April 2023 - FFmpeg-trac - lists.ffmpeg.org

#5970(undetermined:new): No valid multicast port obtained from RTSP
by FFmpeg 11 Jul '25

11 Jul '25

#5970: No valid multicast port obtained from RTSP -------------------------------------+------------------------------------- Reporter: ioeir2 | Type: defect Status: new | Priority: normal Component: | Version: undetermined | unspecified Keywords: | Blocked By: Blocking: | Reproduced by developer: 0 Analyzed by developer: 0 | -------------------------------------+------------------------------------- Summary of the bug: Cannot get multicast RTSP stream from camera via ffmpeg/ffplay. ffmpeg/ffplay tries to connect to UDP port 0 instead of 40000. It sends in SETUP: Transport: RTP/AVP/UDP;multicast But should something like Transport: RTP/AVP;multicast;destination=224.1.2.4;port=40000-40001 How to reproduce: IP camera: Amcrest IPM-HX1, sw. version 2.420.AC00.15.R, build : 2016-09-08. Very popular at the moment IP camera. {{{ ./ffplay-3.2 -rtsp_transport udp_multicast 'rtsp://admin:password@10.0.1.20/cam/realmonitor?channel=1&subtype=0&proto=Dahua3&unicast=false' ffplay version 3.2 Copyright (c) 2003-2016 the FFmpeg developers built with Apple LLVM version 8.0.0 (clang-800.0.42.1) configuration: libavutil 55. 34.100 / 55. 34.100 libavcodec 57. 64.100 / 57. 64.100 libavformat 57. 56.100 / 57. 56.100 libavdevice 57. 1.100 / 57. 1.100 libavfilter 6. 65.100 / 6. 65.100 libswscale 4. 2.100 / 4. 2.100 libswresample 2. 3.100 / 2. 3.100 [udp @ 0x7fb20bc9d500] bind failed: Permission denied 0B f=0/0 [udp @ 0x7fb20bc9b1a0] bind failed: Permission denied [udp @ 0x7fb20bc9b220] bind failed: Permission denied Segmentation fault: 11 }}} -- Ticket URL: <https://trac.ffmpeg.org/ticket/5970> FFmpeg <https://ffmpeg.org> FFmpeg issue tracker

1 10

#9846(ffmpeg:new): DNxHR doesn't work with LB in Shutter Encoder
by FFmpeg 10 Jul '25

10 Jul '25

#9846: DNxHR doesn't work with LB in Shutter Encoder -------------------------------------+------------------------------------- Reporter: Soto Soto | Type: defect Status: new | Priority: normal Component: ffmpeg | Version: Keywords: ffmpeg | unspecified dnxhr | Blocked By: Blocking: | Reproduced by developer: 0 Analyzed by developer: 0 | -------------------------------------+------------------------------------- '''Summary of the bug:''' I've just been forwarded by the creator of Shutter Encoder who uses FFmpeg as the backend of their software. I wanted to create a small 480x270 file at low bitrate and the render stops after a few minutes. The last line the console says is "Assertion s->buf_ptr < s->buf_end failed at src/libavcodec/put_bits.h:150". How to reproduce: 1. Used a 1920x1080p, 60fps, h.264 10gb file. 2. Dropped it in Shutter Encoder, set to DNxHR > LB ("Low Bitrate" doesn't state the number of the bitrate itself). Change scale to 480x270p 3. Render 4. Error shown in the last line of the console (right click in progress bar and click "Console"). -- Ticket URL: <https://trac.ffmpeg.org/ticket/9846> FFmpeg <https://ffmpeg.org> FFmpeg issue tracker

