February 2018 - FFmpeg-trac - lists.ffmpeg.org

#4829(swscale:new): Overflows (?) in xyz -> rgb conversion
by FFmpeg 26 Dec '24

26 Dec '24

#4829: Overflows (?) in xyz -> rgb conversion --------------------------------------+--------------------------------- Reporter: cehoyos | Owner: Type: defect | Status: new Priority: normal | Component: swscale Version: git-master | Keywords: xyz Blocked By: | Blocking: Reproduced by developer: 0 | Analyzed by developer: 0 --------------------------------------+--------------------------------- http://thread.gmane.org/gmane.comp.video.ffmpeg.user/58666 The sample attached to ticket #4827 is in fact decoded fine (at least visually) by the native jpeg 2000 decoder but the colourspace conversion shows posterization artefacts. This is also reproducible with the libopenjpeg decoder. {{{ $ ffmpeg -i frm_000127.j2c out.png ffmpeg version N-74866-g0cdba4a Copyright (c) 2000-2015 the FFmpeg developers built with gcc 4.7 (SUSE Linux) configuration: --enable-gpl libavutil 54. 31.100 / 54. 31.100 libavcodec 56. 60.100 / 56. 60.100 libavformat 56. 40.101 / 56. 40.101 libavdevice 56. 4.100 / 56. 4.100 libavfilter 5. 40.101 / 5. 40.101 libswscale 3. 1.101 / 3. 1.101 libswresample 1. 2.101 / 1. 2.101 libpostproc 53. 3.100 / 53. 3.100 [jpeg2000 @ 0x33bd940] End mismatch 1 Last message repeated 4 times [jpeg2000 @ 0x33bd940] End mismatch 2 Last message repeated 1 times [jpeg2000 @ 0x33bd940] End mismatch 1 Last message repeated 28 times [jpeg2000 @ 0x33bd940] End mismatch 2 [jpeg2000 @ 0x33bd940] End mismatch 1 Last message repeated 19 times Input #0, j2k_pipe, from 'frm_000127.j2c': Duration: N/A, bitrate: N/A Stream #0:0: Video: jpeg2000 (JPEG 2000 digital cinema 2K), xyz12le, 2048x858, 25 tbr, 25 tbn, 25 tbc Output #0, image2, to 'out.png': Metadata: encoder : Lavf56.40.101 Stream #0:0: Video: png, rgb48be, 2048x858, q=2-31, 200 kb/s, 25 fps, 25 tbn, 25 tbc Metadata: encoder : Lavc56.60.100 png Stream mapping: Stream #0:0 -> #0:0 (jpeg2000 (native) -> png (native)) Press [q] to stop, [?] for help [jpeg2000 @ 0x3655fa0] End mismatch 1 Last message repeated 4 times [jpeg2000 @ 0x3655fa0] End mismatch 2 Last message repeated 1 times [jpeg2000 @ 0x3655fa0] End mismatch 1 Last message repeated 28 times [jpeg2000 @ 0x3655fa0] End mismatch 2 [jpeg2000 @ 0x3655fa0] End mismatch 1 Last message repeated 19 times frame= 1 fps=0.8 q=-0.0 Lsize=N/A time=00:00:00.04 bitrate=N/A video:5354kB audio:0kB subtitle:0kB other streams:0kB global headers:0kB muxing overhead: unknown }}} {{{ $ ffmpeg -vcodec libopenjpeg -pix_fmt xyz12le -i frm_000127.j2c out.png ffmpeg version N-74866-g0cdba4a Copyright (c) 2000-2015 the FFmpeg developers built with gcc 4.7 (SUSE Linux) configuration: --enable-gpl --enable-libopenjpeg libavutil 54. 31.100 / 54. 31.100 libavcodec 56. 60.100 / 56. 60.100 libavformat 56. 40.101 / 56. 40.101 libavdevice 56. 4.100 / 56. 4.100 libavfilter 5. 40.101 / 5. 40.101 libswscale 3. 1.101 / 3. 1.101 libswresample 1. 2.101 / 1. 2.101 libpostproc 53. 3.100 / 53. 3.100 Input #0, j2k_pipe, from 'frm_000127.j2c': Duration: N/A, bitrate: N/A Stream #0:0: Video: jpeg2000, xyz12le, 2048x858, 25 tbr, 25 tbn, 25 tbc Output #0, image2, to 'out.png': Metadata: encoder : Lavf56.40.101 Stream #0:0: Video: png, rgb48be, 2048x858, q=2-31, 200 kb/s, 25 fps, 25 tbn, 25 tbc Metadata: encoder : Lavc56.60.100 png Stream mapping: Stream #0:0 -> #0:0 (jpeg2000 (libopenjpeg) -> png (native)) Press [q] to stop, [?] for help frame= 1 fps=0.0 q=-0.0 Lsize=N/A time=00:00:00.04 bitrate=N/A video:5354kB audio:0kB subtitle:0kB other streams:0kB global headers:0kB muxing overhead: unknown }}} I don't know if this ticket is related to ticket #3643. -- Ticket URL: <https://trac.ffmpeg.org/ticket/4829> FFmpeg <https://ffmpeg.org> FFmpeg issue tracker

1 11

#5083(avcodec:new): Conversion from yuv410p to rgb24 looks wrong
by FFmpeg 21 Dec '24

