November 2012 - FFmpeg-trac - lists.ffmpeg.org

#1539(avcodec:new): ModPlug compile bug
by FFmpeg 03 Oct '13

03 Oct '13

#1539: ModPlug compile bug ----------------------------------+--------------------------------------- Reporter: chinshou | Type: defect Status: new | Priority: normal Component: avcodec | Version: unspecified Keywords: | Blocked By: Blocking: | Reproduced by developer: 0 Analyzed by developer: 0 | ----------------------------------+--------------------------------------- Summary of the bug: when compile the ffmpeg with libmodplug --enable-libmodplug , gcc reported following error operator new [] unresolved error Fix: add stdc++ library to link parameters. Patch attached. -- Ticket URL: <https://ffmpeg.org/trac/ffmpeg/ticket/1539> FFmpeg <http://ffmpeg.org> FFmpeg issue tracker

1 11

#1753(undetermined:new): Delay output for X seconds
by FFmpeg 30 Sep '13

30 Sep '13

#1753: Delay output for X seconds -------------------------------------+------------------------------------- Reporter: burek | Type: Status: new | enhancement Component: | Priority: wish undetermined | Version: Keywords: | unspecified Blocking: | Blocked By: Analyzed by developer: 0 | Reproduced by developer: 0 -------------------------------------+------------------------------------- It would be nice to add a feature where the output could be delayed for certain amount of time (specified in seconds or hh:mm:ss.mmm). One use case for this might be the case where we want to capture the video, only when a certain event occurs (like lightning bolt, robbery or trespassing for example). If we start capturing the output at that exact moment, we might loose some valuable time, but if the output was buffered, then capturing would start in the past, enabling people to record an important event. How to make use of the feature? Start one ffmpeg to capture and buffer the webcam input (the output will start after 10 seconds and will continue real-time, always being late for 10 seconds, comparing to the current time): {{{ ffmpeg -f v4l2 -i /dev/video0 -vf delay 10 -af delay 10 -f mpegts udp://localhost:1234 }}} Start another ffmpeg only when some important event occurs (triggered by the sensor or something similar): {{{ ffmpeg -f mpegts -i udp://localhost:1234 -map 0 -c copy capture.avi }}} Obviously capture.avi will start recording from the past, considering the current time the event was triggered, which will allow the beginning of the event to get recorded as well. -- Ticket URL: <https://ffmpeg.org/trac/ffmpeg/ticket/1753> FFmpeg <http://ffmpeg.org> FFmpeg issue tracker

1 11

#1275(undetermined:new): ffserver x264 presets
by FFmpeg 28 Sep '13

28 Sep '13

#1275: ffserver x264 presets -------------------------------------+------------------------------------- Reporter: burek | Type: defect Status: new | Priority: normal Component: | Version: undetermined | unspecified Keywords: | Blocked By: Blocking: | Reproduced by developer: 0 Analyzed by developer: 0 | -------------------------------------+------------------------------------- ffserver is started with a simple config file (ffserver.conf) that defined only libx264 flv output and ffmpeg is started to feed the ffserver after which the error is received, which I don't know how to get around, because I don't know how to set "-vpre" or "-preset" in ffserver.conf file (when I try to set -vpre or -preset at ffmpeg's command line, I get the same error as provided here): ffserver.conf: {{{ Port 8090 BindAddress 0.0.0.0 CustomLog - <Feed feed1.ffm> File /tmp/feed1.ffm FileMaxSize 200K ACL allow 127.0.0.1 </Feed> <Stream test1.flv> Feed feed1.ffm Format flv NoAudio VideoCodec libx264 VideoFrameRate 25 AVOptionVideo flags +global_header </Stream> <Stream stat.html> Format status ACL allow localhost ACL allow 192.168.0.0 192.168.255.255 </Stream> <Redirect index.html> URL http://www.ffmpeg.org/ </Redirect> }}} the result: {{{ # ffserver -d -f ffserver.conf & # ffmpeg -i http://10.1.2.3:45678 -vf yadif http://localhost:8090/feed1.ffm ffmpeg version git-2012-05-03-28d37f7 Copyright (c) 2000-2012 the FFmpeg developers built on May 3 2012 13:43:26 with gcc 4.6.3 configuration: --enable-gpl --enable-libfaac --enable-libmp3lame --enable-libopencore-amrnb --enable-libopencore-amrwb --enable-libtheora --enable-libvorbis --enable-libvpx --enable-libx264 --enable-nonfree --enable-version3 libavutil 51. 49.100 / 51. 49.100 libavcodec 54. 17.101 / 54. 17.101 libavformat 54. 3.100 / 54. 3.100 libavdevice 53. 4.100 / 53. 4.100 libavfilter 2. 72.104 / 2. 72.104 libswscale 2. 1.100 / 2. 1.100 libswresample 0. 11.100 / 0. 11.100 libpostproc 52. 0.100 / 52. 0.100 [mpeg2video @ 0x2232c40] mpeg_decode_postinit() failure Last message repeated 5 times [mpegts @ 0x222d120] max_analyze_duration 5000000 reached at 5016000 [mpegts @ 0x222d120] Estimating duration from bitrate, this may be inaccurate Input #0, mpegts, from 'http://10.1.2.3:45678': Duration: N/A, start: 1787.574700, bitrate: 15256 kb/s Program 1714 Stream #0:0[0x58c]: Video: mpeg2video (Main) ([2][0][0][0] / 0x0002), yuv420p, 720x576 [SAR 64:45 DAR 16:9], 15000 kb/s, 25.82 fps, 25 tbr, 90k tbn, 50 tbc Stream #0:1[0x596]: Audio: mp2 ([3][0][0][0] / 0x0003), 48000 Hz, stereo, s16, 256 kb/s [buffer @ 0x2428500] w:720 h:576 pixfmt:yuv420p tb:1/1000000 sar:64/45 sws_param:flags=2 [scale @ 0x2233f60] w:720 h:576 fmt:yuv420p sar:64/45 -> w:160 h:128 fmt:yuv420p sar:64/45 flags:0x4 [libx264 @ 0x2277080] broken ffmpeg default settings detected [libx264 @ 0x2277080] use an encoding preset (e.g. -vpre medium) [libx264 @ 0x2277080] preset usage: -vpre <speed> -vpre <profile> [libx264 @ 0x2277080] speed presets are listed in x264 --help [libx264 @ 0x2277080] profile is optional; x264 defaults to high Output #0, ffm, to 'http://localhost:8090/feed1.ffm': Stream #0:0: Video: h264, yuv420p, 160x128 [SAR 64:45 DAR 16:9], q=2-31, 128 kb/s, 1000k tbn, 25 tbc Stream mapping: Stream #0:0 -> #0:0 (mpeg2video -> libx264) Error while opening encoder for output stream #0:0 - maybe incorrect parameters such as bit_rate, rate, width or height }}} Generally, when I start ffmpeg only (without ffserver) no matter what libx264 options I give at cmd line, ffmpeg will fill out other (missing) options, like bitrate, width/height, etc with some default values. When I use ffserver with same ffmpeg cmd lines, I usually get this kind of "vpre error" mentioned above. How can I work around that error? Please help, thanks in advance. -- Ticket URL: <https://ffmpeg.org/trac/ffmpeg/ticket/1275> FFmpeg <http://ffmpeg.org> FFmpeg issue tracker

1 12

#738(avcodec:new): libacvodec cannot be built if it configured with "--disable-optimizations"
by FFmpeg 23 Sep '13

23 Sep '13

#738: libacvodec cannot be built if it configured with "--disable-optimizations" ---------------------------------+-------------------------------------- Reporter: Andrew | Type: defect Status: new | Priority: minor Component: avcodec | Version: git-master Keywords: | Blocked By: Blocking: | Reproduced by developer: 0 Analyzed by developer: 0 | ---------------------------------+-------------------------------------- In file included from libavcodec/cabac.h:60, from libavcodec/cabac.c:31: libavcodec/x86/cabac.h: In function ‘get_cabac_bypass_sign_x86’: libavcodec/x86/cabac.h:107: error: can't find a register in class ‘GENERAL_REGS’ while reloading ‘asm’ libavcodec/x86/cabac.h:107: error: ‘asm’ operand has impossible constraints make: *** [libavcodec/cabac.o] Error 1 -- Ticket URL: <https://ffmpeg.org/trac/ffmpeg/ticket/738> FFmpeg <http://ffmpeg.org> FFmpeg issue tracker

1 10

#1847(undetermined:new): wmalossless: support 24bit depth
by FFmpeg 21 Sep '13

21 Sep '13

#1847: wmalossless: support 24bit depth -------------------------------------+------------------------------------- Reporter: ami_stuff | Owner: Type: defect | Status: new Priority: normal | Component: Version: | undetermined unspecified | Keywords: Blocked By: | Blocking: Reproduced by developer: 0 | Analyzed by developer: 0 -------------------------------------+------------------------------------- http://www.cccp- project.net/beta/test_files/%5bCCCP%5d_Mega_Weird_Audio_Test.mkv {{{ C:\>ffmpeg -i [CCCP]_Mega_Weird_Audio_Test.mkv -map 0:23 out.wav ffmpeg version N-45739-g04bf2e7 Copyright (c) 2000-2012 the FFmpeg developers built on Oct 20 2012 00:16:49 with gcc 4.7.2 (GCC) configuration: --enable-gpl --enable-version3 --disable-pthreads --enable-runt ime-cpudetect --enable-avisynth --enable-bzlib --enable-frei0r --enable- libass - -enable-libopencore-amrnb --enable-libopencore-amrwb --enable-libfreetype --enab le-libgsm --enable-libmp3lame --enable-libnut --enable-libopenjpeg --enable-libo pus --enable-librtmp --enable-libschroedinger --enable-libspeex --enable- libtheo ra --enable-libutvideo --enable-libvo-aacenc --enable-libvo-amrwbenc --enable-li bvorbis --enable-libvpx --enable-libx264 --enable-libxavs --enable-libxvid --ena ble-zlib libavutil 51. 76.100 / 51. 76.100 libavcodec 54. 67.100 / 54. 67.100 libavformat 54. 33.100 / 54. 33.100 libavdevice 54. 3.100 / 54. 3.100 libavfilter 3. 19.103 / 3. 19.103 libswscale 2. 1.101 / 2. 1.101 libswresample 0. 16.100 / 0. 16.100 libpostproc 52. 1.100 / 52. 1.100 [wmalossless @ 0245fc20] bit-depth higher than 16 is not implemented. Update you r FFmpeg version to the newest one from Git. If the problem still occurs, it mea ns that your file has a feature which has not been implemented. [wmalossless @ 025ccae0] bit-depth higher than 16 is not implemented. Update you r FFmpeg version to the newest one from Git. If the problem still occurs, it mea ns that your file has a feature which has not been implemented. [mpeg4 @ 02537bc0] Invalid and inefficient vfw-avi packed B frames detected [wmalossless @ 0245fc20] bit-depth higher than 16 is not implemented. Update you r FFmpeg version to the newest one from Git. If the problem still occurs, it mea ns that your file has a feature which has not been implemented. [wmalossless @ 025ccae0] bit-depth higher than 16 is not implemented. Update you r FFmpeg version to the newest one from Git. If the problem still occurs, it mea ns that your file has a feature which has not been implemented. Guessed Channel Layout for Input Stream #0.5 : mono Guessed Channel Layout for Input Stream #0.6 : stereo Guessed Channel Layout for Input Stream #0.7 : stereo Guessed Channel Layout for Input Stream #0.8 : mono Guessed Channel Layout for Input Stream #0.9 : mono Guessed Channel Layout for Input Stream #0.10 : stereo Guessed Channel Layout for Input Stream #0.11 : stereo Guessed Channel Layout for Input Stream #0.12 : mono Guessed Channel Layout for Input Stream #0.13 : mono Guessed Channel Layout for Input Stream #0.14 : stereo Guessed Channel Layout for Input Stream #0.15 : stereo Guessed Channel Layout for Input Stream #0.16 : mono Guessed Channel Layout for Input Stream #0.17 : stereo Guessed Channel Layout for Input Stream #0.22 : 5.1 Guessed Channel Layout for Input Stream #0.23 : stereo Guessed Channel Layout for Input Stream #0.25 : stereo Input #0, matroska,webm, from '[CCCP]_Mega_Weird_Audio_Test.mkv': Metadata: title : Macross Plus - First Simulator Test creation_time : 2006-08-07 03:59:51 Duration: 00:01:03.70, start: 0.000000, bitrate: 6167 kb/s Stream #0:0(eng): Video: mpeg4 (Advanced Simple Profile) (XVID / 0x44495658) , yuv420p, 656x464 [SAR 1:1 DAR 41:29], SAR 116:123 DAR 4:3, 23.98 fps, 23.98 tb r, 1k tbn, 23.98 tbc (default) Metadata: title : Macross Plus - First Simulator Test Stream #0:1(eng): Audio: ac3, 48000 Hz, 5.1(side), s16, 448 kb/s (default) Metadata: title : AC3 6ch Audio Stream #0:2(jpn): Audio: ac3, 48000 Hz, stereo, s16, 192 kb/s Metadata: title : AC3 2ch Audio Stream #0:3(eng): Audio: mp3, 48000 Hz, stereo, s16, 192 kb/s Metadata: title : AudX HGHQ 6ch Audio Stream #0:4(eng): Audio: mp3, 48000 Hz, mono, s16, 192 kb/s Metadata: title : AudX SPBQ 6ch Audio Stream #0:5(jpn): Audio: sipr (0[1][0][0] / 0x0130), 16000 Hz, mono, flt, 16 kb/s Metadata: title : ACELP Sipro Mono Audio Stream #0:6(jpn): Audio: adpcm_ms ([2][0][0][0] / 0x0002), 11025 Hz, stereo, s16, 88 kb/s Metadata: title : MS ADPCM 2ch Audio Stream #0:7(jpn): Audio: adpcm_ima_wav ([17][0][0][0] / 0x0011), 11025 Hz, s tereo, s16p, 88 kb/s Metadata: title : IMA ADPCM 2ch Audio Stream #0:8(jpn): Audio: adpcm_yamaha ( [0][0][0] / 0x0020), 16000 Hz, mono, s16, 64 kb/s Metadata: title : Yamaha ADPCM Mono Audio Stream #0:9(jpn): Audio: adpcm_g726 (E[0][0][0] / 0x0045), 8000 Hz, mono, s1 6, 32 kb/s Metadata: title : G.726 ADPCM Mono Audio Stream #0:10(jpn): Audio: pcm_mulaw ([7][0][0][0] / 0x0007), 8000 Hz, stereo , s16, 128 kb/s Metadata: title : ╬╝-Law 2ch Audio Stream #0:11(jpn): Audio: pcm_alaw ([6][0][0][0] / 0x0006), 8000 Hz, stereo, s16, 128 kb/s Metadata: title : A-Law 2ch Audio Stream #0:12(jpn): Audio: gsm_ms (1[0][0][0] / 0x0031), 44100 Hz, mono, s16, 71 kb/s Metadata: title : GSM 6.10 Mono Audio Stream #0:13(jpn): Audio: truespeech ([34][0][0][0] / 0x0022), 8000 Hz, mono , s16, 8 kb/s Metadata: title : TrueSpeech Mono Audio Stream #0:14(jpn): Audio: wmav2 (a[1][0][0] / 0x0161), 44100 Hz, stereo, flt p, 64 kb/s Metadata: title : WMA7 2ch Audio Stream #0:15(jpn): Audio: wmav2 (a[1][0][0] / 0x0161), 44100 Hz, stereo, flt p, 64 kb/s Metadata: title : WMA8 2ch Audio Stream #0:16(jpn): Audio: wmavoice ([10][0][0][0] / 0x000A), 22050 Hz, mono, flt, 20 kb/s Metadata: title : WMA9 Voice Mono Audio Stream #0:17(jpn): Audio: wmav2 (a[1][0][0] / 0x0161), 48000 Hz, stereo, flt p, 64 kb/s Metadata: title : WMA9.2 Std 2ch Audio Stream #0:18(eng): Audio: wmapro (b[1][0][0] / 0x0162), 48000 Hz, 5.1, fltp, 192 kb/s Metadata: title : WMA9.1 Pro 6ch Audio Stream #0:19(jpn): Audio: wmapro (b[1][0][0] / 0x0162), 48000 Hz, stereo, fl tp, 80 kb/s Metadata: title : WMA9.1 Pro 2ch Audio Stream #0:20(eng): Audio: wmapro (b[1][0][0] / 0x0162), 48000 Hz, 5.1, fltp, 192 kb/s Metadata: title : WMA10 Pro 6ch Audio Stream #0:21(jpn): Audio: wmapro (b[1][0][0] / 0x0162), 48000 Hz, stereo, fl tp, 64 kb/s Metadata: title : WMA10 Pro 2ch Audio Stream #0:22(eng): Audio: wmalossless (c[1][0][0] / 0x0163), 48000 Hz, 5.1, s32p, 1882 kb/s Metadata: title : WMA9.1 Lossless 6ch Audio Stream #0:23(jpn): Audio: wmalossless (c[1][0][0] / 0x0163), 48000 Hz, stere o, s32p, 774 kb/s Metadata: title : WMA9.1 Lossless 2ch Audio Stream #0:24(jpn): Audio: cook, 44100 Hz, stereo, fltp Metadata: title : RA6 G2 Cook 2ch Audio Stream #0:25(jpn): Audio: atrac3, 44100 Hz, stereo, fltp Metadata: title : RA8 ATRC 2ch Audio Stream #0:26(eng): Audio: cook, 44100 Hz, 5.1, fltp Metadata: title : RA8 Cook 6ch Audio Stream #0:27(jpn): Audio: cook, 44100 Hz, stereo, fltp Metadata: title : RA8 Cook 2ch Audio Stream #0:28(jpn): Audio: cook, 44100 Hz, mono, fltp Metadata: title : RA8 Cook Mono Audio Stream #0:29(jpn): Audio: aac, 32000 Hz, stereo, s16 Metadata: title : RA10 RAAC 2ch Audio Stream #0:30(jpn): Audio: aac, 44100 Hz, stereo, s16 Metadata: title : RA10 RACP 2ch Audio bit-depth higher than 16 is not implemented. Update your FFmpeg version to the n ewest one from Git. If the problem still occurs, it means that your file has a f eature which has not been implemented. Output #0, wav, to 'out.wav': Metadata: title : Macross Plus - First Simulator Test Stream #0:0(jpn): Audio: pcm_s16le, 48000 Hz, stereo, s16, 1536 kb/s Metadata: title : WMA9.1 Lossless 2ch Audio Stream mapping: Stream #0:23 -> #0:0 (wmalossless -> pcm_s16le) Error while opening decoder for input stream #0:23 }}} -- Ticket URL: <https://ffmpeg.org/trac/ffmpeg/ticket/1847> FFmpeg <http://ffmpeg.org> FFmpeg issue tracker

