November 2023 - FFmpeg-trac - lists.ffmpeg.org

#8871(swscale:new): swsscale crops image on yuv2rgb
by FFmpeg 17 Dec '24

17 Dec '24

#8871: swsscale crops image on yuv2rgb ---------------------------------+--------------------------------------- Reporter: xlp | Type: defect Status: new | Priority: normal Component: swscale | Version: unspecified Keywords: | Blocked By: Blocking: | Reproduced by developer: 0 Analyzed by developer: 0 | ---------------------------------+--------------------------------------- Summary of the bug: swscale leaves a small right portion of the image out on yuv2rgb conversion. aka "crops it", so a bar of the destination-image on right side stays unwritten. this seems to effect only certain resolutions/linesizes - below is one given that seems to cause issues How to reproduce: {{{ // HAS NO ISSUES // int32_t width = 1600; // int32_t height = 900; // int srcLinesize[8] = {1664, 832, 832, 0, 0, 0, 0, 0}; // HAS ISSUES int32_t width = 1220; int32_t height = 1200; int srcLinesize[8] = {1280, 640, 640, 0, 0, 0, 0, 0}; struct SwsContext* sws_scaler_ctx = sws_getContext(width, height, AV_PIX_FMT_YUV420P, width, height, AV_PIX_FMT_RGB0, SWS_FAST_BILINEAR, 0, 0, 0); size_t destBufferSize = width * 4 * height; uint8_t* destBuffer = (uint8_t*) malloc(destBufferSize); memset(destBuffer, 0x00, destBufferSize); uint8_t* destLines[4] = {destBuffer, 0, 0, 0}; int destData[4] = {width * 4, 0, 0, 0}; // Make a dummy source with green footage uint8_t* srcData[8]; for (int i = 0; i < 8; i++) { if (srcLinesize[i] > 0) { size_t srcBufferSize = srcLinesize[i]*height; srcData[i] = (uint8_t*) malloc(srcBufferSize); memset(srcData[i], 0x00, srcBufferSize); } else { srcData[i] = 0x00; } } sws_scale(sws_scaler_ctx, (const uint8_t* const*)srcData, srcLinesize, 0, height, destLines, destData); }}} Produced Result: Green area with unwritten gap at the right side (here in the size of 4x1200) Expected result: Completely green area, as the provided YUV source contains -- Ticket URL: <https://trac.ffmpeg.org/ticket/8871> FFmpeg <https://ffmpeg.org> FFmpeg issue tracker

1 4

#4444(swscale:new): Transparency gets lost when scaling pal8
by FFmpeg 16 Dec '24

16 Dec '24

#4444: Transparency gets lost when scaling pal8 --------------------------------------+------------------------------------ Reporter: cehoyos | Owner: Type: defect | Status: new Priority: normal | Component: swscale Version: git-master | Keywords: pal8 alpha Blocked By: | Blocking: Reproduced by developer: 0 | Analyzed by developer: 0 --------------------------------------+------------------------------------ {{{ $ ffmpeg -i alpha.png -s 168x168 out.png ffmpeg version N-71320-gc4b2017 Copyright (c) 2000-2015 the FFmpeg developers built with gcc 4.7 (SUSE Linux) configuration: --enable-gpl libavutil 54. 22.100 / 54. 22.100 libavcodec 56. 34.100 / 56. 34.100 libavformat 56. 29.100 / 56. 29.100 libavdevice 56. 4.100 / 56. 4.100 libavfilter 5. 13.101 / 5. 13.101 libswscale 3. 1.101 / 3. 1.101 libswresample 1. 1.100 / 1. 1.100 libpostproc 53. 3.100 / 53. 3.100 Input #0, png_pipe, from 'alpha.png': Duration: N/A, bitrate: N/A Stream #0:0: Video: png, pal8, 21x21 [SAR 5:6 DAR 5:6], 25 tbr, 25 tbn, 25 tbc Output #0, apng, to 'out.png': Metadata: encoder : Lavf56.29.100 Stream #0:0: Video: apng, pal8, 168x168 [SAR 5:6 DAR 5:6], q=2-31, 200 kb/s, 25 fps, 25 tbn, 25 tbc Metadata: encoder : Lavc56.34.100 apng Stream mapping: Stream #0:0 -> #0:0 (png (native) -> apng (native)) Press [q] to stop, [?] for help [apng @ 0x36fd040] Only a single frame so saving as a normal PNG. frame= 1 fps=0.0 q=0.0 Lsize= 4kB time=00:00:00.04 bitrate= 823.4kbits/s video:3kB audio:0kB subtitle:0kB other streams:0kB global headers:1kB muxing overhead: 24.418253% }}} The output file is opaque. -- Ticket URL: <https://trac.ffmpeg.org/ticket/4444> FFmpeg <https://ffmpeg.org> FFmpeg issue tracker

1 2

#8496(swscale:new): Conditional jump or move depends on uninitialised value with small input
by FFmpeg 16 Dec '24