21 Dec '24

#5083: Conversion from yuv410p to rgb24 looks wrong ---------------------------------+-------------------------------------- Reporter: khali | Type: defect Status: new | Priority: normal Component: avcodec | Version: git-master Keywords: | Blocked By: Blocking: | Reproduced by developer: 0 Analyzed by developer: 0 | ---------------------------------+-------------------------------------- Summary of the bug: When generating still pictures from a yuv410p video stream in PNG or BMP format, the output looks incorrect. The same still pictures written as TIFF or JPEG pictures look right. Given that TIFF and JPEG store the data in YUV color space while PNG and BMP use the RGB color space, this makes me suspect that the conversion from yuv410p to rgb24 is broken. How to reproduce: {{{ % ffmpeg -f lavfi -i "color=color=white:size=16x16" -frames:v 1 -vf "format=yuv410p,drawbox=color=red:x=4:y=4:w=8:h=8" -f image2 410p.png ffmpeg version N-77180-g45938f0 Copyright (c) 2000-2015 the FFmpeg developers built with gcc 4.8 (SUSE Linux) configuration: --prefix=/opt/ffmpeg --enable-shared --enable-libmp3lame --enable-libxvid --enable-postproc --enable-gpl --enable-x11grab --enable- avfilter --enable-version3 --enable-libx264 --enable-pthreads --enable- libvorbis --enable-libtheora --enable-fontconfig --cpu=corei7 --enable- libfaac --enable-nonfree libavutil 55. 10.100 / 55. 10.100 libavcodec 57. 17.100 / 57. 17.100 libavformat 57. 19.100 / 57. 19.100 libavdevice 57. 0.100 / 57. 0.100 libavfilter 6. 20.100 / 6. 20.100 libswscale 4. 0.100 / 4. 0.100 libswresample 2. 0.101 / 2. 0.101 libpostproc 54. 0.100 / 54. 0.100 Input #0, lavfi, from 'color=color=white:size=16x16': Duration: N/A, start: 0.000000, bitrate: N/A Stream #0:0: Video: rawvideo (I420 / 0x30323449), yuv420p, 16x16 [SAR 1:1 DAR 1:1], 25 tbr, 25 tbn, 25 tbc Output #0, image2, to '410p.png': Metadata: encoder : Lavf57.19.100 Stream #0:0: Video: png, rgb24, 16x16 [SAR 1:1 DAR 1:1], q=2-31, 200 kb/s, 25 fps, 25 tbn, 25 tbc Metadata: encoder : Lavc57.17.100 png Stream mapping: Stream #0:0 -> #0:0 (rawvideo (native) -> png (native)) Press [q] to stop, [?] for help [swscaler @ 0x1b9f4c0] Warning: data is not aligned! This can lead to a speedloss frame= 1 fps=0.0 q=-0.0 Lsize=N/A time=00:00:00.04 bitrate=N/A video:0kB audio:0kB subtitle:0kB other streams:0kB global headers:0kB muxing overhead: unknown }}} The generated image file does not look good. While the generated pattern is fully symmetric, the output image is not. Same problem with 410p.bmp as the output. However both 410p.jpg and 410p.tiff look right. Also note that format=yuv420p and format=yuv411p both work properly. So this is not a generic problem with the YUV to RGB color space conversion, rather this seems to be specifically related to yuv410p. Converting from yuv410p to yuv420p seems to also be broken, but differently. See how {{{ % ffmpeg -f lavfi -i "color=color=white:size=16x16" -frames:v 1 -vf "format=yuv410p,drawbox=color=red:x=4:y=4:w=8:h=8,format=yuv420p" -f image2 410p_to_420p.tiff }}} manages to create green pixels from a picture that originally only had white and red. -- Ticket URL: <https://trac.ffmpeg.org/ticket/5083> FFmpeg <https://ffmpeg.org> FFmpeg issue tracker

1 6

#4444(swscale:new): Transparency gets lost when scaling pal8
by FFmpeg 16 Dec '24

16 Dec '24

#4444: Transparency gets lost when scaling pal8 --------------------------------------+------------------------------------ Reporter: cehoyos | Owner: Type: defect | Status: new Priority: normal | Component: swscale Version: git-master | Keywords: pal8 alpha Blocked By: | Blocking: Reproduced by developer: 0 | Analyzed by developer: 0 --------------------------------------+------------------------------------ {{{ $ ffmpeg -i alpha.png -s 168x168 out.png ffmpeg version N-71320-gc4b2017 Copyright (c) 2000-2015 the FFmpeg developers built with gcc 4.7 (SUSE Linux) configuration: --enable-gpl libavutil 54. 22.100 / 54. 22.100 libavcodec 56. 34.100 / 56. 34.100 libavformat 56. 29.100 / 56. 29.100 libavdevice 56. 4.100 / 56. 4.100 libavfilter 5. 13.101 / 5. 13.101 libswscale 3. 1.101 / 3. 1.101 libswresample 1. 1.100 / 1. 1.100 libpostproc 53. 3.100 / 53. 3.100 Input #0, png_pipe, from 'alpha.png': Duration: N/A, bitrate: N/A Stream #0:0: Video: png, pal8, 21x21 [SAR 5:6 DAR 5:6], 25 tbr, 25 tbn, 25 tbc Output #0, apng, to 'out.png': Metadata: encoder : Lavf56.29.100 Stream #0:0: Video: apng, pal8, 168x168 [SAR 5:6 DAR 5:6], q=2-31, 200 kb/s, 25 fps, 25 tbn, 25 tbc Metadata: encoder : Lavc56.34.100 apng Stream mapping: Stream #0:0 -> #0:0 (png (native) -> apng (native)) Press [q] to stop, [?] for help [apng @ 0x36fd040] Only a single frame so saving as a normal PNG. frame= 1 fps=0.0 q=0.0 Lsize= 4kB time=00:00:00.04 bitrate= 823.4kbits/s video:3kB audio:0kB subtitle:0kB other streams:0kB global headers:1kB muxing overhead: 24.418253% }}} The output file is opaque. -- Ticket URL: <https://trac.ffmpeg.org/ticket/4444> FFmpeg <https://ffmpeg.org> FFmpeg issue tracker

