September 2011 - FFmpeg-trac - lists.ffmpeg.org

#258(avformat:new): RTP over UDP: doesn't reorder packets
by FFmpeg 02 Jun '13

02 Jun '13

#258: RTP over UDP: doesn't reorder packets -------------------------+------------------------- Reporter: Andrew | Type: defect Status: new | Priority: normal Component: avformat | Version: git-master Keywords: RTP reorder | Blocked By: Blocking: | Reproduced: 0 Analyzed: 0 | -------------------------+------------------------- muxonly.c source ... ic = avformat_alloc_context(); ic->preload = 1000000; // 1 sec ic->max_delay = 3000000; // 5 sec ap.prealloced_context = 1; ret = av_open_input_file(&ic, argv[1], NULL, 0, &ap); ... while () av_read_frame() ... libavformat/rtpdec.h -#define RTP_REORDER_QUEUE_DEFAULT_SIZE 10 +#define RTP_REORDER_QUEUE_DEFAULT_SIZE 50 ./muxonly 'rtsp://axis1031:554/axis- media/media.amp?video=1&audio=0&videocodec=mpeg4' mov /tmp/test.mov SDP: v=0 o=- 1306917023786450 1306917023786450 IN IP4 axis1031 s=Media Presentation e=NONE c=IN IP4 0.0.0.0 b=AS:8000 t=0 0 a=control:rtsp://axis1031:554/axis- media/media.amp?video=1&audio=0&videocodec=mpeg4 a=range:npt=0.000000- m=video 0 RTP/AVP 96 b=AS:8000 a=framerate:30.0 a=transform:1,0,0;0,1,0;0,0,1 a=control:rtsp://axis1031:554/axis- media/media.amp/trackID=1?video=1&audio=0&videocodec=mpeg4 a=rtpmap:96 MP4V-ES/90000 a=fmtp:96 profile-level-id=245; config=000001B0F5000001B50ECF000001000000012000C88D881F4514043C14103F video codec set to: mpeg4 hello state=0 RTP: missed 3 packets RTP: missed 2 packets RTP: missed 2 packets RTP: missed 1 packets RTP: missed 3 packets RTP: missed 5 packets RTP: missed 2 packets RTP: missed 2 packets RTP: missed 3 packets RTP: missed 4 packets RTP: missed 3 packets RTP: missed 1 packets RTP: missed 5 packets RTP: missed 3 packets RTP: missed 4 packets RTP: missed 4 packets RTP: missed 4 packets RTP: missed 7 packets RTP: missed 4 packets RTP: missed 4 packets RTP: missed 4 packets RTP: missed 6 packets RTP: missed 3 packets RTP: missed 4 packets RTP: missed 6 packets RTP: missed 2 packets RTP: missed 4 packets RTP: missed 5 packets RTP: missed 3 packets RTP: missed 3 packets RTP: missed 2 packets RTP: missed 3 packets RTP: missed 2 packets RTP: missed 5 packets RTP: missed 3 packets RTP: missed 13 packets RTP: missed 29 packets RTP: missed 12 packets RTP: missed 28 packets RTP: missed 3 packets RTP: missed 15 packets RTP: missed 7 packets RTP: missed 8 packets RTP: missed 14 packets RTP: missed 2 packets RTP: missed 9 packets RTP: missed 21 packets RTP: missed 5 packets RTP: missed 28 packets RTP: missed 9 packets RTP: missed 5 packets RTP: missed 8 packets RTP: missed 17 packets RTP: missed 46 packets RTP: missed 3 packets RTP: missed 4 packets RTP: missed 3 packets RTP: missed 1 packets RTP: missed 4 packets RTP: missed 3 packets RTP: missed 2 packets RTP: missed 3 packets RTP: missed 1 packets RTP: missed 5 packets All info found Estimating duration from bitrate, this may be inaccurate Input #0, rtsp, from 'rtsp://axis1031:554/axis- media/media.amp?video=1&audio=0&videocodec=mpeg4': Metadata: title : Media Presentation Duration: N/A, start: 3.690289, bitrate: N/A Stream #0.0, 22, 1/90000: Video: mpeg4, yuv420p, 640x480 [PAR 1:1 DAR 4:3], 1k tbr, 90k tbn, 1k tbc AVFormatContext: start_time = 3690289 (1/1000000) 3.690 sec AVStream: start_time = 332126 (1/90000) 3.690 sec, first_dts = 332126 3.690 sec Output #0, mov, to '/tmp/test.mov': Stream #0.0, 0, 1/90000: Video: mpeg4, yuv420p, 640x480, q=2-31, 90k tbn, 90k tbc Output #0, mov, to '/tmp/test.mov': Metadata: encoder : Lavf53.2.0 Stream #0.0, 0, 1/90000: Video: mpeg4, yuv420p, 640x480, q=2-31, 90k tbn, 90k tbc -- Ticket URL: <https://ffmpeg.org/trac/ffmpeg/ticket/258> FFmpeg <http://ffmpeg.org> FFmpeg issue tracker

