February 2015 - ffmpeg-user - lists.ffmpeg.org

Failed to resolve hostname: Ubuntu static builds
by hdn8 03 Mar '18

03 Mar '18

Using the binaries from http://johnvansickle.com/ I get an error when using a http input, "failed to resolve hostname": (using ffprobe, but also with ffmpeg): ffprobe version N-41351-g676110e- http://johnvansickle.com/ffmpeg/ Copyright (c) 2007-2014 the FFmpeg developers built on Oct 15 2014 01:22:19 with gcc 4.8 (Debian 4.8.3-11) configuration: --enable-gpl --enable-version3 --disable-shared --disable-debug --enable-runtime-cpudetect --enable-libmp3lame --enable-libx264 --enable-libx265 --enable-libwebp --enable-libspeex --enable-libvorbis --enable-libvpx --enable-libfreetype --enable-fontconfig --enable-libxvid --enable-libopencore-amrnb --enable-libopencore-amrwb --enable-libtheora --enable-libvo-aacenc --enable-libvo-amrwbenc --enable-gray --enable-libopenjpeg --enable-libopus --disable-ffserver --enable-libass --enable-gnutls --cc=gcc-4.8 libavutil 54. 10.100 / 54. 10.100 libavcodec 56. 5.100 / 56. 5.100 libavformat 56. 9.100 / 56. 9.100 libavdevice 56. 1.100 / 56. 1.100 libavfilter 5. 1.106 / 5. 1.106 libswscale 3. 1.101 / 3. 1.101 libswresample 1. 1.100 / 1. 1.100 libpostproc 53. 3.100 / 53. 3.100 [tcp @ 0x3f82100] Failed to resolve hostname mirrorblender.top-ix.org: Name or service not known http://mirrorblender.top-ix.org/peach/bigbuckbunny_movies/big_buck_bunny_48…: Input/output error Note I have tried with various http sources/hosts, all same result. Using the builds from ffmpeg.gusari.org it works fine: ffprobe version N-63893-gc69defd Copyright (c) 2007-2014 the FFmpeg developers built on Jul 16 2014 05:38:01 with gcc 4.6 (Debian 4.6.3-1) configuration: --prefix=/root/ffmpeg-static/64bit --extra-cflags='-I/root/ffmpeg-static/64bit/include -static' --extra-ldflags='-L/root/ffmpeg-static/64bit/lib -static' --extra-libs='-lxml2 -lexpat -lfreetype' --enable-static --disable-shared --disable-ffserver --disable-doc --enable-bzlib --enable-zlib --enable-postproc --enable-runtime-cpudetect --enable-libx264 --enable-gpl --enable-libtheora --enable-libvorbis --enable-libmp3lame --enable-gray --enable-libass --enable-libfreetype --enable-libopenjpeg --enable-libspeex --enable-libvo-aacenc --enable-libvo-amrwbenc --enable-version3 --enable-libvpx libavutil 52. 89.100 / 52. 89.100 libavcodec 55. 66.101 / 55. 66.101 libavformat 55. 43.100 / 55. 43.100 libavdevice 55. 13.101 / 55. 13.101 libavfilter 4. 8.100 / 4. 8.100 libswscale 2. 6.100 / 2. 6.100 libswresample 0. 19.100 / 0. 19.100 libpostproc 52. 3.100 / 52. 3.100 Input #0, mov,mp4,m4a,3gp,3g2,mj2, from 'http://mirrorblender.top-ix.org/peach/bigbuckbunny_movies/big_buck_bunny_48…': Metadata: major_brand : qt minor_version : 537199360 compatible_brands: qt creation_time : 2008-05-27 18:32:32 timecode : 00:00:00:00 Duration: 00:09:56.46, start: 0.000000, bitrate: 3342 kb/s Stream #0:0(eng): Video: h264 (Main) (avc1 / 0x31637661), yuv420p(tv, bt709), 854x480, 2899 kb/s, 24 fps, 24 tbr, 2400 tbn, 4800 tbc (default) Metadata: creation_time : 2008-05-27 18:32:32 handler_name : Apple Alias Data Handler encoder : H.264 Stream #0:1(eng): Data: none (tmcd / 0x64636D74) (default) Metadata: creation_time : 2008-05-27 18:32:32 handler_name : Apple Alias Data Handler timecode : 00:00:00:00 Stream #0:2(eng): Audio: aac (mp4a / 0x6134706D), 48000 Hz, 5.1, fltp, 437 kb/s (default) Metadata: creation_time : 2008-05-27 18:32:32 handler_name : Apple Alias Data Handler The error from http://johnvansickle.com/ffmpeg/ is the same for the nightly and version 2.4. The gusari.org binaries havent been built since July 16, for now I am using ffprobe from gusari for http sources and for file sources johnvansickle. From where are you getting your (supposedly stable) binaries? Ubuntu x86_64 GNU/Linux -- View this message in context: http://ffmpeg-users.933282.n4.nabble.com/Failed-to-resolve-hostname-Ubuntu-… Sent from the FFmpeg-users mailing list archive at Nabble.com.