1 9

#9281(ffmpeg:new): wrong $Number$ value while reading mpd
by FFmpeg 04 Jul '25

04 Jul '25

#9281: wrong $Number$ value while reading mpd -------------------------------------+------------------------------------- Reporter: Kostik | Type: defect Status: new | Priority: normal Component: ffmpeg | Version: Keywords: mpd | unspecified manifest | Blocked By: Blocking: | Reproduced by developer: 0 Analyzed by developer: 0 | -------------------------------------+------------------------------------- Hello, using the latest static build ffmpeg version N-57631-gebedd26eef-static I want to read mpd and convert to mpegts - this part works ok, except one manifest looks like ffmpeg make wrong calculation for $Number$ In my case I have availabilityStartTime="2021-05-27T11:59:16Z" media="$RepresentationID$-$Number$.m4s" duration="180180" startNumber="487925" presentationTimeOffset="89360526151" I expect $Number$ to be converted to 488430 (and other players do so), but ffmpeg try retrieve 397033568 here is full manifest <?xml version="1.0" encoding="UTF-8"?> <MPD xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns="urn:mpeg:dash:schema:mpd:2011" xmlns:cenc="urn:mpeg:cenc:2013" xmlns:mspr="urn:microsoft:playready" xsi:schemaLocation="urn:mpeg:dash:schema:mpd:2011 DASH-MPD.xsd" type="dynamic" minimumUpdatePeriod="PT6S" minBufferTime="PT1.000S" maxSegmentDuration="PT3.003S" availabilityStartTime="2021-05-27T11:59:16Z" timeShiftBufferDepth="PT36.036S" publishTime="2021-06-07T19:25:48Z" profiles="urn:mpeg:dash:profile:isoff-live:2011"> <Period id="487925" start="PT976813.47S"> <AdaptationSet mimeType="video/mp4" segmentAlignment="true" startWithSAP="1" maxWidth="1280" maxHeight="720" maxFrameRate="60000/1001" par="16:9"> <InbandEventStream schemeIdUri="urn:mpeg:dash:event:2012" value="1"/> <Accessibility schemeIdUri="urn:scte:dash:cc:cea-608:2015" value="CC1:und;CC2:und"/> <SegmentTemplate timescale="90000" media="$RepresentationID$-$Number$.m4s" startNumber="487925"/> <Representation id="video1" width="1280" height="720" frameRate="60000/1001" sar="1:1" scanType="progressive" bandwidth="6562944" codecs="avc1.640029"/> </AdaptationSet> <AdaptationSet mimeType="audio/mp4" lang="en" segmentAlignment="true" startWithSAP="1"> <Role schemeIdUri="urn:mpeg:dash:role:2011" value="main"/> <SegmentTemplate timescale="90000" media="$RepresentationID$-$Number$.m4s" startNumber="487925"/> <Representation id="audio1" audioSamplingRate="44100" bandwidth="96000" codecs="mp4a.40.2"> <AudioChannelConfiguration schemeIdUri="urn:mpeg:dash:23003:3:audio_channel_configuration:2011" value="2"/> </Representation> </AdaptationSet> <AdaptationSet mimeType="audio/mp4" lang="es" segmentAlignment="true" startWithSAP="1"> <Role schemeIdUri="urn:mpeg:dash:role:2011" value="dub"/> <SegmentTemplate timescale="90000" media="$RepresentationID$-$Number$.m4s" startNumber="487925"/> <Representation id="audio2" audioSamplingRate="44100" bandwidth="96000" codecs="mp4a.40.2"> <AudioChannelConfiguration schemeIdUri="urn:mpeg:dash:23003:3:audio_channel_configuration:2011" value="2"/> </Representation> </AdaptationSet> </Period> <UTCTiming schemeIdUri="urn:mpeg:dash:utc:direct:2014" value="2021-06-07T19:25:48Z"/> </MPD> -- Ticket URL: <https://trac.ffmpeg.org/ticket/9281> FFmpeg <https://ffmpeg.org> FFmpeg issue tracker

1 2

#4566(ffmpeg:new): ffmpeg won't copy metadata ("StreamTitle") from audio live stream (transcoding)
by FFmpeg 29 Jun '25

