#4951(ffmpeg:new): Different frame rate using ts and mov containers
#4951: Different frame rate using ts and mov containers -------------------------------------+------------------------------------- Reporter: liamf91 | Type: defect Status: new | Priority: normal Component: ffmpeg | Version: 2.8.1 Keywords: h264 mov ts | Blocked By: frame rate incorrect | Reproduced by developer: 0 Blocking: | Analyzed by developer: 0 | -------------------------------------+------------------------------------- I am using a udp video source @ 1080i, 25FPS, 25K bitrate, when I output into a .ts and use ffprobe the file shows 25 fps, 50 tbr, 90k tbn, 50 tbc I then change the file extension to be a mov and probe the file i get the following output 50 fps, 50 tbr, 90k tbn, 50 tbc. I am using the following command but just changing the file extension ffmpeg -i udp://@239.200.90.1:11080 -vcodec copy -acodec pcm_s16le -top 1 /tmp/interlaced1080.mov The output from ffmpeg is the following Output #0, mov, to '/tmp/interlaced1080.mov': Metadata: encoder : Lavf56.40.101 Stream #0:0: Video: h264 (avc1 / 0x31637661), yuv420p, 1920x1080 [SAR 1:1 DAR 16:9], q=2-31, 25 fps, 50 tbr, 90k tbn, 90k tbc Stream #0:1: Audio: pcm_s16le (sowt / 0x74776F73), 48000 Hz, stereo, s16, 1536 kb/s Which displays the it is outputting into the file at 25 fps but this isn't the same when I use ffprobe on the finished file. My version and build information is as follows ffmpeg version 2.8.1-static http://johnvansickle.com/ffmpeg/ Copyright (c) 2000-2015 the FFmpeg developers built with gcc 4.9.3 (Debian 4.9.3-4) -- Ticket URL: <https://trac.ffmpeg.org/ticket/4951> FFmpeg <https://ffmpeg.org> FFmpeg issue tracker
#4951: Different frame rate using ts and mov containers -------------------------------------+------------------------------------- Reporter: liamf91 | Owner: Type: defect | Status: new Priority: normal | Component: Version: 2.8.1 | undetermined Keywords: h264 mov | Resolution: mpegts | Blocked By: Blocking: | Reproduced by developer: 0 Analyzed by developer: 0 | -------------------------------------+------------------------------------- Changes (by cehoyos): * keywords: h264 mov ts frame rate incorrect => h264 mov mpegts * component: ffmpeg => undetermined Comment: Is the issue reproducible with current FFmpeg git head? Please provide your command line together with the complete, uncut console output of current FFmpeg git head to make this a valid ticket. Please explain which playback application plays which of the two output samples with wrong speed. -- Ticket URL: <https://trac.ffmpeg.org/ticket/4951#comment:1> FFmpeg <https://ffmpeg.org> FFmpeg issue tracker
#4951: Different frame rate using ts and mov containers -------------------------------------+------------------------------------- Reporter: liamf91 | Owner: Type: defect | Status: new Priority: normal | Component: Version: 2.8.1 | undetermined Keywords: h264 mov | Resolution: mpegts | Blocked By: Blocking: | Reproduced by developer: 0 Analyzed by developer: 0 | -------------------------------------+------------------------------------- Comment (by liamf91): I am using the latest static build available from the ffmpeg website. I have also tried this with the latest ffmpeg deb build. {{{ ffmpeg version 2.8.1-static http://johnvansickle.com/ffmpeg/ Copyright (c) 2000-2015 the FFmpeg developers built with gcc 4.9.3 (Debian 4.9.3-4) configuration: --enable-gpl --enable-version3 --disable-shared --disable-debug --enable-runtime-cpudetect --enable-libmp3lame --enable- libx264 --enable-libx265 --enable-libwebp --enable-libspeex --enable- libvorbis --enable-libvpx --enable-libfreetype --enable-fontconfig --enable-libxvid --enable-libopencore-amrnb --enable-libopencore-amrwb --enable-libtheora --enable-libvo-aacenc --enable-libvo-amrwbenc --enable- gray --enable-libopenjpeg --enable-libopus --enable-libass --enable-gnutls --enable-libvidstab --enable-libsoxr --enable-frei0r --enable-libfribidi --cc=gcc-4.9 libavutil 54. 