1 2

#6690(avformat:new): Raw Electronic Arts ADPCM support
by FFmpeg 09 Dec '24

09 Dec '24

#6690: Raw Electronic Arts ADPCM support ----------------------------------+--------------------------------------- Reporter: koops | Type: enhancement Status: new | Priority: normal Component: avformat | Version: unspecified Keywords: | Blocked By: Blocking: | Reproduced by developer: 0 Analyzed by developer: 0 | ----------------------------------+--------------------------------------- Summary of the bug: How to reproduce: {{{ $ ffmpeg -i sound.XA sound.wav sound.XA: Invalid data found when processing input }}} I would like support for headerless Electronic Arts ADPCM files to be added. These files are common in some Electronic Arts games, like Harry Potter and the Chamber of Secrets and Brother Bear. The format is similar to adpcm_ea_r1, but the file is always mono, there is no channels header. ADPCM history is always initialized to [0, 0]. File size is always a multiple of 15, there is no raw sample mode (0xEE). Sample rate is 22050Hz by default. Files can be encoded into this format using sx.exe: {{{ > sx -raw -eaxa_blk sample.wav -=sample.XA }} I attached a test case, a XA file and the corresponding decoded raw file. This is decoder code in C# (I release it under CC0): {{{ using System; using System.IO; using System.Text; namespace KoopsAudioDecoder { class Program { static int coeff1, coeff2, shift, adpcmHistory1 = 0, adpcmHistory2 = 0; static readonly int[] EA_XA_TABLE = new int[] { 0, 0, 240, 0, 460, -208, 392, -220, }; static void DecodeSingleFrame(BinaryReader stream, BinaryWriter outbuf) { int frameInfo = stream.ReadByte(); coeff1 = EA_XA_TABLE[((frameInfo >> 4) & 15) << 1]; coeff2 = EA_XA_TABLE[(((frameInfo >> 4) & 15) << 1) + 1]; shift = (frameInfo & 15) + 8; for (int i = 0; i < 14; i++) { int sample_byte = stream.ReadByte(); int[] nibbles = { sample_byte >> 4, sample_byte & 15 }; foreach (int nibble in nibbles) { int sample = GetSample(nibble); outbuf.Write(Clamp16(sample)); } } } private static int GetSample(int nibble) { int sample = (nibble << 28 >> shift) + (coeff1 * adpcmHistory1) + (coeff2 * adpcmHistory2) >> 8; adpcmHistory2 = adpcmHistory1; adpcmHistory1 = sample; return sample; } static private short Clamp16(int sample) { if (sample > 32767) { return 32767; } else if (sample < -32768) { return -32768; } else { return (short) sample; } } static int Main(string[] args) { if (args.Length != 1) { Console.WriteLine("This program takes only one argument, input file"); return 1; } string inputFileName = args[0], outputFileName = Path.ChangeExtension(inputFileName, "raw"); Stream inputFile = File.OpenRead(inputFileName), outputFile = File.OpenWrite(outputFileName); BinaryReader inputFileReader = new BinaryReader(inputFile); BinaryWriter outputFileWriter = new BinaryWriter(outputFile); while (inputFile.Length - inputFile.Position >= 15) { DecodeSingleFrame(inputFileReader, outputFileWriter); } if (inputFile.Length - inputFile.Position > 0) { Console.WriteLine("File has {0} spare bytes.", inputFile.Length - inputFile.Position); } return 0; } } } }}} -- Ticket URL: <https://trac.ffmpeg.org/ticket/6690> FFmpeg <https://ffmpeg.org> FFmpeg issue tracker

1 16

#6207(avformat:new): Wrong mkv codec ID for ac3 with bitstream_id > 8
by FFmpeg 06 Dec '24