29 Jun '25

#4566: ffmpeg won't copy metadata ("StreamTitle") from audio live stream (transcoding) ----------------------------------+------------------------------------- Reporter: easydoor | Type: defect Status: new | Priority: important Component: ffmpeg | Version: 2.6.2 Keywords: metadata | Blocked By: Blocking: | Reproduced by developer: 0 Analyzed by developer: 0 | ----------------------------------+------------------------------------- It won't copy "StreamTitle" from input to output while transcoding input from mp3 to aac. I'm using version v2.6.1 compiled by me on ubuntu 14. I try simpliest transcoding with -c:a copy option and sending it to icecast v2.4.1 and as a client I'm using latest winamp and vlc. In booth player as title is showing only the mount point (in this case mystream) from icecast: {{{ icecast://source:mypass@x.x.x.x:8000/mystream }}} and not the StreamTitle from input file. Why and how can I just pass it from input to output? I don't think that problem is Icecast, because I try to stream with SAM Broadcaster and in Winamp I see updated StreamTitle in real time. Here is the command line: {{{ /root/ffmpeg_sources/ffmpeg*/./ffmpeg -stats -report -i http://streaming.streamonomy.com/ElectricFM -c:a copy -content_type audio/mpeg -f mp3 icecast://source:mypass@x.x.x.x:8000/mystream }}} and here is the output: {{{ root@vs4063:~# /root/ffmpeg_sources/ffmpeg*/./ffmpeg -stats -report -i http://streaming.streamonomy.com/ElectricFM -c:a copy -content_type audio/mpeg -f mp3 icecast://source:mypass@x.x.x.x:8000/mystream ffmpeg started on 2015-03-23 at 03:01:01 Report written to "ffmpeg-20150323-030101.log" ffmpeg version 2.6.1 Copyright (c) 2000-2015 the FFmpeg developers built with gcc 4.8 (Ubuntu 4.8.2-19ubuntu1) configuration: --prefix=/root/ffmpeg_build --extra- cflags=-I/root/ffmpeg_build/include --extra- ldflags=-L/root/ffmpeg_build/lib --bindir=/root/bin --enable-gpl --enable- libass --enable-libfdk-aac --enable-libfaac --enable-libfreetype --enable- libmp3lame --enable-libopus --enable-libtheora --enable-libvorbis --enable-libvpx --enable-libx264 --enable-libaacplus --enable-nonfree libavutil 54. 20.100 / 54. 20.100 libavcodec 56. 26.100 / 56. 26.100 libavformat 56. 25.101 / 56. 25.101 libavdevice 56. 4.100 / 56. 4.100 libavfilter 5. 11.102 / 5. 11.102 libswscale 3. 1.101 / 3. 1.101 libswresample 1. 1.100 / 1. 1.100 libpostproc 53. 3.100 / 53. 3.100 Input #0, mp3, from 'http://streaming.streamonomy.com/ElectricFM': Metadata: icy-br : 128 icy-description : ElectricFM plays today's dance hits! icy-genre : Electronic Dance Pop icy-name : ElectricFM.com - America's Real Dance! icy-pub : 1 icy-url : http://www.electricfm.com StreamTitle : KYGO f/ CONRAD - FIRESTONE Duration: N/A, start: 0.000000, bitrate: 128 kb/s Stream #0:0: Audio: mp3, 44100 Hz, stereo, s16p, 128 kb/s Output #0, mp3, to 'icecast://source:mypass@x.x.x.x:8000/mystream': Metadata: icy-br : 128 icy-description : ElectricFM plays today's dance hits! icy-genre : Electronic Dance Pop icy-name : ElectricFM.com - America's Real Dance! icy-pub : 1 icy-url : http://www.electricfm.com StreamTitle : KYGO f/ CONRAD - FIRESTONE TSSE : Lavf56.25.101 Stream #0:0: Audio: mp3, 44100 Hz, stereo, 128 kb/s Stream mapping: Stream #0:0 -> #0:0 (copy) Press [q] to stop, [?] for help size= 2093kB time=00:02:13.95 bitrate= 128.0kbits/s video:0kB audio:2093kB subtitle:0kB other streams:0kB global headers:0kB muxing overhead: 0.016237% }}} [[Image(http://ffmpeg.gusari.org/download/file.php?id=103)]] In winamp first track is original and second transcoded.. Here is with debug: {{{ /root/ffmpeg_sources/ffmpeg*/./ffmpeg -stats -v 512 -report -i http://streaming.streamonomy.com/ElectricFM -c:a copy -content_type audio/mpeg -f mp3 icecast://source:mypass@x.x.x.x:8000/mystream/mystream ffmpeg started on 2015-03-23 at 03:51:36 Report written to "ffmpeg-20150323-035136.log" ffmpeg version 2.6.1 Copyright (c) 2000-2015 the FFmpeg developers built with gcc 4.8 (Ubuntu 4.8.2-19ubuntu1) configuration: --prefix=/root/ffmpeg_build --extra- cflags=-I/root/ffmpeg_build/include --extra- ldflags=-L/root/ffmpeg_build/lib --bindir=/root/bin --enable-gpl --enable- libass --enable-libfdk-aac --enable-libfaac --enable-libfreetype --enable- libmp3lame --enable-libopus --enable-libtheora --enable-libvorbis --enable-libvpx --enable-libx264 --enable-libaacplus --enable-nonfree libavutil 54. 20.100 / 54. 20.100 libavcodec 56. 26.100 / 56. 26.100 libavformat 56. 25.101 / 56. 25.101 libavdevice 56. 4.100 / 56. 4.100 libavfilter 5. 11.102 / 5. 11.102 libswscale 3. 1.101 / 3. 1.101 libswresample 1. 1.100 / 1. 1.100 libpostproc 53. 3.100 / 53. 