31.100 / 54. 31.100 libavcodec 56. 60.100 / 56. 60.100 libavformat 56. 40.101 / 56. 40.101 libavdevice 56. 4.100 / 56. 4.100 libavfilter 5. 40.101 / 5. 40.101 libswscale 3. 1.101 / 3. 1.101 libswresample 1. 2.101 / 1. 2.101 libpostproc 53. 3.100 / 53. 3.100 Hyper fast Audio and Video encoder usage: ffmpeg [options] [[infile options] -i infile]... {[outfile options] outfile}... }}} The command line I used to wrap into the ts container is: {{{ ffmpeg -i udp://@239.200.90.1:11080 -vcodec copy -acodec pcm_s16le -top 1 /tmp/interlaced1080.ts }}} the command line i used to wrap into the mov container is: {{{ ffmpeg -i udp://@239.200.90.1:11080 -vcodec copy -acodec pcm_s16le -top 1 /tmp/interlaced1080.ts }}} Other than changing the file extensions these are the exact same command. When I probe the files after I have finished writing to them, the frame rate is different in the mov than in the ts. As you can see I am using copy option for the video codec and as the source is @ 25FPS i am not aware of any reason why these should differ. -- Ticket URL: <https://trac.ffmpeg.org/ticket/4951#comment:2> FFmpeg <https://ffmpeg.org> FFmpeg issue tracker
#4951: Different frame rate using ts and mov containers -------------------------------------+------------------------------------- Reporter: liamf91 | Owner: Type: defect | Status: new Priority: normal | Component: Version: 2.8.1 | undetermined Keywords: h264 mov | Resolution: mpegts | Blocked By: Blocking: | Reproduced by developer: 0 Analyzed by developer: 0 | -------------------------------------+------------------------------------- Comment (by cehoyos): Replying to [comment:2 liamf91]:
I am using the latest static build available from the ffmpeg website.
The FFmpeg website does not provide any builds, only source code.
I have also tried this with the latest ffmpeg deb build.
Then please provide command line including complete, uncut console output to make this a valid ticket.
When I probe the files after I have finished writing to them, the frame rate is different in the mov than in the ts.
And what effect does this have? I mean, is one of the files working and the other not? -- Ticket URL: <https://trac.ffmpeg.org/ticket/4951#comment:3> FFmpeg <https://ffmpeg.org> FFmpeg issue tracker
#4951: Different frame rate using ts and mov containers -------------------------------------+------------------------------------- Reporter: liamf91 | Owner: Type: defect | Status: new Priority: normal | Component: Version: 2.8.1 | undetermined Keywords: h264 mov | Resolution: mpegts | Blocked By: Blocking: | Reproduced by developer: 0 Analyzed by developer: 0 | -------------------------------------+------------------------------------- Comment (by liamf91): OK, the ffmpeg website provides a link to a static build. Output from the deb build {{{ ffmpeg version 2.6.4 Copyright (c) 2000-2015 the FFmpeg developers built with gcc 4.9.2 (Debian 4.9.2-10) configuration: --prefix=/usr --extra-cflags='-g -O2 -fstack-protector- strong -Wformat -Werror=format-security ' --extra-ldflags='-Wl,-z,relro' --cc='ccache cc' --enable-shared --enable-libmp3lame --enable-gpl --enable-nonfree --enable-libvorbis --enable-pthreads --enable-libfaac --enable-libxvid --enable-postproc --enable-x11grab --enable-libgsm --enable-libtheora --enable-libopencore-amrnb --enable-libopencore-amrwb --enable-libx264 --enable-libspeex --enable-nonfree --disable-stripping --enable-libvpx --enable-libschroedinger --disable-encoder=libschroedinger --enable-version3 --enable-libopenjpeg --enable-librtmp --enable-avfilter --enable-libfreetype --enable-libvo-aacenc --disable-decoder=amrnb --enable-libvo-amrwbenc --enable-libaacplus --libdir=/usr/lib/x86_64 -linux-gnu --disable-vda --enable-libbluray --enable-libcdio --enable- gnutls --enable-frei0r --enable-openssl --enable-libass --enable-libopus --enable-fontconfig --enable-libpulse --disable-mips32r2 --disable- mipsdspr1 --disable-mipsdspr2 --enable-libvidstab --enable-libzvbi --enable-avresample --disable-htmlpages --disable-podpages --enable- libutvideo --enable-libfdk-aac --enable-libx265 --enable-libiec61883 --enable-vaapi --enable-libdc1394 --disable-altivec --shlibdir=/usr/lib/x86_64-linux-gnu libavutil 54. 20.100 / 54. 20.100 libavcodec 56. 26.100 / 56. 26.100 libavformat 56. 25.101 / 56. 25.101 libavdevice 56. 4.100 / 56. 4.100 libavfilter 5. 11.102 / 5. 11.102 libavresample 2. 1. 0 / 2. 1. 0 libswscale 3. 1.101 / 3. 1.101 libswresample 1. 1.100 / 1. 1.100 libpostproc 53. 3.100 / 53. 3.100 Hyper fast Audio and Video encoder usage: ffmpeg [options] [[infile options] -i infile]... {[outfile options] outfile}... }}} Working? It depends what you mean by working? Do they play in a media player? Yes. Are they at the expected frame rate? No. You seem to be missing my point. When I output the file in a ts container the video is @ 25FPS, when I then output the file into a mov container this then changes to 50FPS. Nothing changes with the source which is at 25FPS and nothing changes with the commands I have used, other than the file extension, which I have included examples of in my previous comment. -- Ticket URL: <https://trac.ffmpeg.org/ticket/4951#comment:4> FFmpeg <https://ffmpeg.org> FFmpeg issue tracker
#4951: Different frame rate using ts and mov containers -------------------------------------+------------------------------------- Reporter: liamf91 | Owner: Type: defect | Status: closed Priority: normal | Component: Version: 2.8.1 | undetermined Keywords: h264 mov | Resolution: mpegts | needs_more_info Blocking: | Blocked By: Analyzed by developer: 0 | Reproduced by developer: 0 -------------------------------------+------------------------------------- Changes (by cehoyos): * status: new => closed * resolution: => needs_more_info Comment: Please reopen this ticket if you can provide the command line that allows to reproduce the issue together with the complete, uncut console output. -- Ticket URL: <https://trac.ffmpeg.org/ticket/4951#comment:5> FFmpeg <https://ffmpeg.org> FFmpeg issue tracker
#4951: Different frame rate using ts and mov containers -------------------------------------+------------------------------------- Reporter: liamf91 | Owner: Type: defect | Status: closed Priority: normal | Component: Version: 2.8.1 | undetermined Keywords: h264 mov | Resolution: mpegts | needs_more_info Blocking: | Blocked By: Analyzed by developer: 0 | Reproduced by developer: 0 -------------------------------------+------------------------------------- Comment (by liamf91): I can provide a file which you can use to reproduce what I have mentioned. The commands will just be as i mentioned earlier but instead of using the udp stream you will just specify the file. Does ffmpeg offer anywhere I can upload the file as it is quite a large file (16GB~)? -- Ticket URL: <https://trac.ffmpeg.org/ticket/4951#comment:6> FFmpeg <https://ffmpeg.org> FFmpeg issue tracker