1 5

#419(undetermined:new): rtsp:// doesn't support any port number other than 80
by FFmpeg 02 Jun '13

02 Jun '13

#419: rtsp:// doesn't support any port number other than 80 --------------------------+-------------------------- Reporter: uscgraphics | Type: defect Status: new | Priority: normal Component: undetermined | Version: unspecified Keywords: | Blocked By: Blocking: | Reproduced: 0 Analyzed: 0 | --------------------------+-------------------------- rtsp:// doesn't support any port number other than 80 for tcp and udp (http works fine). e.g. rtsp://xxx.xxx.xxx.xxx:8080/axis-media/media.amp?tcp will return [rtsp @ 0057B0E0] CSeq 1 expected, 0 received. [rtsp @ 0057B0E0] method OPTIONS failed: 501 Not Implemented [rtsp @ 0057B0E0] Date: Wed, 03 Aug 2011 19:18:56 GMT Accept-Ranges: bytes Connection: close Content-Type: text/html; charset=ISO-8859-1 rtsp://xxx.xxx.xxx.xxx:8080/axis-media/media.amp?tcp : Invalid data found when processing input Using rtsp://xxx.xxx.xxx.xxx:8080/axis-media/media.amp?http works great. -- Ticket URL: <http://avcodec.org/trac/ffmpeg/ticket/419> FFmpeg <http://ffmpeg.org> FFmpeg issue tracker

1 1

#24(FFmpeg:new): Error message needed when enabling drawtext filter without libfreetype
by FFmpeg 02 Jun '13

02 Jun '13

#24: Error message needed when enabling drawtext filter without libfreetype -------------------------+------------------------------------------------- Reporter: xj25vm | Owner: michael Type: | Status: new enhancement | Component: FFmpeg Priority: normal | Keywords: configure libfreetype drawtext Version: git | filter Blocked By: | Blocking: Reproduced: 0 | Analyzed: 0 -------------------------+------------------------------------------------- It would be really helpful if the configure script would issue an error message when trying to do "--enable-filter=drawtext" without adding "--enable-libfreetype". At the moment, there is no error message, and the drawtext filter doesn't get enabled. The documentation of the drawtext filter does mention then libfreetype is needed - but it would be much more helpful if the configure script would do this check. Otherwise one would have no idea why the filter silently refuses to enable with no error message. -- Ticket URL: <https://ffmpeg.org/trac/ffmpeg/ticket/24> FFmpeg <http://ffmpeg.org> FFmpeg issue tracker

1 2

#80(undetermined:new): matrox mmes codec + lowres option = crash
by FFmpeg 01 Jun '13