3.100 Splitting the commandline. Reading option '-stats' ... matched as option 'stats' (print progress report during encoding) with argument '1'. Reading option '-v' ... matched as option 'v' (set logging level) with argument '512'. Reading option '-report' ... matched as option 'report' (generate a report) with argument '1'. Reading option '-i' ... matched as input file with argument 'http://streaming.streamonomy.com/ElectricFM'. Reading option '-c:a' ... matched as option 'c' (codec name) with argument 'copy'. Reading option '-content_type' ... matched as AVOption 'content_type' with argument 'audio/mpeg'. Reading option '-f' ... matched as option 'f' (force format) with argument 'mp3'. Reading option 'icecast://source:mypass@x.x.x.x:8000/mystream' ... matched as output file. Finished splitting the commandline. Parsing a group of options: global . Applying option stats (print progress report during encoding) with argument 1. Applying option v (set logging level) with argument 512. Applying option report (generate a report) with argument 1. Successfully parsed a group of options. Parsing a group of options: input file http://streaming.streamonomy.com/ElectricFM. Successfully parsed a group of options. Opening an input file: http://streaming.streamonomy.com/ElectricFM. [http @ 0x217cf80] request: GET /ElectricFM HTTP/1.1 User-Agent: Lavf/56.25.101 Accept: */* Range: bytes=0- Connection: close Host: streaming.streamonomy.com Icy-MetaData: 1 [http @ 0x217cf80] header='HTTP/1.0 200 OK' [http @ 0x217cf80] http_code=200 [http @ 0x217cf80] header='Accept-Ranges: none' [http @ 0x217cf80] header='Content-Type: audio/mpeg' [http @ 0x217cf80] header='icy-br:128' [http @ 0x217cf80] header='ice-audio-info: ice-samplerate=44100;ice- bitrate=128;ice-channels=2' [http @ 0x217cf80] header='icy-br:128' [http @ 0x217cf80] header='icy-description:ElectricFM plays today's dance hits!' [http @ 0x217cf80] header='icy-genre:Electronic Dance Pop' [http @ 0x217cf80] header='icy-name:ElectricFM.com - America's Real Dance!' [http @ 0x217cf80] header='icy-pub:1' [http @ 0x217cf80] header='icy-url:http://www.electricfm.com' [http @ 0x217cf80] header='Server: Icecast 2.3.3-kh8' [http @ 0x217cf80] header='Cache-Control: no-cache, no-store' [http @ 0x217cf80] header='Pragma: no-cache' [http @ 0x217cf80] header='Access-Control-Allow-Origin: *' [http @ 0x217cf80] header='Access-Control-Allow-Headers: Origin, Accept, X-Requested-With, Content-Type' [http @ 0x217cf80] header='Access-Control-Allow-Methods: GET, OPTIONS, HEAD' [http @ 0x217cf80] header='Connection: close' [http @ 0x217cf80] header='Expires: Mon, 26 Jul 1997 05:00:00 GMT' [http @ 0x217cf80] header='icy-metaint:16000' [http @ 0x217cf80] header='' [mp3 @ 0x217daa0] Format mp3 probed with size=2048 and score=51 [mp3 @ 0x217daa0] Before avformat_find_stream_info() pos: 0 bytes read:2508 seeks:0 [mp3 @ 0x217daa0] All info found [mp3 @ 0x217daa0] After avformat_find_stream_info() pos: 21504 bytes read:23824 seeks:0 frames:50 Input #0, mp3, from 'http://streaming.streamonomy.com/ElectricFM': Metadata: icy-br : 128 icy-description : ElectricFM plays today's dance hits! icy-genre : Electronic Dance Pop icy-name : ElectricFM.com - America's Real Dance! icy-pub : 1 icy-url : http://www.electricfm.com StreamTitle : PAUL OAKENFOLD and DISFUNKTION f/ SPITFIRE - BEAUTIFUL WORLD Duration: N/A, start: 0.000000, bitrate: 128 kb/s Stream #0:0, 50, 1/14112000: Audio: mp3, 44100 Hz, stereo, s16p, 128 kb/s Successfully opened the file. Parsing a group of options: output file icecast://source:mypass@x.x.x.x:8000/mystream. Applying option c:a (codec name) with argument copy. Applying option f (force format) with argument mp3. Successfully parsed a group of options. Opening an output file: icecast://source:mypass@x.x.x.x:8000/mystream. [http @ 0x2191520] request: PUT /mystream HTTP/1.1 User-Agent: Lavf/56.25.101 Accept: */* Expect: 100-continue Connection: close Host: x.x.x.x:8000 Content-Type: audio/mpeg Icy-MetaData: 1 Ice-Public: 0 Authorization: Basic c291cmNlOnNpbnVzZm04MA== [http @ 0x2191520] header='HTTP/1.1 100 Continue' [http @ 0x2191520] http_code=100 [http @ 0x2191520] header='' Successfully opened the file. Output #0, mp3, to 'icecast://source:mypass@x.x.x.x:8000/mystream5.3': Metadata: icy-br : 128 icy-description : ElectricFM plays today's dance hits! icy-genre : Electronic Dance Pop icy-name : ElectricFM.com - America's Real Dance! icy-pub : 1 icy-url : http://www.electricfm.com StreamTitle : PAUL OAKENFOLD and DISFUNKTION f/ SPITFIRE - BEAUTIFUL WORLD TSSE : Lavf56.25.101 Stream #0:0, 0, 1/14112000: Audio: mp3, 44100 Hz, stereo, 128 kb/s Stream mapping: Stream #0:0 -> #0:0 (copy) Press [q] to stop, [?] for help size= 101kB time=00:00:06.42 bitrate= 128.5kbits/s video:0kB audio:100kB subtitle:0kB other streams:0kB global headers:0kB muxing overhead: 0.371530% Input file #0 (http://streaming.streamonomy.com/ElectricFM) Input stream #0:0 (audio): 246 packets read (102818 bytes); Total: 246 packets (102818 bytes) demuxed Output file #0 (icecast://source:mypass@x.x.x.x:8000/mystream): Output stream #0:0 (audio): 246 packets muxed (102818 bytes); Total: 246 packets (102818 bytes) muxed 0 frames successfully decoded, 0 decoding errors [AVIOContext @ 0x2192e80] Statistics: 0 seeks, 247 writeouts [AVIOContext @ 0x21884c0] Statistics: 105326 bytes read, 0 seeks }}} The main usage of transcoding would be: {{{ /root/ffmpeg_sources/ffmpeg/./ffmpeg -stats -v 1024 -report -i http://stream2.electricfm.com -acodec libaacplus -ar 44.1k -ab 40k -ac 2 -content_type audio/aacp -f adts icecast://source:mypass@x.x.x.x:8000/electricfm@40k -acodec libaacplus -ar 44.1k -ab 64k -ac 2 -content_type audio/aacp -f adts icecast://source:mypass@x.x.x.x:8000/electricfm@64k < /dev/null >/dev/null 2>/var/log/ffmpeg.log & }}} but it gave me same result..not showing "StreamTitle" from input to output! I try with options -map_metada 0:s:0 and others option, but without success. -- Ticket URL: <https://trac.ffmpeg.org/ticket/4566> FFmpeg <https://ffmpeg.org> FFmpeg issue tracker

