#1753(undetermined:new): Delay output for X seconds
#1753: Delay output for X seconds -------------------------------------+------------------------------------- Reporter: burek | Type: Status: new | enhancement Component: | Priority: wish undetermined | Version: Keywords: | unspecified Blocking: | Blocked By: Analyzed by developer: 0 | Reproduced by developer: 0 -------------------------------------+------------------------------------- It would be nice to add a feature where the output could be delayed for certain amount of time (specified in seconds or hh:mm:ss.mmm). One use case for this might be the case where we want to capture the video, only when a certain event occurs (like lightning bolt, robbery or trespassing for example). If we start capturing the output at that exact moment, we might loose some valuable time, but if the output was buffered, then capturing would start in the past, enabling people to record an important event. How to make use of the feature? Start one ffmpeg to capture and buffer the webcam input (the output will start after 10 seconds and will continue real-time, always being late for 10 seconds, comparing to the current time): {{{ ffmpeg -f v4l2 -i /dev/video0 -vf delay 10 -af delay 10 -f mpegts udp://localhost:1234 }}} Start another ffmpeg only when some important event occurs (triggered by the sensor or something similar): {{{ ffmpeg -f mpegts -i udp://localhost:1234 -map 0 -c copy capture.avi }}} Obviously capture.avi will start recording from the past, considering the current time the event was triggered, which will allow the beginning of the event to get recorded as well. -- Ticket URL: <https://ffmpeg.org/trac/ffmpeg/ticket/1753> FFmpeg <http://ffmpeg.org> FFmpeg issue tracker
#1753: Delay output for X seconds -------------------------------------+------------------------------------- Reporter: burek | Owner: Type: enhancement | Status: new Priority: wish | Component: Version: unspecified | undetermined Keywords: | Resolution: Blocking: | Blocked By: Analyzed by developer: 0 | Reproduced by developer: 0 -------------------------------------+------------------------------------- Comment (by burek): I can't edit the original text, but there is a mistake. Instead of "-vf delay 10 -af delay 10" it should say "-vf delay=10 -af delay=10" -- Ticket URL: <https://ffmpeg.org/trac/ffmpeg/ticket/1753#comment:1> FFmpeg <http://ffmpeg.org> FFmpeg issue tracker
#1753: Delay output for X seconds -------------------------------------+------------------------------------- Reporter: burek | Owner: Type: enhancement | Status: new Priority: wish | Component: Version: unspecified | undetermined Keywords: | Resolution: Blocking: | Blocked By: Analyzed by developer: 0 | Reproduced by developer: 0 -------------------------------------+------------------------------------- Comment (by burek): If this is not viable to implement at the filter level, then it might be done as an output option "-delay <seconds>" to be used like this: {{{ ffmpeg -f v4l2 -i /dev/video0 -delay 10 -f mpegts udp://localhost:1234 }}} The expected result should be that the output is always 10 seconds late in comparison to the input. -- Ticket URL: <https://ffmpeg.org/trac/ffmpeg/ticket/1753#comment:2> FFmpeg <http://ffmpeg.org> FFmpeg issue tracker
#1753: Delay output for X seconds -------------------------------------+------------------------------------- Reporter: burek | Owner: Type: enhancement | Status: new Priority: wish | Component: Version: unspecified | undetermined Keywords: | Resolution: Blocking: | Blocked By: Analyzed by developer: 0 | Reproduced by developer: 0 -------------------------------------+------------------------------------- Comment (by ubitux): This -delay option doesn't seem to even be recognized at all anymore anyway. Possibly a dec/enc flag issue. -- Ticket URL: <https://ffmpeg.org/trac/ffmpeg/ticket/1753#comment:3> FFmpeg <http://ffmpeg.org> FFmpeg issue tracker
#1753: Delay output for X seconds -------------------------------------+------------------------------------- Reporter: burek | Owner: Type: enhancement | Status: new Priority: wish | Component: Version: unspecified | undetermined Keywords: | Resolution: Blocking: | Blocked By: Analyzed by developer: 0 | Reproduced by developer: 0 -------------------------------------+------------------------------------- Comment (by cehoyos): Replying to [comment:3 ubitux]:
This -delay option doesn't seem to even be recognized at all anymore anyway.
