January 2014 - FFmpeg-trac - lists.ffmpeg.org

#3263(avformat:new): Matroska rawvideo regression
by FFmpeg 03 Jan '14

03 Jan '14

#3263: Matroska rawvideo regression -------------------------------------+------------------------------------- Reporter: cehoyos | Owner: Type: defect | Status: new Priority: important | Component: avformat Version: git- | Keywords: mkv master | regression Blocked By: | Blocking: Reproduced by developer: 0 | Analyzed by developer: 0 -------------------------------------+------------------------------------- http://thread.gmane.org/gmane.comp.video.ffmpeg.user/49586 Related to ticket #252 Regression since df39c3ce {{{ $ ffmpeg -i tests/lena.pnm -vcodec rawvideo out.mkv ffmpeg version N-59481-ge3868cc Copyright (c) 2000-2014 the FFmpeg developers built on Jan 2 2014 10:21:35 with gcc 4.7 (SUSE Linux) configuration: --enable-gpl libavutil 52. 59.100 / 52. 59.100 libavcodec 55. 47.100 / 55. 47.100 libavformat 55. 22.102 / 55. 22.102 libavdevice 55. 5.102 / 55. 5.102 libavfilter 4. 0.103 / 4. 0.103 libswscale 2. 5.101 / 2. 5.101 libswresample 0. 17.104 / 0. 17.104 libpostproc 52. 3.100 / 52. 3.100 Input #0, image2, from 'tests/lena.pnm': Duration: 00:00:00.04, start: 0.000000, bitrate: N/A Stream #0:0: Video: ppm, rgb24, 256x256, 25 tbr, 25 tbn, 25 tbc Output #0, matroska, to 'out.mkv': Metadata: encoder : Lavf55.22.102 Stream #0:0: Video: rawvideo, rgb24, 256x256, q=2-31, 200 kb/s, 1k tbn, 25 tbc Stream mapping: Stream #0:0 -> #0:0 (ppm -> rawvideo) Press [q] to stop, [?] for help frame= 1 fps=0.0 q=0.0 Lsize= 193kB time=00:00:00.04 bitrate=39436.2kbits/s video:192kB audio:0kB subtitle:0 global headers:0kB muxing overhead 0.291443% }}} {{{ $ ffmpeg -i out.mkv ffmpeg version N-59481-ge3868cc Copyright (c) 2000-2014 the FFmpeg developers built on Jan 2 2014 10:21:35 with gcc 4.7 (SUSE Linux) configuration: --enable-gpl libavutil 52. 59.100 / 52. 59.100 libavcodec 55. 47.100 / 55. 47.100 libavformat 55. 22.102 / 55. 22.102 libavdevice 55. 5.102 / 55. 5.102 libavfilter 4. 0.103 / 4. 0.103 libswscale 2. 5.101 / 2. 5.101 libswresample 0. 17.104 / 0. 17.104 libpostproc 52. 3.100 / 52. 3.100 [rawvideo @ 0x27822a0] Invalid pixel format. [matroska,webm @ 0x2781100] Failed to open codec in av_find_stream_info [rawvideo @ 0x27822a0] Invalid pixel format. Input #0, matroska,webm, from 'out.mkv': Metadata: ENCODER : Lavf55.22.102 Duration: 00:00:00.04, start: 0.000000, bitrate: 39436 kb/s Stream #0:0: Video: rawvideo, 256x256, SAR 1:1 DAR 1:1, 25 fps, 25 tbr, 1k tbn, 1k tbc (default) At least one output file must be specified }}} -- Ticket URL: <https://trac.ffmpeg.org/ticket/3263> FFmpeg <http://ffmpeg.org> FFmpeg issue tracker

1 1

#1769(undetermined:new): Make ffmpeg build string available in avutil.h
by FFmpeg 02 Jan '14

02 Jan '14

#1769: Make ffmpeg build string available in avutil.h -------------------------------------+------------------------------------- Reporter: DonMoir | Type: Status: new | enhancement Component: | Priority: normal undetermined | Version: Keywords: | unspecified Blocking: | Blocked By: Analyzed by developer: 0 | Reproduced by developer: 0 -------------------------------------+------------------------------------- Would be good if this was generally available rather than specifically as it is now in version.h. Also I think a version.h that has the proper build string in it may not be readily available in a general download of the source code. Could be a #define in avutil.h or function call. It's better than any lib_version function for tracking user installations etc. -- Ticket URL: <https://ffmpeg.org/trac/ffmpeg/ticket/1769> FFmpeg <http://ffmpeg.org> FFmpeg issue tracker

1 7

#2323(documentation:new): Internal AAC encoder is missing official documentation entry
by FFmpeg 02 Jan '14

02 Jan '14

#2323: Internal AAC encoder is missing official documentation entry -------------------------------------+------------------------------------- Reporter: burek | Owner: Type: defect | Status: new Priority: normal | Component: Version: | documentation unspecified | Keywords: Blocked By: | Blocking: Reproduced by developer: 0 | Analyzed by developer: 0 -------------------------------------+------------------------------------- On this page http://www.ffmpeg.org/ffmpeg-codecs.html there is a missing entry for internal AAC encoder/decoder. -- Ticket URL: <https://ffmpeg.org/trac/ffmpeg/ticket/2323> FFmpeg <http://ffmpeg.org> FFmpeg issue tracker