1 23

#10188(avdevice:new): kmsgrab pixel formats missing DRM_FORMAT_ARGB2101010 and others
by FFmpeg 22 Jun '25

22 Jun '25

#10188: kmsgrab pixel formats missing DRM_FORMAT_ARGB2101010 and others -------------------------------------+------------------------------------- Reporter: jean | Type: defect Status: new | Priority: normal Component: avdevice | Version: git- Keywords: kmsgrab | master pixfmt | Blocked By: Blocking: | Reproduced by developer: 0 Analyzed by developer: 0 | -------------------------------------+------------------------------------- Summary of the bug: When a DRM plane is using certain formats found in modern wayland compositors, kmsgrab will fail to recognize the pixel format and refuse to start. How to reproduce: On KDE Plasma wayland 5.26.5: {{{ % sudo ffmpeg -f kmsgrab -i - output.mp4 ffmpeg version N-109841-ge3bbf5c17d Copyright (c) 2000-2023 the FFmpeg developers built with gcc 12.2.1 (GCC) 20230201 ... [kmsgrab @ 0x559fd171b2c0] Framebuffer pixel format 30335241 is not a known supported format. }}} This was tested on Arch Linux. The specific pixfmt missing in my case was `DRM_FORMAT_ARGB2101010`, though it's possible other formats of this classification (32 bpp format with 10 bits per color and 2 bits of alpha) might also be used and would also need to be added. -- Ticket URL: <https://trac.ffmpeg.org/ticket/10188> FFmpeg <https://ffmpeg.org> FFmpeg issue tracker

1 3

#6468(undetermined:new): ffmpeg doesn't maintain chapters when concatenating two MP4 files using the concat demuxer
by FFmpeg 21 Jun '25

21 Jun '25

#6468: ffmpeg doesn't maintain chapters when concatenating two MP4 files using the concat demuxer -------------------------------------+------------------------------------- Reporter: whereswardy | Type: defect Status: new | Priority: normal Component: | Version: undetermined | unspecified Keywords: | Blocked By: Blocking: | Reproduced by developer: 0 Analyzed by developer: 0 | -------------------------------------+------------------------------------- I'm trying to concatenate two MP4 files using the concat demuxer and want to retain the chapter markers that exist in both files so that the output file contains all the chapters from both of my input files. The source files contain chapter markers according to `mediainfo` which I want to be maintained in the output, but when using the `-map_chapters` option in ffmpeg they don't appear in the output file. I'm concatenating the following two files from `streams.txt`: {{{ file 'episode2.mp4' file 'episode3.mp4' }}} which contain the following chapter/menu data (output cut down for brevity): {{{ $ mediainfo episode2.mp4 ... Menu ID : 3 Codec ID : text Duration : 22mn 25s Language : English Encoded date : UTC 2017-06-18 15:27:40 Tagged date : UTC 2017-06-18 15:27:40 Bit rate mode : CBR 00:00:00.000 : Chapter 1 00:00:59.720 : Chapter 2 ... }}} and I'm using the following ffmpeg command: {{{ ffmpeg -f concat -safe 0 -i streams.txt -map_metadata 0 -map_chapters 0 -c copy output.mp4 }}} however the output.mp4 file contains no chapter markers according to `mediainfo` and there's nothing viewable in any media player. I'm using ffmpeg 3.3.2 on Ubuntu 14.04.5: {{{ $ ffmpeg -version ffmpeg version 3.3.1 Copyright (c) 2000-2017 the FFmpeg developers built with gcc 4.8 (Ubuntu 4.8.4-2ubuntu1~14.04.3) configuration: --extra-libs=-ldl --prefix=/opt/ffmpeg --mandir=/usr/share/man --enable-avresample --disable-debug --enable- nonfree --enable-gpl --enable-version3 --enable-libopencore-amrnb --enable-libopencore-amrwb --disable-decoder=amrnb --disable-decoder=amrwb --enable-libpulse --enable-libfreetype --enable-gnutls --enable-libx264 --enable-libx265 --enable-libfdk-aac --enable-libvorbis --enable- libmp3lame --enable-libopus --enable-libvpx --enable-libspeex --enable- libass --enable-avisynth --enable-libsoxr --enable-libxvid --enable- libvidstab --enable-libwavpack --enable-nvenc libavutil 55. 58.100 / 55. 58.100 libavcodec 57. 89.100 / 57. 89.100 libavformat 57. 71.100 / 57. 71.100 libavdevice 57. 6.100 / 57. 6.100 libavfilter 6. 82.100 / 6. 82.100 libavresample 3. 5. 0 / 3. 5. 0 libswscale 4. 6.100 / 4. 6.100 libswresample 2. 7.100 / 2. 7.100 libpostproc 54. 5.100 / 54. 5.100 }}} {{{ $ uname -a Linux server 3.13.0-119-generic #166-Ubuntu SMP Wed May 3 12:18:55 UTC 2017 x86_64 x86_64 x86_64 GNU/Linux }}} -- Ticket URL: <https://trac.ffmpeg.org/ticket/6468> FFmpeg <https://ffmpeg.org> FFmpeg issue tracker

1 4

#9522(undetermined:new): Certain H.264 videos cannot decode with videotoolbox
by FFmpeg 19 Jun '25