06 Dec '24

#6207: Wrong mkv codec ID for ac3 with bitstream_id > 8 --------------------------------------+---------------------------------- Reporter: cehoyos | Owner: Type: defect | Status: new Priority: normal | Component: avformat Version: git-master | Keywords: mkv ac3 Blocked By: | Blocking: Reproduced by developer: 0 | Analyzed by developer: 0 --------------------------------------+---------------------------------- I will attached two mkv samples with codec ID A_AC3/BSID9 and A_AC3/BSID10 that get an incorrect codec ID A_AC3 when remuxed with FFmpeg. {{{ $ ffmpeg -i ac3bsid9.mkv -acodec copy out.mkv ffmpeg version N-83691-g7f62368 Copyright (c) 2000-2017 the FFmpeg developers built with gcc 4.7 (SUSE Linux) configuration: --enable-gpl libavutil 55. 47.100 / 55. 47.100 libavcodec 57. 81.100 / 57. 81.100 libavformat 57. 66.102 / 57. 66.102 libavdevice 57. 3.100 / 57. 3.100 libavfilter 6. 74.100 / 6. 74.100 libswscale 4. 3.101 / 4. 3.101 libswresample 2. 4.100 / 2. 4.100 libpostproc 54. 2.100 / 54. 2.100 Input #0, matroska,webm, from 'ac3bsid9.mkv': Metadata: encoder : libebml v1.3.4 + libmatroska v1.4.5 creation_time : 2017-02-28T20:08:32.000000Z Duration: 00:00:01.02, start: 0.000000, bitrate: 141 kb/s Stream #0:0: Audio: ac3, 24000 Hz, mono, fltp, 96 kb/s (default) Metadata: BPS : 96000 BPS-eng : 96000 DURATION : 00:00:01.024000705 DURATION-eng : 00:00:01.024000705 NUMBER_OF_FRAMES: 16 NUMBER_OF_FRAMES-eng: 16 NUMBER_OF_BYTES : 12288 NUMBER_OF_BYTES-eng: 12288 _STATISTICS_WRITING_APP: mkvmerge v9.8.0 ('Kuglblids') 64bit _STATISTICS_WRITING_APP-eng: mkvmerge v9.8.0 ('Kuglblids') 64bit _STATISTICS_WRITING_DATE_UTC: 2017-02-28 20:08:32 _STATISTICS_WRITING_DATE_UTC-eng: 2017-02-28 20:08:32 _STATISTICS_TAGS: BPS DURATION NUMBER_OF_FRAMES NUMBER_OF_BYTES _STATISTICS_TAGS-eng: BPS DURATION NUMBER_OF_FRAMES NUMBER_OF_BYTES Output #0, matroska, to 'out.mkv': Metadata: encoder : Lavf57.66.102 Stream #0:0: Audio: ac3 ([0] [0][0] / 0x2000), 24000 Hz, mono, fltp, 96 kb/s (default) Metadata: BPS : 96000 BPS-eng : 96000 DURATION : 00:00:01.024000705 DURATION-eng : 00:00:01.024000705 NUMBER_OF_FRAMES: 16 NUMBER_OF_FRAMES-eng: 16 NUMBER_OF_BYTES : 12288 NUMBER_OF_BYTES-eng: 12288 _STATISTICS_WRITING_APP: mkvmerge v9.8.0 ('Kuglblids') 64bit _STATISTICS_WRITING_APP-eng: mkvmerge v9.8.0 ('Kuglblids') 64bit _STATISTICS_WRITING_DATE_UTC: 2017-02-28 20:08:32 _STATISTICS_WRITING_DATE_UTC-eng: 2017-02-28 20:08:32 _STATISTICS_TAGS: BPS DURATION NUMBER_OF_FRAMES NUMBER_OF_BYTES _STATISTICS_TAGS-eng: BPS DURATION NUMBER_OF_FRAMES NUMBER_OF_BYTES Stream mapping: Stream #0:0 -> #0:0 (copy) Press [q] to stop, [?] for help size= 13kB time=00:00:00.96 bitrate= 114.5kbits/s speed=3.69e+03x video:0kB audio:12kB subtitle:0kB other streams:0kB global headers:0kB muxing overhead: 11.832683% }}} {{{ $ ffmpeg -i ac3bsid10.mkv -acodec copy out.mkv ffmpeg version N-83691-g7f62368 Copyright (c) 2000-2017 the FFmpeg developers built with gcc 4.7 (SUSE Linux) configuration: --enable-gpl libavutil 55. 47.100 / 55. 47.100 libavcodec 57. 81.100 / 57. 81.100 libavformat 57. 66.102 / 57. 66.102 libavdevice 57. 3.100 / 57. 3.100 libavfilter 6. 74.100 / 6. 74.100 libswscale 4. 3.101 / 4. 3.101 libswresample 2. 4.100 / 2. 4.100 libpostproc 54. 2.100 / 54. 2.100 Input #0, matroska,webm, from 'ac3bsid10.mkv': Metadata: encoder : libebml v1.3.4 + libmatroska v1.4.5 creation_time : 2017-02-28T20:08:01.000000Z Duration: 00:00:01.15, start: 0.000000, bitrate: 136 kb/s Stream #0:0: Audio: ac3, 8000 Hz, mono, fltp, 96 kb/s (default) Metadata: BPS : 96083 BPS-eng : 96083 DURATION : 00:00:01.151990784 DURATION-eng : 00:00:01.151990784 NUMBER_OF_FRAMES: 6 NUMBER_OF_FRAMES-eng: 6 NUMBER_OF_BYTES : 13824 NUMBER_OF_BYTES-eng: 13824 _STATISTICS_WRITING_APP: mkvmerge v9.8.0 ('Kuglblids') 64bit _STATISTICS_WRITING_APP-eng: mkvmerge v9.8.0 ('Kuglblids') 64bit _STATISTICS_WRITING_DATE_UTC: 2017-02-28 20:08:01 _STATISTICS_WRITING_DATE_UTC-eng: 2017-02-28 20:08:01 _STATISTICS_TAGS: BPS DURATION NUMBER_OF_FRAMES NUMBER_OF_BYTES _STATISTICS_TAGS-eng: BPS DURATION NUMBER_OF_FRAMES NUMBER_OF_BYTES Output #0, matroska, to 'out.mkv': Metadata: encoder : Lavf57.66.102 Stream #0:0: Audio: ac3 ([0] [0][0] / 0x2000), 8000 Hz, mono, fltp, 96 kb/s (default) Metadata: BPS : 96083 BPS-eng : 96083 DURATION : 00:00:01.151990784 DURATION-eng : 00:00:01.151990784 NUMBER_OF_FRAMES: 6 NUMBER_OF_FRAMES-eng: 6 NUMBER_OF_BYTES : 13824 NUMBER_OF_BYTES-eng: 13824 _STATISTICS_WRITING_APP: mkvmerge v9.8.0 ('Kuglblids') 64bit _STATISTICS_WRITING_APP-eng: mkvmerge v9.8.0 ('Kuglblids') 64bit _STATISTICS_WRITING_DATE_UTC: 2017-02-28 20:08:01 _STATISTICS_WRITING_DATE_UTC-eng: 2017-02-28 20:08:01 _STATISTICS_TAGS: BPS DURATION NUMBER_OF_FRAMES NUMBER_OF_BYTES _STATISTICS_TAGS-eng: BPS DURATION NUMBER_OF_FRAMES NUMBER_OF_BYTES Stream mapping: Stream #0:0 -> #0:0 (copy) Press [q] to stop, [?] for help size= 15kB time=00:00:00.96 bitrate= 126.7kbits/s speed=5.03e+03x video:0kB audio:14kB subtitle:0kB other streams:0kB global headers:0kB muxing overhead: 9.997107% }}} -- Ticket URL: <https://trac.ffmpeg.org/ticket/6207> FFmpeg <https://ffmpeg.org> FFmpeg issue tracker