1 2

#113(avcodec:new): AAC - Audio object type 23 is not supported
by FFmpeg 19 Sep '13

19 Sep '13

#113: AAC - Audio object type 23 is not supported -------------------------+--------------------- Reporter: k_s_johnson | Type: defect Status: new | Priority: normal Component: avcodec | Version: git Keywords: AAC-LD | Blocked By: Blocking: | Reproduced: 0 Analyzed: 0 | -------------------------+--------------------- ffmpeg AAC codec (decoder) doesn't seem to support AAC-LD and libfaad or libfaad2 (which is documented to support AAC-LD) is no longer an audio codec option. So there is no way to decode AAC-LD format audio track anymore. However, vlc on windows seems to play the file ffmpeg build from git snapshot of a few days ago( ffmpeg-HEAD-e16665b) on Fedora 2.6.30.9-96.fc11.x86_6411. command line: ffmpeg -y -i po_arrive...mov -acodec pcm_s24le extracted.wav Error message is: [aac @ 0x1e9bfa0] Audio object type 23 is not supported. -- Ticket URL: <https://ffmpeg.org/trac/ffmpeg/ticket/113> FFmpeg <http://ffmpeg.org> FFmpeg issue tracker

1 11

#1437(FFprobe:new): probe less than the whole file with -show_frames
by FFmpeg 19 Sep '13

19 Sep '13

#1437: probe less than the whole file with -show_frames ---------------------------------------+--------------------------------- Reporter: mdsh | Owner: stefano Type: enhancement | Status: new Priority: normal | Component: FFprobe Version: git-master | Keywords: Blocked By: | Blocking: Reproduced by developer: 0 | Analyzed by developer: 0 ---------------------------------------+--------------------------------- I'd like to probe a file to get interlaced_frame="1" top_field_first="1" - which I believe is only available in -show_frames. My file is 30 minutes log - I only want the data from the first frame. I can't see anything in -h to answer this question. The ffmpeg -vframes, -frames:v and -t are not listed in ffprobe's help, and do not work. I usually use FFprobe with a -probesize, and that is also ignored with -show_frames. Stefano suggested "And of course you can get it with a crude trick, you trim the file *physically* in order to reduce the amount of data to be decoded" but that's a workaround I'd like to avoid. example current file based command line: ffprobe -show_format -show_streams -show_frames -probesize 40000 -print_format xml "tortoise.mxf" ffprobe version N-41487-gee1748a Copyright (c) 2007-2012 the FFmpeg developers built on Jun 10 2012 17:04:40 with llvm_gcc 4.2.1 (Based on Apple Inc. build 5658) (LLVM build 2336.1.00) configuration: --prefix=/Users/mdsh/ffmpeg --arch=x86_64 --enable-ffplay --enable-ffprobe --enable-shared --disable-indev=jack --enable-gpl --enable-nonfree --enable-pthreads --enable-libfaac --enable-libx264 libavutil 51. 56.100 / 51. 56.100 libavcodec 54. 25.100 / 54. 25.100 libavformat 54. 6.101 / 54. 6.101 libavdevice 54. 0.100 / 54. 0.100 libavfilter 2. 78.101 / 2. 78.101 libswscale 2. 1.100 / 2. 1.100 libswresample 0. 15.100 / 0. 15.100 libpostproc 52. 0.100 / 52. 0.100 [mxf @ 0x7fddb081ae00] Stream #0: not enough frames to estimate rate; consider increasing probesize [mxf @ 0x7fddb081ae00] Stream #1: not enough frames to estimate rate; consider increasing probesize Input #0, mxf, from 'tortoise.mxf': Metadata: timecode : 10:53:51:04 Duration: 00:28:21.92, start: 0.000000, bitrate: 42598 kb/s Stream #0:0: Video: mpeg2video (4:2:2), yuv422p, 720x608 [SAR 608:405 DAR 16:9], 30000 kb/s, 25 tbr, 25 tbn, 50 tbc Stream #0:1: Audio: pcm_s16le, 48000 Hz, 4 channels, s16, 3072 kb/s <?xml version="1.0" encoding="UTF-8"?> <ffprobe> <frames> <frame media_type="video" key_frame="1" pkt_pts="0" pkt_pts_time="0.000000" pkt_dts="0" pkt_dts_time="0.000000" pkt_duration="1" pkt_duration_time="0.040000" pkt_pos="7168" width="720" height="608" pix_fmt="yuv422p" sample_aspect_ratio="608:405" pict_type="I" coded_picture_number="0" display_picture_number="0" interlaced_frame="1" top_field_first="1" repeat_pict="0" reference="3"/> <frame media_type="audio" key_frame="1" pkt_pts="0" pkt_pts_time="0.000000" pkt_dts="0" pkt_dts_time="0.000000" pkt_duration="1" pkt_duration_time="0.040000" pkt_pos="157696" sample_fmt="s16" nb_samples="1920"/> ... goes on for a long time - you *really* don't want the uncut output -- Ticket URL: <https://ffmpeg.org/trac/ffmpeg/ticket/1437> FFmpeg <http://ffmpeg.org> FFmpeg issue tracker

1 3

#1964(avformat:new): Request support for decoding / demuxing Adobe HDS dynamic http streaming
by FFmpeg 18 Sep '13

18 Sep '13

#1964: Request support for decoding / demuxing Adobe HDS dynamic http streaming -----------------------------------+--------------------------------------- Reporter: ottomatic | Type: enhancement Status: new | Priority: normal Component: avformat | Version: unspecified Keywords: Adobe HDS | Blocked By: Blocking: | Reproduced by developer: 0 Analyzed by developer: 0 | -----------------------------------+--------------------------------------- Adobe HDS is an adaptive streaming format used primarily to deliver video streams through content delivery networks. It uses a manifest file (F4F) to describe the segments of a file, and then it adaptively delivers segments and sequences in the "optimal" bitrate depending on the client's bandwith and the total server load. Certain major content providers are moving to this format (at least in Sweden) and it would be really great if ffmpeg could support it. A good summary of HDS is found at: http://rdkls.blogspot.se/2011/11/what-i-know-about-http-adaptive.html It seems that most projects that do decode such streams use a PHP script (!) found at: https://github.com/K-S-V/Scripts/blob/master/AdobeHDS.php The Open Source Media Player project has action script code which probably does the same thing: http://sourceforge.net/adobe/osmf/ The format is quite similar to applehttp/hls, so it should be possible to borrow some patterns from the support for that format, which is already in libavformat. I am a C# / java developer and could probably make this happen in C, but it would take a lot of effort. I am not yet familiar with the ffmpeg source code. So I'm hoping that someone might already be working on this? Or that someone well versed on avformat development can take this on. I'd be happy to contribute with my own efforts. Best regards! -- Ticket URL: <https://ffmpeg.org/trac/ffmpeg/ticket/1964> FFmpeg <http://ffmpeg.org> FFmpeg issue tracker

1 19

#681(undetermined:new): -vf mp=pullup is not working
by FFmpeg 17 Sep '13

17 Sep '13

#681: -vf mp=pullup is not working -------------------------------------+------------------------------------- Reporter: dericed | Type: defect Status: new | Priority: normal Component: | Version: undetermined | unspecified Keywords: | Blocked By: Blocking: | Reproduced by developer: 0 Analyzed by developer: 0 | -------------------------------------+------------------------------------- When I call -vf mp=pullup or (pullup,softskip) I get an "Error opening filters!" warning. {{{ ffmpeg -y -i example.mov -vf mp=pullup -r 24000/1001 -c:v v210 -c:a copy example_ivtc.mov ffmpeg version N-33392-gf3bacce, Copyright (c) 2000-2011 the FFmpeg developers built on Oct 8 2011 18:33:19 with gcc 4.2.1 (Apple Inc. build 5666) (dot 3) configuration: --enable-gpl libavutil 51. 20. 0 / 51. 20. 0 libavcodec 53. 19. 1 / 53. 19. 1 libavformat 53. 14. 0 / 53. 14. 0 libavdevice 53. 4. 0 / 53. 4. 0 libavfilter 2. 43. 6 / 2. 43. 6 libswscale 2. 1. 0 / 2. 1. 0 libpostproc 51. 2. 0 / 51. 2. 0 [mov,mp4,m4a,3gp,3g2,mj2 @ 0x101005800] Unimplemented container channel layout. [mov,mp4,m4a,3gp,3g2,mj2 @ 0x101005800] If you want to help, upload a sample of this file to ftp://upload.ffmpeg.org/MPlayer/incoming/ and contact the ffmpeg-devel mailing list. Seems stream 0 codec frame rate differs from container frame rate: 30000.00 (30000/1) -> 29.97 (30000/1001) Input #0, mov,mp4,m4a,3gp,3g2,mj2, from 'example.mov': Metadata: major_brand : qt minor_version : 537199360 compatible_brands: qt creation_time : 2011-11-05 17:32:17 Duration: 00:19:52.02, start: -39.572900, bitrate: 1122 kb/s Stream #0:0(eng): Video: v210 (v210 / 0x30313276), yuv422p10le, 720x486, 223725 kb/s, SAR 9:10 DAR 4:3, 29.97 fps, 29.97 tbr, 30k tbn, 30k tbc Metadata: creation_time : 2011-11-05 17:32:17 Stream #0:1(eng): Audio: pcm_s16le (sowt / 0x74776F73), 48000 Hz, 2 channels, s16, 1536 kb/s Metadata: creation_time : 2011-11-05 17:32:17 Stream #0:2(eng): Data: none (tmcd / 0x64636D74) Metadata: creation_time : 2011-11-05 17:32:17 [buffer @ 0x100e01900] w:720 h:486 pixfmt:yuv422p10le tb:1/1000000 sar:9/10 sws_param: [mp @ 0x100e040c0] This is a unholy filter, it will be purified by the ffmpeg exorcist team which will change its syntax from dark -vf mp to light -vf. Thou shalst not make spells or scripts that depend on it [buffersink @ 0x100e03d80] auto-inserting filter 'auto-inserted scale 0' between the filter 'Parsed_mp_0' and the filter 'out' [mp @ 0x100e040c0] auto-inserting filter 'auto-inserted scale 1' between the filter 'src' and the filter 'Parsed_mp_0' [scale @ 0x100e04a80] w:720 h:486 fmt:yuv422p10le -> w:720 h:486 fmt:yuv420p flags:0x4 Error opening filters! }}} -- Ticket URL: <https://ffmpeg.org/trac/ffmpeg/ticket/681> FFmpeg <http://ffmpeg.org> FFmpeg issue tracker