01 Jun '13

#80: matrox mmes codec + lowres option = crash --------------------------+-------------------------- Reporter: ami_stuff | Type: defect Status: new | Priority: normal Component: undetermined | Version: unspecified Keywords: | Blocked By: Blocking: | Reproduced: 0 Analyzed: 0 | --------------------------+-------------------------- matrox mmes codec crashes with lowres option enabled (ffmpeg & ffplay) http://samples.multimedia.cx/V-codecs/MMES/matrox_bad_gops.avi ffmpeg -vlowres 1 -i matrox_bad_gops.avi out.avi {{{ C:\>ffmpeg -i "C:\matrox_bad_gops.avi" FFmpeg version git-N-29181-ga304071, Copyright (c) 2000-2011 the FFmpeg develope rs built on Apr 18 2011 21:24:03 with gcc 4.5.2 configuration: --enable-gpl --enable-version3 --enable-runtime-cpudetect --ena ble-memalign-hack --enable-avisynth --enable-bzlib --enable-frei0r --enable-libo pencore-amrnb --enable-libopencore-amrwb --enable-libfreetype --enable- libgsm -- enable-libmp3lame --enable-libopenjpeg --enable-librtmp --enable- libschroedinger --enable-libspeex --enable-libtheora --enable-libvorbis --enable-libvpx --enabl e-libx264 --enable-libxavs --enable-libxvid --enable-zlib --cross- prefix=i686-w6 4-mingw32- --target-os=mingw32 --arch=x86_32 --extra- cflags=-I/home/kyle/softwar e/ffmpeg/external-libraries/win32/include --extra- ldflags=-L/home/kyle/software/ ffmpeg/external-libraries/win32/lib --pkg-config=pkg-config libavutil 50. 40. 1 / 50. 40. 1 libavcodec 52.120. 0 / 52.120. 0 libavformat 52.108. 0 / 52.108. 0 libavdevice 52. 4. 0 / 52. 4. 0 libavfilter 1. 79. 0 / 1. 79. 0 libswscale 0. 13. 0 / 0. 13. 0 [mpeg2video @ 022721B0] mpeg_decode_postinit() failure [avi @ 01CEC000] max_analyze_duration reached Seems stream 0 codec frame rate differs from container frame rate: 50.00 (50/1) -> 6.25 (25/4) Input #0, avi, from 'C:\matrox_bad_gops.avi': Metadata: encoder : Lavf52.68.0 Duration: 00:02:00.04, start: 0.000000, bitrate: 698 kb/s Stream #0.0: Video: mpeg2video (4:2:2), yuv422p, 720x576 [PAR 16:15 DAR 4:3] , 15000 kb/s, 25 fps, 6.25 tbr, 25 tbn, 50 tbc Stream #0.1: Audio: pcm_s16le, 48000 Hz, 2 channels, s16, 1536 kb/s At least one output file must be specified }}} -- Ticket URL: <https://ffmpeg.org/trac/ffmpeg/ticket/80> FFmpeg <http://ffmpeg.org> FFmpeg issue tracker

1 4

#244(undetermined:new): add a check for input picture size in rv10/rv20 encoders
by FFmpeg 30 May '13

