December 2011 - FFmpeg-trac - lists.ffmpeg.org

#712(FFmpeg:new): m2v: wrong duration
by FFmpeg 31 Jan '14

31 Jan '14

#712: m2v: wrong duration -------------------------------------+------------------------------------- Reporter: cbsrobot | Type: defect Status: new | Priority: normal Component: FFmpeg | Version: git- Keywords: mpeg2video | master m2v | Blocked By: Blocking: | Reproduced by developer: 0 Analyzed by developer: 0 | -------------------------------------+------------------------------------- When converting any file to a m2v and checking the resulting file, the duration is not correctly calculated. mplayer shows also wrong duration. Quicktime and Mediainfo show the correct duration. example: ffmpeg -i fate/aletrek-rle.mov -target pal-dvd -f mpeg2video -an aletrek- rle.m2v [...] Duration: 00:00:03.33 ffprobe aletrek-rle.m2v [...] Duration: 00:00:00.76 mediainfo aletrek-rle.m2v [...] Duration : 3s 400ms mplayer -vo null -ao null -frames 0 -identify aletrek-rle.m2v [...] ID_LENGTH=0.77 -- Ticket URL: <http://ffmpeg.org/trac/ffmpeg/ticket/712> FFmpeg <http://ffmpeg.org> FFmpeg issue tracker

1 6

#420(undetermined:new): Sound fragments after seeking
by FFmpeg 20 Jan '14

20 Jan '14

#420: Sound fragments after seeking --------------------------+-------------------------- Reporter: kaptnole | Type: defect Status: new | Priority: important Component: undetermined | Version: unspecified Keywords: | Blocked By: Blocking: | Reproduced: 1 Analyzed: 1 | --------------------------+-------------------------- While trying to use FFmpeg libs as a developer I found the following: When decoding sound from some compressed audio formats and doing a seek, the first decoded packet after seeking is buggy. I had this with some mp4 files with aac audio codec and some wmv files with wma audio codec. Looks like some leftovers from internal buffers - but I am using 'avcodec_flush_buffers'! That of course leads to nasty sound noise/clicks. See attached sourcecode. Basically it shows the first few bytes of the first decoded sound packet then seeks back and shows the first packets decoding again. If you use it with some wmv or mp4 file with sound you should see see effect that both outputs at 0 are different but should be equal. Just make sure the sound is not only silence at the first 10 packets. Or am I missing some other flush...whatever function here? I am developing under windows using the actual ffmpeg git version. Confirmed for 32 and 64 bit version, self compiled and downloaded autobuilds. -- Ticket URL: <https://ffmpeg.org/trac/ffmpeg/ticket/420> FFmpeg <http://ffmpeg.org> FFmpeg issue tracker

1 16

#353(build system:new): Failed compiling FFmpeg in OS X 10.6.8
by FFmpeg 16 Jan '14

16 Jan '14

#353: Failed compiling FFmpeg in OS X 10.6.8 --------------------------+--------------------- Reporter: joao | Type: defect Status: new | Priority: normal Component: build system | Version: 0.8 Keywords: compile | Blocked By: Blocking: | Reproduced: 0 Analyzed: 0 | --------------------------+--------------------- Hi guys, Over at the Homebrew project (OS X package manager) we're running into issues compiling and installing FFmpeg on OS X. You can see our ticket here: https://github.com/mxcl/homebrew/issues/6278 The compilation error is seen here: https://gist.github.com/1059859 Someone managed to make it fail a bit later by doing this: https://gist.github.com/1072836 Can you provide us any help in getting this to compile? Thanks. -- Ticket URL: <https://ffmpeg.org/trac/ffmpeg/ticket/353> FFmpeg <http://ffmpeg.org> FFmpeg issue tracker

1 16

#536(FFmpeg:new): WTV MUX - Cannot consume AAC audio or H.264 video...
by FFmpeg 24 Dec '13

24 Dec '13

#536: WTV MUX - Cannot consume AAC audio or H.264 video... -------------------------------------+------------------------------------- Reporter: ianken | Owner: michael Type: | Status: new enhancement | Component: FFmpeg Priority: normal | Keywords: wtv mux Version: | h.264 aac unspecified | Blocking: Blocked By: | Analyzed by developer: 0 Reproduced by developer: 0 | -------------------------------------+------------------------------------- H.264 and AAC are supported in WTV. One of the main reasons MSFT moved to WTV was to support these formats (required for ISDB-T). -- Ticket URL: <https://ffmpeg.org/trac/ffmpeg/ticket/536> FFmpeg <http://ffmpeg.org> FFmpeg issue tracker

1 12

#43(undetermined:new): JACK input device doesn't link on OS X
by FFmpeg 10 Dec '13