1 8

#894(undetermined:new): ljpeg: fix losslesss prediction 0 for 24bpp (and 48bpp)
by FFmpeg 15 Sep '13

15 Sep '13

#894: ljpeg: fix losslesss prediction 0 for 24bpp (and 48bpp) -------------------------------------+------------------------------------- Reporter: ami_stuff | Type: defect Status: new | Priority: normal Component: | Version: undetermined | unspecified Keywords: | Blocked By: Blocking: | Reproduced by developer: 0 Analyzed by developer: 0 | -------------------------------------+------------------------------------- {{{ $ ffmpeg -i 24_pred0.jpg out2.bmp ffmpeg version 0.9.0.git-12d8340 Copyright (c) 2000-2012 the FFmpeg developers built on Jan 7 2012 02:04:56 with gcc 4.5.2 configuration: --disable-ffplay --disable-ffserver --disable-ffprobe --disable -asm --disable-yasm --disable-shared --enable-static libavutil 51. 34.100 / 51. 34.100 libavcodec 53. 54.100 / 53. 54.100 libavformat 53. 29.100 / 53. 29.100 libavdevice 53. 4.100 / 53. 4.100 libavfilter 2. 57.101 / 2. 57.101 libswscale 2. 1.100 / 2. 1.100 libswresample 0. 5.100 / 0. 5.100 Input #0, image2, from '24_pred0.jpg': Duration: 00:00:00.04, start: 0.000000, bitrate: N/A Stream #0:0: Video: mjpeg, bgr24, 640x480, 25 tbr, 25 tbn, 25 tbc [buffer @ 016c1940] w:640 h:480 pixfmt:bgr24 tb:1/1000000 sar:0/1 sws_param: Output #0, image2, to 'out2.bmp': Metadata: encoder : Lavf53.29.100 Stream #0:0: Video: bmp, bgr24, 640x480, q=2-31, 200 kb/s, 90k tbn, 25 tbc Stream mapping: Stream #0:0 -> #0:0 (mjpeg -> bmp) Press [q] to stop, [?] for help frame= 1 fps= 0 q=0.0 Lsize= 0kB time=00:00:00.04 bitrate= 0.0kbits/ s video:900kB audio:0kB global headers:0kB muxing overhead -100.000000% }}} -- Ticket URL: <https://ffmpeg.org/trac/ffmpeg/ticket/894> FFmpeg <http://ffmpeg.org> FFmpeg issue tracker

1 5

#1857(avcodec:new): PNG textual information chunks
by FFmpeg 11 Sep '13

11 Sep '13

#1857: PNG textual information chunks ---------------------------------------+--------------------------------- Reporter: richardpl | Owner: Type: enhancement | Status: new Priority: wish | Component: avcodec Version: git-master | Keywords: Blocked By: | Blocking: Reproduced by developer: 0 | Analyzed by developer: 0 ---------------------------------------+--------------------------------- Specifically chunks '''tEXt''', '''zTXt''', '''iTXt'''. See [http://www.libpng.org/pub/png/spec/1.2/PNG-Chunks.html#C.Anc-text] -- Ticket URL: <https://ffmpeg.org/trac/ffmpeg/ticket/1857> FFmpeg <http://ffmpeg.org> FFmpeg issue tracker

1 7

#232(undetermined:new): bogus error message with amr files: [amrnb @ 0x626e90] dtx mode not implemented.
by FFmpeg 11 Sep '13

11 Sep '13

#232: bogus error message with amr files: [amrnb @ 0x626e90] dtx mode not implemented. ------------------------------+-------------------------- Reporter: matteosistisette | Type: defect Status: new | Priority: critical Component: undetermined | Version: unspecified Keywords: | Blocked By: Blocking: | Reproduced: 0 Analyzed: 0 | ------------------------------+-------------------------- I've just compiled the latest version of ffmpeg from the SVN on a CentOS machine and when I try to decode amr audio files I get this error (repeated a lot of times): {{{ [amrnb @ 0x626e90] dtx mode not implemented. Update your FFmpeg version to the newest one from SVN. If the problem still occurs, it means that your file has a feature which has not been implemented.If you want to help, upload a sample of this file to ftp://upload.ffmpeg.org/MPlayer/incoming/ and contact the ffmpeg-devel mailing list. }}} On another box, an Ubuntu one, I have installed the ffmpeg package from the repositories and it works fine with the same files. Also, on yet another CentOS box I am using a several-year-old version of ffmpeg that was compiled ages ago which can decode the same amr files just fine. So either the error message is completely wrong and the real problem with the files is different, or there has been some regression in that a feature that had already been implemented ages ago has been dropped. -- Ticket URL: <https://ffmpeg.org/trac/ffmpeg/ticket/232> FFmpeg <http://ffmpeg.org> FFmpeg issue tracker

1 7

#225(undetermined:new): Converting from YUVJ to YUV lose contrast
by FFmpeg 07 Sep '13

07 Sep '13

#225: Converting from YUVJ to YUV lose contrast -------------------------------+------------------------- Reporter: sghpunk | Type: defect Status: new | Priority: important Component: undetermined | Version: git-master Keywords: YUV/YUVJ contrast | Blocked By: Blocking: | Reproduced: 1 Analyzed: 0 | -------------------------------+------------------------- I am trying to transcode video from my Nicon D90 mjpeg to x264. And output video contrast is lower than input. I use ffmpeg-HEAD-27614b1 Command line: ffmpeg.exe -threads 2 -an -i input.mkv -f matroska -vcodec libx264 -profile main -preset fast -cqp 27 -y x264-low_contract_yuv.mkv > enc.log 2>&1 {{{ ffmpeg version UNKNOWN, Copyright (c) 2000-2011 the FFmpeg developers built on May 19 2011 17:41:01 with gcc 4.5.2 configuration: --prefix=/mingw --disable-static --enable-shared --enable-gpl --enable-version3 --disable-doc --enable-postproc --disable- network --enable-memalign-hack --enable-libopencore-amrnb --enable- libopencore-amrwb --enable-libmp3lame --enable-libspeex --enable-libvorbis --enable-libx264 --enable-pthreads --enable-frei0r --extra- cflags='-mthreads -mtune=nocona -march=nocona -msse3 -m80387 -mfpmath=387 -O2 -fgnu89-inline -Wno-error=missing-prototypes' --extra-ldflags='-Wl ,--enable-auto-image-base -Wl,--enable-auto-import' --extra-libs=-ldl --cpu=nocona libavutil 51. 2. 1 / 51. 2. 1 libavcodec 53. 5. 0 / 53. 5. 0 libavformat 53. 0. 3 / 53. 0. 3 libavdevice 53. 0. 0 / 53. 0. 0 libavfilter 2. 5. 0 / 2. 5. 0 libswscale 0. 14. 0 / 0. 14. 0 libpostproc 51. 2. 0 / 51. 2. 0 [matroska,webm @ 00b70280] Estimating duration from bitrate, this may be inaccurate Input #0, matroska,webm, from 'input.mkv': Metadata: MAKER : NIKON CORPORATION MODEL : NIKON D90 CREATION_TIME : 2011-05-05 07:47:28 ENCODER : Lavf53.0.3 Duration: 00:00:05.04, start: 0.000000, bitrate: N/A Stream #0.0: Video: mjpeg, yuvj422p, 1280x720, PAR 1:1 DAR 16:9, 24 fps, 24 tbr, 1k tbn, 24 tbc (default) Incompatible pixel format 'yuvj422p' for codec 'libx264', auto-selecting format 'yuv420p' [buffer @ 00b83e00] w:1280 h:720 pixfmt:yuvj422p tb:1/1000000 sar:1/1 [ffsink @ 003efee0] auto-inserting filter 'auto-inserted scaler 0' between the filter 'src' and the filter 'out' [scale @ 00b95920] w:1280 h:720 fmt:yuvj422p -> w:1280 h:720 fmt:yuv420p flags:0xa0000004 [libx264 @ 00b60540] using SAR=1/1 [libx264 @ 00b60540] using cpu capabilities: MMX2 SSE2 SSE3 Cache64 [libx264 @ 00b60540] profile Main, level 3.1 [libx264 @ 00b60540] 264 - core 114 - H.264/MPEG-4 AVC codec - Copyleft 2003-2011 - http://www.videolan.org/x264.html - options: cabac=1 ref=2 deblock=1:0:0 analyse=0x1:0x111 me=hex subme=6 psy=1 psy_rd=1.00:0.00 mixed_ref=1 me_range=16 chroma_me=1 trellis=1 8x8dct=0 cqm=0 deadzone=21,11 fast_pskip=1 chroma_qp_offset=-2 threads=2 sliced_threads=0 nr=0 decimate=1 interlaced=0 constrained_intra=0 bframes=3 b_pyramid=2 b_adapt=1 b_bias=0 direct=1 weightb=1 open_gop=0 weightp=1 keyint=250 keyint_min=24 scenecut=40 intra_refresh=0 rc=cqp mbtree=0 qp=27 ip_ratio=1.40 pb_ratio=1.30 aq=0 Output #0, matroska, to 'x264-low_contract_yuv.mkv': Metadata: MAKER : NIKON CORPORATION MODEL : NIKON D90 CREATION_TIME : 2011-05-05 07:47:28 encoder : Lavf53.0.3 Stream #0.0: Video: libx264, yuv420p, 1280x720 [PAR 1:1 DAR 16:9], q=2-31, 200 kb/s, 1k tbn, 24 tbc (default) Stream mapping: Stream #0.0 -> #0.0 Press [q] to stop, [?] for help frame= 10 fps= 0 q=27.0 size= 33kB time=10000000000.00 bitrate= 0.0kbits/s ...CUT... frame= 121 fps= 5 q=-1.0 Lsize= 864kB time=4.96 bitrate=1427.9kbits/s video:863kB audio:0kB global headers:0kB muxing overhead 0.173612% frame I:1 Avg QP:24.00 size: 33897 [libx264 @ 00b60540] frame P:41 Avg QP:27.00 size: 10846 [libx264 @ 00b60540] frame B:79 Avg QP:28.66 size: 5118 [libx264 @ 00b60540] consecutive B-frames: 6.6% 11.6% 22.3% 59.5% [libx264 @ 00b60540] mb I I16..4: 44.1% 0.0% 55.9% [libx264 @ 00b60540] mb P I16..4: 7.9% 0.0% 4.9% P16..4: 42.7% 10.5% 3.3% 0.0% 0.0% skip:30.7% [libx264 @ 00b60540] mb B I16..4: 3.9% 0.0% 0.6% B16..8: 30.6% 7.4% 0.3% direct: 8.4% skip:48.7% L0:41.1% L1:53.7% BI: 5.2% [libx264 @ 00b60540] coded y,uvDC,uvAC intra: 29.7% 47.0% 14.1% inter: 8.7% 11.9% 0.1% [libx264 @ 00b60540] i16 v,h,dc,p: 31% 31% 24% 14% [libx264 @ 00b60540] i4 v,h,dc,ddl,ddr,vr,hd,vl,hu: 26% 20% 20% 5% 7% 7% 6% 6% 3% [libx264 @ 00b60540] i8c dc,h,v,p: 63% 18% 16% 3% [libx264 @ 00b60540] Weighted P-Frames: Y:2.4% UV:2.4% [libx264 @ 00b60540] ref P L0: 75.4% 24.6% [libx264 @ 00b60540] ref B L0: 80.3% 19.7% [libx264 @ 00b60540] ref B L1: 94.1% 5.9% [libx264 @ 00b60540] kb/s:1401.04 }}} ffmpeg -v 9 -loglevel 99 -i input.mkv > v9.log 2>&1 {{{ ffmpeg version UNKNOWN, Copyright (c) 2000-2011 the FFmpeg developers built on May 19 2011 17:41:01 with gcc 4.5.2 configuration: --prefix=/mingw --disable-static --enable-shared --enable-gpl --enable-version3 --disable-doc --enable-postproc --disable- network --enable-memalign-hack --enable-libopencore-amrnb --enable- libopencore-amrwb --enable-libmp3lame --enable-libspeex --enable-libvorbis --enable-libx264 --enable-pthreads --enable-frei0r --extra- cflags='-mthreads -mtune=nocona -march=nocona -msse3 -m80387 -mfpmath=387 -O2 -fgnu89-inline -Wno-error=missing-prototypes' --extra-ldflags='-Wl ,--enable-auto-image-base -Wl,--enable-auto-import' --extra-libs=-ldl --cpu=nocona libavutil 51. 2. 1 / 51. 2. 1 libavcodec 53. 5. 0 / 53. 5. 0 libavformat 53. 0. 3 / 53. 0. 3 libavdevice 53. 0. 0 / 53. 0. 0 libavfilter 2. 5. 0 / 2. 5. 0 libswscale 0. 14. 0 / 0. 14. 0 libpostproc 51. 2. 0 / 51. 2. 0 [NULL @ 00b70280] Format matroska,webm probed with size=2048 and score=100 st:0 removing common factor 1000000 from timebase [mjpeg @ 00b7b700] buffer too small, expanding to 73330 bytes [mjpeg @ 00b7b700] marker=d8 avail_size_in_buf=73330 [mjpeg @ 00b7b700] marker parser used 0 bytes (0 bits) [mjpeg @ 00b7b700] marker=db avail_size_in_buf=73328 [mjpeg @ 00b7b700] index=0 [mjpeg @ 00b7b700] qscale[0]: 3 [mjpeg @ 00b7b700] index=1 [mjpeg @ 00b7b700] qscale[1]: 6 [mjpeg @ 00b7b700] marker parser used 132 bytes (1056 bits) [mjpeg @ 00b7b700] marker=c0 avail_size_in_buf=73194 [mjpeg @ 00b7b700] sof0: picture: 1280x720 [mjpeg @ 00b7b700] component 0 2:1 id: 0 quant:0 [mjpeg @ 00b7b700] component 1 1:1 id: 1 quant:1 [mjpeg @ 00b7b700] component 2 1:1 id: 2 quant:1 [mjpeg @ 00b7b700] pix fmt id 21111100 [mjpeg @ 00b7b700] marker parser used 17 bytes (136 bits) [mjpeg @ 00b7b700] marker=c4 avail_size_in_buf=73175 [mjpeg @ 00b7b700] class=0 index=0 nb_codes=12 [mjpeg @ 00b7b700] class=1 index=0 nb_codes=251 [mjpeg @ 00b7b700] class=0 index=1 nb_codes=12 [mjpeg @ 00b7b700] class=1 index=1 nb_codes=251 [mjpeg @ 00b7b700] marker parser used 418 bytes (3344 bits) [mjpeg @ 00b7b700] escaping removed 115 bytes [mjpeg @ 00b7b700] marker=da avail_size_in_buf=72755 [mjpeg @ 00b7b700] component: 0 [mjpeg @ 00b7b700] component: 1 [mjpeg @ 00b7b700] component: 2 [mjpeg @ 00b7b700] marker parser used 72639 bytes (581110 bits) [mjpeg @ 00b7b700] marker=d9 avail_size_in_buf=3 [mjpeg @ 00b7b700] mjpeg decode frame unused 3 bytes [matroska,webm @ 00b70280] All info found [matroska,webm @ 00b70280] Estimating duration from bitrate, this may be inaccurate Input #0, matroska,webm, from 'input.mkv': Metadata: MAKER : NIKON CORPORATION MODEL : NIKON D90 CREATION_TIME : 2011-05-05 07:47:28 ENCODER : Lavf53.0.3 Duration: 00:00:05.04, start: 0.000000, bitrate: N/A Stream #0.0, 1, 1/1000: Video: mjpeg, yuvj422p, 1280x720, 1/24, PAR 1:1 DAR 16:9, 24 fps, 24 tbr, 1k tbn, 24 tbc (default) At least one output file must be specified }}} Seems like contrast loosing when converting a pixel format from yuvj422p to yuv420p. I tryed to encode same video from mplayer yuv4mpeg raw file and in this case contrast on output video is the same. I cannot find mplayer ftp server to upload samples. Where can I upload it? -- Ticket URL: <https://ffmpeg.org/trac/ffmpeg/ticket/225> FFmpeg <http://ffmpeg.org> FFmpeg issue tracker