1 3

#6609(ffmpeg:new): SamplingRateBox should be used if the value is greater than INT16_MAX
by FFmpeg 23 Nov '24

23 Nov '24

#6609: SamplingRateBox should be used if the value is greater than INT16_MAX -------------------------------------+------------------------------------- Reporter: fbeaufort | Type: defect Status: new | Priority: normal Component: ffmpeg | Version: Keywords: flac, | unspecified isobmff, mp4 | Blocked By: Blocking: | Reproduced by developer: 0 Analyzed by developer: 0 | -------------------------------------+------------------------------------- Summary of the bug: SamplingRateBox should be used if the value is greater than INT16_MAX How to reproduce: 1. Grab file from https://storage.googleapis.com/media-session/bear- 1280x720.mp4 2. Run ffmpeg command below {{{ % ffmpeg -i bear-1280x720.mp4 -map 0:0 -acodec flac -strict -2 -ar 192000 bear-flac-192kHz.mp4 }}} 3. The `bear-flac-192kHz.mp4` file should have a valid sample rate, not 0. Here are some #ffmpeg logs for some context: {{{ 12:58:08 PM <jya> you can create a bug that the SamplingRateBox (as per ISO 14496-2 12.2.3.2) is to be used if the value is greater than INT16_MAX 12:59:14 PM <jya> they have provision for that inthe SoundDescription V2, but i can't find this anywhere in the spec 12:59:20 PM <jya> must be a QT thing 1:00:14 PM <jya> and if they properly create a SamplingRateBox, need to file a bug in Firefox that our mp4 demuxer doesn't support it :) }}} And here's the ffmpeg version: {{{ % ffmpeg -version ffmpeg version 3.3.3-static http://johnvansickle.com/ffmpeg/ Copyright (c) 2000-2017 the FFmpeg developers }}} -- Ticket URL: <https://trac.ffmpeg.org/ticket/6609> FFmpeg <https://ffmpeg.org> FFmpeg issue tracker

1 11

#5548(avcodec:new): FFV1 encoder creates invalid stream if width or height is 1 or 2
by FFmpeg 16 Nov '24