1 4

#3254(undetermined:new): atrac3p: crash with fuzzed file
by FFmpeg 02 Jan '14

02 Jan '14

#3254: atrac3p: crash with fuzzed file -------------------------------------+------------------------------------- Reporter: ami_stuff | Owner: Type: defect | Status: new Priority: normal | Component: Version: | undetermined unspecified | Keywords: Blocked By: | Blocking: Reproduced by developer: 0 | Analyzed by developer: 0 -------------------------------------+------------------------------------- {{{ (gdb) r -i 1_fuzz.aa3 -f null - Starting program: /media/sdb1/ffmpeg-HEAD-8a0d446/ffmpeg_g -i 1_fuzz.aa3 -f null - [Thread debugging using libthread_db enabled] Using host libthread_db library "/lib/i386-linux-gnu/libthread_db.so.1". ffmpeg version 2.1.git-8a0d446 Copyright (c) 2000-2013 the FFmpeg developers built on Dec 29 2013 20:43:02 with gcc 4.7 (Debian 4.7.2-5) configuration: --disable-yasm --enable-gpl --disable-ffprobe --disable- ffserver libavutil 52. 59.100 / 52. 59.100 libavcodec 55. 47.100 / 55. 47.100 libavformat 55. 22.100 / 55. 22.100 libavdevice 55. 5.102 / 55. 5.102 libavfilter 4. 0.103 / 4. 0.103 libswscale 2. 5.101 / 2. 5.101 libswresample 0. 17.104 / 0. 17.104 libpostproc 52. 3.100 / 52. 3.100 [oma @ 0x929ed80] Estimating duration from bitrate, this may be inaccurate Input #0, oma, from '1_fuzz.aa3': Metadata: TLEN : 17350 Duration: 00:00:17.69, start: 0.000000, bitrate: 33 kb/s Stream #0:0: Audio: atrac3p ([1][0][0][0] / 0x0001), 44100 Hz, mono, fltp, 33 kb/s [New Thread 0xb7df8b70 (LWP 12809)] [New Thread 0xb75f8b70 (LWP 12810)] [New Thread 0xb6df8b70 (LWP 12811)] [New Thread 0xb65f8b70 (LWP 12812)] [New Thread 0xb5df8b70 (LWP 12813)] [New Thread 0xb55f8b70 (LWP 12814)] [New Thread 0xb4df8b70 (LWP 12815)] [New Thread 0xb45f8b70 (LWP 12816)] [New Thread 0xb3df8b70 (LWP 12817)] Output #0, null, to 'pipe:': Metadata: TLEN : 17350 encoder : Lavf55.22.100 Stream #0:0: Audio: pcm_s16le, 44100 Hz, mono, s16, 705 kb/s Stream mapping: Stream #0:0 -> #0:0 (atrac3plus -> pcm_s16le) Press [q] to stop, [?] for help [atrac3plus @ 0x929f920] Invalid gain location: ch=0, sb=0, pos=2, val=32 Error while decoding stream #0:0: Invalid data found when processing input [atrac3plus @ 0x929f920] GHA amplitude mode 0 is not implemented. Update your FFmpeg version to the newest one from Git. If the problem still occurs, it means that your file has a feature which has not been implemented. Error while decoding stream #0:0: Not yet implemented in FFmpeg, patches welcome [atrac3plus @ 0x929f920] Frame data doesn't match channel configuration! Error while decoding stream #0:0: Invalid data found when processing input [atrac3plus @ 0x929f920] GHA amplitude mode 0 is not implemented. Update your FFmpeg version to the newest one from Git. If the problem still occurs, it means that your file has a feature which has not been implemented. Error while decoding stream #0:0: Not yet implemented in FFmpeg, patches welcome [atrac3plus @ 0x929f920] Invalid gain location: ch=0, sb=0, pos=1, val=0 Error while decoding stream #0:0: Invalid data found when processing input [atrac3plus @ 0x929f920] Invalid gain location: ch=0, sb=0, pos=1, val=0 Error while decoding stream #0:0: Invalid data found when processing input [atrac3plus @ 0x929f920] Frame data doesn't match channel configuration! Error while decoding stream #0:0: Invalid data found when processing input [atrac3plus @ 0x929f920] GHA amplitude mode 0 is not implemented. Update your FFmpeg version to the newest one from Git. If the problem still occurs, it means that your file has a feature which has not been implemented. Error while decoding stream #0:0: Not yet implemented in FFmpeg, patches welcome [atrac3plus @ 0x929f920] GHA amplitude mode 0 is not implemented. Update your FFmpeg version to the newest one from Git. If the problem still occurs, it means that your file has a feature which has not been implemented. Error while decoding stream #0:0: Not yet implemented in FFmpeg, patches welcome [atrac3plus @ 0x929f920] Frame data doesn't match channel configuration! Error while decoding stream #0:0: Invalid data found when processing input [atrac3plus @ 0x929f920] Invalid gain location: ch=0, sb=0, pos=1, val=0 Error while decoding stream #0:0: Invalid data found when processing input [atrac3plus @ 0x929f920] Frame data doesn't match channel configuration! Error while decoding stream #0:0: Invalid data found when processing input [atrac3plus @ 0x929f920] GHA amplitude mode 0 is not implemented. Update your FFmpeg version to the newest one from Git. If the problem still occurs, it means that your file has a feature which has not been implemented. Error while decoding stream #0:0: Not yet implemented in FFmpeg, patches welcome [atrac3plus @ 0x929f920] Invalid gain location: ch=0, sb=0, pos=1, val=0 Error while decoding stream #0:0: Invalid data found when processing input [atrac3plus @ 0x929f920] Frame data doesn't match channel configuration! Error while decoding stream #0:0: Invalid data found when processing input [atrac3plus @ 0x929f920] Invalid gain location: ch=0, sb=2, pos=2, val=19 Error while decoding stream #0:0: Invalid data found when processing input [atrac3plus @ 0x929f920] Invalid gain location: ch=0, sb=0, pos=1, val=0 Error while decoding stream #0:0: Invalid data found when processing input [atrac3plus @ 0x929f920] Invalid gain location: ch=0, sb=2, pos=1, val=34 Error while decoding stream #0:0: Invalid data found when processing input [atrac3plus @ 0x929f920] Invalid gain location: ch=0, sb=5, pos=1, val=0 Error while decoding stream #0:0: Invalid data found when processing input [atrac3plus @ 0x929f920] Frame data doesn't match channel configuration! Error while decoding stream #0:0: Invalid data found when processing input [atrac3plus @ 0x929f920] Invalid gain location: ch=0, sb=1, pos=1, val=3 Error while decoding stream #0:0: Invalid data found when processing input Last message repeated 1 times [atrac3plus @ 0x929f920] Invalid gain location: ch=0, sb=0, pos=4, val=31 Error while decoding stream #0:0: Invalid data found when processing input [atrac3plus @ 0x929f920] GHA amplitude mode 0 is not implemented. Update your FFmpeg version to the newest one from Git. If the problem still occurs, it means that your file has a feature which has not been implemented. Error while decoding stream #0:0: Not yet implemented in FFmpeg, patches welcome [atrac3plus @ 0x929f920] Frame data doesn't match channel configuration! Error while decoding stream #0:0: Invalid data found when processing input [atrac3plus @ 0x929f920] Invalid gain location: ch=0, sb=5, pos=1, val=0 Error while decoding stream #0:0: Invalid data found when processing input [atrac3plus @ 0x929f920] Invalid gain location: ch=0, sb=4, pos=1, val=36 Error while decoding stream #0:0: Invalid data found when processing input [atrac3plus @ 0x929f920] Invalid gain location: ch=0, sb=0, pos=1, val=0 Error while decoding stream #0:0: Invalid data found when processing input [atrac3plus @ 0x929f920] Invalid number of code table indexes: 31! Error while decoding stream #0:0: Invalid data found when processing input [atrac3plus @ 0x929f920] Invalid gain location: ch=0, sb=0, pos=2, val=31 Error while decoding stream #0:0: Invalid data found when processing input [atrac3plus @ 0x929f920] Invalid gain location: ch=0, sb=1, pos=1, val=0 Error while decoding stream #0:0: Invalid data found when processing input [atrac3plus @ 0x929f920] GHA amplitude mode 0 is not implemented. Update your FFmpeg version to the newest one from Git. If the problem still occurs, it means that your file has a feature which has not been implemented. Error while decoding stream #0:0: Not yet implemented in FFmpeg, patches welcome [atrac3plus @ 0x929f920] Channel unit extension is not implemented. Update your FFmpeg version to the newest one from Git. If the problem still occurs, it means that your file has a feature which has not been implemented. Error while decoding stream #0:0: Not yet implemented in FFmpeg, patches welcome [atrac3plus @ 0x929f920] Invalid gain location: ch=0, sb=1, pos=1, val=0 Error while decoding stream #0:0: Invalid data found when processing input [atrac3plus @ 0x929f920] Frame data doesn't match channel configuration! Error while decoding stream #0:0: Invalid data found when processing input [atrac3plus @ 0x929f920] Invalid gain location: ch=0, sb=0, pos=3, val=31 Error while decoding stream #0:0: Invalid data found when processing input [atrac3plus @ 0x929f920] Frame data doesn't match channel configuration! Error while decoding stream #0:0: Invalid data found when processing input [atrac3plus @ 0x929f920] Channel unit extension is not implemented. Update your FFmpeg version to the newest one from Git. If the problem still occurs, it means that your file has a feature which has not been implemented. Error while decoding stream #0:0: Not yet implemented in FFmpeg, patches welcome [atrac3plus @ 0x929f920] GHA amplitude mode 0 is not implemented. Update your FFmpeg version to the newest one from Git. If the problem still occurs, it means that your file has a feature which has not been implemented. Error while decoding stream #0:0: Not yet implemented in FFmpeg, patches welcome [atrac3plus @ 0x929f920] Invalid gain location: ch=0, sb=1, pos=1, val=0 Error while decoding stream #0:0: Invalid data found when processing input [atrac3plus @ 0x929f920] Frame data doesn't match channel configuration! Error while decoding stream #0:0: Invalid data found when processing input [atrac3plus @ 0x929f920] Frame data doesn't match channel configuration! Error while decoding stream #0:0: Invalid data found when processing input [atrac3plus @ 0x929f920] GHA amplitude mode 0 is not implemented. Update your FFmpeg version to the newest one from Git. If the problem still occurs, it means that your file has a feature which has not been implemented. Error while decoding stream #0:0: Not yet implemented in FFmpeg, patches welcome [atrac3plus @ 0x929f920] Invalid number of code table indexes: 31! Error while decoding stream #0:0: Invalid data found when processing input [atrac3plus @ 0x929f920] Invalid number of code table indexes: 28! Error while decoding stream #0:0: Invalid data found when processing input [atrac3plus @ 0x929f920] GHA amplitude mode 0 is not implemented. Update your FFmpeg version to the newest one from Git. If the problem still occurs, it means that your file has a feature which has not been