#include <stdint.h>
#include "libavutil/channel_layout.h"

Data Structures
struct	FilterParams
	filter data More...

struct	ChannelParams
	sample data coding information More...

struct	ChannelInformation

Macros
#define	SYNC_MLP 0xbb

#define	SYNC_TRUEHD 0xba

#define	MAX_MATRIX_CHANNEL_MLP 5
	Last possible matrix channel for each codec. More...

#define	MAX_MATRIX_CHANNEL_TRUEHD 7

#define	MAX_CHANNELS 8
	Maximum number of channels in a valid stream. More...

#define	MAX_MATRICES_MLP 6
	Maximum number of matrices used in decoding; most streams have one matrix per output channel, but some rematrix a channel (usually 0) more than once. More...

#define	MAX_MATRICES_TRUEHD 8

#define	MAX_MATRICES 8

#define	MAX_SUBSTREAMS 4
	Maximum number of substreams that can be decoded. More...

#define	MAX_RATEFACTOR 4
	which multiple of 48000 the maximum sample rate is More...

#define	MAX_SAMPLERATE (MAX_RATEFACTOR * 48000)
	maximum sample frequency seen in files More...

#define	MAX_BLOCKSIZE (40 * MAX_RATEFACTOR)
	maximum number of audio samples within one access unit More...

#define	MAX_BLOCKSIZE_POW2 (64 * MAX_RATEFACTOR)
	next power of two greater than MAX_BLOCKSIZE More...

#define	NUM_FILTERS 2
	number of allowed filters More...

#define	MAX_FIR_ORDER 8
	The maximum number of taps in IIR and FIR filters. More...

#define	MAX_IIR_ORDER 4

#define	END_OF_STREAM 0xd234d234
	Code that signals end of a stream. More...

#define	PARAM_BLOCKSIZE (1 << 7)

#define	PARAM_MATRIX (1 << 6)

#define	PARAM_OUTSHIFT (1 << 5)

#define	PARAM_QUANTSTEP (1 << 4)

#define	PARAM_FIR (1 << 3)

#define	PARAM_IIR (1 << 2)

#define	PARAM_HUFFOFFSET (1 << 1)

#define	PARAM_PRESENCE (1 << 0)

#define	FIR 0

#define	IIR 1

Enumerations
enum	THDChannelModifier { THD_CH_MODIFIER_NOTINDICATED = 0x0, THD_CH_MODIFIER_STEREO = 0x0, THD_CH_MODIFIER_LTRT = 0x1, THD_CH_MODIFIER_LBINRBIN = 0x2, THD_CH_MODIFIER_MONO = 0x3, THD_CH_MODIFIER_NOTSURROUNDEX = 0x1, THD_CH_MODIFIER_SURROUNDEX = 0x2 }

Functions
uint8_t	ff_mlp_checksum8 (const uint8_t *buf, unsigned int buf_size)
	MLP uses checksums that seem to be based on the standard CRC algorithm, but are not (in implementation terms, the table lookup and XOR are reversed). More...

uint16_t	ff_mlp_checksum16 (const uint8_t *buf, unsigned int buf_size)

uint8_t	ff_mlp_restart_checksum (const uint8_t *buf, unsigned int bit_size)
	Calculate an 8-bit checksum over a restart header – a non-multiple-of-8 number of bits, starting two bits into the first byte of buf. More...

uint8_t	ff_mlp_calculate_parity (const uint8_t *buf, unsigned int buf_size)
	XOR together all the bytes of a buffer. More...

void	ff_mlp_init_crc (void)

static uint8_t	xor_32_to_8 (uint32_t value)
	XOR four bytes into one. More...

Variables
const uint8_t	ff_mlp_huffman_tables [3][18][2]
	Tables defining the Huffman codes. More...

const ChannelInformation	ff_mlp_ch_info [21]
	Tables defining channel information. More...

const AVChannelLayout	ff_mlp_ch_layouts [12]

Macro Definition Documentation

◆ SYNC_MLP

#define SYNC_MLP 0xbb

Definition at line 29 of file mlp.h.

◆ SYNC_TRUEHD

#define SYNC_TRUEHD 0xba

Definition at line 30 of file mlp.h.

◆ MAX_MATRIX_CHANNEL_MLP

#define MAX_MATRIX_CHANNEL_MLP 5

Last possible matrix channel for each codec.