3 3

Adding user-defined SEI messages thru libavcodec/libx264
by SF 06 Jan '18

06 Jan '18

Hi, I am searching a way to insert private SEI messages before each picture when encoding with x264. As far as i see from the libx264.c code, it is not supported up to now. Am i correct ? If yes, i am willing to push patch to support this, but do you have a preferred way to do this (ie thru medata field of AVFrame ? thru sidedata of AVFrame ? ...) Thanks for your hints, Regards, SF

2 1

Syncing clips based on audio waveform?
by Arthur Wait 05 Oct '17

05 Oct '17

Hi all, This is coming from out of left field I imagine, but I'm wondering if anyone knows of a filter (or chain of filters) which would allow me to align/sync two video clips based on matches in their audio waveforms. I'm shooting events with multiple cameras and would like to either trim the clips to a precise, matching starting frame or generate a metadata "offset" marker indicating how far off one clip is from the other in time. Then I can trim the clips to match. Is this possible in ffmpeg (or anywhere else for that matter!)? Thanks very much! Art

7 7

could not find codec parameters for stream 0 unspecified size
by Ashish Lal 09 Aug '17

09 Aug '17

I am trying to convert a live rtsp stream (H264 + MPEG2 TS ) into MP4 using ffmpeg. I am getting an error "could not find codec parameters for stream 0 unspecified size". Any help in fixing this is appreciated. ffmpeg -rtsp_transport tcp -i rtsp://AA.BB.CC.DD:5555/mpeg2TransportStreamFr omUDPSourceTest -analyzeduration 999999999 -probesize 99999999 -vcodec libx264 -s 176x144 -b:v 256k -f mp4 -movflags frag_keyframe+empty_moov op.mp4 ffmpeg version 2.2.2 Copyright (c) 2000-2014 the FFmpeg developers built on May 27 2014 09:12:51 with gcc 4.7 (Debian 4.7.2-5) configuration: --enable-libx264 --enable-encoder=libx264 --enable-libvpx --pre fix=/home/ashish/ffmpeg-2.2.2/mybuild --enable-gpl --enable-debug --disable-stri pping --disable-optimizations --enable-memalign-hack libavutil 52. 66.100 / 52. 66.100 libavcodec 55. 52.102 / 55. 52.102 libavformat 55. 33.100 / 55. 33.100 libavdevice 55. 10.100 / 55. 10.100 libavfilter 4. 2.100 / 4. 2.100 libswscale 2. 5.102 / 2. 5.102 libswresample 0. 18.100 / 0. 18.100 libpostproc 52. 3.100 / 52. 3.100 [NULL @ 0x235cd60] non-existing PPS 0 referenced [h264 @ 0x235cd60] non-existing PPS 0 referenced [h264 @ 0x235cd60] decode_slice_header error [h264 @ 0x235cd60] no frame! [h264 @ 0x235cd60] non-existing PPS 0 referenced ......... ......... Last message repeated 1 times [h264 @ 0x235cd60] decode_slice_header error [h264 @ 0x235cd60] no frame! [h264 @ 0x235cd60] non-existing PPS 0 referenced [rtsp @ 0x232fc40] decoding for stream 0 failed [rtsp @ 0x232fc40] Could not find codec parameters for stream 0 (Video: h264 ([2 7][0][0][0] / 0x001B)): unspecified size Consider increasing the value for the 'analyzeduration' and 'probesize' options rtsp://AA.BB.CC.DD:5555/mpeg2TransportStreamFromUDPSourceTest: could not find codec parameters Conversion failed! Regards Ashish