16 Nov '24

#5548: FFV1 encoder creates invalid stream if width or height is 1 or 2 ----------------------------------+--------------------------------------- Reporter: Zenitram | Type: defect Status: new | Priority: normal Component: avcodec | Version: unspecified Keywords: FFV1 | Blocked By: Blocking: | Reproduced by developer: 0 Analyzed by developer: 0 | ----------------------------------+--------------------------------------- Summary of the bug: FFV1 encoder creates an invalid stream if width or height is 1 or 2. technical description: is such scenario, num_v_slices has a value of 2 so slice_y should be maximum 1, but slices have slice_y = 2 everywhere (instead of = 0 or 1). How to reproduce: {{{ >ffmpeg -y -f lavfi -i testsrc -t 1 -filter:v scale="353:1" -vcodec ffv1 -level 3 353x1.mkv ffmpeg version N-79630-g9ac154d Copyright (c) 2000-2016 the FFmpeg developers built with gcc 5.3.0 (GCC) configuration: --enable-gpl --enable-version3 --disable-w32threads --enable-avisynth --enable-bzlib --enable-fontconfig --enable-frei0r --enable-gnutls --enable-iconv --enable-libass --enable-libbluray --enable-libbs2b --enable-libcaca --enable-libfreetype --enable-libgme --enable-libgsm --enable-libilbc --enable-libmodplug --enable-libmfx --enable-libmp3lame --enable-libopencore-amrnb --enable-libopencore-amrwb --enable-libopenjpeg --enable-libopus --enable-librtmp --enable- libschroedinger --enable-libsnappy --enable-libsoxr --enable-libspeex --enable-libtheora --enable-libtwolame --enable-libvidstab --enable-libvo- amrwbenc --enable-libvorbis --enable-libvpx --enable-libwavpack --enable- libwebp --enable-libx264 --enable-libx265 --enable-libxavs --enable- libxvid --enable-libzimg --enable-lzma --enable-decklink --enable-zlib libavutil 55. 22.101 / 55. 22.101 libavcodec 57. 38.100 / 57. 38.100 libavformat 57. 34.103 / 57. 34.103 libavdevice 57. 0.101 / 57. 0.101 libavfilter 6. 44.100 / 6. 44.100 libswscale 4. 1.100 / 4. 1.100 libswresample 2. 0.101 / 2. 0.101 libpostproc 54. 0.100 / 54. 0.100 Input #0, lavfi, from 'testsrc': Duration: N/A, start: 0.000000, bitrate: N/A Stream #0:0: Video: rawvideo (RGB[24] / 0x18424752), rgb24, 320x240 [SAR 1:1 DAR 4:3], 25 fps, 25 tbr, 25 tbn [matroska @ 0000000000f8e8e0] Using AVStream.codec to pass codec parameters to muxers is deprecated, use AVStream.codecpar instead. Output #0, matroska, to '353x1.mkv': Metadata: encoder : Lavf57.34.103 Stream #0:0: Video: ffv1 (FFV1 / 0x31564646), bgr0, 353x1 [SAR 4:1059 DAR 4:3], q=2-31, 200 kb/s, 25 fps, 1k tbn Metadata: encoder : Lavc57.38.100 ffv1 Stream mapping: Stream #0:0 -> #0:0 (rawvideo (native) -> ffv1 (native)) Press [q] to stop, [?] for help frame= 25 fps=0.0 q=-0.0 Lsize= 15kB time=00:00:00.96 bitrate= 130.4kbits/s speed=44.7x video:14kB audio:0kB subtitle:0kB other streams:0kB global headers:0kB muxing overhead: 7.009154% >ffmpeg -i 353x1.mkv fake.mp4 ffmpeg version N-79630-g9ac154d Copyright (c) 2000-2016 the FFmpeg developers built with gcc 5.3.0 (GCC) configuration: --enable-gpl --enable-version3 --disable-w32threads --enable-avisynth --enable-bzlib --enable-fontconfig --enable-frei0r --enable-gnutls --enable-iconv --enable-libass --enable-libbluray --enable-libbs2b --enable-libcaca --enable-libfreetype --enable-libgme --enable-libgsm --enable-libilbc --enable-libmodplug --enable-libmfx --enable-libmp3lame --enable-libopencore-amrnb --enable-libopencore-amrwb --enable-libopenjpeg --enable-libopus --enable-librtmp --enable- libschroedinger --enable-libsnappy --enable-libsoxr --enable-libspeex --enable-libtheora --enable-libtwolame --enable-libvidstab --enable-libvo- amrwbenc --enable-libvorbis --enable-libvpx --enable-libwavpack --enable- libwebp --enable-libx264 --enable-libx265 --enable-libxavs --enable- libxvid --enable-libzimg --enable-lzma --enable-decklink --enable-zlib libavutil 55. 22.101 / 55. 22.101 libavcodec 57. 38.100 / 57. 38.100 libavformat 57. 34.103 / 57. 34.103 libavdevice 57. 0.101 / 57. 0.101 libavfilter 6. 44.100 / 6. 44.100 libswscale 4. 1.100 / 4. 1.100 libswresample 2. 0.101 / 2. 0.101 libpostproc 54. 0.100 / 54. 0.100 [ffv1 @ 00000000025245e0] slice count invalid [matroska,webm @ 00000000001d6e60] Failed to open codec in av_find_stream_info [ffv1 @ 00000000025245e0] slice count invalid Input #0, matroska,webm, from '353x1.mkv': Metadata: ENCODER : Lavf57.34.103 Duration: 00:00:01.00, start: 0.000000, bitrate: 125 kb/s Stream #0:0: Video: ffv1 (FFV1 / 0x31564646), none, 353x1, SAR 1:255 DAR 353:255, 25 fps, 25 tbr, 1k tbn (default) Metadata: ENCODER : Lavc57.38.100 ffv1 DURATION : 00:00:01.000000000 [buffer @ 00000000025179e0] Unable to parse option value "-1" as pixel format Last message repeated 1 times [buffer @ 00000000025179e0] Error setting option pix_fmt to value -1. [graph 0 input from stream 0:0 @ 0000000002517500] Error applying options to the filter. Error opening filters! }}} Same if you invert width and height. -- Ticket URL: <https://trac.ffmpeg.org/ticket/5548> FFmpeg <https://ffmpeg.org> FFmpeg issue tracker

1 3

#6521(avformat:new): HEIF support
by FFmpeg 15 Nov '24

15 Nov '24

#6521: HEIF support -------------------------------------+------------------------------------- Reporter: mateo | Owner: mateo Type: | Status: new enhancement | Component: avformat Priority: normal | Keywords: mov isom Version: | heif unspecified | Blocking: Blocked By: | Analyzed by developer: 0 Reproduced by developer: 0 | -------------------------------------+------------------------------------- With the upcoming iOS 11 release, Apple will use the HEIF format instead of the JPEG one as its default photo format. I've started working on adding this support to lavf/mov. I open this ticket to track my progress (and will update it accordingly). -- Ticket URL: <https://trac.ffmpeg.org/ticket/6521> FFmpeg <https://ffmpeg.org> FFmpeg issue tracker

1 24

#5582(undetermined:new): vp5: support decoding of interlaced video
by FFmpeg 01 Nov '24