10 Dec '13

#43: JACK input device doesn't link on OS X --------------------------+--------------------- Reporter: nieder | Type: defect Status: new | Priority: normal Component: undetermined | Version: git Keywords: | Blocked By: Blocking: | Reproduced: 0 Analyzed: 0 | --------------------------+--------------------- This is copied from the old roundup #976 https://roundup.libav.org/issue976 On OS X, using --enable-indev=jack, the build fails with {{{ CC libavdevice/jack_audio.o /src/ffmpeg/libavdevice/jack_audio.c: In function 'audio_read_packet': /src/ffmpeg/libavdevice/jack_audio.c:277: warning: implicit declaration of function 'sem_timedwait' AR libavdevice/libavdevice.a LD libavdevice/libavdevice.52.dylib Undefined symbols: "_sem_timedwait", referenced from: _audio_read_packet in jack_audio.o ld: symbol(s) not found collect2: ld returned 1 exit status make: *** [libavdevice/libavdevice.52.dylib] Error 1 }}} sem_* is semaphore_* on OS X. -- Ticket URL: <http://ffmpeg.org/trac/ffmpeg/ticket/43> FFmpeg <http://ffmpeg.org> FFmpeg issue tracker

1 6

#314(avdevice:new): OpenAL device does not work on OS X
by FFmpeg 10 Dec '13

10 Dec '13

#314: OpenAL device does not work on OS X ----------------------+-------------------------- Reporter: nieder | Type: enhancement Status: new | Priority: normal Component: avdevice | Version: git-master Keywords: | Blocked By: Blocking: | Reproduced: 0 Analyzed: 0 | ----------------------+-------------------------- configure is not set to find openal on OS X. The fix for the linker check is easy: add "-Wl,-framework,OpenAL" to the list of flags to check {{{ -enabled openal && { { for al_libs in "${OPENAL_LIBS}" "-lopenal" "-lOpenAL32"; do +enabled openal && { { for al_libs in "${OPENAL_LIBS}" "-lopenal" "-lOpenAL32" "-Wl,-framework,OpenAL"; do }}} I don't know how to fix the header check to look for multiple possibilities, but on OS X the header in the OpenAL framework is found in OpenAL/al.h (not AL/al.h like in linux). If I change the header check in configure and the includes in libavdevice/openal-dec.c, the build and linkage works well. However, running 'ffmpeg -f openal' as suggested in the manual fails with an malloc error, so this might just not be doable on OS X. {{{ nieder $ /usr/local/ffmpeg-git/bin/ffmpeg -list_devices true -f openal -i dummy out.ogg ffmpeg version N-31036-g65eae2a, Copyright (c) 2000-2011 the FFmpeg developers built on Jun 27 2011 10:29:19 with gcc 4.0.1 (Apple Inc. build 5493) configuration: --prefix=/usr/local/ffmpeg-git --mandir=/usr/local /ffmpeg-git/share/man --disable-static --enable-shared --enable-gpl --enable-version3 --enable-postproc --enable-pthreads --enable-x11grab --enable-bzlib --enable-libcelt --enable-libopencore-amrnb --enable- libopencore-amrwb --enable-libdirac --enable-libfreetype --enable- libmp3lame --enable-libopenjpeg --enable-librtmp --enable-libschroedinger --enable-libspeex --enable-libtheora --enable-libvorbis --enable-libvpx --enable-libx264 --enable-libxvid --enable-openal --enable-zlib --disable- debug --extra-cflags='-I/sw/lib/libspeex1/include -I/sw/include -I/usr/X11R6/include' --extra-ldflags='-L/sw/lib/libspeex1/lib -L/sw/lib -L/usr/X11R6/lib' libavutil 51. 10. 0 / 51. 10. 0 libavcodec 53. 7. 0 / 53. 7. 0 libavformat 53. 4. 0 / 53. 4. 0 libavdevice 53. 2. 0 / 53. 2. 0 libavfilter 2. 24. 0 / 2. 24. 0 libswscale 2. 0. 0 / 2. 0. 0 libpostproc 51. 2. 0 / 51. 2. 0 [openal @ 0x200a800] List of OpenAL capture devices on this system: [openal @ 0x200a800] Built-in Microphone dummy: Immediate exit requested nieder $ /usr/local/ffmpeg-git/bin/ffmpeg -f openal -i 'Built-in Microphone' out.ogg ffmpeg version N-31036-g65eae2a, Copyright (c) 2000-2011 the FFmpeg developers built on Jun 27 2011 10:29:19 with gcc 4.0.1 (Apple Inc. build 5493) configuration: --prefix=/usr/local/ffmpeg-git --mandir=/usr/local /ffmpeg-git/share/man --disable-static --enable-shared --enable-gpl --enable-version3 --enable-postproc --enable-pthreads --enable-x11grab --enable-bzlib --enable-libcelt --enable-libopencore-amrnb --enable- libopencore-amrwb --enable-libdirac --enable-libfreetype --enable- libmp3lame --enable-libopenjpeg --enable-librtmp --enable-libschroedinger --enable-libspeex --enable-libtheora --enable-libvorbis --enable-libvpx --enable-libx264 --enable-libxvid --enable-openal --enable-zlib --disable- debug --extra-cflags='-I/sw/lib/libspeex1/include -I/sw/include -I/usr/X11R6/include' --extra-ldflags='-L/sw/lib/libspeex1/lib -L/sw/lib -L/usr/X11R6/lib' libavutil 51. 10. 0 / 51. 10. 0 libavcodec 53. 7. 0 / 53. 7. 0 libavformat 53. 4. 0 / 53. 4. 0 libavdevice 53. 2. 0 / 53. 2. 0 libavfilter 2. 24. 0 / 2. 24. 0 libswscale 2. 0. 0 / 2. 0. 0 libpostproc 51. 2. 0 / 51. 2. 0 mpeg(49840,0xa025b720) malloc: *** error for object 0x1e2c0e0: incorrect checksum for freed object - object was probably modified after being freed. *** set a breakpoint in malloc_error_break to debug mpeg(49840,0xa025b720) malloc: *** error for object 0x1e2c0e0: incorrect checksum for freed object - object was probably modified after being freed. *** set a breakpoint in malloc_error_break to debug [openal @ 0x200a800] Error: ALC Invalid Device Bus error }}} -- Ticket URL: <http://ffmpeg.org/trac/ffmpeg/ticket/314> FFmpeg <http://ffmpeg.org> FFmpeg issue tracker