1 23

#1774(avformat:new): rtpproto: allow "?reuse" option in URI
by FFmpeg 04 Sep '13

04 Sep '13

#1774: rtpproto: allow "?reuse" option in URI -------------------------------------+------------------------------------- Reporter: tmatth | Type: Status: new | enhancement Component: avformat | Priority: normal Keywords: rtp udp | Version: git- reuse | master Blocking: | Blocked By: Analyzed by developer: 0 | Reproduced by developer: 0 -------------------------------------+------------------------------------- It would useful to allow users to explicitly specify a reuse=1 option when creating an RTP stream. The attached patch adds this option, which will be used by the UDP protocol when opening a socket. -- Ticket URL: <https://ffmpeg.org/trac/ffmpeg/ticket/1774> FFmpeg <http://ffmpeg.org> FFmpeg issue tracker

1 2

#839(undetermined:new): crash with png (gray) to snow (gray) conversion
by FFmpeg 29 Aug '13

29 Aug '13

#839: crash with png (gray) to snow (gray) conversion -------------------------------------+------------------------------------- Reporter: ami_stuff | Type: defect Status: new | Priority: normal Component: | Version: undetermined | unspecified Keywords: | Blocked By: Blocking: | Reproduced by developer: 0 Analyzed by developer: 0 | -------------------------------------+------------------------------------- https://ffmpeg.org/trac/ffmpeg/attachment/ticket/833/gray.png {{{ (gdb) r -i gray.png -vcodec snow -strict -2 out.avi Starting program: F:\MinGW\msys\1.0\ffmpeg-HEAD-834f80d/ffmpeg_g.exe -i gray.png -vcodec snow -strict -2 out.avi [New Thread 3404.0xf18] ffmpeg version 0.9.0.git-834f80d, Copyright (c) 2000-2011 the FFmpeg developers built on Dec 22 2011 14:07:40 with gcc 4.5.2 configuration: --disable-ffplay --disable-ffserver --disable-asm --disable-yas m --disable-shared --enable-static libavutil 51. 32.100 / 51. 32.100 libavcodec 53. 47.100 / 53. 47.100 libavformat 53. 28.100 / 53. 28.100 libavdevice 53. 4.100 / 53. 4.100 libavfilter 2. 53. 0 / 2. 53. 0 libswscale 2. 1.100 / 2. 1.100 libswresample 0. 5.100 / 0. 0.100 Input #0, image2, from 'gray.png': Duration: 00:00:00.04, start: 0.000000, bitrate: N/A Stream #0:0: Video: png, gray, 1024x768, 25 tbr, 25 tbn, 25 tbc [buffer @ 03d61640] w:1024 h:768 pixfmt:gray tb:1/1000000 sar:0/1 sws_param: Output #0, avi, to 'out.avi': Metadata: ISFT : Lavf53.28.100 Stream #0:0: Video: snow (SNOW / 0x574F4E53), gray, 1024x768, q=2-31, 200 kb /s, 25 tbn, 25 tbc Stream mapping: Stream #0:0 -> #0:0 (png -> snow) Press [q] to stop, [?] for help Program received signal SIGSEGV, Segmentation fault. 0x0080e15f in encode_frame (avctx=0x3d5f8b8, buf=0x4a10020 "", buf_size=5515024, data=0x22daf0) at libavcodec/snowenc.c:1619 1619 memcpy(&s->input_picture.data[i][y * s->input_picture.linesi ze[i]], (gdb) bt #0 0x0080e15f in encode_frame (avctx=0x3d5f8b8, buf=0x4a10020 "", buf_size=5515024, data=0x22daf0) at libavcodec/snowenc.c:1619 #1 0x00509101 in avcodec_encode_video (avctx=0x3d5f8b8, buf=0x4a10020 "", buf_size=5515024, pict=0x22daf0) at libavcodec/utils.c:881 #2 0x00404f6e in do_video_out (s=0x3d5f3b0, ost=0x3d5fcd0, in_picture=0x3d62220, frame_size=0x22de9c, quality=0, ist=<value optimized out>) at ffmpeg.c:1349 #3 0x004068c5 in transcode_video (ist=0x3d611d0, ost_table=0x3d5fcd0, nb_ostreams=1, pkt=0x22fbb8) at ffmpeg.c:1955 #4 output_packet (ist=0x3d611d0, ost_table=0x3d5fcd0, nb_ostreams=1, pkt=0x22fbb8) at ffmpeg.c:2046 #5 0x0040a63e in transcode (output_files=<value optimized out>, nb_output_files=0, input_files=0x0, nb_input_files=4256952) at ffmpeg.c:2804 #6 0x0022ff48 in ?? () #7 0x00000000 in ?? () (gdb) disass $pc-32,$pc+32 Dump of assembler code from 0x80e13f to 0x80e17f: 0x0080e13f <encode_frame+187>: add %al,(%eax) 0x0080e141 <encode_frame+189>: add 0x1040(%esi,%eax,4),%edx 0x0080e148 <encode_frame+196>: mov %ebx,%esi 0x0080e14a <encode_frame+198>: mov 0xa0(%esp),%edi 0x0080e151 <encode_frame+205>: imul 0x10(%edi,%eax,4),%esi 0x0080e156 <encode_frame+210>: add (%edi,%eax,4),%esi 0x0080e159 <encode_frame+213>: mov %edx,%edi 0x0080e15b <encode_frame+215>: mov 0x50(%esp),%ecx => 0x0080e15f <encode_frame+219>: rep movsb %ds:(%esi),%es:(%edi) 0x0080e161 <encode_frame+221>: inc %ebx 0x0080e162 <encode_frame+222>: cmp 0x54(%esp),%ebx 0x0080e166 <encode_frame+226>: jl 0x80e133 <encode_frame+175> 0x0080e168 <encode_frame+228>: inc %eax 0x0080e169 <encode_frame+229>: cmp $0x3,%eax 0x0080e16c <encode_frame+232>: jne 0x80e116 <encode_frame+146> 0x0080e16e <encode_frame+234>: mov 0x6c(%esp),%edi 0x0080e172 <encode_frame+238>: add $0xf20,%edi 0x0080e178 <encode_frame+244>: mov $0x48,%ecx 0x0080e17d <encode_frame+249>: mov 0xa0(%esp),%esi End of assembler dump. (gdb) info all-registers eax 0x1 1 ecx 0x200 512 edx 0x0 0 ebx 0x0 0 esp 0x22c860 0x22c860 ebp 0x400 0x400 esi 0x0 0 edi 0x0 0 eip 0x80e15f 0x80e15f <encode_frame+219> eflags 0x10246 [ PF ZF IF RF ] cs 0x1b 27 ss 0x23 35 ds 0x23 35 es 0x23 35 fs 0x3b 59 gs 0x0 0 st0 0 (raw 0x00000000000000000000) st1 0 (raw 0x00000000000000000000) st2 0 (raw 0x00000000000000000000) st3 -2147483648 (raw 0xc01e8000000000000000) st4 -1.1000000000000001 (raw 0xbfff8ccccccccccccccd) st5 0 (raw 0x00000000000000000000) st6 0.59999999999999998 (raw 0x3ffe999999999999999a) st7 0 (raw 0x00000000000000000000) fctrl 0xffff037f -64641 fstat 0xffff0120 -65248 ftag 0xffffffff -1 fiseg 0x0 0 fioff 0x0 0 foseg 0xffff0000 -65536 fooff 0x0 0 fop 0x0 0 xmm0 {v4_float = {0x0, 0x0, 0x0, 0x0}, v2_double = {0x0, 0x0}, v16_int8 = {0x0 <repeats 16 times>}, v8_int16 = {0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0}, v4_int32 = {0x0, 0x0, 0x0, 0x0}, v2_int64 = {0x0, 0x0}, uint128 = 0x00000000000000000000000000000000} xmm1 {v4_float = {0x0, 0x0, 0x0, 0x0}, v2_double = {0x0, 0x0}, v16_int8 = {0x0 <repeats 16 times>}, v8_int16 = {0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0}, v4_int32 = {0x0, 0x0, 0x0, 0x0}, v2_int64 = {0x0, 0x0}, uint128 = 0x00000000000000000000000000000000} xmm2 {v4_float = {0x0, 0x0, 0x0, 0x0}, v2_double = {0x0, 0x0}, v16_int8 = {0x0 <repeats 16 times>}, v8_int16 = {0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0}, v4_int32 = {0x0, 0x0, 0x0, 0x0}, v2_int64 = {0x0, 0x0}, uint128 = 0x00000000000000000000000000000000} xmm3 {v4_float = {0x0, 0x0, 0x0, 0x0}, v2_double = {0x0, 0x0}, v16_int8 = {0x0 <repeats 16 times>}, v8_int16 = {0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0}, v4_int32 = {0x0, 0x0, 0x0, 0x0}, v2_int64 = {0x0, 0x0}, uint128 = 0x00000000000000000000000000000000} xmm4 {v4_float = {0x0, 0x0, 0x0, 0x0}, v2_double = {0x0, 0x0}, v16_int8 = {0x0 <repeats 16 times>}, v8_int16 = {0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0}, v4_int32 = {0x0, 0x0, 0x0, 0x0}, v2_int64 = {0x0, 0x0}, uint128 = 0x00000000000000000000000000000000} xmm5 {v4_float = {0x0, 0x0, 0x0, 0x0}, v2_double = {0x0, 0x0}, v16_int8 = {0x0 <repeats 16 times>}, v8_int16 = {0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0}, v4_int32 = {0x0, 0x0, 0x0, 0x0}, v2_int64 = {0x0, 0x0}, uint128 = 0x00000000000000000000000000000000} xmm6 {v4_float = {0x0, 0x0, 0x0, 0x0}, v2_double = {0x0, 0x0}, v16_int8 = {0x0 <repeats 16 times>}, v8_int16 = {0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0}, v4_int32 = {0x0, 0x0, 0x0, 0x0}, v2_int64 = {0x0, 0x0}, uint128 = 0x00000000000000000000000000000000} xmm7 {v4_float = {0x0, 0x0, 0x0, 0x0}, v2_double = {0x0, 0x0}, v16_int8 = {0x0 <repeats 16 times>}, v8_int16 = {0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0}, v4_int32 = {0x0, 0x0, 0x0, 0x0}, v2_int64 = {0x0, 0x0}, uint128 = 0x00000000000000000000000000000000} mxcsr 0x1f80 [ IM DM ZM OM UM PM ] mm0 {uint64 = 0x0, v2_int32 = {0x0, 0x0}, v4_int16 = {0x0, 0x0, 0x0, 0x0}, v8_int8 = {0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0}} mm1 {uint64 = 0x0, v2_int32 = {0x0, 0x0}, v4_int16 = {0x0, 0x0, 0x0, 0x0}, v8_int8 = {0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0}} mm2 {uint64 = 0x0, v2_int32 = {0x0, 0x0}, v4_int16 = {0x0, 0x0, 0x0, 0x0}, v8_int8 = {0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0}} mm3 {uint64 = 0x8000000000000000, v2_int32 = {0x0, 0x80000000}, v4_int16 = {0x0, 0x0, 0x0, 0x8000}, v8_int8 = {0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x80}} mm4 {uint64 = 0x8ccccccccccccccd, v2_int32 = {0xcccccccd, 0x8ccccccc}, v4_int16 = {0xcccd, 0xcccc, 0xcccc, 0x8ccc}, v8_int8 = { 0xcd, 0xcc, 0xcc, 0xcc, 0xcc, 0xcc, 0xcc, 0x8c}} mm5 {uint64 = 0x0, v2_int32 = {0x0, 0x0}, v4_int16 = {0x0, 0x0, 0x0, 0x0}, v8_int8 = {0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0}} mm6 {uint64 = 0x999999999999999a, v2_int32 = {0x9999999a, 0x99999999}, v4_int16 = {0x999a, 0x9999, 0x9999, 0x9999}, v8_int8 = { 0x9a, 0x99, 0x99, 0x99, 0x99, 0x99, 0x99, 0x99}} mm7 {uint64 = 0x0, v2_int32 = {0x0, 0x0}, v4_int16 = {0x0, 0x0, 0x0, 0x0}, v8_int8 = {0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0}} }}} -- Ticket URL: <https://ffmpeg.org/trac/ffmpeg/ticket/839> FFmpeg <http://ffmpeg.org> FFmpeg issue tracker