01 Nov '24

#5582: vp5: support decoding of interlaced video -------------------------------------+------------------------------------- Reporter: ami_stuff | Owner: Type: defect | Status: new Priority: normal | Component: Version: | undetermined unspecified | Keywords: Blocked By: | Blocking: Reproduced by developer: 0 | Analyzed by developer: 0 -------------------------------------+------------------------------------- http://samples.mplayerhq.hu/V-codecs/VP5/vp5_interlace.avi https://lists.ffmpeg.org/pipermail/ffmpeg-devel/2007-November/037060.html {{{ C:\>ffmpegx -i D:\vp5_interlace.avi out.avi ffmpeg version N-80043-g1499242 Copyright (c) 2000-2016 the FFmpeg developers built with gcc 4.5.0 (GCC) 20100414 (Fedora MinGW 4.5.0-1.fc14) configuration: --prefix=/var/www/users/research/ffmpeg/snapshots/build --arch= x86 --target-os=mingw32 --cross-prefix=i686-pc-mingw32- --cc='ccache i686 -pc-min gw32-gcc' --enable-pthreads --enable-memalign-hack --enable-runtime- cpudetect -- enable-cross-compile --enable-static --disable-shared --extra- libs='-lws2_32 -lw inmm -lpthread' --extra-cflags='--static -I/var/www/users/research/ffmpeg/snapsh ots/build/include' --extra-ldflags='-static -L/var/www/users/research/ffmpeg/sna pshots/build/lib' --enable-bzlib --enable-zlib --enable-gpl --enable- version3 -- enable-nonfree --enable-libx264 --enable-libspeex --enable-libtheora --enable-li bvorbis --enable-libfaac --enable-libxvid --enable-libopencore-amrnb --enable-li bopencore-amrwb --enable-libmp3lame --enable-libfreetype --enable-libvpx --disab le-decoder=libvpx libavutil 55. 24.100 / 55. 24.100 libavcodec 57. 42.100 / 57. 42.100 libavformat 57. 36.100 / 57. 36.100 libavdevice 57. 0.101 / 57. 0.101 libavfilter 6. 46.100 / 6. 46.100 libswscale 4. 1.100 / 4. 1.100 libswresample 2. 0.101 / 2. 0.101 libpostproc 54. 0.100 / 54. 0.100 Input #0, avi, from 'D:\vp5_interlace.avi': Duration: 00:01:35.80, start: 0.000000, bitrate: 1995 kb/s Stream #0:0: Video: vp5 (VP50 / 0x30355056), yuv420p, 352x576, 1857 kb/s, 25 fps, 25 tbr, 25 tbn Stream #0:1: Audio: mp3 (U[0][0][0] / 0x0055), 48000 Hz, stereo, s16p, 128 k b/s File 'out.avi' already exists. Overwrite ? [y/N] y [avi @ 0x28c5400] Using AVStream.codec to pass codec parameters to muxers is dep recated, use AVStream.codecpar instead. Last message repeated 1 times Output #0, avi, to 'out.avi': Metadata: ISFT : Lavf57.36.100 Stream #0:0: Video: mpeg4 (FMP4 / 0x34504D46), yuv420p, 352x576, q=2-31, 200 kb/s, 25 fps, 25 tbn Metadata: encoder : Lavc57.42.100 mpeg4 Side data: cpb: bitrate max/min/avg: 0/0/200000 buffer size: 0 vbv_delay: -1 Stream #0:1: Audio: mp3 (U[0][0][0] / 0x0055), 48000 Hz, stereo, s16p Metadata: encoder : Lavc57.42.100 libmp3lame Stream mapping: Stream #0:0 -> #0:0 (vp5 (native) -> mpeg4 (native)) Stream #0:1 -> #0:1 (mp3 (native) -> mp3 (libmp3lame)) Press [q] to stop, [?] for help [vp5 @ 0x28c5de0] interlacing not supported Error while decoding stream #0:0: Not yet implemented in FFmpeg, patches welcome Error while decoding stream #0:0: Invalid data found when processing input Last message repeated 7 times [vp5 @ 0x28c5de0] interlacing not supported Error while decoding stream #0:0: Not yet implemented in FFmpeg, patches welcome Error while decoding stream #0:0: Invalid data found when processing input Last message repeated 7 times [vp5 @ 0x28c5de0] interlacing not supported Error while decoding stream #0:0: Not yet implemented in FFmpeg, patches welcome Error while decoding stream #0:0: Invalid data found when processing input Last message repeated 7 times [vp5 @ 0x28c5de0] interlacing not supported Error while decoding stream #0:0: Not yet implemented in FFmpeg, patches welcome Error while decoding stream #0:0: Invalid data found when processing input Last message repeated 10 times [vp5 @ 0x28c5de0] interlacing not supported Error while decoding stream #0:0: Not yet implemented in FFmpeg, patches welcome Error while decoding stream #0:0: Invalid data found when processing input Last message repeated 8 times [vp5 @ 0x28c5de0] interlacing not supported Error while decoding stream #0:0: Not yet implemented in FFmpeg, patches welcome Error while decoding stream #0:0: Invalid data found when processing input Last message repeated 10 times [vp5 @ 0x28c5de0] interlacing not supported Error while decoding stream #0:0: Not yet implemented in FFmpeg, patches welcome Error while decoding stream #0:0: Invalid data found when processing input Last message repeated 8 times [vp5 @ 0x28c5de0] interlacing not supported Error while decoding stream #0:0: Not yet implemented in FFmpeg, patches welcome Error while decoding stream #0:0: Invalid data found when processing input Last message repeated 27 times [vp5 @ 0x28c5de0] interlacing not supported Error while decoding stream #0:0: Not yet implemented in FFmpeg, patches welcome Error while decoding stream #0:0: Invalid data found when processing input Last message repeated 27 times [vp5 @ 0x28c5de0] interlacing not supported Error while decoding stream #0:0: Not yet implemented in FFmpeg, patches welcome Error while decoding stream #0:0: Invalid data found when processing input Last message repeated 53 times frame= 0 fps=0.0 q=0.0 Lsize= 139kB time=00:00:07.75 bitrate= 146.7kbits/ s speed=20.7x video:0kB audio:122kB subtitle:0kB other streams:0kB global headers:0kB muxing o verhead: 14.229681% Exiting normally, received signal 2. }}} -- Ticket URL: <https://trac.ffmpeg.org/ticket/5582> FFmpeg <https://ffmpeg.org> FFmpeg issue tracker