16 Dec '24

#8496: Conditional jump or move depends on uninitialised value with small input --------------------------------------+--------------------------------- Reporter: ubitux | Owner: Type: defect | Status: new Priority: important | Component: swscale Version: git-master | Keywords: Blocked By: | Blocking: Reproduced by developer: 0 | Analyzed by developer: 0 --------------------------------------+--------------------------------- {{{ ☭ valgrind ./ffmpeg_g -f lavfi -i color=white:s=2x2,format=rgba,scale=10x10 -frames:v 1 -f null - ==95117== Memcheck, a memory error detector ==95117== Copyright (C) 2002-2017, and GNU GPL'd, by Julian Seward et al. ==95117== Using Valgrind-3.15.0 and LibVEX; rerun with -h for copyright info ==95117== Command: ./ffmpeg_g -f lavfi -i color=white:s=2x2,format=rgba,scale=10x10 -frames:v 1 -f null - ==95117== ffmpeg version N-96482-ge931119a41 Copyright (c) 2000-2020 the FFmpeg developers built with gcc 9.2.0 (GCC) configuration: --cc=/usr/bin/gcc libavutil 56. 38.100 / 56. 38.100 libavcodec 58. 66.100 / 58. 66.100 libavformat 58. 35.104 / 58. 35.104 libavdevice 58. 9.103 / 58. 9.103 libavfilter 7. 71.100 / 7. 71.100 libswscale 5. 6.100 / 5. 6.100 libswresample 3. 6.100 / 3. 6.100 ==95117== Conditional jump or move depends on uninitialised value(s) ==95117== at 0xF25462: yuv2rgb_full_1_c_template (output.c:2102) ==95117== by 0xF25462: yuv2rgba32_full_1_c (output.c:2142) ==95117== by 0xF05B31: packed_vscale (vscale.c:134) ==95117== by 0xF01D20: swscale (swscale.c:503) ==95117== by 0xF02D5C: sws_scale (swscale.c:978) ==95117== by 0x3A5496: scale_slice.isra.0 (vf_scale.c:647) ==95117== by 0x3A5C76: scale_frame (vf_scale.c:809) ==95117== by 0x3A5D77: filter_frame (vf_scale.c:823) ==95117== by 0x2C85FC: ff_filter_frame_framed (avfilter.c:1066) ==95117== by 0x2C85FC: ff_filter_frame_to_filter (avfilter.c:1214) ==95117== by 0x2C85FC: ff_filter_activate_default (avfilter.c:1263) ==95117== by 0x2C85FC: ff_filter_activate (avfilter.c:1425) ==95117== by 0x2CBC1C: get_frame_internal (buffersink.c:108) ==95117== by 0x2A6917: lavfi_read_packet (lavfi.c:412) ==95117== by 0x5AEB2E: ff_read_packet (utils.c:857) ==95117== by 0x5AF4AA: read_frame_internal (utils.c:1588) ==95117== Input #0, lavfi, from 'color=white:s=2x2,format=rgba,scale=10x10': Duration: N/A, start: 0.000000, bitrate: N/A Stream #0:0: Video: rawvideo (RGBA / 0x41424752), rgba, 10x10 [SAR 1:1 DAR 1:1], 25 tbr, 25 tbn, 25 tbc Stream mapping: Stream #0:0 -> #0:0 (rawvideo (native) -> wrapped_avframe (native)) Press [q] to stop, [?] for help Output #0, null, to 'pipe:': Metadata: encoder : Lavf58.35.104 Stream #0:0: Video: wrapped_avframe, rgba, 10x10 [SAR 1:1 DAR 1:1], q=2-31, 200 kb/s, 25 fps, 25 tbn, 25 tbc Metadata: encoder : Lavc58.66.100 wrapped_avframe frame= 1 fps=0.0 q=-0.0 Lsize=N/A time=00:00:00.04 bitrate=N/A speed=0.113x video:1kB audio:0kB subtitle:0kB other streams:0kB global headers:0kB muxing overhead: unknown ==95117== ==95117== HEAP SUMMARY: ==95117== in use at exit: 0 bytes in 0 blocks ==95117== total heap usage: 2,725 allocs, 2,725 frees, 926,979 bytes allocated ==95117== ==95117== All heap blocks were freed -- no leaks are possible ==95117== ==95117== Use --track-origins=yes to see where uninitialised values come from ==95117== For lists of detected and suppressed errors, rerun with: -s ==95117== ERROR SUMMARY: 100 errors from 1 contexts (suppressed: 0 from 0) }}} -- Ticket URL: <https://trac.ffmpeg.org/ticket/8496> FFmpeg <https://ffmpeg.org> FFmpeg issue tracker

1 1

#10140(undetermined:new): swscale crash in Android starting from API31
by FFmpeg 16 Dec '24