#4951: Different frame rate using ts and mov containers -------------------------------------+------------------------------------- Reporter: liamf91 | Owner: Type: defect | Status: closed Priority: normal | Component: Version: 2.8.1 | undetermined Keywords: h264 mov | Resolution: mpegts | needs_more_info Blocking: | Blocked By: Analyzed by developer: 0 | Reproduced by developer: 0 -------------------------------------+------------------------------------- Comment (by cehoyos): Before you upload a sample please test current FFmpeg git head and provide command line together with complete, uncut console output. If the issue is also reproducible with file input, please provide such a command line, issues with network input are much harder to reproduce. -- Ticket URL: <https://trac.ffmpeg.org/ticket/4951#comment:7> FFmpeg <https://ffmpeg.org> FFmpeg issue tracker
#4951: Different frame rate using ts and mov containers -------------------------------------+------------------------------------- Reporter: liamf91 | Owner: Type: defect | Status: closed Priority: normal | Component: Version: 2.8.1 | undetermined Keywords: h264 mov | Resolution: mpegts | needs_more_info Blocking: | Blocked By: Analyzed by developer: 0 | Reproduced by developer: 0 -------------------------------------+------------------------------------- Comment (by liamf91): I have written video data from a stream to a .ts file using -codec copy. The file is 1080i 25FPS 25Mb/s bitrate. I have then tried to convert the file using the latest git head and the following is the command and console output. {{{ ffmpeg -i ffmpeg_test_video.ts -vcodec copy -acodec pcm_s24le -top 1 ffmpeg_test_video.mov ffmpeg version N-76159-gda43e9e Copyright (c) 2000-2015 the FFmpeg developers built with gcc 4.9.2 (Debian 4.9.2-10) configuration: --enable-gpl --enable-version3 --enable-nonfree --enable- postproc --enable-x11grab --enable-libopencore-amrnb --enable-libopencore- amrwb --enable-libdc1394 --enable-libfaac --enable-libgsm --enable- libmp3lame --enable-libopenjpeg --enable-libschroedinger --enable-libspeex --enable-libtheora --enable-libvorbis --enable-libvpx --enable-libx264 --enable-libxvid libavutil 55. 4.100 / 55. 4.100 libavcodec 57. 8.100 / 57. 8.100 libavformat 57. 10.101 / 57. 10.101 libavdevice 57. 0.100 / 57. 0.100 libavfilter 6. 12.100 / 6. 12.100 libswscale 4. 0.100 / 4. 0.100 libswresample 2. 0.100 / 2. 0.100 libpostproc 54. 0.100 / 54. 0.100 Input #0, mpegts, from 'ffmpeg_test_video.ts': Duration: 00:04:59.95, start: 1.450600, bitrate: 25138 kb/s Program 1 Metadata: service_name : Service01 service_provider: FFmpeg Stream #0:0[0x100]: Video: h264 (Main) ([27][0][0][0] / 0x001B), yuv420p, 1920x1080 [SAR 1:1 DAR 16:9], 25 fps, 50 tbr, 90k tbn, 50 tbc Stream #0:1[0x101]: Audio: aac (LC) ([15][0][0][0] / 0x000F), 48000 Hz, stereo, fltp, 127 kb/s [mov @ 0x34b9780] Codec for stream 0 does not use global headers but container format requires global headers Output #0, mov, to 'ffmpeg_test_video.mov': Metadata: encoder : Lavf57.10.101 Stream #0:0: Video: h264 (avc1 / 0x31637661), yuv420p, 1920x1080 [SAR 1:1 DAR 16:9], q=2-31, 25 fps, 50 tbr, 90k tbn, 90k tbc Stream #0:1: Audio: pcm_s24le (in24 / 0x34326E69), 48000 Hz, stereo, s32, 2304 kb/s Metadata: encoder : Lavc57.8.100 pcm_s24le Stream mapping: Stream #0:0 -> #0:0 (copy) Stream #0:1 -> #0:1 (aac (native) -> pcm_s24le (native)) Press [q] to stop, [?] for help frame=14955 fps= 95 q=-1.0 Lsize= 932056kB time=00:04:59.96 bitrate=25454.1kbits/s video:847498kB audio:84366kB subtitle:0kB other streams:0kB global headers:0kB muxing overhead: 0.020640% }}} I then use ffprobe on the finished file with the following output. {{{ ffprobe ffmpeg_test_video.mov ffprobe version N-76159-gda43e9e Copyright (c) 2007-2015 the FFmpeg developers built with gcc 4.9.2 (Debian 4.9.2-10) configuration: --enable-gpl --enable-version3 --enable-nonfree --enable- postproc --enable-x11grab --enable-libopencore-amrnb --enable-libopencore- amrwb --enable-libdc1394 --enable-libfaac --enable-libgsm --enable- libmp3lame --enable-libopenjpeg --enable-libschroedinger --enable-libspeex --enable-libtheora --enable-libvorbis --enable-libvpx --enable-libx264 --enable-libxvid libavutil 55. 