1 2

#5581(undetermined:new): vp6: support decoding of interlaced video
by FFmpeg 01 Nov '24

01 Nov '24

#5581: vp6: support decoding of interlaced video -------------------------------------+------------------------------------- Reporter: ami_stuff | Owner: Type: defect | Status: new Priority: normal | Component: Version: | undetermined unspecified | Keywords: Blocked By: | Blocking: Reproduced by developer: 0 | Analyzed by developer: 0 -------------------------------------+------------------------------------- another sample is here: https://trac.videolan.org/vlc/ticket/3338 {{{ C:\>ffmpeg -i C:\vp6_interlaced.avi out.avi ffmpeg version N-80043-g1499242 Copyright (c) 2000-2016 the FFmpeg developers built with gcc 4.5.0 (GCC) 20100414 (Fedora MinGW 4.5.0-1.fc14) configuration: --prefix=/var/www/users/research/ffmpeg/snapshots/build --arch= x86 --target-os=mingw32 --cross-prefix=i686-pc-mingw32- --cc='ccache i686 -pc-min gw32-gcc' --enable-pthreads --enable-memalign-hack --enable-runtime- cpudetect -- enable-cross-compile --enable-static --disable-shared --extra- libs='-lws2_32 -lw inmm -lpthread' --extra-cflags='--static -I/var/www/users/research/ffmpeg/snapsh ots/build/include' --extra-ldflags='-static -L/var/www/users/research/ffmpeg/sna pshots/build/lib' --enable-bzlib --enable-zlib --enable-gpl --enable- version3 -- enable-nonfree --enable-libx264 --enable-libspeex --enable-libtheora --enable-li bvorbis --enable-libfaac --enable-libxvid --enable-libopencore-amrnb --enable-li bopencore-amrwb --enable-libmp3lame --enable-libfreetype --enable-libvpx --disab le-decoder=libvpx libavutil 55. 24.100 / 55. 24.100 libavcodec 57. 42.100 / 57. 42.100 libavformat 57. 36.100 / 57. 36.100 libavdevice 57. 0.101 / 57. 0.101 libavfilter 6. 46.100 / 6. 46.100 libswscale 4. 1.100 / 4. 1.100 libswresample 2. 0.101 / 2. 0.101 libpostproc 54. 0.100 / 54. 0.100 Input #0, avi, from 'C:\vp6_interlaced.avi': Duration: 00:00:12.64, start: 0.000000, bitrate: 1572 kb/s Stream #0:0: Video: vp6 (VP60 / 0x30365056), yuv420p, 320x240, 1567 kb/s, 23 .97 fps, 23.97 tbr, 23.97 tbn File 'out.avi' already exists. Overwrite ? [y/N] y [avi @ 0x28c52e0] Using AVStream.codec to pass codec parameters to muxers is dep recated, use AVStream.codecpar instead. Output #0, avi, to 'out.avi': Metadata: ISFT : Lavf57.36.100 Stream #0:0: Video: mpeg4 (FMP4 / 0x34504D46), yuv420p, 320x240, q=2-31, 200 kb/s, 23.97 fps, 23.97 tbn Metadata: encoder : Lavc57.42.100 mpeg4 Side data: cpb: bitrate max/min/avg: 0/0/200000 buffer size: 0 vbv_delay: -1 Stream mapping: Stream #0:0 -> #0:0 (vp6 (native) -> mpeg4 (native)) Press [q] to stop, [?] for help [vp6 @ 0x28c4ee0] Interlacing is not implemented. Update your FFmpeg version to the newest one from Git. If the problem still occurs, it means that your file ha s a feature which has not been implemented. Error while decoding stream #0:0: Not yet implemented in FFmpeg, patches welcome Error while decoding stream #0:0: Invalid data found when processing input Last message repeated 118 times [vp6 @ 0x28c4ee0] Interlacing is not implemented. Update your FFmpeg version to the newest one from Git. If the problem still occurs, it means that your file ha s a feature which has not been implemented. Error while decoding stream #0:0: Not yet implemented in FFmpeg, patches welcome Error while decoding stream #0:0: Invalid data found when processing input Last message repeated 118 times [vp6 @ 0x28c4ee0] Interlacing is not implemented. Update your FFmpeg version to the newest one from Git. If the problem still occurs, it means that your file ha s a feature which has not been implemented. Error while decoding stream #0:0: Not yet implemented in FFmpeg, patches welcome Error while decoding stream #0:0: Invalid data found when processing input Last message repeated 41 times [vp6 @ 0x28c4ee0] Interlacing is not implemented. Update your FFmpeg version to the newest one from Git. If the problem still occurs, it means that your file ha s a feature which has not been implemented. Error while decoding stream #0:0: Not yet implemented in FFmpeg, patches welcome Error while decoding stream #0:0: Invalid data found when processing input Last message repeated 18 times frame= 0 fps=0.0 q=0.0 Lsize= 6kB time=00:00:00.00 bitrate=N/A speed= 0x video:0kB audio:0kB subtitle:0kB other streams:0kB global headers:0kB muxing ove rhead: unknown Output file is empty, nothing was encoded (check -ss / -t / -frames parameters i f used) Conversion failed! }}} -- Ticket URL: <https://trac.ffmpeg.org/ticket/5581> FFmpeg <https://ffmpeg.org> FFmpeg issue tracker

1 5