30 May '13

#244: add a check for input picture size in rv10/rv20 encoders --------------------------+-------------------------- Reporter: ami_stuff | Type: defect Status: new | Priority: normal Component: undetermined | Version: unspecified Keywords: | Blocked By: Blocking: | Reproduced: 0 Analyzed: 0 | --------------------------+-------------------------- pbm file: https://ffmpeg.org/trac/ffmpeg/ticket/193 When I convert "bikerace.pbm" file to rv10 ffmpeg -i C:\bikerace.pbm -vcodec rv10 out.rm everything works ok, but when I try to decode it I get error: {{{ C:\>ffmpeg -i out.rm out.avi ffmpeg version git-N-30155-g01a73d6, Copyright (c) 2000-2011 the FFmpeg develope rs built on May 23 2011 03:43:18 with gcc 4.5.3 configuration: --enable-gpl --enable-version3 --enable-memalign-hack --enable- runtime-cpudetect --enable-avisynth --enable-bzlib --enable-frei0r --enable-libo pencore-amrnb --enable-libopencore-amrwb --enable-libfreetype --enable- libgsm -- enable-libmp3lame --enable-libopenjpeg --enable-librtmp --enable- libschroedinger --enable-libspeex --enable-libtheora --enable-libvorbis --enable-libvpx --enabl e-libx264 --enable-libxavs --enable-libxvid --enable-zlib --pkg-config =pkg-confi g libavutil 51. 2. 1 / 51. 2. 1 libavcodec 53. 6. 0 / 53. 6. 0 libavformat 53. 2. 0 / 53. 2. 0 libavdevice 53. 0. 0 / 53. 0. 0 libavfilter 2. 10. 0 / 2. 10. 0 libswscale 0. 14. 0 / 0. 14. 0 libpostproc 51. 2. 0 / 51. 2. 0 Input #0, rm, from 'out.rm': Metadata: title : author : copyright : comment : Duration: 00:00:00.04, start: 0.000000, bitrate: 33538 kb/s Stream #0.0: Video: rv10, yuv420p, 550x423, 200 kb/s, 25 tbr, 1k tbn, 25 tbc [buffer @ 01DE1620] w:550 h:423 pixfmt:yuv420p tb:1/1000000 sar:0/1 sws_param: Output #0, avi, to 'out.avi': Metadata: INAM : author : ICOP : ICMT : ISFT : Lavf53.2.0 Stream #0.0: Video: mpeg4, yuv420p, 550x423, q=2-31, 200 kb/s, 25 tbn, 25 tb c Stream mapping: Stream #0.0 -> #0.0 Press [q] to stop, [?] for help [rv10 @ 02360780] illegal ac vlc code at 15x7 [rv10 @ 02360780] ERROR at MB 15 7 frame= 0 fps= 0 q=0.0 Lsize= 6kB time=10000000000.00 bitrate= 0.0kbi ts/s video:0kB audio:0kB global headers:0kB muxing overhead 1.#INF00% }}} I think this is a bug in RV10 / RV20 encoder that it doesn't check which picture sizes are valid for this codec, so probably a check like for H263 codec should be added to these codecs as well (I don't know which picture sizes are valid for RV10 and RV10, but for example 320x240 resolution seems to work correctly, but for example is not allowed for h263). libavcodec/mpegvideo_env.c: {{{ case CODEC_ID_H263: if (!CONFIG_H263_ENCODER) return -1; if (ff_match_2uint16(h263_format, FF_ARRAY_ELEMS(h263_format), s->width, s->height) == 8) { av_log(avctx, AV_LOG_ERROR, "The specified picture size of %dx%d is not valid for the H.263 codec.\nValid sizes are 128x96, 176x144, 352x288, 704x576, and 1408x1152. Try H.263+.\n", s->width, s->height); return -1; } s->out_format = FMT_H263; s->obmc= (avctx->flags & CODEC_FLAG_OBMC) ? 1:0; avctx->delay=0; s->low_delay=1; break; [...] case CODEC_ID_RV10: s->out_format = FMT_H263; avctx->delay=0; s->low_delay=1; break; case CODEC_ID_RV20: s->out_format = FMT_H263; avctx->delay=0; s->low_delay=1; s->modified_quant=1; s->h263_aic=1; s->h263_plus=1; s->loop_filter=1; s->unrestricted_mv= 0; break; }}} -- Ticket URL: <https://ffmpeg.org/trac/ffmpeg/ticket/244> FFmpeg <http://ffmpeg.org> FFmpeg issue tracker