1 2

#228(FFserver:new): FFserver: reordering of "<Stream>"s in config file makes difference
by FFmpeg 10 Dec '13

10 Dec '13

#228: FFserver: reordering of "<Stream>"s in config file makes difference ------------------------+---------------------------------------- Reporter: burek | Owner: baptiste Type: defect | Status: new Priority: important | Component: FFserver Version: git | Keywords: ordering items config file Blocked By: | Blocking: Reproduced: 0 | Analyzed: 0 ------------------------+---------------------------------------- The first config file (ffserver1.conf) made ffserver drop rtsp connections, with error message "'''[NULL @ 0x1be7ba0]AAC with no global headers is currently not supported.'''" After just a simple reordering of <Stream> items (ffserver2.conf), everything started to work properly? Is this expected behavior? :) -- Ticket URL: <https://ffmpeg.org/trac/ffmpeg/ticket/228> FFmpeg <http://ffmpeg.org> FFmpeg issue tracker

1 6

#512(avutil:new): libavutil\common.h conversion warnings
by FFmpeg 05 Dec '13

05 Dec '13

#512: libavutil\common.h conversion warnings ---------------------------------------+--------------------------------- Reporter: DonMoir | Owner: michael Type: enhancement | Status: new Priority: minor | Component: avutil Version: unspecified | Keywords: Blocked By: | Blocking: Reproduced by developer: 0 | Analyzed by developer: 0 ---------------------------------------+--------------------------------- Would you please make a couple minor changes to libavutil\common.h. static av_always_inline av_const int16_t av_clip_int16_c(int a) { if ((a+0x8000) & ~0xFFFF) return (a>>31) ^ 0x7FFF; else return a; } the returns cause me a conversion warning because they need to be cast to int16_t and so I have to change this each time I get a new include for ffmpeg. change to: static av_always_inline av_const int16_t av_clip_int16_c(int a) { if ((a+0x8000) & ~0xFFFF) return (int16_t)((a>>31) ^ 0x7FFF); else return (int16_t)a; } cast return values to (int32_t) for the following: static av_always_inline av_const int32_t av_clipl_int32_c(int64_t a) { if ((a+0x80000000u) & ~UINT64_C(0xFFFFFFFF)) return (a>>63) ^ 0x7FFFFFFF; else return a; } also for this one in libavutil\rational.h cast return values to (int): static inline int av_cmp_q(AVRational a, AVRational b){ const int64_t tmp= a.num * (int64_t)b.den - b.num * (int64_t)a.den; if(tmp) return (int)(((tmp ^ a.den ^ b.den)>>63)|1); else if(b.den && a.den) return 0; else if(a.num && b.num) return (int)((a.num>>31) - (b.num>>31)); else return INT_MIN; } There is no other case I have come across the produces any warnings but these. -- Ticket URL: <https://ffmpeg.org/trac/ffmpeg/ticket/512> FFmpeg <http://ffmpeg.org> FFmpeg issue tracker