1 6

#1845(FFmpeg:new): Encoded movies with mov_text subtitles do not play with QT Player
by FFmpeg 29 Aug '13

29 Aug '13

#1845: Encoded movies with mov_text subtitles do not play with QT Player ----------------------------------+-------------------------------------- Reporter: Atarikid | Type: defect Status: new | Priority: normal Component: FFmpeg | Version: git-master Keywords: | Blocked By: Blocking: | Reproduced by developer: 0 Analyzed by developer: 0 | ----------------------------------+-------------------------------------- When a .mkv contains subrip subtitle(s) and you encode to mp4 with -c:s mov_text the subtitles do not work when using the QuickTime Player (OSX). It plays fine with VLC though. When encoding with Handbrake (which uses mov_text for mp4) it works fine with QuickTime Player. FFmpeg commandline: /Users/atarikid/Desktop/ffmpeg -i /Volumes/Data/Movies/Homeland?.mkv -c:a aac -c:v libx264 -strict -2 -c:s mov_text /Users/atarikid/Desktop/test.mp4 -- Ticket URL: <https://ffmpeg.org/trac/ffmpeg/ticket/1845> FFmpeg <http://ffmpeg.org> FFmpeg issue tracker

1 30

#1346(avcodec:new): q:a for -acodec aac
by FFmpeg 26 Aug '13

26 Aug '13

#1346: q:a for -acodec aac --------------------------------------+--------------------------------- Reporter: cehoyos | Owner: Type: defect | Status: new Priority: normal | Component: avcodec Version: git-master | Keywords: aac Blocked By: | Blocking: Reproduced by developer: 0 | Analyzed by developer: 0 --------------------------------------+--------------------------------- The native aac encoder source code contains hints that global_quality is respected, but setting -aq makes only a minimal output file size difference. This used to work before release 0.6. {{{ $ ffmpeg -i fate-suite/lossless-audio/luckynight-partial.tta -strict experimental -q:a 0.001 -t 8 out.aac ffmpeg version N-40960-ge15f128 Copyright (c) 2000-2012 the FFmpeg developers built on May 23 2012 13:44:40 with gcc 4.3.2 configuration: --cc=/usr/local/gcc-4.3.2/bin/gcc --enable-gpl --enable- libopenjpeg --enable-libvorbis --enable-libspeex --enable-libmp3lame --enable-libtheora --extra-ldflags=-lm libavutil 51. 53.100 / 51. 53.100 libavcodec 54. 23.100 / 54. 23.100 libavformat 54. 6.100 / 54. 6.100 libavdevice 53. 4.100 / 53. 4.100 libavfilter 2. 76.100 / 2. 76.100 libswscale 2. 1.100 / 2. 1.100 libswresample 0. 15.100 / 0. 15.100 libpostproc 52. 0.100 / 52. 0.100 Input #0, tta, from 'fate-suite/lossless-audio/luckynight-partial.tta': Duration: 00:01:00.48, start: 0.000000, bitrate: 138 kb/s Stream #0:0: Audio: tta, 44100 Hz, stereo, s16 [aformat @ 0x8f14200] auto-inserting filter 'auto-inserted resampler 0' between the filter 'src' and the filter 'aformat' [aresample @ 0x8f0b920] r:44100Hz -> r:44100Hz Output #0, adts, to 'out.aac': Metadata: encoder : Lavf54.6.100 Stream #0:0: Audio: aac, 44100 Hz, stereo, flt, 128 kb/s Stream mapping: Stream #0:0 -> #0:0 (tta -> aac) Press [q] to stop, [?] for help size= 137kB time=00:00:08.35 bitrate= 134.6kbits/s video:0kB audio:135kB global headers:0kB muxing overhead 1.826173% }}} {{{ $ ffmpeg -i fate-suite/lossless-audio/luckynight-partial.tta -strict experimental -q:a 100000 -t 8 out.aac ffmpeg version N-40960-ge15f128 Copyright (c) 2000-2012 the FFmpeg developers built on May 23 2012 13:44:40 with gcc 4.3.2 configuration: --cc=/usr/local/gcc-4.3.2/bin/gcc --enable-gpl --enable- libopenjpeg --enable-libvorbis --enable-libspeex --enable-libmp3lame --enable-libtheora --extra-ldflags=-lm libavutil 51. 53.100 / 51. 53.100 libavcodec 54. 23.100 / 54. 23.100 libavformat 54. 6.100 / 54. 6.100 libavdevice 53. 4.100 / 53. 4.100 libavfilter 2. 76.100 / 2. 76.100 libswscale 2. 1.100 / 2. 1.100 libswresample 0. 15.100 / 0. 15.100 libpostproc 52. 0.100 / 52. 0.100 Input #0, tta, from 'fate-suite/lossless-audio/luckynight-partial.tta': Duration: 00:01:00.48, start: 0.000000, bitrate: 138 kb/s Stream #0:0: Audio: tta, 44100 Hz, stereo, s16 [aformat @ 0x8f14200] auto-inserting filter 'auto-inserted resampler 0' between the filter 'src' and the filter 'aformat' [aresample @ 0x8f0b920] r:44100Hz -> r:44100Hz Output #0, adts, to 'out.aac': Metadata: encoder : Lavf54.6.100 Stream #0:0: Audio: aac, 44100 Hz, stereo, flt, 128 kb/s Stream mapping: Stream #0:0 -> #0:0 (tta -> aac) Press [q] to stop, [?] for help size= 144kB time=00:00:08.35 bitrate= 140.9kbits/s video:0kB audio:141kB global headers:0kB muxing overhead 1.742700% }}} -- Ticket URL: <https://ffmpeg.org/trac/ffmpeg/ticket/1346> FFmpeg <http://ffmpeg.org> FFmpeg issue tracker