16 Dec '24

#10140: swscale crash in Android starting from API31 -------------------------------------+------------------------------------- Reporter: fabienst | Type: defect Status: new | Priority: normal Component: | Version: undetermined | unspecified Keywords: swscale | Blocked By: Blocking: | Reproduced by developer: 0 Analyzed by developer: 0 | -------------------------------------+------------------------------------- I have a crash in my call to sw_scale since Android API 31. I doesn't crash for all inputs, but for now only on the same given picture. It works fine with API 30. I'm calling sw_scale from a native function through JNI which is calling from java. The input picture is a "Bitmap" object. The problem still exists in the present snapshot of ffmpeg (2023-01-15). BTW, this LDFLAGS is missing to build for Android: {{{-lnativewindow}}} If I run the same command from ffmpeg but with directly the file as input, I don't have a crash, but the input is then a jpeg, while programatically it's a bitmap object. {{{ LD_LIBRARY_PATH=. ./ffmpeg -i /storage/emulated/0/DCIM/test_pics/invalid/image01088.jpg -vf scale=160x45 -sws_flags print_info -sws_flags lanczos -loglevel trace a.jpg }}} I enabled logging in my program as much as I could. You will find attached the log for the run on a device running android 11 (=API30) and the log for the run on a device with Android 12 (API31). These were made within the Android emulator. Crash is reported as: {{{ A/libc: Fatal signal 11 (SIGSEGV), code 2 (SEGV_ACCERR), fault addr 0x7e936e915000 in tid 9755 (ServiceStartArg), pid 9722 (adder.app.debug) }}} Crash is at this line inside swscale() function: {{{ desc[i].process(c, &desc[i], firstCPosY, lastCPosY - firstCPosY + 1); }}} I would like to provide the input picture but I don't know how to make a file out of this bitmap object. However, I attached the jpeg just in case. I also attached the material that the android emulator collects to produce bug reports. The java code: Algo is LANCZOS, but it fails also with others IIRC {{{ public static Bitmap rescale(Bitmap src, int dstWidth, int dstHeight, AlgoParametrized1 algo, double p0) { int final_algo = algo.flag; if (MainApplication.enableLog) final_algo |= Algo.SWS_PRINT_INFO.flag; return native_rescale(src, Bitmap.createBitmap(dstWidth, dstHeight, src.getConfig()), final_algo | Algo.SWS_PRINT_INFO.flag, p0, 0.0); } }}} The C code: {{{ /* SPDX-License-Identifier: (BSD-2-Clause or GPL-2.0-only) */ // Adapted for Exif Thumbnail Adder // From: https://raw.githubusercontent.com/ser- gik/smoothrescale/master/smoothrescale/src/main/jni/on_load.c #include <stddef.h> #include <stdint.h> #include <jni.h> #include <android/log.h> #include <android/bitmap.h> #include <libswscale/swscale.h> #include <libavutil/pixfmt.h> #include <libavutil/log.h> #define LOGI(...) __android_log_print(ANDROID_LOG_INFO, "schokoladenbrown", __VA_ARGS__) struct bitmap { jobject jbitmap; AndroidBitmapInfo info; uint8_t *buffer; }; static int lock_bitmap(JNIEnv *env, struct bitmap *bm) { int res = AndroidBitmap_getInfo(env, bm->jbitmap, &bm->info); if(ANDROID_BITMAP_RESULT_SUCCESS != res) return res; else return AndroidBitmap_lockPixels(env, bm->jbitmap, (void **)&bm->buffer); } static int unlock_bitmap(JNIEnv *env, struct bitmap *bm) { const static struct bitmap null_bm; int res = AndroidBitmap_unlockPixels(env, bm->jbitmap); *bm = null_bm; return res; } static inline enum AVPixelFormat pix_fmt(enum AndroidBitmapFormat fmt) { /* bitmap formats directly correspond to SkColorType values */ switch (fmt) { case ANDROID_BITMAP_FORMAT_RGBA_8888: /* * kN32_SkColorType * Actually it may be one of kBGRA_8888_SkColorType or kRGBA_8888_SkColorType * and may be configured at build time. Seems like Android uses RGBA order. */ return AV_PIX_FMT_RGBA;; case ANDROID_BITMAP_FORMAT_RGB_565: /* * kRGB_565_SkColorType * This one is packed in native endianness */ return AV_PIX_FMT_RGB565; case ANDROID_BITMAP_FORMAT_A_8: /* * kAlpha_8_SkColorType * There is no appropriate AV_PIX_FMT_* */ /* fall through */ default: return AV_PIX_FMT_NONE; } } static jobject JNICALL native_rescale_impl(JNIEnv *env, jclass clazz, jobject srcBitmap, jobject dstBitmap, jint sws_algo, jdouble p0, jdouble p1) { struct bitmap src = { .jbitmap = srcBitmap }; struct bitmap dst = { .jbitmap = dstBitmap }; jobject ret = NULL; // LOGI("algo %x %lf %lf", sws_algo, p0, p1); if(ANDROID_BITMAP_RESULT_SUCCESS == lock_bitmap(env, &src) && ANDROID_BITMAP_RESULT_SUCCESS == lock_bitmap(env, &dst)) { const uint8_t *src_planes[] = { src.buffer }; const int src_strides[] = { src.info.stride }; uint8_t *dst_planes[] = { dst.buffer }; const int dst_strides[] = { dst.info.stride }; const double params[] = { p0, p1 }; struct SwsContext *ctx; LOGI("%i", __LINE__); LOGI("src %i", src.info.format); LOGI("srcwidth %i", src.info.width); LOGI("srcheight %i", src.info.height); LOGI("dst %i", dst.info.format); LOGI("dst width %i", dst.info.width); LOGI("dst height %i", dst.info.height); LOGI("sws_algo %i", sws_algo); // Set loglevel (uncomment to debug ffmpeg issues) av_log_set_flags(AV_LOG_PRINT_LEVEL | AV_LOG_SKIP_REPEATED); av_log_set_level(AV_LOG_TRACE); ctx = sws_getContext(src.info.width, src.info.height, pix_fmt(src.info.format), dst.info.width, dst.info.height, pix_fmt(dst.info.format), sws_algo, NULL, NULL, params); LOGI("%i", __LINE__); if(ctx) { LOGI("%i", __LINE__); int res = sws_scale(ctx, src_planes, src_strides, 0, src.info.height, dst_planes, dst_strides); LOGI("%i", __LINE__); sws_freeContext(ctx); LOGI("%i", __LINE__); if(res > 0) { ret = dstBitmap; } } } LOGI("%i", __LINE__); unlock_bitmap(env, &src); LOGI("%i", __LINE__); unlock_bitmap(env, &dst); return ret; } static const char *g_rescaler_java_class = "com/schokoladenbrown/Smooth"; static const JNINativeMethod g_native_methods[] = { {"native_rescale", "(Landroid/graphics/Bitmap;Landroid/graphics/Bitmap;IDD)Landroid/graphics/Bitmap;", native_rescale_impl}, }; jint JNI_OnLoad(JavaVM *jvm, void *reserved) { JNIEnv *env = NULL; jclass cls; (*jvm)->AttachCurrentThread(jvm, &env, NULL); cls = (*env)->FindClass(env, g_rescaler_java_class); (*env)->RegisterNatives(env, cls, g_native_methods, sizeof g_native_methods / sizeof g_native_methods[0]); return JNI_VERSION_1_2; } }}} -- Ticket URL: <https://trac.ffmpeg.org/ticket/10140> FFmpeg <https://ffmpeg.org> FFmpeg issue tracker