1 4

#282(FFmpeg:new): undefined reference to `_avdevice_register_all'
by FFmpeg 20 Nov '13

20 Nov '13

#282: undefined reference to `_avdevice_register_all' -------------------------+------------------------------------------------- Reporter: KSHawkEye | Owner: michael Type: defect | Status: new Priority: critical | Component: FFmpeg Version: git | Keywords: undefined reference Blocked By: | avdevice_register_all Reproduced: 0 | Blocking: | Analyzed: 0 -------------------------+------------------------------------------------- I'm getting: {{{ ffmpeg.c:4514: undefined reference to `_avdevice_register_all' }}} when --disable-static --enable-shared is used, it seems to only happen when --disable-static --enable-shared is used, static builds fine. I believe it is related to the leading underscore _ before avdevice_register_all but I can't confirm that. I'm building for Windows and the toolchain is not the issue. I gave this a critical priority because FFmpeg will not build a shared version for Windows. I'm unsure of what patch broke this, but the last proven working build I know of is git-39dbe9b. -- Ticket URL: <https://ffmpeg.org/trac/ffmpeg/ticket/282> FFmpeg <http://ffmpeg.org> FFmpeg issue tracker

1 33

#678(undetermined:new): Warn that filtering is disabled when copying streams
by FFmpeg 03 Nov '13

03 Nov '13

#678: Warn that filtering is disabled when copying streams -------------------------------------+------------------------------------- Reporter: llogan | Owner: Type: | Status: new enhancement | Component: Priority: wish | undetermined Version: git- | Keywords: master | Blocking: Blocked By: | Analyzed by developer: 0 Reproduced by developer: 0 | -------------------------------------+------------------------------------- Some users assume they can copy a video steam and perform filtering [1]. FFmpeg does not give any feedback that the filter is being ignored. Current behavior: {{{ $ ffmpeg -i hop.mp4 -c copy -vf crop=iw:ih-20 -y out.mpg ffmpeg version N-35078-g7831788, Copyright (c) 2000-2011 the FFmpeg developers built on Nov 22 2011 10:36:32 with gcc 4.6.2 configuration: --prefix=/usr --enable-gpl libavutil 51. 26. 0 / 51. 26. 0 libavcodec 53. 36. 0 / 53. 36. 0 libavformat 53. 21. 0 / 53. 21. 0 libavdevice 53. 4. 0 / 53. 4. 0 libavfilter 2. 49. 0 / 2. 49. 0 libswscale 2. 1. 0 / 2. 1. 0 libpostproc 51. 2. 0 / 51. 2. 0 Input #0, mov,mp4,m4a,3gp,3g2,mj2, from 'hop.mp4': Metadata: major_brand : isom minor_version : 512 compatible_brands: isomiso2avc1mp41 creation_time : 1970-01-01 00:00:00 encoder : Lavf52.32.0 Duration: 00:00:10.13, start: 0.000000, bitrate: 563 kb/s Stream #0:0(und): Video: h264 (High) (avc1 / 0x31637661), yuv420p, 640x480, 559 kb/s, 30 fps, 30 tbr, 30 tbn, 60 tbc Metadata: creation_time : 1970-01-01 00:00:00 handler_name : [mpeg @ 0x1d17860] VBV buffer size not set, muxing may fail Output #0, mpeg, to 'out.mpg': Metadata: major_brand : isom minor_version : 512 compatible_brands: isomiso2avc1mp41 creation_time : 1970-01-01 00:00:00 encoder : Lavf53.21.0 Stream #0:0(und): Video: h264 (avc1 / 0x31637661), yuv420p, 640x480, q=2-31, 559 kb/s, 30 fps, 90k tbn, 30 tbc Metadata: creation_time : 1970-01-01 00:00:00 handler_name : Stream mapping: Stream #0:0 -> #0:0 (copy) Press [q] to stop, [?] for help frame= 304 fps= 0 q=-1.0 Lsize= 700kB time=00:00:10.06 bitrate= 569.6kbits/s video:692kB audio:0kB global headers:0kB muxing overhead 1.166920% }}} Example warning: "Filtering is disabled when copying streams." Of course the message could be more specific as to what streams are affected and what filters are actually disabled. [1] http://ffmpeg.org/pipermail/ffmpeg-user/2011-November/003175.html -- Ticket URL: <https://ffmpeg.org/trac/ffmpeg/ticket/678> FFmpeg <http://ffmpeg.org> FFmpeg issue tracker

1 3