1 3

#1900(undetermined:new): h264: huge memory allocation
by FFmpeg 25 Aug '13

25 Aug '13

#1900: h264: huge memory allocation -------------------------------------+------------------------------------- Reporter: ami_stuff | Owner: Type: defect | Status: new Priority: normal | Component: Version: | undetermined unspecified | Keywords: Blocked By: | Blocking: Reproduced by developer: 0 | Analyzed by developer: 0 -------------------------------------+------------------------------------- http://www.datafilehost.com/download-d3ea3b83.html {{{ C:\>ffmpeg -i h264.avi ffmpeg version N-46283-g1475815 Copyright (c) 2000-2012 the FFmpeg developers built on Nov 2 2012 02:31:20 with gcc 4.5.0 (GCC) 20100414 (Fedora MinGW 4.5. 0-1.fc14) configuration: --prefix=/var/www/users/research/ffmpeg/snapshots/build --arch= x86 --target-os=mingw32 --cross-prefix=i686-pc-mingw32- --cc='ccache i686 -pc-min gw32-gcc' --enable-w32threads --enable-memalign-hack --enable-runtime- cpudetect --enable-cross-compile --enable-static --disable-shared --extra- libs='-lws2_32 - lwinmm -lpthread' --extra-cflags='--static -I/var/www/users/research/ffmpeg/snap shots/build/include' --extra-ldflags='-static -L/var/www/users/research/ffmpeg/s napshots/build/lib' --enable-bzlib --enable-zlib --enable-gpl --enable- version3 --enable-nonfree --enable-libx264 --enable-libspeex --enable-libtheora --enable- libvorbis --enable-libfaac --enable-libxvid --enable-libopencore-amrnb --enable- libopencore-amrwb --enable-libmp3lame --enable-libvpx --disable- decoder=libvpx libavutil 52. 1.100 / 52. 1.100 libavcodec 54. 70.100 / 54. 70.100 libavformat 54. 35.100 / 54. 35.100 libavdevice 54. 3.100 / 54. 3.100 libavfilter 3. 21.106 / 3. 21.106 libswscale 2. 1.102 / 2. 1.102 libswresample 0. 16.100 / 0. 16.100 libpostproc 52. 1.100 / 52. 1.100 [h264 @ 0x1edcac0] missing picture in access unit with size 1941 [h264 @ 0x1edcac0] no frame! [h264 @ 0x1edcac0] missing picture in access unit with size 2377 [h264 @ 0x1edcac0] no frame! [h264 @ 0x1edcac0] missing picture in access unit with size 2090 [h264 @ 0x1edcac0] no frame! [h264 @ 0x1edcac0] missing picture in access unit with size 2305 [h264 @ 0x1edcac0] no frame! [h264 @ 0x1edcac0] missing picture in access unit with size 3280 [h264 @ 0x1edcac0] no frame! [h264 @ 0x1edcac0] missing picture in access unit with size 2963 [h264 @ 0x1edcac0] no frame! [h264 @ 0x1edcac0] missing picture in access unit with size 2624 [h264 @ 0x1edcac0] no frame! [h264 @ 0x1edcac0] illegal log2_max_frame_num 50 [h264 @ 0x1edcac0] missing picture in access unit with size 2937 [h264 @ 0x1edcac0] illegal log2_max_frame_num 50 Last message repeated 1 times [h264 @ 0x1edcac0] no frame! [h264 @ 0x1edcac0] sps_id out of range [h264 @ 0x1edcac0] missing picture in access unit with size 4221 [h264 @ 0x1edcac0] sps_id out of range [h264 @ 0x1edcac0] no frame! [h264 @ 0x1edcac0] non-existing PPS referenced [h264 @ 0x1edcac0] non-existing PPS 3 referenced [h264 @ 0x1edcac0] decode_slice_header error [h264 @ 0x1edcac0] no frame! [h264 @ 0x1edcac0] missing picture in access unit with size 4270 [h264 @ 0x1edcac0] no frame! [h264 @ 0x1edcac0] missing picture in access unit with size 3875 [h264 @ 0x1edcac0] no frame! [h264 @ 0x1edcac0] non-existing PPS referenced [h264 @ 0x1edcac0] slice type too large (2) at 0 0 [h264 @ 0x1edcac0] decode_slice_header error [h264 @ 0x1edcac0] sps_id out of range [h264 @ 0x1edcac0] no frame! [h264 @ 0x1edcac0] missing picture in access unit with size 4394 [h264 @ 0x1edcac0] no frame! [h264 @ 0x1edcac0] missing picture in access unit with size 4743 [h264 @ 0x1edcac0] Partitioned H.264 support is incomplete [h264 @ 0x1edcac0] missing picture in access unit with size 5338 [h264 @ 0x1edcac0] no frame! [h264 @ 0x1edcac0] missing picture in access unit with size 6106 [h264 @ 0x1edcac0] no frame! [h264 @ 0x1edcac0] sps_id (32) out of range [h264 @ 0x1edcac0] missing picture in access unit with size 5938 [h264 @ 0x1edcac0] sps_id (32) out of range Last message repeated 1 times [h264 @ 0x1edcac0] no frame! [h264 @ 0x1edcac0] missing picture in access unit with size 5345 [h264 @ 0x1edcac0] no frame! [h264 @ 0x1edcac0] non-existing PPS referenced [h264 @ 0x1edcac0] non-existing PPS 1 referenced [h264 @ 0x1edcac0] decode_slice_header error [h264 @ 0x1edcac0] too many reference frames Last message repeated 1 times [h264 @ 0x1edcac0] non-existing PPS 0 referenced [h264 @ 0x1edcac0] decode_slice_header error [h264 @ 0x1edcac0] non-existing PPS 0 referenced [h264 @ 0x1edcac0] decode_slice_header error [h264 @ 0x1edcac0] sps_id out of range [h264 @ 0x1edcac0] no frame! [h264 @ 0x1edcac0] missing picture in access unit with size 5498 [h264 @ 0x1edcac0] Partitioned H.264 support is incomplete [h264 @ 0x1edcac0] non-existing PPS referenced [h264 @ 0x1edcac0] non-existing PPS 10 referenced [h264 @ 0x1edcac0] decode_slice_header error [h264 @ 0x1edcac0] no frame! [h264 @ 0x1edcac0] non-existing PPS referenced [h264 @ 0x1edcac0] non-existing PPS 0 referenced [h264 @ 0x1edcac0] decode_slice_header error [h264 @ 0x1edcac0] Partitioned H.264 support is incomplete [h264 @ 0x1edcac0] sps_id out of range [h264 @ 0x1edcac0] missing picture in access unit with size 5630 [h264 @ 0x1edcac0] sps_id out of range [h264 @ 0x1edcac0] no frame! [h264 @ 0x1edcac0] missing picture in access unit with size 5714 [h264 @ 0x1edcac0] non-existing PPS 2 referenced [h264 @ 0x1edcac0] decode_slice_header error [h264 @ 0x1edcac0] no frame! [h264 @ 0x1edcac0] sps_id out of range Last message repeated 1 times [h264 @ 0x1edcac0] missing picture in access unit with size 5525 [h264 @ 0x1edcac0] sps_id out of range Last message repeated 1 times [h264 @ 0x1edcac0] no frame! [h264 @ 0x1edcac0] non-existing PPS referenced [h264 @ 0x1edcac0] non-existing PPS 0 referenced [h264 @ 0x1edcac0] decode_slice_header error [h264 @ 0x1edcac0] non-existing PPS 0 referenced [h264 @ 0x1edcac0] decode_slice_header error [h264 @ 0x1edcac0] no frame! [h264 @ 0x1edcac0] non-existing PPS referenced [h264 @ 0x1edcac0] slice type too large (2) at 0 0 [h264 @ 0x1edcac0] decode_slice_header error [h264 @ 0x1edcac0] missing picture in access unit with size 5623 [h264 @ 0x1edcac0] no frame! [h264 @ 0x1edcac0] FMO not supported [h264 @ 0x1edcac0] non-existing PPS referenced [h264 @ 0x1edcac0] FMO not supported [h264 @ 0x1edcac0] non-existing PPS 227 referenced [h264 @ 0x1edcac0] decode_slice_header error [h264 @ 0x1edcac0] no frame! [h264 @ 0x1edcac0] non-existing PPS referenced [h264 @ 0x1edcac0] non-existing PPS 0 referenced [h264 @ 0x1edcac0] decode_slice_header error [h264 @ 0x1edcac0] get_buffer() failed (-12 0 0) [h264 @ 0x1edcac0] decode_slice_header error [h264 @ 0x1edcac0] sps_id out of range [h264 @ 0x1edcac0] no frame! [h264 @ 0x1edcac0] non-existing PPS referenced [h264 @ 0x1edcac0] non-existing PPS 0 referenced [h264 @ 0x1edcac0] decode_slice_header error [h264 @ 0x1edcac0] no frame! [h264 @ 0x1edcac0] illegal POC type 7 [h264 @ 0x1edcac0] non-existing PPS referenced [h264 @ 0x1edcac0] illegal POC type 7 Last message repeated 1 times [h264 @ 0x1edcac0] slice type too large (3) at 0 0 [h264 @ 0x1edcac0] decode_slice_header error [h264 @ 0x1edcac0] non-existing PPS 3 referenced [h264 @ 0x1edcac0] decode_slice_header error [h264 @ 0x1edcac0] non-existing PPS 6 referenced [h264 @ 0x1edcac0] decode_slice_header error [h264 @ 0x1edcac0] no frame! [h264 @ 0x1edcac0] non-existing PPS referenced [h264 @ 0x1edcac0] non-existing PPS 13 referenced [h264 @ 0x1edcac0] decode_slice_header error [h264 @ 0x1edcac0] non-existing PPS 0 referenced [h264 @ 0x1edcac0] decode_slice_header error [h264 @ 0x1edcac0] non-existing PPS 10 referenced [h264 @ 0x1edcac0] decode_slice_header error [h264 @ 0x1edcac0] Partitioned H.264 support is incomplete [h264 @ 0x1edcac0] missing picture in access unit with size 5668 [h264 @ 0x1edcac0] no frame! [h264 @ 0x1edcac0] sps_id (32) out of range [h264 @ 0x1edcac0] missing picture in access unit with size 5753 [h264 @ 0x1edcac0] sps_id (32) out of range Last message repeated 1 times [h264 @ 0x1edcac0] no frame! [h264 @ 0x1edcac0] missing picture in access unit with size 5903 [h264 @ 0x1edcac0] no frame! [h264 @ 0x1edcac0] non-existing PPS referenced [h264 @ 0x1edcac0] non-existing PPS 6 referenced [h264 @ 0x1edcac0] decode_slice_header error [h264 @ 0x1edcac0] no frame! [h264 @ 0x1edcac0] non-existing PPS referenced [h264 @ 0x1edcac0] non-existing PPS 0 referenced [h264 @ 0x1edcac0] decode_slice_header error [h264 @ 0x1edcac0] non-existing PPS 0 referenced [h264 @ 0x1edcac0] decode_slice_header error [h264 @ 0x1edcac0] no frame! [h264 @ 0x1edcac0] missing picture in access unit with size 5680 [h264 @ 0x1edcac0] no frame! [h264 @ 0x1edcac0] get_buffer() failed (-12 0 0) [h264 @ 0x1edcac0] decode_slice_header error [h264 @ 0x1edcac0] no frame! Input #0, avi, from 'h264.avi': Duration: 00:00:12.64, start: 0.000000, bitrate: 788 kb/s Stream #0:0: Video: h264 (H264 / 0x34363248), yuv420p, 19968x3808, 12.33 fps , 23.98 tbr, 23.97 tbn, 47.94 tbc At least one output file must be specified }}} if I block mem request from ffmpeg I get crash {{{ (gdb) r -i h264.avi Starting program: d:\mingw\msys\1.0\ffmpeg-head-4f92d31\ffmpeg_g.exe -i h264.avi [New Thread 200.0x70c] ffmpeg version 0.11.1.git-4f92d31 Copyright (c) 2000-2012 the FFmpeg developers built on Aug 28 2012 14:56:41 with gcc 4.6.1 (GCC) configuration: --disable-ffprobe --disable-ffplay --enable-gpl libavutil 51. 70.100 / 51. 70.100 libavcodec 54. 54.100 / 54. 54.100 libavformat 54. 25.104 / 54. 25.104 libavdevice 54. 2.100 / 54. 2.100 libavfilter 3. 13.101 / 3. 13.101 libswscale 2. 1.101 / 2. 1.101 libswresample 0. 15.100 / 0. 15.100 libpostproc 52. 0.100 / 52. 0.100 [h264 @ 04490920] missing picture in access unit with size 1941 [h264 @ 04490920] no frame! [h264 @ 04490920] missing picture in access unit with size 2377 [h264 @ 04490920] no frame! [h264 @ 04490920] missing picture in access unit with size 2090 [h264 @ 04490920] no frame! [h264 @ 04490920] missing picture in access unit with size 2305 [h264 @ 04490920] no frame! [h264 @ 04490920] missing picture in access unit with size 3280 [h264 @ 04490920] no frame! [h264 @ 04490920] missing picture in access unit with size 2963 [h264 @ 04490920] no frame! [h264 @ 04490920] missing picture in access unit with size 2624 [h264 @ 04490920] no frame! [h264 @ 04490920] illegal log2_max_frame_num 50 [h264 @ 04490920] missing picture in access unit with size 2937 [h264 @ 04490920] illegal log2_max_frame_num 50 Last message repeated 1 times [h264 @ 04490920] no frame! [h264 @ 04490920] sps_id out of range [h264 @ 04490920] missing picture in access unit with size 4221 [h264 @ 04490920] sps_id out of range [h264 @ 04490920] no frame! [h264 @ 04490920] non-existing PPS referenced [h264 @ 04490920] non-existing PPS 3 referenced [h264 @ 04490920] decode_slice_header error [h264 @ 04490920] no frame! [h264 @ 04490920] missing picture in access unit with size 4270 [h264 @ 04490920] no frame! [h264 @ 04490920] missing picture in access unit with size 3875 [h264 @ 04490920] no frame! [h264 @ 04490920] non-existing PPS referenced [h264 @ 04490920] slice type too large (2) at 0 0 [h264 @ 04490920] decode_slice_header error [h264 @ 04490920] sps_id out of range [h264 @ 04490920] no frame! [h264 @ 04490920] missing picture in access unit with size 4394 [h264 @ 04490920] no frame! [h264 @ 04490920] missing picture in access unit with size 4743 [h264 @ 04490920] Partitioned H.264 support is incomplete [h264 @ 04490920] missing picture in access unit with size 5338 [h264 @ 04490920] no frame! [h264 @ 04490920] missing picture in access unit with size 6106 [h264 @ 04490920] no frame! [h264 @ 04490920] sps_id (32) out of range [h264 @ 04490920] missing picture in access unit with size 5938 [h264 @ 04490920] sps_id (32) out of range Last message repeated 1 times [h264 @ 04490920] no frame! [h264 @ 04490920] missing picture in access unit with size 5345 [h264 @ 04490920] no frame! [h264 @ 04490920] non-existing PPS referenced [h264 @ 04490920] non-existing PPS 1 referenced [h264 @ 04490920] decode_slice_header error [h264 @ 04490920] too many reference frames Last message repeated 1 times [h264 @ 04490920] non-existing PPS 0 referenced [h264 @ 04490920] decode_slice_header error [h264 @ 04490920] non-existing PPS 0 referenced [h264 @ 04490920] decode_slice_header error [h264 @ 04490920] sps_id out of range [h264 @ 04490920] no frame! [h264 @ 04490920] missing picture in access unit with size 5498 [h264 @ 04490920] Partitioned H.264 support is incomplete [h264 @ 04490920] non-existing PPS referenced [h264 @ 04490920] non-existing PPS 10 referenced [h264 @ 04490920] decode_slice_header error [h264 @ 04490920] no frame! [h264 @ 04490920] non-existing PPS referenced [h264 @ 04490920] non-existing PPS 0 referenced [h264 @ 04490920] decode_slice_header error [h264 @ 04490920] Partitioned H.264 support is incomplete [h264 @ 04490920] sps_id out of range [h264 @ 04490920] missing picture in access unit with size 5630 [h264 @ 04490920] sps_id out of range [h264 @ 04490920] no frame! [h264 @ 04490920] missing picture in access unit with size 5714 [h264 @ 04490920] non-existing PPS 2 referenced [h264 @ 04490920] decode_slice_header error [h264 @ 04490920] no frame! [h264 @ 04490920] sps_id out of range Last message repeated 1 times [h264 @ 04490920] missing picture in access unit with size 5525 [h264 @ 04490920] sps_id out of range Last message repeated 1 times [h264 @ 04490920] no frame! [h264 @ 04490920] non-existing PPS referenced [h264 @ 04490920] non-existing PPS 0 referenced [h264 @ 04490920] decode_slice_header error [h264 @ 04490920] non-existing PPS 0 referenced [h264 @ 04490920] decode_slice_header error [h264 @ 04490920] no frame! [h264 @ 04490920] non-existing PPS referenced [h264 @ 04490920] slice type too large (2) at 0 0 [h264 @ 04490920] decode_slice_header error [h264 @ 04490920] no frame! [h264 @ 04490920] missing picture in access unit with size 5623 [h264 @ 04490920] no frame! [h264 @ 04490920] FMO not supported [h264 @ 04490920] non-existing PPS referenced [h264 @ 04490920] FMO not supported [h264 @ 04490920] non-existing PPS 227 referenced [h264 @ 04490920] decode_slice_header error [h264 @ 04490920] no frame! [h264 @ 04490920] non-existing PPS referenced [h264 @ 04490920] non-existing PPS 0 referenced [h264 @ 04490920] decode_slice_header error [h264 @ 04490920] get_buffer() failed (-12 0 00000000) [h264 @ 04490920] decode_slice_header error [h264 @ 04490920] sps_id out of range [h264 @ 04490920] concealing 297024 DC, 297024 AC, 297024 MV errors in P frame Program received signal SIGSEGV, Segmentation fault. 0x00b553a8 in guess_dc (s=0x44efe80, dc=0x4be13c4, w=2496, h=476, stride=2497, is_luma=1) at libavcodec/error_resilience.c:197 197 col [b_x + b_y*stride][1]= color; (gdb) bt #0 0x00b553a8 in guess_dc (s=0x44efe80, dc=0x4be13c4, w=2496, h=476, stride=2497, is_luma=1) at libavcodec/error_resilience.c:197 #1 0x008ed659 in ff_er_frame_end (s=0x44efe80) at libavcodec/error_resilience.c:1249 #2 0x0064818c in field_end (h=0x44efe80, in_setup=<optimized out>) at libavcodec/h264.c:2283 #3 0x00664f26 in decode_frame (avctx=0x4490920, data=0x22f5e0, data_size=0x22f7d8, avpkt=0x22f558) at libavcodec/h264.c:4139 #4 0x0055848b in avcodec_decode_video2 (avctx=0x4490920, picture=0x22f5e0, got_picture_ptr=0x22f7d8, avpkt=0x22f770) at libavcodec/utils.c:1512 #5 0x0047bbf2 in try_decode_frame (st=0x43adb40, avpkt=<optimized out>, options=<optimized out>) at libavformat/utils.c:2377 #6 0x004839c0 in avformat_find_stream_info (ic=0x43ad4e0, options=0x43a2740) at libavformat/utils.c:2749 #7 0x004056d7 in opt_input_file (optctx=0x22fd68, opt=0x43a2924 "i", filename=<optimized out>) at ffmpeg_opt.c:770 #8 0x00415467 in parse_option (optctx=0x22fd68, opt=<optimized out>, arg=0x43a2926 "h264.avi", options=0xb8caa0) at cmdutils.c:320 #9 0x004156d6 in parse_options (optctx=0x22fd68, argc=3, argv=<optimized out>, options=0xb8caa0, parse_arg_function=0x40616c <opt_output_file>) at cmdutils.c:353 #10 0x00b1a042 in main (argc=3, argv=<optimized out>) at ffmpeg.c:3126 (gdb) }}} -- Ticket URL: <https://ffmpeg.org/trac/ffmpeg/ticket/1900> FFmpeg <http://ffmpeg.org> FFmpeg issue tracker

1 17

#925(undetermined:new): lead h263 - reject files encoded in "high compression" / rtp modes
by FFmpeg 24 Aug '13