implemented. Error while decoding stream #0:0: Not yet implemented in FFmpeg, patches welcome [atrac3plus @ 0x929f920] Invalid gain location: ch=0, sb=0, pos=1, val=0 Error while decoding stream #0:0: Invalid data found when processing input [atrac3plus @ 0x929f920] Frame data doesn't match channel configuration! Error while decoding stream #0:0: Invalid data found when processing input [atrac3plus @ 0x929f920] Invalid gain location: ch=0, sb=1, pos=1, val=0 Error while decoding stream #0:0: Invalid data found when processing input [atrac3plus @ 0x929f920] Invalid gain location: ch=0, sb=0, pos=2, val=25 Error while decoding stream #0:0: Invalid data found when processing input [atrac3plus @ 0x929f920] Invalid gain location: ch=0, sb=3, pos=1, val=13 Error while decoding stream #0:0: Invalid data found when processing input [atrac3plus @ 0x929f920] Invalid gain location: ch=0, sb=5, pos=1, val=0 Error while decoding stream #0:0: Invalid data found when processing input [atrac3plus @ 0x929f920] Invalid gain location: ch=0, sb=0, pos=1, val=0 Error while decoding stream #0:0: Invalid data found when processing input Last message repeated 1 times [atrac3plus @ 0x929f920] Channel unit extension is not implemented. Update your FFmpeg version to the newest one from Git. If the problem still occurs, it means that your file has a feature which has not been implemented. Error while decoding stream #0:0: Not yet implemented in FFmpeg, patches welcome [atrac3plus @ 0x929f920] SF mode 1: invalid parameters! Error while decoding stream #0:0: Invalid data found when processing input [atrac3plus @ 0x929f920] Frame data doesn't match channel configuration! Error while decoding stream #0:0: Invalid data found when processing input [atrac3plus @ 0x929f920] GHA amplitude mode 0 is not implemented. Update your FFmpeg version to the newest one from Git. If the problem still occurs, it means that your file has a feature which has not been implemented. Error while decoding stream #0:0: Not yet implemented in FFmpeg, patches welcome [atrac3plus @ 0x929f920] Invalid gain location: ch=0, sb=4, pos=1, val=36 Error while decoding stream #0:0: Invalid data found when processing input [atrac3plus @ 0x929f920] Invalid start bit! Error while decoding stream #0:0: Invalid data found when processing input [atrac3plus @ 0x929f920] GHA amplitude mode 0 is not implemented. Update your FFmpeg version to the newest one from Git. If the problem still occurs, it means that your file has a feature which has not been implemented. Error while decoding stream #0:0: Not yet implemented in FFmpeg, patches welcome [atrac3plus @ 0x929f920] Frame data doesn't match channel configuration! Error while decoding stream #0:0: Invalid data found when processing input [atrac3plus @ 0x929f920] Invalid gain location: ch=0, sb=2, pos=1, val=7 Error while decoding stream #0:0: Invalid data found when processing input [atrac3plus @ 0x929f920] Invalid start bit! Error while decoding stream #0:0: Invalid data found when processing input [atrac3plus @ 0x929f920] Invalid gain location: ch=0, sb=1, pos=3, val=31 Error while decoding stream #0:0: Invalid data found when processing input [atrac3plus @ 0x929f920] SF index out of range: pos=14, val=-7! Error while decoding stream #0:0: Invalid data found when processing input [atrac3plus @ 0x929f920] Invalid gain location: ch=0, sb=0, pos=1, val=0 Error while decoding stream #0:0: Invalid data found when processing input [atrac3plus @ 0x929f920] Frame data doesn't match channel configuration! Error while decoding stream #0:0: Invalid data found when processing input [atrac3plus @ 0x929f920] GHA amplitude mode 0 is not implemented. Update your FFmpeg version to the newest one from Git. If the problem still occurs, it means that your file has a feature which has not been implemented. Error while decoding stream #0:0: Not yet implemented in FFmpeg, patches welcome [atrac3plus @ 0x929f920] Channel unit extension is not implemented. Update your FFmpeg version to the newest one from Git. If the problem still occurs, it means that your file has a feature which has not been implemented. Error while decoding stream #0:0: Not yet implemented in FFmpeg, patches welcome [atrac3plus @ 0x929f920] Invalid gain location: ch=0, sb=0, pos=1, val=0 Error while decoding stream #0:0: Invalid data found when processing input [atrac3plus @ 0x929f920] Frame data doesn't match channel configuration! Error while decoding stream #0:0: Invalid data found when processing input [atrac3plus @ 0x929f920] Too many tones: 53 (max. 48), frame: 128! Error while decoding stream #0:0: Invalid data found when processing input [atrac3plus @ 0x929f920] Channel unit extension is not implemented. Update your FFmpeg version to the newest one from Git. If the problem still occurs, it means that your file has a feature which has not been implemented. Error while decoding stream #0:0: Not yet implemented in FFmpeg, patches welcome [atrac3plus @ 0x929f920] Frame data doesn't match channel configuration! Error while decoding stream #0:0: Invalid data found when processing input [atrac3plus @ 0x929f920] Invalid gain location: ch=0, sb=6, pos=1, val=40 Error while decoding stream #0:0: Invalid data found when