FFmpeg
|
Modules | |
Frame parsing | |
Macros | |
#define | FF_INPUT_BUFFER_PADDING_SIZE 16 |
Required number of additionally allocated bytes at the end of the input bitstream for decoding. | |
Enumerations | |
enum | AVDiscard { AVDISCARD_NONE =-16, AVDISCARD_DEFAULT = 0, AVDISCARD_NONREF = 8, AVDISCARD_BIDIR = 16, AVDISCARD_NONKEY = 32, AVDISCARD_ALL = 48 } |
Functions | |
AVCodec * | avcodec_find_decoder (enum AVCodecID id) |
Find a registered decoder with a matching codec ID. | |
AVCodec * | avcodec_find_decoder_by_name (const char *name) |
Find a registered decoder with the specified name. | |
int | avcodec_default_get_buffer2 (AVCodecContext *s, AVFrame *frame, int flags) |
The default callback for AVCodecContext.get_buffer2(). | |
unsigned | avcodec_get_edge_width (void) |
Return the amount of padding in pixels which the get_buffer callback must provide around the edge of the image for codecs which do not have the CODEC_FLAG_EMU_EDGE flag. | |
void | avcodec_align_dimensions (AVCodecContext *s, int *width, int *height) |
Modify width and height values so that they will result in a memory buffer that is acceptable for the codec if you do not use any horizontal padding. | |
void | avcodec_align_dimensions2 (AVCodecContext *s, int *width, int *height, int linesize_align[AV_NUM_DATA_POINTERS]) |
Modify width and height values so that they will result in a memory buffer that is acceptable for the codec if you also ensure that all line sizes are a multiple of the respective linesize_align[i]. | |
int | avcodec_decode_audio4 (AVCodecContext *avctx, AVFrame *frame, int *got_frame_ptr, const AVPacket *avpkt) |
Decode the audio frame of size avpkt->size from avpkt->data into frame. | |
int | avcodec_decode_video2 (AVCodecContext *avctx, AVFrame *picture, int *got_picture_ptr, const AVPacket *avpkt) |
Decode the video frame of size avpkt->size from avpkt->data into picture. | |
int | avcodec_decode_subtitle2 (AVCodecContext *avctx, AVSubtitle *sub, int *got_sub_ptr, AVPacket *avpkt) |
Decode a subtitle message. | |
#define FF_INPUT_BUFFER_PADDING_SIZE 16 |
Required number of additionally allocated bytes at the end of the input bitstream for decoding.
This is mainly needed because some optimized bitstream readers read 32 or 64 bit at once and could read over the end.
Note: If the first 23 bits of the additional bytes are not 0, then damaged MPEG bitstreams could cause overread and segfault.
Definition at line 569 of file avcodec.h.
Referenced by a64multi_init_encoder(), aac_adtstoasc_filter(), aac_decode_frame(), aac_encode_init(), aacPlus_encode_init(), add_av_stream1(), adpcm_encode_init(), adx_read_header(), afc_read_header(), aiff_read_header(), alac_encode_init(), alloc_and_copy(), alloc_buffers(), apc_read_header(), ape_tag_read_field(), asf_parse_packet(), asf_read_stream_properties(), atrac3_decode_init(), audio_decode_example(), av_fast_padded_malloc(), av_fast_padded_mallocz(), av_grow_packet(), av_new_packet(), av_packet_from_data(), av_packet_merge_side_data(), av_packet_new_side_data(), av_packet_split_side_data(), av_parser_change(), av_parser_parse2(), av_shrink_packet(), avcodec_copy_context(), avcodec_encode_audio2(), avcodec_encode_video2(), avformat_find_stream_info(), avi_read_header(), avio_close_dyn_buf(), avui_encode_init(), cdxl_decode_frame(), celt_header(), cook_decode_init(), dca_parse_params(), decode_frame(), decode_i_frame(), decode_init(), decode_p_frame(), decode_plane(), decode_stream_header(), dshow_add_device(), dump_extradata(), dv_decode_video_segment(), encode_init(), extract_header(), extract_mpeg4_header(), Faac_encode_init(), ff_alloc_packet2(), ff_combine_frame(), ff_generate_avci_extradata(), ff_h263_decode_frame(), ff_h264_decode_nal(), ff_id3v2_parse_apic(), ff_mjpeg_find_marker(), ff_mp4_read_dec_config_descr(), ff_mpeg_update_thread_context(), ff_parse_mpeg2_descriptor(), fixup_vorbis_headers(), flac_header(), flac_read_header(), flic_decode_frame_8BPP(), flv_get_extradata(), flv_queue_extradata(), flv_set_video_codec(), g2m_init_buffers(), h264_extradata_to_annexb(), h264_mp4toannexb_filter(), h264_new