4.100 / 55. 4.100 libavcodec 57. 8.100 / 57. 8.100 libavformat 57. 10.101 / 57. 10.101 libavdevice 57. 0.100 / 57. 0.100 libavfilter 6. 12.100 / 6. 12.100 libswscale 4. 0.100 / 4. 0.100 libswresample 2. 0.100 / 2. 0.100 libpostproc 54. 0.100 / 54. 0.100 Input #0, mov,mp4,m4a,3gp,3g2,mj2, from 'ffmpeg_test_video.mov': Metadata: major_brand : qt minor_version : 512 compatible_brands: qt encoder : Lavf57.10.101 Duration: 00:04:59.97, start: 0.000000, bitrate: 25454 kb/s Stream #0:0(eng): Video: h264 (Main) (avc1 / 0x31637661), yuv420p, 1920x1080 [SAR 1:1 DAR 16:9], 23211 kb/s, 50 fps, 50 tbr, 90k tbn, 50 tbc (default) Metadata: handler_name : DataHandler Stream #0:1(eng): Audio: pcm_s24le (in24 / 0x34326E69), 48000 Hz, stereo, s32 (24 bit), 2304 kb/s (default) Metadata: handler_name : DataHandler }}} As you can see the file is showing 50FPS although when I was running the first command it claimed that the file output is at 25FPS. The file I have used as the source is 900MB, just an FYI you would like me to upload it somewhere. Thanks -- Ticket URL: <https://trac.ffmpeg.org/ticket/4951#comment:8> FFmpeg <https://ffmpeg.org> FFmpeg issue tracker
#4951: Different frame rate using ts and mov containers -------------------------------------+------------------------------------- Reporter: liamf91 | Owner: Type: defect | Status: reopened Priority: normal | Component: Version: 2.8.1 | undetermined Keywords: h264 mov | Resolution: mpegts | Blocked By: Blocking: | Reproduced by developer: 0 Analyzed by developer: 0 | -------------------------------------+------------------------------------- Changes (by liamf91): * status: closed => reopened * resolution: needs_more_info => -- Ticket URL: <https://trac.ffmpeg.org/ticket/4951#comment:9> FFmpeg <https://ffmpeg.org> FFmpeg issue tracker
#4951: Different frame rate using ts and mov containers -------------------------------------+------------------------------------- Reporter: liamf91 | Owner: Type: defect | Status: reopened Priority: normal | Component: Version: 2.8.1 | undetermined Keywords: h264 mov | Resolution: mpegts | Blocked By: Blocking: | Reproduced by developer: 0 Analyzed by developer: 0 | -------------------------------------+------------------------------------- Comment (by cehoyos): How did you create the input file? -- Ticket URL: <https://trac.ffmpeg.org/ticket/4951#comment:10> FFmpeg <https://ffmpeg.org> FFmpeg issue tracker
#4951: Different frame rate using ts and mov containers -------------------------------------+------------------------------------- Reporter: liamf91 | Owner: Type: defect | Status: reopened Priority: normal | Component: Version: 2.8.1 | undetermined Keywords: h264 mov | Resolution: mpegts | Blocked By: Blocking: | Reproduced by developer: 0 Analyzed by developer: 0 | -------------------------------------+------------------------------------- Comment (by liamf91): The input file was created via a udp stream coming from a hardware encoder. The command i used was the following {{{ ffmpeg -i udp://230.100.1.1:1234 -vcodec copy -acodec copy -top 1 ffmpeg_test_video.ts }}} -- Ticket URL: <https://trac.ffmpeg.org/ticket/4951#comment:11> FFmpeg <https://ffmpeg.org> FFmpeg issue tracker