1 3

#412(undetermined:new): .smv container support
by FFmpeg 30 May '13

30 May '13

#412: .smv container support --------------------------+-------------------------- Reporter: iohanntachy | Type: enhancement Status: new | Priority: wish Component: undetermined | Version: unspecified Keywords: | Blocked By: Blocking: | Reproduced: 0 Analyzed: 0 | --------------------------+-------------------------- First of all sorry the bad english. SMV file is used in portable media players with SigmaTel chip. SMV files start with WAV header, so it plays as if was an wav file, without video. MultimediaWiki explain this kind of file (it even gives the meaning of each part of the header) http://wiki.multimedia.cx/index.php?title=SMV .SMV video samples: http://samples.mplayerhq.hu/smv/ I think it's not very hard to implement this kind of container. I would be very apreciated if you guys consider implementing this. -- Ticket URL: <https://ffmpeg.org/trac/ffmpeg/ticket/412> FFmpeg <http://ffmpeg.org> FFmpeg issue tracker

1 4

#75(avcodec:new): Chroma corruption with specific Fraps sample
by FFmpeg 21 May '13

21 May '13

#75: Chroma corruption with specific Fraps sample --------------------------+--------------------- Reporter: Snowknight26 | Type: defect Status: new | Priority: normal Component: avcodec | Version: git Keywords: | Blocked By: Blocking: | Reproduced: 0 Analyzed: 0 | --------------------------+--------------------- With a specific sample (http://stfcc.org/misc/fraps_chroma_corruption.avi - ~48MB), chroma corruption is produced on at least two different frames after the decoding process. With the same frame, note the difference between FFmpeg's output and the Fraps video decompresser's: FFmpeg: http://stfcc.org/misc/fraps_chroma_corruption_ffmpeg.png Fraps: http://stfcc.org/misc/fraps_chroma_corruption_fraps.png Below output was for converion to huffyuv so it could be viewed in ffplay (ffplay doesn't display video for Fraps it seems): {{{ C:\temp\Encoding\test>ffmpeg.exe -v 9 -loglevel 99 -i fraps_chroma_corruption.avi -vcodec huffyuv -pix_fmt rgb32 -y output.avi FFmpeg version git-N-29181-ga304071, Copyright (c) 2000-2011 the FFmpeg developers built on Apr 18 2011 21:24:03 with gcc 4.5.2 configuration: --enable-gpl --enable-version3 --enable-runtime-cpudetect --enable-memalign-hack --enable-avisynth --enable-bzlib --enable-frei0r --enable-libopencore-amrnb --enable-libopencore-amrwb --enable-libfreetype --enable-libgsm --enable-libmp3lame --enable-libopenjpeg --enable-librtmp --enable-libschroedinger --enable-libspeex --enable-libtheora --enable- libvorbis --enable-libvpx --enable-libx264 --enable-libxavs --enable- libxvid --enable-zlib --cross-prefix=i686-w64-mingw32- --target-os=mingw32 --arch=x86_32 --extra-cflags=-I/home/kyle/software/ffmpeg/external- libraries/win32/include --extra-ldflags=-L/home/kyle/software/ffmpeg /external-libraries/win32/lib --pkg-config=pkg-config libavutil 50. 40. 1 / 50. 40. 1 libavcodec 52.120. 0 / 52.120. 0 libavformat 52.108. 0 / 52.108. 0 libavdevice 52. 4. 0 / 52. 4. 0 libavfilter 1. 79. 0 / 1. 79. 0 libswscale 0. 13. 0 / 0. 13. 0 [NULL @ 018BBE60] Probed with size=2048 and score=100 [avi @ 018BBE60] All info found Input #0, avi, from 'fraps_chroma_corruption.avi': Duration: 00:00:01.51, start: 0.000000, bitrate: 260416 kb/s Stream #0.0, 1, 1/60: Video: fraps, bgr24, 960x540, 1/60, 60 tbr, 60 tbn, 60 tbc [buffer @ 01747A30] w:960 h:540 pixfmt:bgr24 [ffsink @ 01747C30] auto-inserting filter 'auto-inserted scaler 0' between the filter 'src' and the filter 'out' [scale @ 01747E90] w:960 h:540 fmt:bgr24 -> w:960 h:540 fmt:bgra flags:0x4 [huffyuv @ 01751A70] using huffyuv 2.2.0 or newer interlacing flag Output #0, avi, to 'output.avi': Metadata: ISFT : Lavf52.108.0 Stream #0.0, 0, 1/60: Video: huffyuv, bgra, 960x540, 1/60, q=2-31, 200 kb/s, 60 tbn, 60 tbc Stream mapping: Stream #0.0 -> #0.0 Press [q] to stop encoding frame= 91 fps= 60 q=0.0 Lsize= 70979kB time=1.52 bitrate=383378.5kbits/s video:70971kB audio:0kB global headers:0kB muxing overhead 0.010824% }}} -- Ticket URL: <https://ffmpeg.org/trac/ffmpeg/ticket/75> FFmpeg <http://ffmpeg.org> FFmpeg issue tracker