Definition at line 33 of file mlp.h.

◆ MAX_MATRIX_CHANNEL_TRUEHD

#define MAX_MATRIX_CHANNEL_TRUEHD 7

Definition at line 34 of file mlp.h.

◆ MAX_CHANNELS

#define MAX_CHANNELS 8

Maximum number of channels in a valid stream.

MLP : 5.1 + 2 noise channels -> 8 channels TrueHD: 7.1 -> 8 channels

Definition at line 39 of file mlp.h.

◆ MAX_MATRICES_MLP

#define MAX_MATRICES_MLP 6

Maximum number of matrices used in decoding; most streams have one matrix per output channel, but some rematrix a channel (usually 0) more than once.

Definition at line 44 of file mlp.h.

◆ MAX_MATRICES_TRUEHD

#define MAX_MATRICES_TRUEHD 8

Definition at line 45 of file mlp.h.

◆ MAX_MATRICES

#define MAX_MATRICES 8

Definition at line 46 of file mlp.h.

◆ MAX_SUBSTREAMS

#define MAX_SUBSTREAMS 4

Maximum number of substreams that can be decoded.

MLP's limit is 2. TrueHD supports at least up to 3.

Definition at line 51 of file mlp.h.

◆ MAX_RATEFACTOR

#define MAX_RATEFACTOR 4

which multiple of 48000 the maximum sample rate is

Definition at line 54 of file mlp.h.

◆ MAX_SAMPLERATE

#define MAX_SAMPLERATE (MAX_RATEFACTOR * 48000)

maximum sample frequency seen in files

Definition at line 56 of file mlp.h.

◆ MAX_BLOCKSIZE

#define MAX_BLOCKSIZE (40 * MAX_RATEFACTOR)

maximum number of audio samples within one access unit

Definition at line 59 of file mlp.h.

◆ MAX_BLOCKSIZE_POW2

#define MAX_BLOCKSIZE_POW2 (64 * MAX_RATEFACTOR)

next power of two greater than MAX_BLOCKSIZE

Definition at line 61 of file mlp.h.

◆ NUM_FILTERS

#define NUM_FILTERS 2

number of allowed filters

Definition at line 64 of file mlp.h.

◆ MAX_FIR_ORDER

#define MAX_FIR_ORDER 8

The maximum number of taps in IIR and FIR filters.

Definition at line 67 of file mlp.h.

◆ MAX_IIR_ORDER

#define MAX_IIR_ORDER 4

Definition at line 68 of file mlp.h.

◆ END_OF_STREAM

#define END_OF_STREAM 0xd234d234

Code that signals end of a stream.

Definition at line 71 of file mlp.h.

◆ PARAM_BLOCKSIZE

#define PARAM_BLOCKSIZE (1 << 7)

Definition at line 73 of file mlp.h.

◆ PARAM_MATRIX

#define PARAM_MATRIX (1 << 6)

Definition at line 74 of file mlp.h.

◆ PARAM_OUTSHIFT

#define PARAM_OUTSHIFT (1 << 5)

Definition at line 75 of file mlp.h.

◆ PARAM_QUANTSTEP

#define PARAM_QUANTSTEP (1 << 4)

Definition at line 76 of file mlp.h.

◆ PARAM_FIR

#define PARAM_FIR (1 << 3)

Definition at line 77 of file mlp.h.

◆ PARAM_IIR

#define PARAM_IIR (1 << 2)

Definition at line 78 of file mlp.h.

◆ PARAM_HUFFOFFSET

#define PARAM_HUFFOFFSET (1 << 1)

Definition at line 79 of file mlp.h.

◆ PARAM_PRESENCE

#define PARAM_PRESENCE (1 << 0)

Definition at line 80 of file mlp.h.

◆ FIR

#define FIR 0

Definition at line 82 of file mlp.h.

◆ IIR

#define IIR 1

Definition at line 83 of file mlp.h.

Enumeration Type Documentation

◆ THDChannelModifier

enum THDChannelModifier

Enumerator
THD_CH_MODIFIER_NOTINDICATED
THD_CH_MODIFIER_STEREO
THD_CH_MODIFIER_LTRT
THD_CH_MODIFIER_LBINRBIN
THD_CH_MODIFIER_MONO
THD_CH_MODIFIER_NOTSURROUNDEX
THD_CH_MODIFIER_SURROUNDEX

Definition at line 179 of file mlp.h.