#4951: Different frame rate using ts and mov containers -------------------------------------+------------------------------------- Reporter: liamf91 | Owner: Type: defect | Status: reopened Priority: normal | Component: Version: 2.8.1 | undetermined Keywords: h264 mov | Resolution: mpegts | Blocked By: Blocking: | Reproduced by developer: 0 Analyzed by developer: 0 | -------------------------------------+------------------------------------- Comment (by cehoyos): (I am not sure this creates a valid stream, the mpegts muxer is known not to be perfect.) There are three possibilities (actually certainly more) to save the network stream: $ ffmpeg -f data -i udp://230.100.1.1:1234 -map 0 -codec copy -f data out1.ts $ mplayer udp://230.100.1.1:1234 -dumpstream $ tools/aviocat udp://230.100.1.1:1234 out3.ts You can build aviocat with {{{make tools/aviocat}}}. -- Ticket URL: <https://trac.ffmpeg.org/ticket/4951#comment:12> FFmpeg <https://ffmpeg.org> FFmpeg issue tracker
#4951: Different frame rate using ts and mov containers -------------------------------------+------------------------------------- Reporter: liamf91 | Owner: Type: defect | Status: reopened Priority: normal | Component: Version: git-master | undetermined Keywords: h264 mov | Resolution: mpegts | Blocked By: Blocking: | Reproduced by developer: 0 Analyzed by developer: 0 | -------------------------------------+------------------------------------- Changes (by cehoyos): * version: 2.8.1 => git-master -- Ticket URL: <https://trac.ffmpeg.org/ticket/4951#comment:13> FFmpeg <https://ffmpeg.org> FFmpeg issue tracker
#4951: Different frame rate using ts and mov containers -------------------------------------+------------------------------------- Reporter: liamf91 | Owner: Type: defect | Status: reopened Priority: normal | Component: Version: git-master | undetermined Keywords: h264 mov | Resolution: mpegts | Blocked By: Blocking: | Reproduced by developer: 0 Analyzed by developer: 0 | -------------------------------------+------------------------------------- Comment (by liamf91): I have used the first example you supplied to create a source file. After running the same command in my previous comment I am left with the same output. {{{ ffmpeg -i out1.ts -vcodec copy -acodec pcm_s24le -top 1 ffmpeg_test_video_1.mov ffmpeg version 2.6.3 Copyright (c) 2000-2015 the FFmpeg developers built with gcc 4.9.2 (Debian 4.9.2-10) configuration: --prefix=/usr --extra-cflags='-g -O2 -fstack-protector- strong -Wformat -Werror=format-security ' --extra-ldflags= '-Wl,-z,relro' --cc='ccache cc' --enable-shared --enable-libmp3lame --enable-gpl --enable-nonfree --enable-libvorbis --enable-pthr eads --enable-libfaac --enable-libxvid --enable-postproc --enable-x11grab --enable-libgsm --enable-libtheora --enable-libopencore- amrnb --enable-libopencore-amrwb --enable-libx264 --enable-libspeex --enable-nonfree --disable-stripping --enable-libvpx --enable- libschroedinger --disable-encoder=libschroedinger --enable-version3 --enable-libopenjpeg --enable-librtmp --enable-avfilter --enab le-libfreetype --enable-libvo-aacenc --disable-decoder=amrnb --enable- libvo-amrwbenc --enable-libaacplus --libdir=/usr/lib/x86_64- linux-gnu --disable-vda --enable-libbluray --enable-libcdio --enable- gnutls --enable-frei0r --enable-openssl --enable-libass --ena ble-libopus --enable-fontconfig --enable-libpulse --disable-mips32r2 --disable-mipsdspr1 --disable-mipsdspr2 --enable-libvidstab - -enable-libzvbi --enable-avresample --disable-htmlpages --disable-podpages --enable-libutvideo --enable-libfdk-aac --enable-libx26 5 --enable-libiec61883 --enable-vaapi --enable-libdc1394 --disable-altivec --shlibdir=/usr/lib/x86_64-linux-gnu libavutil 54. 20.100 / 54. 20.100 libavcodec 56. 26.100 / 56. 26.100 libavformat 56. 25.101 / 56. 