processing input [atrac3plus @ 0x929f920] Frame data doesn't match channel configuration! Error while decoding stream #0:0: Invalid data found when processing input [atrac3plus @ 0x929f920] Invalid gain location: ch=0, sb=0, pos=1, val=0 Error while decoding stream #0:0: Invalid data found when processing input [atrac3plus @ 0x929f920] Frame data doesn't match channel configuration! Error while decoding stream #0:0: Invalid data found when processing input [atrac3plus @ 0x929f920] Frame data doesn't match channel configuration! Error while decoding stream #0:0: Invalid data found when processing input [atrac3plus @ 0x929f920] Invalid gain location: ch=0, sb=12, pos=1, val=12 Error while decoding stream #0:0: Invalid data found when processing input [atrac3plus @ 0x929f920] Invalid gain location: ch=0, sb=0, pos=1, val=0 Error while decoding stream #0:0: Invalid data found when processing input Last message repeated 1 times [atrac3plus @ 0x929f920] Frame data doesn't match channel configuration! Error while decoding stream #0:0: Invalid data found when processing input [atrac3plus @ 0x929f920] Frame data doesn't match channel configuration! Error while decoding stream #0:0: Invalid data found when processing input [atrac3plus @ 0x929f920] Invalid gain location: ch=0, sb=0, pos=0, val=34 Error while decoding stream #0:0: Invalid data found when processing input [atrac3plus @ 0x929f920] Invalid gain location: ch=0, sb=0, pos=1, val=0 Error while decoding stream #0:0: Invalid data found when processing input [atrac3plus @ 0x929f920] Channel unit extension is not implemented. Update your FFmpeg version to the newest one from Git. If the problem still occurs, it means that your file has a feature which has not been implemented. Error while decoding stream #0:0: Not yet implemented in FFmpeg, patches welcome [atrac3plus @ 0x929f920] Invalid gain location: ch=0, sb=0, pos=1, val=0 Error while decoding stream #0:0: Invalid data found when processing input [atrac3plus @ 0x929f920] GHA amplitude mode 0 is not implemented. Update your FFmpeg version to the newest one from Git. If the problem still occurs, it means that your file has a feature which has not been implemented. Error while decoding stream #0:0: Not yet implemented in FFmpeg, patches welcome [atrac3plus @ 0x929f920] Invalid gain location: ch=0, sb=0, pos=2, val=35 Error while decoding stream #0:0: Invalid data found when processing input [atrac3plus @ 0x929f920] Invalid gain location: ch=0, sb=1, pos=1, val=0 Error while decoding stream #0:0: Invalid data found when processing input [atrac3plus @ 0x929f920] Too many tones: 59 (max. 48), frame: 173! Error while decoding stream #0:0: Invalid data found when processing input [atrac3plus @ 0x929f920] Invalid gain location: ch=0, sb=0, pos=1, val=0 Error while decoding stream #0:0: Invalid data found when processing input [atrac3plus @ 0x929f920] SF index out of range: pos=5, val=-1! Error while decoding stream #0:0: Invalid data found when processing input Program received signal SIGSEGV, Segmentation fault. 0x0828b30d in waves_synth (synth_param=synth_param@entry=0x92f1878, envelope=envelope@entry=0x92ef508, reg_offset=reg_offset@entry=128, out=out@entry=0xbfffeca0, phase_shift=<error reading variable: Unhandled dwarf expression opcode 0xfa>, waves_info=<error reading variable: Unhandled dwarf expression opcode 0xfa>, waves_info=<error reading variable: Unhandled dwarf expression opcode 0xfa>) at libavcodec/atrac3plusdsp.c:133 133 amp = amp_sf_tab[wave_param->amp_sf] * (gdb) bt #0 0x0828b30d in waves_synth (synth_param=synth_param@entry=0x92f1878, envelope=envelope@entry=0x92ef508, reg_offset=reg_offset@entry=128, out=out@entry=0xbfffeca0, phase_shift=<error reading variable: Unhandled dwarf expression opcode 0xfa>, waves_info=<error reading variable: Unhandled dwarf expression opcode 0xfa>, waves_info=<error reading variable: Unhandled dwarf expression opcode 0xfa>) at libavcodec/atrac3plusdsp.c:133 #1 0x0828b70f in ff_atrac3p_generate_tones (ch_unit=ch_unit@entry=0x92ed840, fdsp=fdsp@entry=0x92b0114, ch_num=ch_num@entry=0, sb=sb@entry=4, out=out@entry=0x92b8940) at libavcodec/atrac3plusdsp.c:217 #2 0x0828aed5 in reconstruct_frame (num_channels=1, ch_unit=0x92ed840, ctx=0x92b0100, avctx=<optimized out>) at libavcodec/atrac3plusdec.c:289 #3 atrac3p_decode_frame (avctx=0x929f920, data=0x92992e0, got_frame_ptr=0xbffff504, avpkt=0xbffff218) at libavcodec/atrac3plusdec.c:358 #4 0x086d7e06 in avcodec_decode_audio4 (avctx=avctx@entry=0x929f920, frame=frame@entry=0x92992e0, got_frame_ptr=got_frame_ptr@entry=0xbffff504, avpkt=avpkt@entry=0xbffff750) at libavcodec/utils.c:2245 #5 0x080c376a in decode_audio (ist=ist@entry=0x929fdc0, pkt=pkt@entry=0xbffff750, got_output=got_output@entry=0xbffff504) at ffmpeg.c:1553 #6 0x080c6b80 in output_packet (pkt=0xbffff6e8, ist=0x929fdc0) at ffmpeg.c:1904 ---Type <return> to continue, or q <return> to quit--- #7 process_input (file_index=1) at ffmpeg.c:3216 #8 0x080aa85b in transcode_step () at ffmpeg.c:3312 #9 transcode () at ffmpeg.c:3364 #10 main (argc=<optimized out>, argv=<optimized out>) at ffmpeg.c:3544 (gdb) }}} -- Ticket URL: <https://trac.ffmpeg.org/ticket/3254> FFmpeg <http://ffmpeg.org> FFmpeg issue tracker