_context(), handle_packets(), iff_read_header(), imx_dump_header(), jacosub_read_header(), jpg_decode_data(), latm_decode_audio_specific_config(), libopus_encode_init(), mjpega_dump_header(), mov2textsub(), mov_read_dvc1(), mov_read_extradata(), mov_read_glbl(), mov_read_strf(), mov_read_stsz(), mov_read_wave(), mov_write_dvc1_structs(), mp3_header_compress(), mp3_header_decompress(), mp_decode_frame(), mpc8_parse_seektable(), mpc8_read_header(), mpc_read_header(), mpegts_push_data(), mss2_decode_frame(), mxf_parse_structural_metadata(), mxg_update_cache(), new_pes_packet(), noise(), ogg_new_buf(), ogg_new_stream(), ogg_read_page(), ogg_save(), oggvorbis_encode_init(), ogm_header(), oma_read_header(), opus_header(), parse_fmtp_config(), parse_packed_headers(), pcx_decode_frame(), qdm2_parse_config(), qt_rtp_parse_packet(), rdt_parse_b64buf(), read_apic(), read_header(), read_kuki_chunk(), recode_subtitle(), redspark_read_header(), rl2_read_header(), rm_read_audio_stream_info(), rm_read_extradata(), sdp_parse_fmtp_config_h264(), shorten_decode_frame(), smacker_read_header(), smush_read_header(), spdif_write_packet(), speex_header(), Stagefright_init(), submit_packet(), svq3_decode_frame(), svq3_parse_packet(), tak_read_header(), text2movsub(), theora_header(), tiff_unpack_fax(), transcode_init(), tta_read_header(), utvideo_encode_frame(), utvideo_encode_init(), vc1_decode_frame(), vc1_decode_init(), vc1_extract_headers(), vfw_read_header(), video_decode_example(), vmd_read_header(), vqf_read_header(), wma_decode_superframe(), write_frame(), wsvqa_read_header(), wsvqa_read_packet(), wv_get_value_float(), xmv_process_packet_header(), xwma_read_header(), and yop_read_header().
enum AVDiscard |
Find a registered decoder with a matching codec ID.
id | AVCodecID of the requested decoder |
Definition at line 2454 of file utils.c.
Referenced by add_input_streams(), audio_decode_example(), av_find_best_stream(), avcodec_get_name(), avcodec_get_type(), avcodec_open2(), avcodec_string(), avformat_find_stream_info(), choose_decoder(), dshow_cycle_formats(), ff_load_image(), filter_codec_opts(), find_codec_or_die(), list_formats(), open_codec_context(), open_input_file(), open_stream(), show_codecs(), smvjpeg_decode_init(), stream_component_open(), try_decode_frame(), and video_decode_example().
AVCodec* avcodec_find_decoder_by_name | ( | const char * | name | ) |
Find a registered decoder with the specified name.
name | name of the requested decoder |
Definition at line 2459 of file utils.c.
Referenced by find_codec_or_die(), show_help_codec(), stream_component_open(), and v4l2_read_header().
int avcodec_default_get_buffer2 | ( | AVCodecContext * | s, |
AVFrame * | frame, | ||
int | flags | ||
) |
The default callback for AVCodecContext.get_buffer2().
It is made public so it can be called by custom get_buffer2() implementations for decoders without CODEC_CAP_DR1 set.
Definition at line 602 of file utils.c.
Referenced by alloc_frame_buffer(), avcodec_get_context_defaults3(), ff_thread_release_buffer(), submit_packet(), and thread_get_buffer_internal().
unsigned avcodec_get_edge_width | ( | void | ) |
void avcodec_align_dimensions | ( | AVCodecContext * | s, |
int * | width, | ||
int * | height | ||
) |
Modify width and height values so that they will result in a memory buffer that is acceptable for the codec if you do not use any horizontal padding.
May only be used if a codec with CODEC_CAP_DR1 has been opened. If CODEC_FLAG_EMU_EDGE is not set, the dimensions must have been increased according to avcodec_get_edge_width() before.
void avcodec_align_dimensions2 | ( | AVCodecContext * | s, |
int * | width, | ||
int * | height, | ||
int | linesize_align[AV_NUM_DATA_POINTERS] | ||
) |
Modify width and height values so that they will result in a memory buffer that is acceptable for the codec if you also ensure that all line sizes are a multiple of the respective linesize_align[i].
May only be used if a codec with CODEC_CAP_DR1 has been opened. If CODEC_FLAG_EMU_EDGE is not set, the dimensions must have been increased according to avcodec_get_edge_width() before.