1 23

#7155(ffmpeg:new): Add option to stop writing at position relative to EOF
by FFmpeg 16 Dec '24

16 Dec '24

#7155: Add option to stop writing at position relative to EOF ----------------------------------+--------------------------------------- Reporter: clone206 | Type: enhancement Status: new | Priority: wish Component: ffmpeg | Version: 3.4 Keywords: seek | Blocked By: Blocking: | Reproduced by developer: 0 Analyzed by developer: 0 | ----------------------------------+--------------------------------------- Summary of the bug: Feature request How to reproduce: N/A Add main option to allow stopping of writing to output at position relative to "end of file", where 0 is eof, and negative values are earlier in the file. Proposed switch: "-toeof", like "-sseof" but for stopping point instead of beginning point. Background: I have ripped SACD audio tracks with extraneous loud noises at the last few hundred milliseconds of each track, and want to chop off that duration from the end of each file as part of a batch process. I would like to do something like the following on each file: ffmpeg -i input.flac -toeof -00:00:00.9 output.flac -- Ticket URL: <https://trac.ffmpeg.org/ticket/7155> FFmpeg <https://ffmpeg.org> FFmpeg issue tracker

1 16

#9724(ffmpeg:new): Duplicate character pairs in Closed Captions
by FFmpeg 14 Dec '24