19 Jun '25

#9522: Certain H.264 videos cannot decode with videotoolbox -------------------------------------+------------------------------------- Reporter: forthrin | Type: defect Status: new | Priority: normal Component: | Version: git- undetermined | master Keywords: | Blocked By: videotoolbox gpu | Blocking: | Reproduced by developer: 0 Analyzed by developer: 0 | -------------------------------------+------------------------------------- For reasons unknown, a percentage of H.264 videos fail to hardware decode with videotoolbox. Enclosed is a dozen different single frame specimens that all cause the same problem and should thus help quickly identify and resolve the issue. {{{ $ ffmpeg -hwaccel videotoolbox -i 01.mp4 -xerror -f mp4 -y /dev/null ffmpeg version git-2021-11-21-18f22bf Copyright (c) 2000-2021 the FFmpeg developers built with Apple clang version 12.0.5 (clang-1205.0.22.9) configuration: --enable-nonfree --enable-gpl --enable-libass --enable- libx264 --enable-libx265 --enable-libssh --enable-libzimg --enable-opencl --enable-libmp3lame libavutil 57. 9.100 / 57. 9.100 libavcodec 59. 13.100 / 59. 13.100 libavformat 59. 9.101 / 59. 9.101 libavdevice 59. 0.101 / 59. 0.101 libavfilter 8. 17.100 / 8. 17.100 libswscale 6. 1.100 / 6. 1.100 libswresample 4. 0.100 / 4. 0.100 libpostproc 56. 0.100 / 56. 0.100 Input #0, mov,mp4,m4a,3gp,3g2,mj2, from '01.mp4': Metadata: major_brand : isom minor_version : 512 compatible_brands: isomiso2avc1mp41 Duration: 00:00:00.04, start: 0.000000, bitrate: 402 kb/s Stream #0:0[0x1](und): Video: h264 (High) (avc1 / 0x31637661), yuv420p(progressive), 1920x1080 [SAR 1:1 DAR 16:9], 244 kb/s, 23.99 fps, 23.99 tbr, 16k tbn (default) Metadata: handler_name : VideoHandler vendor_id : [0][0][0][0] Stream mapping: Stream #0:0 -> #0:0 (h264 (native) -> h264 (libx264)) Press [q] to stop, [?] for help Error creating Videotoolbox decoder. videotoolbox hwaccel requested for input stream #0:0, but cannot be initialized. [h264 @ 0x7fce00d13580] decode_slice_header error [h264 @ 0x7fce00d13580] no frame! Conversion failed! $ }}} -- Ticket URL: <https://trac.ffmpeg.org/ticket/9522> FFmpeg <https://ffmpeg.org> FFmpeg issue tracker

1 3

#9473(ffmpeg:new): gdigrab screen captures are interrupted by secure desktop pop-ups
by FFmpeg 15 Jun '25

15 Jun '25

#9473: gdigrab screen captures are interrupted by secure desktop pop-ups -----------------------------------+-------------------------------------- Reporter: leopold84 | Type: defect Status: new | Priority: important Component: ffmpeg | Version: git-master Keywords: gdigrab | Blocked By: Blocking: | Reproduced by developer: 0 Analyzed by developer: 0 | -----------------------------------+-------------------------------------- '''Summary of the bug:''' If you start screen capture with gdigrab and any secure desktop pop-up will appear (UAC or anything else), capture immediately stops. '''How to reproduce:''' 1. Start screen capture using '''gdigrab''' device as input {{{ ffmpeg -f gdigrab -framerate 30 -i desktop output.mkv }}} 2. Launch any program as administrator or make a secure desktop to appear any other way 3. Once returned to the normal desktop, you will see that capture has stopped with the error similar to this one {{{ Failed to capture image (error 5)trate= 2.2kbits/s speed=0.54x desktop: I/O error }}} '''Expect result:''' If it's not possible to capture secure desktop with gdigrab, at least make it so recording doesn't stop and capture a black screen instead of secure desktop -- Ticket URL: <https://trac.ffmpeg.org/ticket/9473> FFmpeg <https://ffmpeg.org> FFmpeg issue tracker

1 7

#9751(swscale:new): Incorrect YUV->RGB24 conversion results on IBM Power9
by FFmpeg 09 Jun '25

09 Jun '25

#9751: Incorrect YUV->RGB24 conversion results on IBM Power9 -------------------------------------+------------------------------------- Reporter: gciaparrone | Type: defect Status: new | Priority: normal Component: swscale | Version: git- | master Keywords: | Blocked By: Blocking: | Reproduced by developer: 0 Analyzed by developer: 0 | -------------------------------------+------------------------------------- Converting a YUV frame into an RGB24 image seems to produce incorrect results on an IBM Power9 processor. Compiling ffmpeg with --disable- altivec solves the issue. The problem might be related to this old issue pointed out by Hong Bo Peng here: https://trac.ffmpeg.org/ticket/7124#comment:7 This can be more easily seen by converting a completely black image from RGB to YUV and then back to RGB on an IBM Power9 (or possibly on any Little Endian processor with ALTIVEC support?). The output image has all pixels set to [16, 16, 16] instead of [0, 0, 0]. The issue spans multiple versions of ffmpeg, including the current git master version. Using --disable-altivec or running the command on a non-ALTIVEC processor outputs the correct image with all [0, 0, 0] pixels. Input image: Output image (IBM Power9): Output image (AMD Ryzen 5 1600X processor): Output image (IBM Power9, --disable-altivec): How to reproduce: {{{ # convert RGB image to YUV420p $ ffmpeg -i black.png -pix_fmt yuv420p black.yuv # convert it back to RGB $ ffmpeg -s:v 64x64 -pix_fmt yuv420p -i black.yuv -frames:v 1 -pix_fmt rgb24 reblack.png }}} -- Ticket URL: <https://trac.ffmpeg.org/ticket/9751> FFmpeg <https://ffmpeg.org> FFmpeg issue tracker