24 Aug '13

#925: lead h263 - reject files encoded in "high compression" / rtp modes -------------------------------------+------------------------------------- Reporter: ami_stuff | Type: defect Status: new | Priority: normal Component: | Version: undetermined | unspecified Keywords: | Blocked By: Blocking: | Reproduced by developer: 0 Analyzed by developer: 0 | -------------------------------------+------------------------------------- I attache also "normal" file for comparison. {{{ C:\>ffmpeg -i lead_h263_ehc.avi out.avi ffmpeg version N-36890-g67f5650 Copyright (c) 2000-2012 the FFmpeg developers built on Jan 16 2012 21:57:13 with gcc 4.6.2 configuration: --enable-gpl --enable-version3 --disable-w32threads --enable-ru ntime-cpudetect --enable-avisynth --enable-bzlib --enable-frei0r --enable- libope ncore-amrnb --enable-libopencore-amrwb --enable-libfreetype --enable- libgsm --en able-libmp3lame --enable-libopenjpeg --enable-librtmp --enable- libschroedinger - -enable-libspeex --enable-libtheora --enable-libvo-aacenc --enable-libvo- amrwben c --enable-libvorbis --enable-libvpx --enable-libx264 --enable-libxavs --enable- libxvid --enable-zlib libavutil 51. 34.100 / 51. 34.100 libavcodec 53. 56.105 / 53. 56.105 libavformat 53. 30.100 / 53. 30.100 libavdevice 53. 4.100 / 53. 4.100 libavfilter 2. 59.100 / 2. 59.100 libswscale 2. 1.100 / 2. 1.100 libswresample 0. 6.100 / 0. 6.100 libpostproc 51. 2.100 / 51. 2.100 [avi @ 020F2320] non-interleaved AVI Input #0, avi, from 'lead_h263_ehc.avi': Duration: 00:00:03.00, start: 0.000000, bitrate: 143 kb/s Stream #0:0: Video: h263 (L263 / 0x3336324C), yuv420p, 720x480, 1 tbr, 1 tbn , 1 tbc [buffer @ 02101FA0] w:720 h:480 pixfmt:yuv420p tb:1/1000000 sar:0/1 sws_param: Output #0, avi, to 'out.avi': Metadata: ISFT : Lavf53.30.100 Stream #0:0: Video: mpeg4 (FMP4 / 0x34504D46), yuv420p, 720x480, q=2-31, 200 kb/s, 1 tbn, 1 tbc Stream mapping: Stream #0:0 -> #0:0 (h263 -> mpeg4) Press [q] to stop, [?] for help frame= 2 fps= 0 q=2.0 Lsize= 90kB time=00:00:03.00 bitrate= 246.1kbits/ s video:85kB audio:0kB global headers:0kB muxing overhead 6.649102% }}} {{{ C:\>ffmpeg -i lead_h263_rtp.avi out.avi ffmpeg version N-36890-g67f5650 Copyright (c) 2000-2012 the FFmpeg developers built on Jan 16 2012 21:57:13 with gcc 4.6.2 configuration: --enable-gpl --enable-version3 --disable-w32threads --enable-ru ntime-cpudetect --enable-avisynth --enable-bzlib --enable-frei0r --enable- libope ncore-amrnb --enable-libopencore-amrwb --enable-libfreetype --enable- libgsm --en able-libmp3lame --enable-libopenjpeg --enable-librtmp --enable- libschroedinger - -enable-libspeex --enable-libtheora --enable-libvo-aacenc --enable-libvo- amrwben c --enable-libvorbis --enable-libvpx --enable-libx264 --enable-libxavs --enable- libxvid --enable-zlib libavutil 51. 34.100 / 51. 34.100 libavcodec 53. 56.105 / 53. 56.105 libavformat 53. 30.100 / 53. 30.100 libavdevice 53. 4.100 / 53. 4.100 libavfilter 2. 59.100 / 2. 59.100 libswscale 2. 1.100 / 2. 1.100 libswresample 0. 6.100 / 0. 6.100 libpostproc 51. 2.100 / 51. 2.100 [avi @ 020F2320] non-interleaved AVI Input #0, avi, from 'lead_h263_rtp.avi': Duration: 00:00:03.00, start: 0.000000, bitrate: 218 kb/s Stream #0:0: Video: h263 (L263 / 0x3336324C), yuv420p, 720x480, 1 tbr, 1 tbn , 1 tbc w:720 h:480 pixfmt:yuv420p tb:1/1000000 sar:0/1 sws_param: Output #0, avi, to 'out.avi': Metadata: ISFT : Lavf53.30.100 Stream #0:0: Video: mpeg4 (FMP4 / 0x34504D46), yuv420p, 720x480, q=2-31, 200 kb/s, 1 tbn, 1 tbc Stream mapping: Stream #0:0 -> #0:0 (h263 -> mpeg4) Press [q] to stop, [?] for help [h263 @ 020FA3E0] illegal ac vlc code at 19x0 [h263 @ 020FA3E0] Error at MB: 19 [h263 @ 020FA3E0] I cbpy damaged at 0 24 [h263 @ 020FA3E0] Error at MB: 1104 [h263 @ 020FA3E0] illegal ac vlc code at 23x26 [h263 @ 020FA3E0] Error at MB: 1219 [h263 @ 020FA3E0] I cbpy damaged at 26 20 [h263 @ 020FA3E0] Error at MB: 946 [h263 @ 020FA3E0] illegal ac vlc code at 27x0 [h263 @ 020FA3E0] Error at MB: 27 [h263 @ 020FA3E0] illegal ac vlc code at 29x16 [h263 @ 020FA3E0] Error at MB: 765 [h263 @ 020FA3E0] illegal ac vlc code at 21x0 [h263 @ 020FA3E0] Error at MB: 21 [h263 @ 020FA3E0] I cbpy damaged at 1 10 [h263 @ 020FA3E0] Error at MB: 461 [h263 @ 020FA3E0] illegal ac vlc code at 25x14 [h263 @ 020FA3E0] Error at MB: 669 [h263 @ 020FA3E0] illegal ac vlc code at 20x8 [h263 @ 020FA3E0] Error at MB: 388 [h263 @ 020FA3E0] illegal ac vlc code at 18x14 [h263 @ 020FA3E0] Error at MB: 662 [h263 @ 020FA3E0] I cbpy damaged at 5 26 [h263 @ 020FA3E0] Error at MB: 1201 [h263 @ 020FA3E0] I cbpy damaged at 3 12 [h263 @ 020FA3E0] Error at MB: 555 [h263 @ 020FA3E0] illegal ac vlc code at 16x18 [h263 @ 020FA3E0] Error at MB: 844 [h263 @ 020FA3E0] I cbpy damaged at 0 2 [h263 @ 020FA3E0] Error at MB: 92 [h263 @ 020FA3E0] I cbpy damaged at 18 0 [h263 @ 020FA3E0] Error at MB: 18 [h263 @ 020FA3E0] illegal ac vlc code at 18x4 [h263 @ 020FA3E0] Error at MB: 202 [h263 @ 020FA3E0] illegal ac vlc code at 15x24 [h263 @ 020FA3E0] Error at MB: 1119 [h263 @ 020FA3E0] I cbpy damaged at 3 0 [h263 @ 020FA3E0] Error at MB: 3 [h263 @ 020FA3E0] I cbpy damaged at 3 0 [h263 @ 020FA3E0] Error at MB: 3 [h263 @ 020FA3E0] illegal ac vlc code at 25x10 [h263 @ 020FA3E0] Error at MB: 485 [h263 @ 020FA3E0] I cbpy damaged at 2 20 [h263 @ 020FA3E0] Error at MB: 922 [h263 @ 020FA3E0] illegal ac vlc code at 6x10 [h263 @ 020FA3E0] Error at MB: 466 [h263 @ 020FA3E0] illegal ac vlc code at 18x26 [h263 @ 020FA3E0] Error at MB: 1214 [h263 @ 020FA3E0] illegal ac vlc code at 18x6 [h263 @ 020FA3E0] Error at MB: 294 [h263 @ 020FA3E0] run overflow at 1x4 i:1 [h263 @ 020FA3E0] Error at MB: 185 [h263 @ 020FA3E0] illegal ac vlc code at 32x0 [h263 @ 020FA3E0] Error at MB: 32 [h263 @ 020FA3E0] illegal ac vlc code at 25x22 [h263 @ 020FA3E0] Error at MB: 1037 [h263 @ 020FA3E0] illegal ac vlc code at 25x10 [h263 @ 020FA3E0] Error at MB: 485 [h263 @ 020FA3E0] illegal ac vlc code at 29x10 [h263 @ 020FA3E0] Error at MB: 489 [h263 @ 020FA3E0] illegal ac vlc code at 30x16 [h263 @ 020FA3E0] Error at MB: 766 [h263 @ 020FA3E0] illegal ac vlc code at 3x4 [h263 @ 020FA3E0] Error at MB: 187 [h263 @ 020FA3E0] concealing 1350 DC, 1350 AC, 1350 MV errors frame= 2 fps= 0 q=2.0 Lsize= 9kB time=00:00:03.00 bitrate= 25.9kbits/ s video:4kB audio:0kB global headers:0kB muxing overhead 145.733097% }}} -- Ticket URL: <https://ffmpeg.org/trac/ffmpeg/ticket/925> FFmpeg <http://ffmpeg.org> FFmpeg issue tracker

1 6

#1579(undetermined:new): fix remuxing of imaadpcm in wav
by FFmpeg 24 Aug '13

24 Aug '13

#1579: fix remuxing of imaadpcm in wav -------------------------------------+------------------------------------- Reporter: ami_stuff | Owner: Type: defect | Status: new Priority: normal | Component: Version: | undetermined unspecified | Keywords: Blocked By: | Blocking: Reproduced by developer: 0 | Analyzed by developer: 0 -------------------------------------+------------------------------------- ms codec can't decode remuxed file because frame_size is set to 0 with "-acodec copy" http://samples.mplayerhq.hu/A-codecs/ima-adpcm/test_ima_adpcm.wav libavformat/riff.c: {{{ } else if (enc->codec_id == CODEC_ID_GSM_MS || enc->codec_id == CODEC_ID_ADPCM_IMA_WAV) { hdrsize += 2; bytestream_put_le16(&riff_extradata, frame_size); /* wSamplesPerBlock */ + av_log(enc, AV_LOG_WARNING, "frame_size: %d\n", frame_size); }}} {{{ C:\>ffmpeg -i test_ima_adpcm.wav -acodec copy out.wav ffmpeg version N-42891-g9054f6b Copyright (c) 2000-2012 the FFmpeg developers built on Jul 26 2012 02:25:40 with gcc 4.5.0 (GCC) 20100414 (Fedora MinGW 4.5. 0-1.fc14) configuration: --prefix=/var/www/users/research/ffmpeg/snapshots/build --arch= x86 --target-os=mingw32 --cross-prefix=i686-pc-mingw32- --cc='ccache i686 -pc-min gw32-gcc' --enable-w32threads --enable-memalign-hack --enable-runtime- cpudetect --enable-cross-compile --enable-static --disable-shared --extra- libs='-lws2_32 - lwinmm -lpthread' --extra-cflags='--static -I/var/www/users/research/ffmpeg/snap shots/build/include' --extra-ldflags='-static -L/var/www/users/research/ffmpeg/s napshots/build/lib' --enable-bzlib --enable-zlib --enable-gpl --enable- version3 --enable-nonfree --enable-libx264 --enable-libspeex --enable-libtheora --enable- libvorbis --enable-libfaac --enable-libxvid --enable-libopencore-amrnb --enable- libopencore-amrwb --enable-libmp3lame --enable-libvpx --disable- decoder=libvpx libavutil 51. 65.100 / 51. 65.100 libavcodec 54. 44.101 / 54. 44.101 libavformat 54. 20.100 / 54. 20.100 libavdevice 54. 2.100 / 54. 2.100 libavfilter 3. 3.100 / 3. 3.100 libswscale 2. 1.100 / 2. 1.100 libswresample 0. 15.100 / 0. 15.100 libpostproc 52. 0.100 / 52. 0.100 Guessed Channel Layout for Input Stream #0.0 : mono Input #0, wav, from 'test_ima_adpcm.wav': Duration: 00:00:06.28, bitrate: 32 kb/s Stream #0:0: Audio: adpcm_ima_wav ([17][0][0][0] / 0x0011), 8000 Hz, mono, s 16, 32 kb/s Output #0, wav, to 'out.wav': Metadata: encoder : Lavf54.20.100 Stream #0:0: Audio: adpcm_ima_wav ([17][0][0][0] / 0x0011), 8000 Hz, mono, 3 2 kb/s Stream mapping: Stream #0:0 -> #0:0 (copy) Press [q] to stop, [?] for help size= 25kB time=00:00:06.31 bitrate= 32.5kbits/s video:0kB audio:25kB subtitle:0 global headers:0kB muxing overhead 0.234375% }}} -- Ticket URL: <https://ffmpeg.org/trac/ffmpeg/ticket/1579> FFmpeg <http://ffmpeg.org> FFmpeg issue tracker

1 5

#906(FFserver:new): trying to launch ffserver, I get bind(port 8090): Address family not supported by protocol
by FFmpeg 24 Aug '13

24 Aug '13

#906: trying to launch ffserver, I get bind(port 8090): Address family not supported by protocol -------------------------------------+------------------------------------- Reporter: tpereira | Type: defect Status: new | Priority: normal Component: FFserver | Version: Keywords: bind | unspecified address family not supported | Blocked By: protocol | Reproduced by developer: 0 Blocking: | Analyzed by developer: 0 | -------------------------------------+------------------------------------- Im trying to launch ffserver with the original ffserver.conf and I get: bind(port 8090): Address family not supported by protocol Mon Jan 9 20:07:23 2012 Could not start server I recently changed from 2.6.28 to 3.0.6 kernel, and cannot find out which module I need for ffserver to work. IPV4 is working. Exact command line: ffserver -f ./ffserver.conf -loglevel 'debug' Output of ffmpeg -v 9 -loglevel 99 ffmpeg version 0.7.8, Copyright (c) 2000-2011 the FFmpeg developers built on Jan 9 2012 19:25:26 with gcc 4.5.3 configuration: --prefix=/usr --libdir=/usr/lib --shlibdir=/usr/lib --mandir=/usr/share/man --enable-shared --cc=gcc --disable-static --enable-gpl --enable-postproc --enable-avfilter --disable-stripping --disable-debug --disable-doc --disable-vaapi --disable-vdpau --enable- libtheora --enable-libx264 --enable-libxvid --disable-indev=v4l --disable- indev=oss --disable-indev=jack --enable-x11grab --disable-outdev=oss --enable-libfreetype --enable-pthreads --enable-libdirac --enable-librtmp --enable-libschroedinger --disable-altivec --disable-avx --cpu=pentium4 --enable-hardcoded-tables libavutil 50. 43. 0 / 50. 43. 0 libavcodec 52.123. 0 / 52.123. 0 libavformat 52.111. 0 / 52.111. 0 libavdevice 52. 5. 0 / 52. 5. 0 libavfilter 1. 80. 0 / 1. 80. 0 libswscale 0. 14. 1 / 0. 14. 1 libpostproc 51. 2. 0 / 51. 2. 0 Hyper fast Audio and Video encoder usage: ffmpeg [options] [[infile options] -i infile]... {[outfile options] outfile}... -- Ticket URL: <https://ffmpeg.org/trac/ffmpeg/ticket/906> FFmpeg <http://ffmpeg.org> FFmpeg issue tracker