1 3

#358(undetermined:new): MMS(MMSH) seeking/skipping freezes video
by FFmpeg 17 May '13

17 May '13

#358: MMS(MMSH) seeking/skipping freezes video --------------------------+-------------------------- Reporter: arnova | Type: defect Status: new | Priority: normal Component: undetermined | Version: unspecified Keywords: mms | Blocked By: Blocking: | Reproduced: 0 Analyzed: 0 | --------------------------+-------------------------- When trying to seek/skip through a streamed video using the MMS/MMSH protocols, FFmpeg/FFPlay freezes. I first encountered this problem in XBMC but FFPlay experiences the same behaviour. I've tested it with several Dutch streams, which all show the problem. It works fine when I use an older version of XBMC which uses libmms so it seems to be a problem FFmpeg's implementation. The commandline/output from ffplay looks like this: (1000 ~/ffmpeg)% ./ffplay "mmsh://bolt01.omroep.nl/public/ug- od/wm/50/media/wm50c1/ceres/1/kro/rest/2009/KRO_1336806/bb.20090611.asf?wmt=4e292053&wmhash=15605a15" ffplay version N-31601-gba99474, Copyright (c) 2003-2011 the FFmpeg developers built on Jul 22 2011 08:56:44 with gcc 4.4.3 configuration: libavutil 51. 11. 0 / 51. 11. 0 libavcodec 53. 8. 0 / 53. 8. 0 libavformat 53. 6. 0 / 53. 6. 0 libavdevice 53. 2. 0 / 53. 2. 0 libavfilter 2. 27. 2 / 2. 27. 2 libswscale 2. 0. 0 / 2. 0. 0 Input #0, asf, from 'mmsh://bolt01.omroep.nl/public/ug- od/wm/50/media/wm50c1/ceres/1/kro/rest/2009/KRO_1336806/bb.20090611.asf?wmt=4e292053&wmhash=15605a15': Metadata: WMFSDKVersion : 10.00.00.4001 WMFSDKNeeded : 0.0.0.0000 IsVBR : 0 Duration: 00:10:09.14, start: 0.000000, bitrate: N/A Stream #0.0(eng): Video: wmv3 (Main), yuv420p, 320x180, 452 kb/s, 25 tbr, 1k tbn, 1k tbc Stream #0.1(eng): Audio: wmav2, 44100 Hz, 2 channels, s16, 48 kb/s ALSA lib pcm.c:7245:(snd_pcm_recover) underrun occuredB sq= 0B f=0/0 Read data packet header failed! 0KB vq= 0KB sq= 0B f=0/0 f=0/0 Recv other type packet -5 Read data packet header failed! Recv other type packet -5 [asf @ 0x8f3a120] asf_read_pts failed mmsh://bolt01.omroep.nl/public/ug- od/wm/50/media/wm50c1/ceres/1/kro/rest/2009/KRO_1336806/bb.20090611.asf?wmt=4e292053&wmhash=15605a15: error while seeking Read data packet header failed! Recv other type packet -5 -- Ticket URL: <https://ffmpeg.org/trac/ffmpeg/ticket/358> FFmpeg <http://ffmpeg.org> FFmpeg issue tracker