1 16

#9996(ffmpeg:new): When remuxing dolby atmos mkv to mp4, complexity index is not present.
by FFmpeg 09 Jun '25

09 Jun '25

#9996: When remuxing dolby atmos mkv to mp4, complexity index is not present. -----------------------------------+--------------------------------------- Reporter: BlueWindy | Type: defect Status: new | Priority: normal Component: ffmpeg | Version: unspecified Keywords: | Blocked By: Blocking: | Reproduced by developer: 0 Analyzed by developer: 0 | -----------------------------------+--------------------------------------- Summary of the bug: Here is a Dolby Atmos sample file with an EAC3-JOC audio stream : https://we.tl/jxvi4Pgwz9 source : https://thedigitaltheater.com/dolby-trailers/ From this, if I demux the EAC3-JOC, as you can see the complexity index is set correctly. <img width="346" alt="demuxed eac3-joc" src="https://user- images.githubusercontent.com/40682277/198607696-cace19e5-ea56-4544-a1a7-676…"> However, when I remux MKV to MP4, the complexity index is not present. <img width="338" alt="MKV to MP4" src="https://user- images.githubusercontent.com/40682277/198609017-02fc30f6-d458-4412-81d5-2ba…"> The reason this bug needs to be resolved is that, in the case of a smartphone that supports Dolby Atmos, the Dolby Atmos virtualizer is automatically activated only when the complexity index is presented. How to reproduce: {{{ ffmpeg -i DD+Atmos.mkv -c copy DD+Atmos.mp4 ffmpeg version N-108886-g79508ee523-20221028 Copyright (c) 2000-2022 the FFmpeg developers built with gcc 12.2.0 (crosstool-NG 1.25.0.90_cf9beb1) configuration: --prefix=/ffbuild/prefix --pkg-config-flags=--static --pkg-config=pkg-config --cross-prefix=x86_64-w64-mingw32- --arch=x86_64 --target-os=mingw32 --enable-gpl --enable-version3 --disable-debug --disable-w32threads --enable-pthreads --enable-iconv --enable-libxml2 --enable-zlib --enable-libfreetype --enable-libfribidi --enable-gmp --enable-lzma --enable-fontconfig --enable-libvorbis --enable-opencl --disable-libpulse --enable-libvmaf --disable-libxcb --disable-xlib --enable-amf --enable-libaom --enable-libaribb24 --enable-avisynth --enable-libdav1d --enable-libdavs2 --disable-libfdk-aac --enable- ffnvcodec --enable-cuda-llvm --enable-frei0r --enable-libgme --enable- libkvazaar --enable-libass --enable-libbluray --enable-libjxl --enable- libmp3lame --enable-libopus --enable-librist --enable-libssh --enable- libtheora --enable-libvpx --enable-libwebp --enable-lv2 --disable-libmfx --enable-libvpl --enable-libopencore-amrnb --enable-libopencore-amrwb --enable-libopenh264 --enable-libopenjpeg --enable-libopenmpt --enable- librav1e --enable-librubberband --enable-schannel --enable-sdl2 --enable- libsoxr --enable-libsrt --enable-libsvtav1 --enable-libtwolame --enable- libuavs3d --disable-libdrm --disable-vaapi --enable-libvidstab --enable- vulkan --enable-libshaderc --enable-libplacebo --enable-libx264 --enable- libx265 --enable-libxavs2 --enable-libxvid --enable-libzimg --enable- libzvbi --extra-cflags=-DLIBTWOLAME_STATIC --extra-cxxflags= --extra- ldflags=-pthread --extra-ldexeflags= --extra-libs=-lgomp --extra- version=20221028 libavutil 57. 39.101 / 57. 39.101 libavcodec 59. 51.100 / 59. 51.100 libavformat 59. 34.101 / 59. 34.101 libavdevice 59. 8.101 / 59. 8.101 libavfilter 8. 49.101 / 8. 49.101 libswscale 6. 8.112 / 6. 8.112 libswresample 4. 9.100 / 4. 9.100 libpostproc 56. 7.100 / 56. 