25.101 libavdevice 56. 4.100 / 56. 4.100 libavfilter 5. 11.102 / 5. 11.102 libavresample 2. 1. 0 / 2. 1. 0 libswscale 3. 1.101 / 3. 1.101 libswresample 1. 1.100 / 1. 1.100 libpostproc 53. 3.100 / 53. 3.100 [h264 @ 0x1a05b00] non-existing PPS 0 referenced Last message repeated 1 times [h264 @ 0x1a05b00] decode_slice_header error [h264 @ 0x1a05b00] no frame! [h264 @ 0x1a05b00] non-existing PPS 0 referenced Last message repeated 1 times [h264 @ 0x1a05b00] decode_slice_header error [h264 @ 0x1a05b00] no frame! [h264 @ 0x1a05b00] non-existing PPS 0 referenced Last message repeated 1 times [h264 @ 0x1a05b00] decode_slice_header error [h264 @ 0x1a05b00] no frame! [h264 @ 0x1a05b00] non-existing PPS 0 referenced Last message repeated 1 times [h264 @ 0x1a05b00] decode_slice_header error [h264 @ 0x1a05b00] no frame! [h264 @ 0x1a05b00] non-existing PPS 0 referenced Last message repeated 1 times [h264 @ 0x1a05b00] decode_slice_header error [h264 @ 0x1a05b00] no frame! [h264 @ 0x1a05b00] non-existing PPS 0 referenced Last message repeated 1 times [h264 @ 0x1a05b00] decode_slice_header error [h264 @ 0x1a05b00] no frame! [h264 @ 0x1a05b00] non-existing PPS 0 referenced Last message repeated 1 times [h264 @ 0x1a05b00] decode_slice_header error [h264 @ 0x1a05b00] no frame! [h264 @ 0x1a05b00] non-existing PPS 0 referenced Last message repeated 1 times [h264 @ 0x1a05b00] decode_slice_header error [h264 @ 0x1a05b00] no frame! Input #0, mpegts, from 'out1.ts': Duration: 00:06:59.35, start: 64924.324611, bitrate: 24467 kb/s Program 1 Stream #0:0[0x21]: Video: h264 (Main) ([27][0][0][0] / 0x001B), yuv420p, 1920x1080 [SAR 1:1 DAR 16:9], 25 fps, 50 tbr, 90k tbn , 50 tbc Stream #0:1[0x24]: Audio: aac (LC) ([15][0][0][0] / 0x000F), 48000 Hz, stereo, fltp, 142 kb/s Output #0, mov, to 'ffmpeg_test_video_1.mov': Metadata: encoder : Lavf56.25.101 Stream #0:0: Video: h264 (avc1 / 0x31637661), yuv420p, 1920x1080 [SAR 1:1 DAR 16:9], q=2-31, 25 fps, 50 tbr, 90k tbn, 90k tbc Stream #0:1: Audio: pcm_s24le (in24 / 0x34326E69), 48000 Hz, stereo, s32, 2304 kb/s Metadata: encoder : Lavc56.26.100 pcm_s24le Stream mapping: Stream #0:0 -> #0:0 (copy) Stream #0:1 -> #0:1 (aac (native) -> pcm_s24le (native)) Press [q] to stop, [?] for help frame=20957 fps=7217 q=-1.0 Lsize= 1332132kB time=00:06:59.35 bitrate=26023.2kbits/s video:1213927kB audio:117936kB subtitle:0kB other streams:0kB global headers:0kB muxing overhead: 0.020201% }}} This is a probe of the output file {{{ ffprobe ffmpeg_test_video_1.mov ffprobe version 2.6.3 Copyright (c) 2007-2015 the FFmpeg developers built with gcc 4.9.2 (Debian 4.9.2-10) configuration: --prefix=/usr --extra-cflags='-g -O2 -fstack-protector- strong -Wformat -Werror=format-security ' --extra-ldflags= '-Wl,-z,relro' --cc='ccache cc' --enable-shared --enable-libmp3lame --enable-gpl --enable-nonfree --enable-libvorbis --enable-pthr eads --enable-libfaac --enable-libxvid --enable-postproc --enable-x11grab --enable-libgsm --enable-libtheora --enable-libopencore- amrnb --enable-libopencore-amrwb --enable-libx264 --enable-libspeex --enable-nonfree --disable-stripping --enable-libvpx --enable- libschroedinger --disable-encoder=libschroedinger --enable-version3 --enable-libopenjpeg --enable-librtmp --enable-avfilter --enab le-libfreetype --enable-libvo-aacenc --disable-decoder=amrnb --enable- libvo-amrwbenc --enable-libaacplus --libdir=/usr/lib/x86_64- linux-gnu --disable-vda --enable-libbluray --enable-libcdio --enable- gnutls --enable-frei0r --enable-openssl --enable-libass --ena ble-libopus --enable-fontconfig --enable-libpulse --disable-mips32r2 --disable-mipsdspr1 --disable-mipsdspr2 --enable-libvidstab - -enable-libzvbi --enable-avresample --disable-htmlpages --disable-podpages --enable-libutvideo --enable-libfdk-aac --enable-libx26 5 --enable-libiec61883 --enable-vaapi --enable-libdc1394 --disable-altivec --shlibdir=/usr/lib/x86_64-linux-gnu libavutil 54. 