1 10

#134(avcodec:new): Implement optimal Huffman tables for (M)JPEG encoding
by FFmpeg 12 May '13

12 May '13

#134: Implement optimal Huffman tables for (M)JPEG encoding --------------------------+--------------------- Reporter: cehoyos | Owner: Type: enhancement | Status: new Priority: wish | Component: avcodec Version: git-master | Keywords: Blocked By: | Blocking: Reproduced: 0 | Analyzed: 0 --------------------------+--------------------- (issue 267) See http://guru.multimedia.cx/small-tasks-for-ffmpeg/ for an explanation of the task. -- Ticket URL: <https://avcodec.org/trac/ffmpeg/ticket/134> FFmpeg <http://ffmpeg.org> FFmpeg issue tracker

1 3

#110(avformat:new): MP4 Muxer gives incorrect frame duration with AAC
by FFmpeg 12 May '13

12 May '13

#110: MP4 Muxer gives incorrect frame duration with AAC ------------------------+------------------------ Reporter: thebombzen | Type: defect Status: new | Priority: important Component: avformat | Version: git Keywords: | Blocked By: Blocking: | Reproduced: 0 Analyzed: 0 | ------------------------+------------------------ The frame durations of an MP4/AAC file are inaccurate according to FAAD. I encoded an M4A file with ffmpeg -v 9 -loglevel 99 -i IJustHadSex.m4v -vn -acodec copy -map_metadata 0:0 "I Just Had Sex.m4a" The full uncut output is this: FFmpeg version git-N-29123-g256c5b0, Copyright (c) 2000-2011 the FFmpeg developers built on Apr 14 2011 21:24:32 with gcc 4.7.0 20110402 (experimental) configuration: --enable-cross-compile --arch=x86_64 --target-os=mingw32 --cross-prefix=/usr/x86_64-w64-mingw32/bin/ --prefix=/usr/local/x86_64-w64-mingw32 --pkg-config=pkg-config --cpu=i7 libavutil 50. 40. 1 / 50. 40. 1 libavcodec 52.119. 0 / 52.119. 0 libavformat 52.107. 0 / 52.107. 0 libavdevice 52. 4. 0 / 52. 4. 0 libavfilter 1. 78. 0 / 1. 78. 0 libswscale 0. 13. 0 / 0. 13. 0 [NULL @ 000000000033A770] Probed with size=2048 and score=100 [mov,mp4,m4a,3gp,3g2,mj2 @ 000000000033A770] ISO: File Type Major Brand: M4V [h264 @ 000000000033B7B0] Unsupported bit depth: 0 [mov,mp4,m4a,3gp,3g2,mj2 @ 000000000033A770] All info found Seems stream 0 codec frame rate differs from container frame rate: 47.96 (1199/25) -> 23.98 (1199/50) Input #0, mov,mp4,m4a,3gp,3g2,mj2, from 'IJustHadSex.m4v': Metadata: major_brand : M4V minor_version : 512 compatible_brands: isomiso2avc1 creation_time : 1970-01-01 00:00:00 encoder : Lavf52.104.0 title : I Just Had Sex (feat. Akon) artist : The Lonely Island album : Incredibad Duration: 00:02:55.31, start: 0.000000, bitrate: 1306 kb/s Stream #0.0(und), 2, 1/1199: Video: h264 (Constrained Baseline), yuv420p, 640x360 [PAR 1:1 DAR 16:9], 25/1199, 1171 kb/s, 23.98 fps, 23.98 tbr, 1199 tbn, 47.96 tbc Metadata: creation_time : 1970-01-01 00:00:00 Stream #0.1(und), 1, 1/44100: Audio: aac, 44100 Hz, stereo, s16, 128 kb/s Metadata: creation_time : 1970-01-01 00:00:00 Output #0, ipod, to 'I Just Had Sex.m4a': Metadata: major_brand : M4V minor_version : 512 compatible_brands: isomiso2avc1 