7.100 Input #0, matroska,webm, from 'DD+Atmos.mkv': Metadata: encoder : libebml v1.3.4 + libmatroska v1.4.5 creation_time : 2018-03-08T15:37:18.000000Z Duration: 00:01:51.03, start: 0.000000, bitrate: 9165 kb/s Stream #0:0: Video: h264 (High), yuv420p(progressive), 1920x1080 [SAR 1:1 DAR 16:9], 30 fps, 30 tbr, 1k tbn (default) Metadata: BPS : 8719852 BPS-eng : 8719852 DURATION : 00:01:50.966000000 DURATION-eng : 00:01:50.966000000 NUMBER_OF_FRAMES: 3329 NUMBER_OF_FRAMES-eng: 3329 NUMBER_OF_BYTES : 120950899 NUMBER_OF_BYTES-eng: 120950899 _STATISTICS_WRITING_APP: mkvmerge v12.0.0 ('Trust / Lust') 64bit _STATISTICS_WRITING_APP-eng: mkvmerge v12.0.0 ('Trust / Lust') 64bit _STATISTICS_WRITING_DATE_UTC: 2018-03-08 15:37:18 _STATISTICS_WRITING_DATE_UTC-eng: 2018-03-08 15:37:18 _STATISTICS_TAGS: BPS DURATION NUMBER_OF_FRAMES NUMBER_OF_BYTES _STATISTICS_TAGS-eng: BPS DURATION NUMBER_OF_FRAMES NUMBER_OF_BYTES Stream #0:1(eng): Audio: eac3, 48000 Hz, 5.1(side), fltp, 448 kb/s (default) Metadata: BPS : 448000 BPS-eng : 448000 DURATION : 00:01:50.944000000 DURATION-eng : 00:01:50.944000000 NUMBER_OF_FRAMES: 3467 NUMBER_OF_FRAMES-eng: 3467 NUMBER_OF_BYTES : 6212864 NUMBER_OF_BYTES-eng: 6212864 _STATISTICS_WRITING_APP: mkvmerge v12.0.0 ('Trust / Lust') 64bit _STATISTICS_WRITING_APP-eng: mkvmerge v12.0.0 ('Trust / Lust') 64bit _STATISTICS_WRITING_DATE_UTC: 2018-03-08 15:37:18 _STATISTICS_WRITING_DATE_UTC-eng: 2018-03-08 15:37:18 _STATISTICS_TAGS: BPS DURATION NUMBER_OF_FRAMES NUMBER_OF_BYTES _STATISTICS_TAGS-eng: BPS DURATION NUMBER_OF_FRAMES NUMBER_OF_BYTES [mp4 @ 000001d3e2ed6980] track 1: codec frame size is not set Output #0, mp4, to 'DD+Atmos.mp4': Metadata: encoder : Lavf59.34.101 Stream #0:0: Video: h264 (High) (avc1 / 0x31637661), yuv420p(progressive), 1920x1080 [SAR 1:1 DAR 16:9], q=2-31, 30 fps, 30 tbr, 16k tbn (default) Metadata: BPS : 8719852 BPS-eng : 8719852 DURATION : 00:01:50.966000000 DURATION-eng : 00:01:50.966000000 NUMBER_OF_FRAMES: 3329 NUMBER_OF_FRAMES-eng: 3329 NUMBER_OF_BYTES : 120950899 NUMBER_OF_BYTES-eng: 120950899 _STATISTICS_WRITING_APP: mkvmerge v12.0.0 ('Trust / Lust') 64bit _STATISTICS_WRITING_APP-eng: mkvmerge v12.0.0 ('Trust / Lust') 64bit _STATISTICS_WRITING_DATE_UTC: 2018-03-08 15:37:18 _STATISTICS_WRITING_DATE_UTC-eng: 2018-03-08 15:37:18 _STATISTICS_TAGS: BPS DURATION NUMBER_OF_FRAMES NUMBER_OF_BYTES _STATISTICS_TAGS-eng: BPS DURATION NUMBER_OF_FRAMES NUMBER_OF_BYTES Stream #0:1(eng): Audio: eac3 (ec-3 / 0x332D6365), 48000 Hz, 5.1(side), fltp, 448 kb/s (default) Metadata: BPS : 448000 BPS-eng : 448000 DURATION : 00:01:50.944000000 DURATION-eng : 00:01:50.944000000 NUMBER_OF_FRAMES: 3467 NUMBER_OF_FRAMES-eng: 3467 NUMBER_OF_BYTES : 6212864 NUMBER_OF_BYTES-eng: 6212864 _STATISTICS_WRITING_APP: mkvmerge v12.0.0 ('Trust / Lust') 64bit _STATISTICS_WRITING_APP-eng: mkvmerge v12.0.0 ('Trust / Lust') 64bit _STATISTICS_WRITING_DATE_UTC: 2018-03-08 15:37:18 _STATISTICS_WRITING_DATE_UTC-eng: 2018-03-08 15:37:18 _STATISTICS_TAGS: BPS DURATION NUMBER_OF_FRAMES NUMBER_OF_BYTES _STATISTICS_TAGS-eng: BPS DURATION NUMBER_OF_FRAMES NUMBER_OF_BYTES Stream mapping: Stream #0:0 -> #0:0 (copy) Stream #0:1 -> #0:1 (copy) Press [q] to stop, [?] for help frame= 3329 fps=0.0 q=-1.0 Lsize= 124269kB time=00:01:50.93 bitrate=9176.7kbits/s speed= 995x video:118116kB audio:6067kB subtitle:0kB other streams:0kB global headers:0kB muxing overhead: 0.068845% }}} -- Ticket URL: <https://trac.ffmpeg.org/ticket/9996> FFmpeg <https://ffmpeg.org> FFmpeg issue tracker

1 22