14 Dec '24

#9724: Duplicate character pairs in Closed Captions -------------------------------------+------------------------------------- Reporter: Selcuk | Type: defect Ozturk | Status: new | Priority: normal Component: ffmpeg | Version: 4.4.1 Keywords: eia_608, | Blocked By: closed captions | Blocking: | Reproduced by developer: 0 Analyzed by developer: 0 | -------------------------------------+------------------------------------- Summary of the bug: Bug in the handling of eia-608 closed captions. Captions have duplicated character pairs. The bug did not exist in ffmpeg versions 4.3.2 and earlier. How to reproduce: You will need a HDHomerun Prime and a cable service with cable card like Verizon FIOS or Comcast. {{{ % ffmpeg -i http://192.168.78.45:5004/auto/v103 -c:v libx264 -preset:v ultrafast -g 29 -crf 40 -s 128x72 -bsf:v h264_mp4toannexb -map 0:v -f mpegts -t 60 z-4.4.1.ts % ffmpeg -f lavfi -i movie=z-4.4.1.ts[out+subcc] z-4.4.1.srt }}} The resulting z-4.4.1.srt file has text like the following: ---- 5 00:00:04,571 --> 00:00:10,410 <font face="Monospace">{\an7}ABABORORTITIONON,, T THAHATT I I TETEXAXASS D DOEOESS H HAVAVEE E</font> 6 00:00:10,410 --> 00:00:11,845 <font face="Monospace">{\an7}TETEXAXASS D DOEOESS H HAVAVEE E LALAWSWS T THAHATT A ARERE P PUT</font> ---- Using the old releases available on https://johnvansickle.com/ffmpeg/ site, I have narrowed down the introduction of the bug somewhere between ffmpeg versions 4.3.2 and 4.4.1. All versions up to and including 4.3.2 are working properly and producing correct closed captions. All versions from 4.4.1 on have this bug. The problem is at the recording of the TS file and not at the extraction of SRT file. Playing the resulting TS file in VLC demonstrates the problem in closed captions. I can provide both the recorded TS files and the SRT files if needed. -- Ticket URL: <https://trac.ffmpeg.org/ticket/9724> FFmpeg <https://ffmpeg.org> FFmpeg issue tracker

1 18

#10657(undetermined:new): lead: unsupported format 0x6
by FFmpeg 10 Dec '24

10 Dec '24

#10657: lead: unsupported format 0x6 -------------------------------------+------------------------------------- Reporter: ami_stuff | Type: defect Status: new | Priority: normal Component: | Version: undetermined | unspecified Keywords: | Blocked By: Blocking: | Reproduced by developer: 0 Analyzed by developer: 0 | -------------------------------------+------------------------------------- {{{ ./ffmpeg -i lead_0x6.avi -y out.avi ffmpeg version N-112728-g409b29d3f9 Copyright (c) 2000-2023 the FFmpeg developers built with gcc 11 (Ubuntu 11.4.0-1ubuntu1~22.04) configuration: libavutil 58. 32.100 / 58. 32.100 libavcodec 60. 33.100 / 60. 33.100 libavformat 60. 17.100 / 60. 17.100 libavdevice 60. 4.100 / 60. 4.100 libavfilter 9. 13.100 / 9. 13.100 libswscale 7. 6.100 / 7. 6.100 libswresample 4. 13.100 / 4. 13.100 [lead @ 0x562051de78c0] unsupported format 0x6 is not implemented. Update your FFmpeg version to the newest one from Git. If the problem still occurs, it means that your file has a feature which has not been implemented. [lead @ 0x562051de78c0] If you want to help, upload a sample of this file to https://streams.videolan.org/upload/ and contact the ffmpeg-devel mailing list. (ffmpeg-devel(a)ffmpeg.org) [lead @ 0x562051de78c0] unsupported format 0x6 is not implemented. Update your FFmpeg version to the newest one from Git. If the problem still occurs, it means that your file has a feature which has not been implemented. [lead @ 0x562051de78c0] If you want to help, upload a sample of this file to https://streams.videolan.org/upload/ and contact the ffmpeg-devel mailing list. (ffmpeg-devel(a)ffmpeg.org) [lead @ 0x562051de78c0] unsupported format 0x6 is not implemented. Update your FFmpeg version to the newest one from Git. If the problem still occurs, it means that your file has a feature which has not been implemented. [lead @ 0x562051de78c0] If you want to help, upload a sample of this file to https://streams.videolan.org/upload/ and contact the ffmpeg-devel mailing list. (ffmpeg-devel(a)ffmpeg.org) [avi @ 0x562051de6600] Could not find codec parameters for stream 0 (Video: lead (LEAD / 0x4441454C), none, 524x524): unspecified pixel format Consider increasing the value for the 'analyzeduration' (0) and 'probesize' (5000000) options Input #0, avi, from 'lead_0x6.avi': Duration: 00:00:00.12, start: 0.000000, bitrate: 33731 kb/s Stream #0:0: Video: lead (LEAD / 0x4441454C), none, 524x524, 25 fps, 25 tbr, 25 tbn Stream mapping: Stream #0:0 -> #0:0 (lead (native) -> mpeg4 (native)) Press [q] to stop, [?] for help [lead @ 0x562051deda40] unsupported format 0x6 is not implemented. Update your FFmpeg version to the newest one from Git. If the problem still occurs, it means that your file has a feature which has not been implemented. [lead @ 0x562051deda40] If you want to help, upload a sample of this file to https://streams.videolan.org/upload/ and contact the ffmpeg-devel mailing list. (ffmpeg-devel(a)ffmpeg.org) [vist#0:0/lead @ 0x562051ded8c0] Error submitting packet to decoder: Not yet implemented in FFmpeg, patches welcome [lead @ 0x562051deda40] unsupported format 0x6 is not implemented. Update your FFmpeg version to the newest one from Git. If the problem still occurs, it means that your file has a feature which has not been implemented. [lead @ 0x562051deda40] If you want to help, upload a sample of this file to https://streams.videolan.org/upload/ and contact the ffmpeg-devel mailing list. (ffmpeg-devel(a)ffmpeg.org) [vist#0:0/lead @ 0x562051ded8c0] Error submitting packet to decoder: Not yet implemented in FFmpeg, patches welcome [lead @ 0x562051deda40] unsupported format 0x6 is not implemented. Update your FFmpeg version to the newest one from Git. If the problem still occurs, it means that your file has a feature which has not been implemented. [lead @ 0x562051deda40] If you want to help, upload a sample of this file to https://streams.videolan.org/upload/ and contact the ffmpeg-devel mailing list. (ffmpeg-devel(a)ffmpeg.org) [vist#0:0/lead @ 0x562051ded8c0] Error submitting packet to decoder: Not yet implemented in FFmpeg, patches welcome Cannot determine format of input stream 0:0 after EOF Error marking filters as finished Error while filtering: Invalid data found when processing input [vist#0:0/lead @ 0x562051ded8c0] Decode error rate 1 exceeds maximum 0.666667 [out#0/avi @ 0x562051dee700] Nothing was written into output file, because at least one of its streams received no packets. frame= 0 fps=0.0 q=0.0 Lsize= 0kB time=N/A bitrate=N/A speed=N/A Conversion failed! }}} -- Ticket URL: <https://trac.ffmpeg.org/ticket/10657> FFmpeg <https://ffmpeg.org> FFmpeg issue tracker