Definition at line 192 of file utils.c.
Referenced by avcodec_align_dimensions(), and update_frame_pool().
int avcodec_decode_audio4 | ( | AVCodecContext * | avctx, |
AVFrame * | frame, | ||
int * | got_frame_ptr, | ||
const AVPacket * | avpkt | ||
) |
Decode the audio frame of size avpkt->size from avpkt->data into frame.
Some decoders may support multiple frames in a single AVPacket. Such decoders would then just decode the first frame. In this case, avcodec_decode_audio4 has to be called again with an AVPacket containing the remaining data in order to decode the second frame, etc... Even if no frames are returned, the packet needs to be fed to the decoder with remaining data until it is completely consumed or an error occurs.
avctx | the codec context | |
[out] | frame | The AVFrame in which to store decoded audio samples. The decoder will allocate a buffer for the decoded frame by calling the AVCodecContext.get_buffer2() callback. When AVCodecContext.refcounted_frames is set to 1, the frame is reference counted and the returned reference belongs to the caller. The caller must release the frame using av_frame_unref() when the frame is no longer needed. The caller may safely write to the frame if av_frame_is_writable() returns 1. When AVCodecContext.refcounted_frames is set to 0, the returned reference belongs to the decoder and is valid only until the next call to this function or until closing the decoder. The caller may not write to it. |
[out] | got_frame_ptr | Zero if no frame could be decoded, otherwise it is non-zero. |
[in] | avpkt | The input AVPacket containing the input buffer. At least avpkt->data and avpkt->size should be set. Some decoders might also require additional fields to be set. |
Definition at line 2049 of file utils.c.
Referenced by audio_decode_example(), audio_decode_frame(), decode_audio(), decode_packet(), main(), movie_push_frame(), process_frame(), try_decode_frame(), and wrap().
int avcodec_decode_video2 | ( | AVCodecContext * | avctx, |
AVFrame * | picture, | ||
int * | got_picture_ptr, | ||
const AVPacket * | avpkt | ||
) |
Decode the video frame of size avpkt->size from avpkt->data into picture.
Some decoders may support multiple frames in a single AVPacket, such decoders would then just decode the first frame.
In practice, avpkt->data should have 4 byte alignment at minimum.
avctx | the codec context | |
[out] | picture | The AVFrame in which the decoded video frame will be stored. Use av_frame_alloc() to get an AVFrame. The codec will allocate memory for the actual bitmap by calling the AVCodecContext.get_buffer2() callback. When AVCodecContext.refcounted_frames is set to 1, the frame is reference counted and the returned reference belongs to the caller. The caller must release the frame using av_frame_unref() when the frame is no longer needed. The caller may safely write to the frame if av_frame_is_writable() returns 1. When AVCodecContext.refcounted_frames is set to 0, the returned reference belongs to the decoder and is valid only until the next call to this function or until closing the decoder. The caller may not write to it. |
[in] | avpkt | The input AVpacket containing the input buffer. You can create such packet with av_init_packet() and by then setting data and size, some decoders might in addition need other fields like flags&AV_PKT_FLAG_KEY. All decoders are designed to use the least fields possible. |
[in,out] | got_picture_ptr | Zero if no frame could be decompressed, otherwise, it is nonzero. |
Definition at line 1914 of file utils.c.
Referenced by decode_packet(), decode_video(), decode_write_frame(), ff_load_image(), get_video_frame(), main(), movie_push_frame(), process_frame(), smvjpeg_decode_frame(), try_decode_frame(), and wrap().
int avcodec_decode_subtitle2 | ( | AVCodecContext * | avctx, |
AVSubtitle * | sub, | ||
int * | got_sub_ptr, | ||
AVPacket * | avpkt | ||
) |
Decode a subtitle message.
Return a negative value on error, otherwise return the number of bytes used. If no subtitle could be decompressed, got_sub_ptr is zero. Otherwise, the subtitle is stored in *sub. Note that CODEC_CAP_DR1 is not available for subtitle codecs. This is for simplicity, because the performance difference is expect to be negligible and reusing a get_buffer written for video codecs would probably perform badly due to a potentially very different allocation pattern.
avctx | the codec context | |
[out] | sub | The AVSubtitle in which the decoded subtitle will be stored, must be freed with avsubtitle_free if *got_sub_ptr is set. |
[in,out] | got_sub_ptr | Zero if no subtitle could be decompressed, otherwise, it is nonzero. |
[in] | avpkt | The input AVPacket containing the input buffer. |
Definition at line 2254 of file utils.c.
Referenced by subtitle_thread(), transcode_subtitles(), try_decode_frame(), and wrap().