35 CET] <thebombzen_> at least not under the section documenting -map_metadata. maybe that's why so many people ask that question [20:01:22 CET] <kerio> thebombzen: is metadata taken from inputs that are not the first, tho? [22:51:55 CET] <mosb3rg> hey there, i have a question about the sirius xm style HLS AAC delivery and ripping with there cookie system [22:52:57 CET] <mosb3rg> unlike what im customaryly used to seeing with the set cookie: value im seeing a few set cookie values coming from them even in the same playlist etc. could i provide an example and get some feed back on how ffmpeg can parse this set cookie value and correctly dump from the system ? [23:15:31 CET] <blue_misfit> hey folks, if I have an anamorphic 720x480 source and I want ffmpeg to make it square pixels, and specify the output height but let ffmpeg calculate the appropriate square pixel width, how would I do that? [23:16:31 CET] <blue_misfit> like for a 720x480 source with a 16x9 DAR I want to do something like -vf scale=w=-2:h=360 and have ffmpeg make a 640x360 output [23:16:57 CET] <blue_misfit> and for a 720x480 source with a 4x3 DAR I want that same command to create a 480x360 output [23:25:42 CET] <markvandenborre> blue_misfit: sorry, no idea [23:25:52 CET] <blue_misfit> I'm getting pretty close [23:25:57 CET] <blue_misfit> -vf setdar=16:9,scale=w=360*dar:h=360,setsar=1 [23:26:07 CET] <blue_misfit> -vf setdar=4:3,scale=w=360*dar:h=360,setsar=1 [23:26:10 CET] <blue_misfit> that seems to do it [23:26:18 CET] <markvandenborre> ah, congratulations [23:26:40 CET] <blue_misfit> I have to force in the beginning, but that's because my sources have slighly screwy DARs so there's some fuzzy logic upstream :) [23:26:45 CET] <blue_misfit> closeenough.jpg [23:27:49 CET] <markvandenborre> blue_misfit: do you happen to have any idea how I could solve my problem: [23:28:03 CET] <markvandenborre> I have ffmpeg output to a udp multicast address [23:28:22 CET] <markvandenborre> (a h264 encoded video stream, and an aac encoded audio stream) [23:28:44 CET] <markvandenborre> I can play that stream using mpv [23:28:48 CET] <markvandenborre> but not using ffplay [23:29:30 CET] <markvandenborre> actually, scrap that, I can play that stream using ffplay [23:30:08 CET] <markvandenborre> the problem is when I want to read from that udp multicast source [23:30:29 CET] <markvandenborre> and send it out as an flv with codec copy [23:30:36 CET] <markvandenborre> as an rtmp stream basicly [23:30:40 CET] <markvandenborre> it refuses to [23:31:12 CET] <markvandenborre> because it gets confused about the video stream in the udp multicast (mpeg ts) [23:32:25 CET] <blue_misfit> hmmm [23:32:32 CET] <markvandenborre> it says "could not find codec parameters for stream 0 (Video: h264 ([27] [0] [0] / 0x001B), none): unspecified size [23:32:51 CET] <markvandenborre> Consider increasing the value for the 'analyzeduration' and 'probesize' options [23:32:57 CET] <blue_misfit> let me see if I can replicate [23:33:00 CET] <markvandenborre> but those are already ridiculously high [23:33:07 CET] <blue_misfit> so make a multicast TS using h264 and aac is the first step right? [23:33:18 CET] <markvandenborre> what I am using is [23:33:34 CET] <markvandenborre> ffmpeg -re -i testvid/testvid.mp4 -c copy -f mpegts udp://227.1.3.1:9000 [23:33:46 CET] <markvandenborre> to create the multicast stream [23:34:57 CET] <mosb3rg> hey gents anyone around with experience using cookies with HLS streams ? [23:35:37 CET] <markvandenborre> mosb3rg: I've played with HLS streams [23:35:43 CET] <markvandenborre> but the cookie thing, not really [23:36:49 CET] <markvandenborre> mosb3rg: have a look at stuff like http://stackoverflow.com/questions/2936329/nginx-redirect-if-cookie-present [23:36:52 CET] <markvandenborre> ? [23:36:52 CET] <blue_misfit> ok so I have the multicast stream working markvandenborre [23:37:01 CET] <blue_misfit> what's next [23:37:18 CET] <blue_misfit> you want to rewrap to flv and deliver via rtmp? [23:37:22 CET] <blue_misfit> or save as an flv file [23:37:27 CET] <markvandenborre> sec [23:38:36 CET] <markvandenborre> hm, I skipped a crucial step after a long day, sorry... [23:38:47 CET] <blue_misfit> all good! Glad you sorted it out [23:39:08 CET] <markvandenborre> nope, didn't [23:39:21 CET] <markvandenborre> but in showing you what I was trying to do with the multicast... [23:39:51 CET] <markvandenborre> https://github.com/FOSDEM/video/blob/master/software/ansible/playbooks/roles... [23:39:59 CET] <markvandenborre> is actually what prepares the output [23:41:02 CET] <markvandenborre> so I guess you could replace the first bit by ffmpeg -y -re -i testvid.mp4 [23:41:40 CET] <markvandenborre> then keep the rest from "-threads:0 0 \" [23:42:17 CET] <markvandenborre> and replace the ${MULTICAST_SINK} in the last line with something sensible, like udp://227.1.3.3:9000 [23:42:44 CET] <markvandenborre> let me write it out for you [23:42:54 CET] <markvandenborre> sec [23:44:39 CET] <markvandenborre> blue_misfit: something like http://pastie.org/10985370 [23:44:54 CET] <markvandenborre> should give you a fairly good replication of the problem I'm bumping into [23:45:05 CET] <markvandenborre> let me try it on my machine to confirm too [23:49:54 CET] Action: markvandenborre is trying if this yields the same error message [00:00:00 CET] --- Sat Dec 24 2016
participants (1)
-
burek