1 3

#6690(avformat:new): Raw Electronic Arts ADPCM support
by FFmpeg 09 Dec '24

09 Dec '24

#6690: Raw Electronic Arts ADPCM support ----------------------------------+--------------------------------------- Reporter: koops | Type: enhancement Status: new | Priority: normal Component: avformat | Version: unspecified Keywords: | Blocked By: Blocking: | Reproduced by developer: 0 Analyzed by developer: 0 | ----------------------------------+--------------------------------------- Summary of the bug: How to reproduce: {{{ $ ffmpeg -i sound.XA sound.wav sound.XA: Invalid data found when processing input }}} I would like support for headerless Electronic Arts ADPCM files to be added. These files are common in some Electronic Arts games, like Harry Potter and the Chamber of Secrets and Brother Bear. The format is similar to adpcm_ea_r1, but the file is always mono, there is no channels header. ADPCM history is always initialized to [0, 0]. File size is always a multiple of 15, there is no raw sample mode (0xEE). Sample rate is 22050Hz by default. Files can be encoded into this format using sx.exe: {{{ > sx -raw -eaxa_blk sample.wav -=sample.XA }} I attached a test case, a XA file and the corresponding decoded raw file. This is decoder code in C# (I release it under CC0): {{{ using System; using System.IO; using System.Text; namespace KoopsAudioDecoder { class Program { static int coeff1, coeff2, shift, adpcmHistory1 = 0, adpcmHistory2 = 0; static readonly int[] EA_XA_TABLE = new int[] { 0, 0, 240, 0, 460, -208, 392, -220, }; static void DecodeSingleFrame(BinaryReader stream, BinaryWriter outbuf) { int frameInfo = stream.ReadByte(); coeff1 = EA_XA_TABLE[((frameInfo >> 4) & 15) << 1]; coeff2 = EA_XA_TABLE[(((frameInfo >> 4) & 15) << 1) + 1]; shift = (frameInfo & 15) + 8; for (int i = 0; i < 14; i++) { int sample_byte = stream.ReadByte(); int[] nibbles = { sample_byte >> 4, sample_byte & 15 }; foreach (int nibble in nibbles) { int sample = GetSample(nibble); outbuf.Write(Clamp16(sample)); } } } private static int GetSample(int nibble) { int sample = (nibble << 28 >> shift) + (coeff1 * adpcmHistory1) + (coeff2 * adpcmHistory2) >> 8; adpcmHistory2 = adpcmHistory1; adpcmHistory1 = sample; return sample; } static private short Clamp16(int sample) { if (sample > 32767) { return 32767; } else if (sample < -32768) { return -32768; } else { return (short) sample; } } static int Main(string[] args) { if (args.Length != 1) { Console.WriteLine("This program takes only one argument, input file"); return 1; } string inputFileName = args[0], outputFileName = Path.ChangeExtension(inputFileName, "raw"); Stream inputFile = File.OpenRead(inputFileName), outputFile = File.OpenWrite(outputFileName); BinaryReader inputFileReader = new BinaryReader(inputFile); BinaryWriter outputFileWriter = new BinaryWriter(outputFile); while (inputFile.Length - inputFile.Position >= 15) { DecodeSingleFrame(inputFileReader, outputFileWriter); } if (inputFile.Length - inputFile.Position > 0) { Console.WriteLine("File has {0} spare bytes.", inputFile.Length - inputFile.Position); } return 0; } } } }}} -- Ticket URL: <https://trac.ffmpeg.org/ticket/6690> FFmpeg <https://ffmpeg.org> FFmpeg issue tracker