creation_time : 1970-01-01 00:00:00 album : Incredibad title : I Just Had Sex (feat. Akon) artist : The Lonely Island encoder : Lavf52.107.0 Stream #0.0(und), 0, 1/44100: Audio: aac, 44100 Hz, stereo, 128 kb/s Metadata: creation_time : 1970-01-01 00:00:00 Stream mapping: Stream #0.1 -> #0.0 Press [q] to stop encoding size= 2845kB time=175.31 bitrate= 132.9kbits/s video:0kB audio:2739kB global headers:0kB muxing overhead 3.847214% The full ffmpeg -v 9 -loglevel 99 -i for the new input file is this: FFmpeg version git-N-29123-g256c5b0, Copyright (c) 2000-2011 the FFmpeg developers built on Apr 14 2011 21:24:32 with gcc 4.7.0 20110402 (experimental) configuration: --enable-cross-compile --arch=x86_64 --target-os=mingw32 --cross-prefix=/usr/x86_64-w64-mingw32/bin/ --prefix=/usr/local/x86_64-w64-mingw32 --pkg-config=pkg-config --cpu=i7 libavutil 50. 40. 1 / 50. 40. 1 libavcodec 52.119. 0 / 52.119. 0 libavformat 52.107. 0 / 52.107. 0 libavdevice 52. 4. 0 / 52. 4. 0 libavfilter 1. 78. 0 / 1. 78. 0 libswscale 0. 13. 0 / 0. 13. 0 [NULL @ 00000000014BA410] Probed with size=2048 and score=100 [mov,mp4,m4a,3gp,3g2,mj2 @ 00000000014BA410] ISO: File Type Major Brand: M4A [mov,mp4,m4a,3gp,3g2,mj2 @ 00000000014BA410] All info found Input #0, mov,mp4,m4a,3gp,3g2,mj2, from 'I Just Had Sex.m4a': Metadata: major_brand : M4A minor_version : 512 compatible_brands: isomiso2 creation_time : 1970-01-01 00:00:00 title : I Just Had Sex (feat. Akon) artist : The Lonely Island album : Incredibad encoder : Lavf52.107.0 Duration: 00:02:55.31, start: 0.000000, bitrate: 132 kb/s Stream #0.0(und), 1, 1/44100: Audio: aac, 44100 Hz, stereo, s16, 128 kb/s Metadata: creation_time : 1970-01-01 00:00:00 At least one output file must be specified However, FAAD claims that the frame duration is inaccurate for the MP4, and that it has to use the duration listed in the AAC bitstream instead. Furthermore, iTunes says the file has a duration of 789:57:13, which is iTunes's way of saying Error! The FAAD output is this: *********** Ahead Software MPEG-4 AAC Decoder V2.7 ****************** Build: Jun 14 2010 Copyright 2002-2004: Ahead Software AG http://www.audiocoding.com Floating point version This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License. ************************************************************************** I Just Had Sex.m4a file info: LC AAC 175.139 secs, 2 ch, 44100 Hz title: I Just Had Sex (feat. Akon) artist: The Lonely Island album: Incredibad tool: Lavf52.107.0 --------------------- | Config: 2 Ch | --------------------- | Ch | Position | --------------------- | 00 | Left front | | 01 | Right front | --------------------- MP4 seems to have incorrect frame duration, using values from AAC data. Decoding I Just Had Sex.m4a took: 0.84 sec. 208.00% real-time. Notice the MP4 error. This is important because iTunes won't play the resulting file. -- Ticket URL: <http://ffmpeg.org/trac/ffmpeg/ticket/110> FFmpeg <http://ffmpeg.org> FFmpeg issue tracker

1 11