20.100 / 54. 20.100 libavcodec 56. 26.100 / 56. 26.100 libavformat 56. 25.101 / 56. 25.101 libavdevice 56. 4.100 / 56. 4.100 libavfilter 5. 11.102 / 5. 11.102 libavresample 2. 1. 0 / 2. 1. 0 libswscale 3. 1.101 / 3. 1.101 libswresample 1. 1.100 / 1. 1.100 libpostproc 53. 3.100 / 53. 3.100 Input #0, mov,mp4,m4a,3gp,3g2,mj2, from 'ffmpeg_test_video_1.mov': Metadata: major_brand : qt minor_version : 512 compatible_brands: qt encoder : Lavf56.25.101 Duration: 00:06:59.33, start: 0.022000, bitrate: 26024 kb/s Stream #0:0(eng): Video: h264 (Main) (avc1 / 0x31637661), yuv420p, 1920x1080 [SAR 1:1 DAR 16:9], 23725 kb/s, 50 fps, 50 tbr, 9 0k tbn, 50 tbc (default) Metadata: handler_name : DataHandler Stream #0:1(eng): Audio: pcm_s24le (in24 / 0x34326E69), 48000 Hz, stereo, s32 (24 bit), 2304 kb/s (default) Metadata: handler_name : DataHandler }}} -- Ticket URL: <https://trac.ffmpeg.org/ticket/4951#comment:14> FFmpeg <https://ffmpeg.org> FFmpeg issue tracker
#4951: Different frame rate using ts and mov containers -------------------------------------+------------------------------------- Reporter: liamf91 | Owner: Type: defect | Status: reopened Priority: normal | Component: Version: git-master | undetermined Keywords: h264 mov | Resolution: mpegts | Blocked By: Blocking: | Reproduced by developer: 0 Analyzed by developer: 0 | -------------------------------------+------------------------------------- Comment (by cehoyos): Replying to [comment:14 liamf91]:
{{{ ffmpeg -i out1.ts -vcodec copy -acodec pcm_s24le -top 1 ffmpeg_test_video_1.mov ffmpeg version 2.6.3 Copyright (c) 2000-2015 the FFmpeg developers }}}
So the issue is not reproducible with current FFmpeg git head? Anyway: Please upload 20MB or so of the input transport stream (or more if you want). -- Ticket URL: <https://trac.ffmpeg.org/ticket/4951#comment:15> FFmpeg <https://ffmpeg.org> FFmpeg issue tracker
#4951: Different frame rate using ts and mov containers -------------------------------------+------------------------------------- Reporter: liamf91 | Owner: Type: defect | Status: reopened Priority: normal | Component: Version: git-master | undetermined Keywords: h264 mov | Resolution: mpegts | Blocked By: Blocking: | Reproduced by developer: 0 Analyzed by developer: 0 | -------------------------------------+------------------------------------- Comment (by liamf91): Sorry, I did it on a different server. I've just ran it again and I've had the same outcome. I've uploaded the full file. If you would like me to cut it down I will do (it's 1.3GB) https://drive.google.com/file/d/0B9ptbF3j- FOjblM4bzc4YWp5MGc/view?usp=sharing -- Ticket URL: <https://trac.ffmpeg.org/ticket/4951#comment:16> FFmpeg <https://ffmpeg.org> FFmpeg issue tracker
#4951: Different frame rate using ts and mov containers -------------------------------------+------------------------------------- Reporter: liamf91 | Owner: Type: defect | Status: reopened Priority: normal | Component: Version: git-master | undetermined Keywords: h264 mov | Resolution: mpegts | Blocked By: Blocking: | Reproduced by developer: 0 Analyzed by developer: 0 | -------------------------------------+------------------------------------- Comment (by liamf91): Something I have noticed with this is that if i change the source to be progressive rather than interlaced the correct frame rate is shown. -- Ticket URL: <https://trac.ffmpeg.org/ticket/4951#comment:17> FFmpeg <https://ffmpeg.org> FFmpeg issue tracker
participants (1)
-
FFmpeg