1 16

#7799(avcodec:new): hevc_mp4toannexb filter inserts extradata wrong position
by FFmpeg 07 Dec '24

07 Dec '24

#7799: hevc_mp4toannexb filter inserts extradata wrong position ---------------------------------+--------------------------------------- Reporter: gudbooy | Type: defect Status: new | Priority: normal Component: avcodec | Version: unspecified Keywords: | Blocked By: Blocking: | Reproduced by developer: 0 Analyzed by developer: 0 | ---------------------------------+--------------------------------------- Summary of the bug: After applied hevc_mp4toannexb filter to the attached video (refer to the below link), the frames become broken from the video players (e.g. VLC, ffplay) The problem is caused by prepending the extra-data to IRAP frames in libavcodec/hevc_mp4toannexb_bsf.c. This video contains own vps/sps/pps for every IRAP frames. The extradata from hevcc is slightly different from every IRAP frames have (in this case QP value is different) and the hevc_mp4toannexb filter prepends the different extradata to every IRAP frames, causing the broken frames. Video File Repo : https://www.dropbox.com/s/tpyohk6vf096zxm/hevc_after_mp4toannexb_conversion… I am afraid that I can't connect to ftp://upload.ffmpeg.org, so I just attached to the dropbox url How to reproduce: {{{ % ffmpeg -i hevc_after_mp4toannexb_conversion_qp_value_modified.mp4 -codec copy -bsf:v hevc_mp4toannexb output.hevc $vlc output.hevc }}} Patches should be submitted to the ffmpeg-devel mailing list and not this bug tracker. -- Ticket URL: <https://trac.ffmpeg.org/ticket/7799> FFmpeg <https://ffmpeg.org> FFmpeg issue tracker

1 30

#6207(avformat:new): Wrong mkv codec ID for ac3 with bitstream_id > 8
by FFmpeg 06 Dec '24