1 4

#750(FFmpeg:new): ffmpeg does not list OGG-theora metadata tags (like title author etc)
by FFmpeg 24 Aug '13

24 Aug '13

#750: ffmpeg does not list OGG-theora metadata tags (like title author etc) ----------------------------------+--------------------------------------- Reporter: RyszardG | Type: defect Status: new | Priority: important Component: FFmpeg | Version: unspecified Keywords: | Blocked By: Blocking: | Reproduced by developer: 0 Analyzed by developer: 0 | ----------------------------------+--------------------------------------- I can transcode one ogg to second with adding tags: ffmpeg -i recRLBM.ogv -metadata TITLE="My title" -metadata ARTIST="Me" output.ogv Tags are correctly added (what can I see when I run any video player and open output.ogv). But when I run ffmpeg: ffmpeg -i output.ogv something.ogv I don't have these metadata informations displayed on the Input #0: ffmpeg version 0.8.7.git-366605f, Copyright (c) 2000-2011 the FFmpeg developers built on Dec 14 2011 17:44:52 with gcc 4.4.5 configuration: --prefix=/home/ryszard/NX-4.0.155/Build --disable-doc --disable-everything --enable-muxer=ogg --enable-demuxer=ogg --enable- muxer=webm --enable-demuxer=webm --enable-muxer=matroska --enable- demuxer=matroska --enable-muxer=rawvideo --enable-demuxer=rawvideo --enable-muxer=mpeg1system --enable-muxer=mpeg1vcd --enable- muxer=mpeg1video --enable-demuxer=mpegvideo --enable-demuxer=mpeg1system --enable-demuxer=mpeg1system --enable-demuxer=mpegps --enable- encoder=libtheora --enable-decoder=theora --enable-encoder=libvpx --enable-decoder=libvpx --enable-encoder=mpeg1video --enable- decoder=mpeg1video --enable-decoder=mpegvideo --enable-encoder=rawvideo --enable-decoder=rawvideo --enable-parser=mpegvideo --enable-filter=format --enable-protocol=pipe --enable-protocol=tcp --enable-protocol=file --enable-filter=scale --enable-libvpx --enable-libtheora --enable-zlib libavutil 51. 32. 0 / 51. 32. 0 libavcodec 53. 44. 0 / 53. 44. 0 libavformat 53. 25. 0 / 53. 25. 0 libavdevice 53. 4. 0 / 53. 4. 0 libavfilter 2. 53. 0 / 2. 53. 0 libswscale 2. 1. 0 / 2. 1. 0 Input #0, ogg, from 'output.ogv': Duration: 00:00:00.50, start: 0.000000, bitrate: 1046 kb/s Stream #0:0: Video: theora, yuv420p, 1440x900 [SAR 1:1 DAR 8:5], 10 tbr, 10 tbn, 10 tbc File 'something.ogv' already exists. Overwrite ? [y/N] Y w:1440 h:900 pixfmt:yuv420p tb:1/1000000 sar:1/1 sws_param: Output #0, ogg, to 'something.ogv': Metadata: encoder : Lavf53.25.0 Stream #0:0: Video: theora, yuv420p, 1440x900 [SAR 1:1 DAR 8:5], q=2-31, 200 kb/s, 10 tbn, 10 tbc Stream mapping: Stream #0:0 -> #0:0 (theora -> libtheora) Press [q] to stop, [?] for help -- Ticket URL: <https://ffmpeg.org/trac/ffmpeg/ticket/750> FFmpeg <http://ffmpeg.org> FFmpeg issue tracker

1 8

#502(undetermined:new): Jumping frames when copying video of an h264 file
by FFmpeg 24 Aug '13

24 Aug '13

#502: Jumping frames when copying video of an h264 file -------------------------------------+------------------------------------- Reporter: Alex__ | Type: defect Status: new | Priority: normal Component: | Version: git- undetermined | master Keywords: | Blocked By: Blocking: | Reproduced by developer: 0 Analyzed by developer: 0 | -------------------------------------+------------------------------------- Description: Jumping frames when copying video of an h264 file Version: latest trunk URL: see below Steps that will reproduce the problem? ffmpeg -i sample.avi -vcodec copy sample-copy.m4v What is the expected result? Converted file w/o any issues. What happens instead? The frames "jump" in the converted file when playing it with QuickTimePlayer X 10.1 (more) or VLC (less). Possible workaround: ffmpeg -i sample.avi sample-copy.m4v Any additional information: * Example: see below * Command: {{{ $ ffmpeg -y -i sample.avi -vcodec copy sample-copy.m4v ffmpeg version N-30168-g6d789f5, Copyright (c) 2000-2011 the FFmpeg developers built on Sep 23 2011 09:20:16 with clang 2.1 (tags/Apple/clang-163.7.1) configuration: --enable-zlib --disable-debug --enable-libfaac --enable- libx264 --enable-gpl --enable-nonfree --enable-libmp3lame --enable- libtheora --enable-libvorbis --enable-libvpx --enable-libxvid --cc=clang libavutil 51. 17. 0 / 51. 17. 0 libavcodec 53. 17. 0 / 53. 17. 0 libavformat 53. 13. 0 / 53. 13. 0 libavdevice 53. 4. 0 / 53. 4. 0 libavfilter 2. 43. 3 / 2. 43. 3 libswscale 2. 1. 0 / 2. 1. 0 libpostproc 51. 2. 0 / 51. 2. 0 Input #0, avi, from 'sample.avi': Metadata: encoder : transcode-1.0.7rc1 Duration: 02:02:15.00, start: 0.000000, bitrate: 0 kb/s Stream #0.0: Video: h264 (Main) (H264 / 0x34363248), yuv420p, 720x576 [SAR 16:15 DAR 4:3], 25 fps, 25 tbr, 25 tbn, 50 tbc Stream #0.1: Audio: mp3 (U[0][0][0] / 0x0055), 48000 Hz, stereo, s16, 192 kb/s Output #0, ipod, to 'sample-copy.m4v': Metadata: encoder : Lavf53.13.0 Stream #0.0: Video: h264 (avc1 / 0x31637661), yuv420p, 720x576 [SAR 16:15 DAR 4:3], q=2-31, 25 tbn, 25 tbc Stream #0.1: Audio: aac (mp4a / 0x6134706D), 48000 Hz, stereo, s16, 128 kb/s Stream mapping: Stream #0.0 -> #0.0 (copy) Stream #0.1 -> #0.1 (mp3 -> libfaac) Press [q] to stop, [?] for help [ipod @ 0x7ff8f32d1c00] pts has no value Last message repeated 64 times frame= 65 fps= 0 q=-1.0 Lsize= 479kB time=00:00:02.60 bitrate=1509.5kbits/s video:436kB audio:40kB global headers:0kB muxing overhead 0.564932% }}} -- Ticket URL: <https://avcodec.org/trac/ffmpeg/ticket/502> FFmpeg <http://ffmpeg.org> FFmpeg issue tracker

1 19

#538(avcodec:new): J2K files with 444p are incorrectly written
by FFmpeg 24 Aug '13

24 Aug '13

#538: J2K files with 444p are incorrectly written --------------------------------------+--------------------------------- Reporter: cehoyos | Owner: Type: defect | Status: new Priority: normal | Component: avcodec Version: git-master | Keywords: Blocked By: | Blocking: Reproduced by developer: 0 | Analyzed by developer: 0 --------------------------------------+--------------------------------- Files written with yuv444p cannot be read. {{{ ./ffmpeg -i tests/lena.pnm -pix_fmt yuv444p -strict experimental out.jp2 ffmpeg version N-33430-gcb50ada, Copyright (c) 2000-2011 the FFmpeg developers built on Oct 9 2011 20:28:29 with gcc 4.5.3 configuration: --cc=/usr/local/gcc-4.5.3/bin/gcc libavutil 51. 20. 1 / 51. 20. 1 libavcodec 53. 19. 1 / 53. 19. 1 libavformat 53. 14. 0 / 53. 14. 0 libavdevice 53. 4. 0 / 53. 4. 0 libavfilter 2. 43. 6 / 2. 43. 6 libswscale 2. 1. 0 / 2. 1. 0 Input #0, image2, from 'tests/lena.pnm': Duration: 00:00:00.04, start: 0.000000, bitrate: N/A Stream #0:0: Video: ppm, rgb24, 256x256, 25 tbr, 25 tbn, 25 tbc [buffer @ 0x12d9e20] w:256 h:256 pixfmt:rgb24 tb:1/1000000 sar:0/1 sws_param: [buffersink @ 0x12cf7e0] auto-inserting filter 'auto-inserted scale 0' between the filter 'src' and the filter 'out' [scale @ 0x12d0000] w:256 h:256 fmt:rgb24 -> w:256 h:256 fmt:yuv444p flags:0x4 Output #0, image2, to 'out.jp2': Metadata: encoder : Lavf53.14.0 Stream #0:0: Video: j2k, yuv444p, 256x256, q=2-31, 200 kb/s, 90k tbn, 25 tbc Stream mapping: Stream #0.0 -> #0.0 (ppm -> j2k) Press [q] to stop, [?] for help frame= 1 fps= 0 q=0.0 Lsize= -0kB time=00:00:00.04 bitrate= -4.4kbits/s video:89kB audio:0kB global headers:0kB muxing overhead -100.024241% }}} {{{ /ffmpeg -i out.jp2 ffmpeg version N-33430-gcb50ada, Copyright (c) 2000-2011 the FFmpeg developers built on Oct 9 2011 20:28:29 with gcc 4.5.3 configuration: --cc=/usr/local/gcc-4.5.3/bin/gcc libavutil 51. 20. 1 / 51. 20. 1 libavcodec 53. 19. 1 / 53. 19. 1 libavformat 53. 14. 0 / 53. 14. 0 libavdevice 53. 4. 0 / 53. 4. 0 libavfilter 2. 43. 6 / 2. 43. 6 libswscale 2. 1. 0 / 2. 1. 0 Input #0, image2, from 'out.jp2': Duration: 00:00:00.04, start: 0.000000, bitrate: N/A Stream #0:0: Video: j2k, rgb24, 256x256, 25 tbr, 25 tbn, 25 tbc At least one output file must be specified }}} -- Ticket URL: <https://avcodec.org/trac/ffmpeg/ticket/538> FFmpeg <http://ffmpeg.org> FFmpeg issue tracker

1 5

#162(undetermined:new): Avid AVI Codec - wrong resolution reported by FFmpeg
by FFmpeg 24 Aug '13

24 Aug '13

#162: Avid AVI Codec - wrong resolution reported by FFmpeg --------------------------+-------------------------- Reporter: ami_stuff | Type: defect Status: new | Priority: normal Component: undetermined | Version: unspecified Keywords: | Blocked By: Blocking: | Reproduced: 0 Analyzed: 0 | --------------------------+-------------------------- issue 1494 https://roundup.libav.org/file579/avid.avi {{{ Author: ami_stuff Date: 2009-10-19.18:53:59 Attached file is encoded with "Avid AVI Codec" and have 720x576 resolution, but FFmpeg reports 720x592 and adds black bar on the top of the video. -------- C:\>ffmpeg -i avid.avi FFmpeg version SVN-r20231, Copyright (c) 2000-2009 Fabrice Bellard, et al. built on Oct 14 2009 04:04:42 with gcc 4.2.4 configuration: --enable-memalign-hack --prefix=/mingw --cross- prefix=i686-ming w32- --cc=ccache-i686-mingw32-gcc --target-os=mingw32 --arch=i686 --cpu=i686 --e nable-avisynth --enable-gpl --enable-version3 --enable-zlib --enable-bzlib --ena ble-libgsm --enable-libfaad --enable-pthreads --enable-libvorbis --enable- libthe ora --enable-libspeex --enable-libmp3lame --enable-libopenjpeg --enable- libxvid --enable-libschroedinger --enable-libx264 --enable-libopencore_amrwb --enable-li bopencore_amrnb libavutil 50. 3. 0 / 50. 3. 0 libavcodec 52.37. 0 / 52.37. 0 libavformat 52.39. 1 / 52.39. 1 libavdevice 52. 2. 0 / 52. 2. 0 libswscale 0. 7. 1 / 0. 7. 1 [mjpeg @ 0x1a68250]Found 1 unreleased buffers! Input #0, avi, from 'avid.avi': Duration: 00:00:01.79, start: 0.000000, bitrate: 4289 kb/s Stream #0.0: Video: mjpeg, yuvj422p, 720x592, 23.97 tbr, 23.97 tbn, 23.97 tb c Stream #0.1: Audio: mp3, 44100 Hz, 2 channels, s16, 128 kb/s At least one output file must be specified }}} {{{ Author: cehoyos Date: 2009-10-19.23:46:14 Reproducible with mplayer avid.avi -vc avid }}} -- Ticket URL: <https://ffmpeg.org/trac/ffmpeg/ticket/162> FFmpeg <http://ffmpeg.org> FFmpeg issue tracker

1 12