1 6

#2601(undetermined:new): hls output always starts at 1 even so you tell otherwise
by FFmpeg 01 Jan '14

01 Jan '14

#2601: hls output always starts at 1 even so you tell otherwise -------------------------------------+------------------------------------- Reporter: vkroutik | Type: defect Status: new | Priority: important Component: | Version: undetermined | unspecified Keywords: | Blocked By: Blocking: | Reproduced by developer: 0 Analyzed by developer: 0 | -------------------------------------+------------------------------------- Summary of the bug: One of the params is -start_number 1 for running HLS output like this: C:\ffmpeg\ffmpeg.exe -re -i "rtmp://bar/foo.flv" -y -c:v copy -c:a copy -hls_time 6 -hls_list_size 5 -hls_wrap 30 -start_number 1 "C:\Tools\Foo\stream.m3u8" But if your -start_number 100000 It will still start with 1 -- Ticket URL: <https://ffmpeg.org/trac/ffmpeg/ticket/2601> FFmpeg <http://ffmpeg.org> FFmpeg issue tracker

1 8

#2307(FFmpeg:new): Stream segmenter bug if total recorded length > 12 hours
by FFmpeg 01 Jan '14

01 Jan '14

#2307: Stream segmenter bug if total recorded length > 12 hours -------------------------------------+------------------------------------- Reporter: dgillier | Type: defect Status: new | Priority: normal Component: FFmpeg | Version: 1.1.3 Keywords: segment, | Blocked By: duration | Reproduced by developer: 0 Blocking: | Analyzed by developer: 0 | -------------------------------------+------------------------------------- I'm recording UDP streams with transcoding to disk. UDP source are MPEGTS stream with MPEG2 encoding (TV channels). I'm transcoding and recording in H264 using 30 minutes chunks. After the #24 segment is recorded (so after 12 hours of recording) the audio duration info is wrong in the file (look like a signed vs unsigned variable problem). Here is what I'm doing : ffmpeg -i udp://xx.xx.xx.xx:5000 -map 0:0 -map 0:1 -s 640x360 -vcodec libx264 -g 60 -vb 500000 -strict experimental -vf yadif -acodec aac -ab 96000 -ac 2 -y -f segment -segment_format mp4 -segment_time 1800 /mnt/%03dt.mp4 I tried to change the audio codec to libvo_aacenc with the same result. So it seems to be related to the segmenter. Here is a copy of the ffmpeg dump when I inspect the file: Correct files (segment 0 to 24): [root@srv1 ~]# ffmpeg -i /mnt/video/www/2013-01-25/tf1/tf1-024.mp4 ffmpeg version 1.1 Copyright (c) 2000-2013 the FFmpeg developers built on Jan 12 2013 16:56:27 with gcc 4.4.6 (GCC) 20120305 (Red Hat 4.4.6-4) configuration: --enable-gpl --enable-libmp3lame --enable-libtheora --enable-libvo-aacenc --enable-libvorbis --enable-libvpx --enable-libx264 --enable-version3 libavutil 52. 13.100 / 52. 13.100 libavcodec 54. 86.100 / 54. 86.100 libavformat 54. 59.106 / 54. 59.106 libavdevice 54. 3.102 / 54. 3.102 libavfilter 3. 32.100 / 3. 32.100 libswscale 2. 1.103 / 2. 1.103 libswresample 0. 17.102 / 0. 17.102 libpostproc 52. 2.100 / 52. 2.100 [mov,mp4,m4a,3gp,3g2,mj2 @ 0x3156500] Invalid SampleDelta in STTS -2073690672 Input #0, mov,mp4,m4a,3gp,3g2,mj2, from '/mnt/video/www/2013-01-25/tf1/tf1-024.mp4': Metadata: major_brand : isom minor_version : 512 compatible_brands: isomiso2avc1mp41 encoder : Lavf54.59.106 '''Duration: 00:30:00.32''', start: 0.000000, bitrate: 662 kb/s Stream #0:0(und): Video: h264 (High) (avc1 / 0x31637661), yuv420p, 640x360 [SAR 1:1 DAR 16:9], 560 kb/s, 25 fps, 25 tbr, 12800 tbn, 50 tbc Metadata: handler_name : VideoHandler Stream #0:1(und): Audio: aac (mp4a / 0x6134706D), 48000 Hz, stereo, fltp, 96 kb/s Metadata: handler_name : SoundHandler At least one output file must be specified -------------------------------------------------------------------------- Bad files (segment #25 and more) [root@srv1 ~]# ffmpeg -i /mnt/026.mp4 ffmpeg version 1.1 Copyright (c) 2000-2013 the FFmpeg developers built on Jan 12 2013 16:56:27 with gcc 4.4.6 (GCC) 20120305 (Red Hat 4.4.6-4) configuration: --enable-gpl --enable-libmp3lame --enable-libtheora --enable-libvo-aacenc --enable-libvorbis --enable-libvpx --enable-libx264 --enable-version3 libavutil 52. 13.100 / 52. 13.100 libavcodec 54. 86.100 / 54. 86.100 libavformat 54. 59.106 / 54. 59.106 libavdevice 54. 3.102 / 54. 3.102 libavfilter 3. 32.100 / 3. 32.100 libswscale 2. 1.103 / 2. 1.103 libswresample 0. 17.102 / 0. 17.102 libpostproc 52. 2.100 / 52. 2.100 Input #0, mov,mp4,m4a,3gp,3g2,mj2, from '/mnt/video/www/2013-01-25/tf1/tf1-026.mp4': Metadata: major_brand : isom minor_version : 512 compatible_brands: isomiso2avc1mp41 encoder : Lavf54.59.106 ''' Duration: 12:21:15.64,''' start: 0.000000, bitrate: 22 kb/s Stream #0:0(und): Video: h264 (High) (avc1 / 0x31637661), yuv420p, 640x360 [SAR 1:1 DAR 16:9], 455 kb/s, 25 fps, 25 tbr, 12800 tbn, 50 tbc Metadata: handler_name : VideoHandler Stream #0:1(und): Audio: aac (mp4a / 0x6134706D), 48000 Hz, stereo, fltp, 3 kb/s Metadata: handler_name : SoundHandler At least one output file must be specified Any clue on this ? Thanks. Denis -- Ticket URL: <https://ffmpeg.org/trac/ffmpeg/ticket/2307> FFmpeg <http://ffmpeg.org> FFmpeg issue tracker