06 Dec '24

#6207: Wrong mkv codec ID for ac3 with bitstream_id > 8 --------------------------------------+---------------------------------- Reporter: cehoyos | Owner: Type: defect | Status: new Priority: normal | Component: avformat Version: git-master | Keywords: mkv ac3 Blocked By: | Blocking: Reproduced by developer: 0 | Analyzed by developer: 0 --------------------------------------+---------------------------------- I will attached two mkv samples with codec ID A_AC3/BSID9 and A_AC3/BSID10 that get an incorrect codec ID A_AC3 when remuxed with FFmpeg. {{{ $ ffmpeg -i ac3bsid9.mkv -acodec copy out.mkv ffmpeg version N-83691-g7f62368 Copyright (c) 2000-2017 the FFmpeg developers built with gcc 4.7 (SUSE Linux) configuration: --enable-gpl libavutil 55. 47.100 / 55. 47.100 libavcodec 57. 81.100 / 57. 81.100 libavformat 57. 66.102 / 57. 66.102 libavdevice 57. 3.100 / 57. 3.100 libavfilter 6. 74.100 / 6. 74.100 libswscale 4. 3.101 / 4. 3.101 libswresample 2. 4.100 / 2. 4.100 libpostproc 54. 2.100 / 54. 2.100 Input #0, matroska,webm, from 'ac3bsid9.mkv': Metadata: encoder : libebml v1.3.4 + libmatroska v1.4.5 creation_time : 2017-02-28T20:08:32.000000Z Duration: 00:00:01.02, start: 0.000000, bitrate: 141 kb/s Stream #0:0: Audio: ac3, 24000 Hz, mono, fltp, 96 kb/s (default) Metadata: BPS : 96000 BPS-eng : 96000 DURATION : 00:00:01.024000705 DURATION-eng : 00:00:01.024000705 NUMBER_OF_FRAMES: 16 NUMBER_OF_FRAMES-eng: 16 NUMBER_OF_BYTES : 12288 NUMBER_OF_BYTES-eng: 12288 _STATISTICS_WRITING_APP: mkvmerge v9.8.0 ('Kuglblids') 64bit _STATISTICS_WRITING_APP-eng: mkvmerge v9.8.0 ('Kuglblids') 64bit _STATISTICS_WRITING_DATE_UTC: 2017-02-28 20:08:32 _STATISTICS_WRITING_DATE_UTC-eng: 2017-02-28 20:08:32 _STATISTICS_TAGS: BPS DURATION NUMBER_OF_FRAMES NUMBER_OF_BYTES _STATISTICS_TAGS-eng: BPS DURATION NUMBER_OF_FRAMES NUMBER_OF_BYTES Output #0, matroska, to 'out.mkv': Metadata: encoder : Lavf57.66.102 Stream #0:0: Audio: ac3 ([0] [0][0] / 0x2000), 24000 Hz, mono, fltp, 96 kb/s (default) Metadata: BPS : 96000 BPS-eng : 96000 DURATION : 00:00:01.024000705 DURATION-eng : 00:00:01.024000705 NUMBER_OF_FRAMES: 16 NUMBER_OF_FRAMES-eng: 16 NUMBER_OF_BYTES : 12288 NUMBER_OF_BYTES-eng: 12288 _STATISTICS_WRITING_APP: mkvmerge v9.8.0 ('Kuglblids') 64bit _STATISTICS_WRITING_APP-eng: mkvmerge v9.8.0 ('Kuglblids') 64bit _STATISTICS_WRITING_DATE_UTC: 2017-02-28 20:08:32 _STATISTICS_WRITING_DATE_UTC-eng: 2017-02-28 20:08:32 _STATISTICS_TAGS: BPS DURATION NUMBER_OF_FRAMES NUMBER_OF_BYTES _STATISTICS_TAGS-eng: BPS DURATION NUMBER_OF_FRAMES NUMBER_OF_BYTES Stream mapping: Stream #0:0 -> #0:0 (copy) Press [q] to stop, [?] for help size= 13kB time=00:00:00.96 bitrate= 114.5kbits/s speed=3.69e+03x video:0kB audio:12kB subtitle:0kB other streams:0kB global headers:0kB muxing overhead: 11.832683% }}} {{{ $ ffmpeg -i ac3bsid10.mkv -acodec copy out.mkv ffmpeg version N-83691-g7f62368 Copyright (c) 2000-2017 the FFmpeg developers built with gcc 4.7 (SUSE Linux) configuration: --enable-gpl libavutil 55. 47.100 / 55. 47.100 libavcodec 57. 81.100 / 57. 81.100 libavformat 57. 66.102 / 57. 66.102 libavdevice 57. 3.100 / 57. 3.100 libavfilter 6. 74.100 / 6. 74.100 libswscale 4. 3.101 / 4. 3.101 libswresample 2. 4.100 / 2. 4.100 libpostproc 54. 2.100 / 54. 2.100 Input #0, matroska,webm, from 'ac3bsid10.mkv': Metadata: encoder : libebml v1.3.4 + libmatroska v1.4.5 creation_time : 2017-02-28T20:08:01.000000Z Duration: 00:00:01.15, start: 0.000000, bitrate: 136 kb/s Stream #0:0: Audio: ac3, 8000 Hz, mono, fltp, 96 kb/s (default) Metadata: BPS : 96083 BPS-eng : 96083 DURATION : 00:00:01.151990784 DURATION-eng : 00:00:01.151990784 NUMBER_OF_FRAMES: 6 NUMBER_OF_FRAMES-eng: 6 NUMBER_OF_BYTES : 13824 NUMBER_OF_BYTES-eng: 13824 _STATISTICS_WRITING_APP: mkvmerge v9.8.0 ('Kuglblids') 64bit _STATISTICS_WRITING_APP-eng: mkvmerge v9.8.0 ('Kuglblids') 64bit _STATISTICS_WRITING_DATE_UTC: 2017-02-28 20:08:01 _STATISTICS_WRITING_DATE_UTC-eng: 2017-02-28 20:08:01 _STATISTICS_TAGS: BPS DURATION NUMBER_OF_FRAMES NUMBER_OF_BYTES _STATISTICS_TAGS-eng: BPS DURATION NUMBER_OF_FRAMES NUMBER_OF_BYTES Output #0, matroska, to 'out.mkv': Metadata: encoder : Lavf57.66.102 Stream #0:0: Audio: ac3 ([0] [0][0] / 0x2000), 8000 Hz, mono, fltp, 96 kb/s (default) Metadata: BPS : 96083 BPS-eng : 96083 DURATION : 00:00:01.151990784 DURATION-eng : 00:00:01.151990784 NUMBER_OF_FRAMES: 6 NUMBER_OF_FRAMES-eng: 6 NUMBER_OF_BYTES : 13824 NUMBER_OF_BYTES-eng: 13824 _STATISTICS_WRITING_APP: mkvmerge v9.8.0 ('Kuglblids') 64bit _STATISTICS_WRITING_APP-eng: mkvmerge v9.8.0 ('Kuglblids') 64bit _STATISTICS_WRITING_DATE_UTC: 2017-02-28 20:08:01 _STATISTICS_WRITING_DATE_UTC-eng: 2017-02-28 20:08:01 _STATISTICS_TAGS: BPS DURATION NUMBER_OF_FRAMES NUMBER_OF_BYTES _STATISTICS_TAGS-eng: BPS DURATION NUMBER_OF_FRAMES NUMBER_OF_BYTES Stream mapping: Stream #0:0 -> #0:0 (copy) Press [q] to stop, [?] for help size= 15kB time=00:00:00.96 bitrate= 126.7kbits/s speed=5.03e+03x video:0kB audio:14kB subtitle:0kB other streams:0kB global headers:0kB muxing overhead: 9.997107% }}} -- Ticket URL: <https://trac.ffmpeg.org/ticket/6207> FFmpeg <https://ffmpeg.org> FFmpeg issue tracker

1 3