Function Documentation

◆ ff_mlp_checksum8()

uint8_t ff_mlp_checksum8	(	const uint8_t *	buf,
		unsigned int	buf_size
	)

MLP uses checksums that seem to be based on the standard CRC algorithm, but are not (in implementation terms, the table lookup and XOR are reversed).

We can implement this behavior using a standard av_crc on all but the last element, then XOR that with the last element.

Definition at line 98 of file mlp.c.

Referenced by read_access_unit(), and write_substr().

◆ ff_mlp_checksum16()

uint16_t ff_mlp_checksum16	(	const uint8_t *	buf,
		unsigned int	buf_size
	)

Definition at line 89 of file mlp.c.

Referenced by ff_mlp_read_major_sync(), truehd_core_filter(), and write_major_sync().

◆ ff_mlp_restart_checksum()

uint8_t ff_mlp_restart_checksum	(	const uint8_t *	buf,
		unsigned int	bit_size
	)

Calculate an 8-bit checksum over a restart header – a non-multiple-of-8 number of bits, starting two bits into the first byte of buf.

Definition at line 105 of file mlp.c.

Referenced by read_restart_header(), and write_restart_header().

◆ ff_mlp_calculate_parity()

uint8_t ff_mlp_calculate_parity	(	const uint8_t *	buf,
		unsigned int	buf_size
	)

XOR together all the bytes of a buffer.

Does this belong in dspcontext?

Definition at line 124 of file mlp.c.

Referenced by read_access_unit(), and write_substr().

◆ ff_mlp_init_crc()

void ff_mlp_init_crc ( void )

Definition at line 83 of file mlp.c.

Referenced by init_static(), mlp_encode_init_static(), and mlp_init().

◆ xor_32_to_8()

static uint8_t xor_32_to_8 ( uint32_t value )

inlinestatic

XOR four bytes into one.

Definition at line 172 of file mlp.h.

Referenced by ff_mlp_calculate_parity(), read_restart_header(), and write_restart_header().

Variable Documentation

◆ ff_mlp_huffman_tables

const uint8_t ff_mlp_huffman_tables[3][18][2]

Tables defining the Huffman codes.

There are three entropy coding methods used in MLP (four if you count "none" as a method). These use the same sequences for codes starting with 00 or 01, but have different codes starting with 1.

Definition at line 30 of file mlp.c.

Referenced by codebook_bits_offset(), init_static(), and write_block_data().

◆ ff_mlp_ch_info

const ChannelInformation ff_mlp_ch_info[21]

Tables defining channel information.

Possible channel arrangements are:

(Group 1) C (Group 1) L, R (Group 1) Lf, Rf / (Group 2) S (Group 1) Lf, Rf / (Group 2) Ls, Rs (Group 1) Lf, Rf / (Group 2) LFE (Group 1) Lf, Rf / (Group 2) LFE, S (Group 1) Lf, Rf / (Group 2) LFE, Ls, Rs (Group 1) Lf, Rf / (Group 2) C (Group 1) Lf, Rf / (Group 2) C, S (Group 1) Lf, Rf / (Group 2) C, Ls, Rs (Group 1) Lf, Rf / (Group 2) C, LFE (Group 1) Lf, Rf / (Group 2) C, LFE, S (Group 1) Lf, Rf / (Group 2) C, LFE, Ls, Rs (Group 1) Lf, Rf C / (Group 2) S (Group 1) Lf, Rf C / (Group 2) Ls, Rs (Group 1) Lf, Rf C / (Group 2) LFE (Group 1) Lf, Rf C / (Group 2) LFE, S (Group 1) Lf, Rf C / (Group 2) LFE, Ls, Rs (Group 1) Lf, Rf Ls Rs / (Group 2) LFE (Group 1) Lf, Rf Ls Rs / (Group 2) C (Group 1) Lf, Rf, Ls, Rs / (Group 2) C, LFE

Definition at line 46 of file mlp.c.

Referenced by mlp_encode_init().

◆ ff_mlp_ch_layouts

const AVChannelLayout ff_mlp_ch_layouts[12]

Definition at line 60 of file mlp.c.

Data Structures

Macros

Enumerations

Functions

Variables