Please elaborate... -- Ticket URL: <https://ffmpeg.org/trac/ffmpeg/ticket/1753#comment:4> FFmpeg <http://ffmpeg.org> FFmpeg issue tracker
#1753: Delay output for X seconds -------------------------------------+------------------------------------- Reporter: burek | Owner: Type: enhancement | Status: new Priority: wish | Component: Version: unspecified | undetermined Keywords: | Resolution: Blocking: | Blocked By: Analyzed by developer: 0 | Reproduced by developer: 0 -------------------------------------+------------------------------------- Comment (by ubitux): Replying to [comment:4 cehoyos]:
Replying to [comment:3 ubitux]:
This -delay option doesn't seem to even be recognized at all anymore anyway.
Please elaborate...
FFmpeg 1.2: {{{ % ffmpeg -f v4l2 -i /dev/video0 -delay 20 -vcodec rawvideo -f mpegts udp://127.0.0.1:1234 ffmpeg version 1.2.1 Copyright (c) 2000-2013 the FFmpeg developers built on May 10 2013 16:31:05 with gcc 4.8.0 (GCC) 20130502 (prerelease) configuration: --prefix=/usr --disable-debug --disable-static --enable- avresample --enable-dxva2 --enable-fontconfig --enable-gpl --enable-libass --enable-libbluray --enable-libfreetype --enable-libgsm --enable- libmodplug --enable-libmp3lame --enable-libopencore_amrnb --enable- libopencore_amrwb --enable-libopenjpeg --enable-libopus --enable-libpulse --enable-librtmp --enable-libschroedinger --enable-libspeex --enable- libtheora --enable-libv4l2 --enable-libvorbis --enable-libvpx --enable- libx264 --enable-libxvid --enable-postproc --enable-runtime-cpudetect --enable-shared --enable-vdpau --enable-version3 --enable-x11grab libavutil 52. 18.100 / 52. 18.100 libavcodec 54. 92.100 / 54. 92.100 libavformat 54. 63.104 / 54. 63.104 libavdevice 54. 3.103 / 54. 3.103 libavfilter 3. 42.103 / 3. 42.103 libswscale 2. 2.100 / 2. 2.100 libswresample 0. 17.102 / 0. 17.102 libpostproc 52. 2.100 / 52. 2.100 [video4linux2,v4l2 @ 0x1447080] Estimating duration from bitrate, this may be inaccurate Input #0, video4linux2,v4l2, from '/dev/video0': Duration: N/A, start: 1773.705972, bitrate: 110592 kb/s Stream #0:0: Video: rawvideo (I420 / 0x30323449), yuv420p, 640x480, 110592 kb/s, 30 fps, 30 tbr, 1000k tbn, 1000k tbc Output #0, mpegts, to 'udp://127.0.0.1:1234': Metadata: encoder : Lavf54.63.104 Stream #0:0: Video: rawvideo (I420 / 0x30323449), yuv420p, 640x480, q=2-31, 200 kb/s, 90k tbn, 30 tbc Stream mapping: Stream #0:0 -> #0:0 (rawvideo -> rawvideo) Press [q] to stop, [?] for help frame= 59 fps= 30 q=0.0 Lsize= 28627kB time=00:00:01.96 bitrate=119242.2kbits/s video:26550kB audio:0kB subtitle:0 global headers:0kB muxing overhead 7.821740% }}} FFmpeg git/master: {{{ % ./ffmpeg -f v4l2 -i /dev/video0 -delay 20 -vcodec rawvideo -f mpegts udp://127.0.0.1:1234 ffmpeg version N-53432-gaccbb7b Copyright (c) 2000-2013 the FFmpeg developers built on May 25 2013 01:08:59 with gcc 4.8.0 (GCC) 20130502 (prerelease) configuration: --enable-gpl --enable-version3 --enable-fontconfig --enable-libfreetype --enable-libmp3lame --enable-libvorbis --enable- libxvid --enable-libx264 --enable-libvpx --enable-libtheora --enable- x11grab --enable-libopenjpeg --enable-libass --enable-libmodplug --enable- libv4l2 --cc=colorgcc --samples=/home/ubitux/fate-samples --prefix=/tmp/ffinstall --disable-runtime-cpudetect --enable-libcelt --enable-libopencv --enable-frei0r --enable-libcaca --enable-libiec61883 --enable-libopencore-amrwb --enable-libopencore-amrnb --enable-libopus --enable-libpulse --enable-libspeex --enable-libquvi --assert-level=2 --enable-libzmq --enable-libschroedinger libavutil 52. 34.100 / 52. 34.100 libavcodec 55. 12.100 / 55. 12.100 libavformat 55. 7.100 / 55. 7.100 libavdevice 55. 1.101 / 55. 1.101 libavfilter 3. 70.100 / 3. 70.100 libswscale 2. 3.100 / 2. 3.100 libswresample 0. 17.102 / 0. 17.102 libpostproc 52. 3.100 / 52. 3.100 Input #0, video4linux2,v4l2, from '/dev/video0': Duration: N/A, start: 1766.944404, bitrate: 147456 kb/s Stream #0:0: Video: rawvideo (YUY2 / 0x32595559), yuyv422, 640x480, 147456 kb/s, 30 fps, 30 tbr, 1000k tbn, 1000k tbc Codec AVOption delay () specified for output file #0 (udp://127.0.0.1:1234) is not an encoding option. }}} That wiki page is mentioning such command: http://ffmpeg.org/trac/ffmpeg/wiki/How%20to%20capture%20a%20lightning%20%28t... -- Ticket URL: <https://ffmpeg.org/trac/ffmpeg/ticket/1753#comment:5> FFmpeg <http://ffmpeg.org> FFmpeg issue tracker
#1753: Delay output for X seconds -------------------------------------+------------------------------------- Reporter: burek | Owner: Type: enhancement | Status: new Priority: wish | Component: Version: unspecified | undetermined Keywords: | Resolution: Blocking: | Blocked By: Analyzed by developer: 0 | Reproduced by developer: 0 -------------------------------------+------------------------------------- Comment (by cehoyos): Replying to [comment:5 ubitux]:
Replying to [comment:4 cehoyos]:
Replying to [comment:3 ubitux]:
This -delay option doesn't seem to even be recognized at all anymore anyway.
Please elaborate...
FFmpeg 1.2:
{{{ % ffmpeg -f v4l2 -i /dev/video0 -delay 20 -vcodec rawvideo -f mpegts udp://127.0.0.1:1234 ffmpeg version 1.2.1 Copyright (c) 2000-2013 the FFmpeg developers
Are you sure -delay has any effect in this command line? I may miss something but I don't think so. -- Ticket URL: <https://ffmpeg.org/trac/ffmpeg/ticket/1753#comment:6> FFmpeg <http://ffmpeg.org> FFmpeg issue tracker
#1753: Delay output for X seconds -------------------------------------+------------------------------------- Reporter: burek | Owner: Type: enhancement | Status: new Priority: wish | Component: Version: unspecified | undetermined Keywords: | Resolution: Blocking: | Blocked By: Analyzed by developer: 0 | Reproduced by developer: 0 -------------------------------------+------------------------------------- Comment (by ubitux): Replying to [comment:6 cehoyos]:
Replying to [comment:5 ubitux]:
Replying to [comment:4 cehoyos]:
Replying to [comment:3 ubitux]:
This -delay option doesn't seem to even be recognized at all anymore anyway.