3 3

Compiling FFMPEG with ffplay support
by Stas Oskin 13 Jun '17

13 Jun '17

Hi. Did the compilation parameters changed in recent FFMPEG version? Configuring the FFMPEG like this: ./configure --prefix=/usr --enable-pthreads Does not produce ffplay anymore. I tried to add --enable-ffplay, without any result. Any idea what I'm missing? Thanks.

6 9

How do I encode DVB Subtitles?
by Wagner Patriota 02 May '17

02 May '17

*QUESTION 1:* How do I add a STR file to a MPEG-TS file with the "DVB subtitle codec"? If so, could you give me a sample command line? Thank. I am trying: ffmpeg -i video.ts *-i subtitle.srt* -vcodec copy -acodec copy *-scodec dvbsub* output.ts The stream is created because I can see it with MediaInfo, but the subtitles don't appear! *QUESTION 2:* How do I use the command *slang*? I try to use it, but ffmpeg says the command doesn't exist. Thank you.

7 15

How to use global_header, fflags, rtpflags parameter.
by Ly Tran Cong 06 Dec '16

06 Dec '16

Hello, Can anyone tell me how to use flags +global_header, fflags +latm, rtpflags +latm Which parameter using with video encode and which parameter using with audio encode. Thanks -- Regards, Tran Ly Vega Corporation 98 Hoang Quoc Viet Str, Hanoi, Vietnam Tel: 84 4 755 4190 Fax: 84 4 755 4190 Mobile: 84 91 487 1115 www.vega.com.vn; www.clip.vn; www.chacha.vn; www.ringring.vn

2 1

Flip in sws_scale
by romulo.fernandes＠gmail.com 11 Mar '16

11 Mar '16

Hello, I'm using libswscale to scale and convert pixel format from frames that I capture from the screen. In my windows build the frames that I capture are in DIB format. I'm using FFMPEG SVN rev 16437. Calling sws_scale normally I get the image correctly, except that it's vertically flipped. If I change the srcSliceY from 0 to srcHeight and srcSliceH from srcHeight to 0, I get a grey image (with correct dimensions). If I keep the srcSliceY in 0 and change srcSliceH from srcHeight to -srcHeight, I also get that grey image. Is there a way to make sws_scale flip the image for me ?

8 11

Howto compile ffplay.c in seperate directory with my own svn-version of ffmpeg
by tps＠netmaster.dk 23 Feb '16

23 Feb '16

Dear All I have compiled svn-version of ffmpeg. I only do configure and make. I do not do make install because I don't want this svn-version of ffmpeg to overwrite the 'official' Ubuntu version of ffpeg that is also on the host. Now I want to compile my own version of ffplay.c so I create a directory ffplay at the same level as the svn ffmpeg-directory. I copy ffplay.c from ffmpeg to ffplay. Now what gcc options should I use to compile ffplay.c? I tried with this but got tons of errors: gcc -o ffplay ffplay.c -I../ffmpeg -L../ffmpeg/libavcodec -L../ffmpeg/libavformt -L../ffmpeg/libswscale -L../ffmpeg/libavutil -lavcodec -lavformat -lswscale -lavutil -lmp3lame -lx264 `sdl-config --cflags --libs` I note that when I do the make in the svn ffmpeg-directory there are a lot of options on the gcc command. I hardly know any of the options. Thanks in advance

5 5

RTMP output - "Past duration too large"
by Matt Conway 26 Jan '16

26 Jan '16

I'm trying to use ffmpeg to livestream to an online service such as ustream. This is the command I am using - ffmpeg -i rtsp://RTSPStreamUrl -an -f avi rtmp://RTMPStreamUrl It keeps returning a long list of errors all saying "Past duration X.XXXXXX too large", the number is changing however, increasing the longer I leave the stream running. Is this because the frames in my stream are too large? What can I do to stop this from happening. Here is a screenshot of the output. [image: Inline image 1]

4 8