1 23

#3253(avfilter:new): drawtext filter: problems with text expansions
by FFmpeg 01 Jan '14

01 Jan '14

#3253: drawtext filter: problems with text expansions ----------------------------------+--------------------------------------- Reporter: Krieger | Type: defect Status: new | Priority: normal Component: avfilter | Version: unspecified Keywords: | Blocked By: Blocking: | Reproduced by developer: 0 Analyzed by developer: 0 | ----------------------------------+--------------------------------------- Summary of the bug: Text expansion seem to be not working. How to reproduce: {{{ $ ffmpeg -re -f lavfi -i testsrc -filter:v 'drawtext=text=%{expr:t}:fontfile=/usr/share/fonts/corefonts/verdana.ttf:fontsize=50:fontcolor=red' -y ~/netdisk/tmp/tmp.ts ffmpeg version N-59414-g8a0d446 Copyright (c) 2000-2013 the FFmpeg developers built on Dec 29 2013 16:17:21 with gcc 4.6.3 (Gentoo 4.6.3 p1.13, pie-0.5.2) configuration: --enable-gpl --enable-libx264 --enable-encoder=libx264 --disable-stripping --enable-debug --extra-cflags='-O0 -g -ggdb' --enable- libopus --enable-libvpx --enable-x11grab --enable-libfreetype --enable- filter=drawtext libavutil 52. 59.100 / 52. 59.100 libavcodec 55. 47.100 / 55. 47.100 libavformat 55. 22.100 / 55. 22.100 libavdevice 55. 5.102 / 55. 5.102 libavfilter 4. 0.103 / 4. 0.103 libswscale 2. 5.101 / 2. 5.101 libswresample 0. 17.104 / 0. 17.104 libpostproc 52. 3.100 / 52. 3.100 Input #0, lavfi, from 'testsrc': Duration: N/A, start: 0.000000, bitrate: N/A Stream #0:0: Video: rawvideo (RGB[24] / 0x18424752), rgb24, 320x240 [SAR 1:1 DAR 4:3], 25 tbr, 25 tbn, 25 tbc Output #0, mpegts, to '/home/krieger/netdisk/tmp/tmp.ts': Metadata: encoder : Lavf55.22.100 Stream #0:0: Video: mpeg2video, yuv420p, 320x240 [SAR 1:1 DAR 4:3], q=2-31, 200 kb/s, 90k tbn, 25 tbc Stream mapping: Stream #0:0 -> #0:0 (rawvideo -> mpeg2video) Press [q] to stop, [?] for help frame= 35 fps= 26 q=2.0 Lsize= 75kB time=00:00:01.36 bitrate= 451.2kbits/s video:65kB audio:0kB subtitle:0 global headers:0kB muxing overhead 15.131411% Received signal 2: terminating. }}} The desired effect is printing of timestamp in seconds (see t variable in drawtext doc section). This way we have printed text "t}", which is nonsense. If we swap the order of filter params "text" and "fontfile", it fails to start. Tried both escaping and not escaping semicolon in expansion block. {{{ $ ffmpeg -re -f lavfi -i testsrc -filter:v 'drawtext=fontfile=/usr/share/fonts/corefonts/verdana.ttf:text=%{e: t}:fontsize=50:fontcolor=red' -y ~/netdisk/tmp/tmp.ts ffmpeg version N-59414-g8a0d446 Copyright (c) 2000-2013 the FFmpeg developers built on Dec 29 2013 16:17:21 with gcc 4.6.3 (Gentoo 4.6.3 p1.13, pie-0.5.2) configuration: --enable-gpl --enable-libx264 --enable-encoder=libx264 --disable-stripping --enable-debug --extra-cflags='-O0 -g -ggdb' --enable- libopus --enable-libvpx --enable-x11grab --enable-libfreetype --enable- filter=drawtext libavutil 52. 59.100 / 52. 59.100 libavcodec 55. 47.100 / 55. 47.100 libavformat 55. 22.100 / 55. 