Please elaborate...
FFmpeg 1.2:
{{{ % ffmpeg -f v4l2 -i /dev/video0 -delay 20 -vcodec rawvideo -f mpegts udp://127.0.0.1:1234 ffmpeg version 1.2.1 Copyright (c) 2000-2013 the FFmpeg developers
Are you sure -delay has any effect in this command line? I may miss something but I don't think so.
Probably not; I was unable to get something working from the examples in that page anyway. The behaviour is just different now (aborting instead of ignoring). That may be the appropriate thing to do in that case though (but wiki needs to be updated). -- Ticket URL: <https://ffmpeg.org/trac/ffmpeg/ticket/1753#comment:7> FFmpeg <http://ffmpeg.org> FFmpeg issue tracker
#1753: Delay output for X seconds -------------------------------------+------------------------------------- Reporter: burek | Owner: Type: enhancement | Status: new Priority: wish | Component: Version: unspecified | undetermined Keywords: | Resolution: Blocking: | Blocked By: Analyzed by developer: 0 | Reproduced by developer: 0 -------------------------------------+------------------------------------- Comment (by burek): The wiki says it clearly: "Now, this all looks great, except FFmpeg doesn't have (yet) a "-delay <seconds>" option" The page mentions that it would be great if such option would exist, which would avoid all the workaround explained in that wiki page. Just to clear things up, this is a feature request, and the issue is marked as such. The "-delay" option was never before implemented in ffmpeg. -- Ticket URL: <https://ffmpeg.org/trac/ffmpeg/ticket/1753#comment:8> FFmpeg <http://ffmpeg.org> FFmpeg issue tracker
#1753: Delay output for X seconds -------------------------------------+------------------------------------- Reporter: burek | Owner: Type: enhancement | Status: new Priority: wish | Component: Version: unspecified | undetermined Keywords: | Resolution: Blocking: | Blocked By: Analyzed by developer: 0 | Reproduced by developer: 0 -------------------------------------+------------------------------------- Comment (by cehoyos): @ubitux, @saste: Do you finally believe me? Or is there any more proof needed to convince you? -- Ticket URL: <https://ffmpeg.org/trac/ffmpeg/ticket/1753#comment:9> FFmpeg <http://ffmpeg.org> FFmpeg issue tracker
#1753: Delay output for X seconds -------------------------------------+------------------------------------- Reporter: burek | Owner: Type: enhancement | Status: new Priority: wish | Component: Version: unspecified | undetermined Keywords: | Resolution: Blocking: | Blocked By: Analyzed by developer: 0 | Reproduced by developer: 0 -------------------------------------+------------------------------------- Comment (by richardpl): This is just filter that buffers frames from input and drop older frames from buffer when they appear to not be needed any more. When something interesting happens (for example another sensor filter finds something), filter would just stop buffering and will start returning all frames from cache and any other frames from input. Both encoding and sensor filter would need to be done in realtime anyway as caching have limits. -- Ticket URL: <https://ffmpeg.org/trac/ffmpeg/ticket/1753#comment:10> FFmpeg <http://ffmpeg.org> FFmpeg issue tracker
#1753: Delay output for X seconds -------------------------------------+------------------------------------ Reporter: burek | Owner: Type: enhancement | Status: open Priority: wish | Component: avfilter Version: git-master | Resolution: Keywords: | Blocked By: Blocking: | Reproduced by developer: 0 Analyzed by developer: 0 | -------------------------------------+------------------------------------ Changes (by richardpl): * status: new => open * version: unspecified => git-master * component: undetermined => avfilter -- Ticket URL: <https://ffmpeg.org/trac/ffmpeg/ticket/1753#comment:11> FFmpeg <http://ffmpeg.org> FFmpeg issue tracker
participants (1)
-
FFmpeg