22.100 libavdevice 55. 5.102 / 55. 5.102 libavfilter 4. 0.103 / 4. 0.103 libswscale 2. 5.101 / 2. 5.101 libswresample 0. 17.104 / 0. 17.104 libpostproc 52. 3.100 / 52. 3.100 Input #0, lavfi, from 'testsrc': Duration: N/A, start: 0.000000, bitrate: N/A Stream #0:0: Video: rawvideo (RGB[24] / 0x18424752), rgb24, 320x240 [SAR 1:1 DAR 4:3], 25 tbr, 25 tbn, 25 tbc [Parsed_drawtext_0 @ 0x24cd8a0] Could not load font "t}": cannot open resource [AVFilterGraph @ 0x24d47e0] Error initializing filter 'drawtext' with args 'fontfile=/usr/share/fonts/corefonts/verdana.ttf:text=%{e: t}:fontsize=50:fontcolor=red' Error opening filters! [ERR] 16:56:12krieger@zver /usr/local/src/ffmpeg $ ffmpeg -re -f lavfi -i testsrc -filter:v 'drawtext=fontfile=/usr/share/fonts/corefonts/verdana.ttf:text=%{e\: t}:fontsize=50:fontcolor=red' -y ~/netdisk/tmp/tmp.ts ffmpeg version N-59414-g8a0d446 Copyright (c) 2000-2013 the FFmpeg developers built on Dec 29 2013 16:17:21 with gcc 4.6.3 (Gentoo 4.6.3 p1.13, pie-0.5.2) configuration: --enable-gpl --enable-libx264 --enable-encoder=libx264 --disable-stripping --enable-debug --extra-cflags='-O0 -g -ggdb' --enable- libopus --enable-libvpx --enable-x11grab --enable-libfreetype --enable- filter=drawtext libavutil 52. 59.100 / 52. 59.100 libavcodec 55. 47.100 / 55. 47.100 libavformat 55. 22.100 / 55. 22.100 libavdevice 55. 5.102 / 55. 5.102 libavfilter 4. 0.103 / 4. 0.103 libswscale 2. 5.101 / 2. 5.101 libswresample 0. 17.104 / 0. 17.104 libpostproc 52. 3.100 / 52. 3.100 Input #0, lavfi, from 'testsrc': Duration: N/A, start: 0.000000, bitrate: N/A Stream #0:0: Video: rawvideo (RGB[24] / 0x18424752), rgb24, 320x240 [SAR 1:1 DAR 4:3], 25 tbr, 25 tbn, 25 tbc [Parsed_drawtext_0 @ 0x1dc28a0] Could not load font "t}": cannot open resource [AVFilterGraph @ 0x1dc97e0] Error initializing filter 'drawtext' with args 'fontfile=/usr/share/fonts/corefonts/verdana.ttf:text=%{e: t}:fontsize=50:fontcolor=red' Error opening filters! [ERR] }}} -- Ticket URL: <https://trac.ffmpeg.org/ticket/3253> FFmpeg <http://ffmpeg.org> FFmpeg issue tracker

1 9

#2273(FFmpeg:new): no option to set file name format inside the generated m3u8 file
by FFmpeg 01 Jan '14

01 Jan '14

#2273: no option to set file name format inside the generated m3u8 file --------------------------------+--------------------------------------- Reporter: mpapp | Type: defect Status: new | Priority: normal Component: FFmpeg | Version: unspecified Keywords: | Blocked By: Blocking: | Reproduced by developer: 0 Analyzed by developer: 0 | --------------------------------+--------------------------------------- Summary of the bug: How to reproduce: {{{ This is relevant when using segment option in ffmpeg I cannot see such option For vlc, there is an option ,index-url=http://37.188.125.31/demo/medium-########.ts} which specifies in what format the filenames are saved inside the m3u8. I am sorry if I missed it. }}} -- Ticket URL: <https://ffmpeg.org/trac/ffmpeg/ticket/2273> FFmpeg <http://ffmpeg.org> FFmpeg issue tracker

1 6