[FFmpeg-cvslog] miscellaneous typo fixes

Diego Biurrun git at videolan.org
Fri Dec 21 17:37:06 CET 2012


ffmpeg | branch: master | Diego Biurrun <diego at biurrun.de> | Wed Dec 19 18:48:21 2012 +0100| [511cf612ac979f536fd65e14603a87ca5ad435f3] | committer: Diego Biurrun

miscellaneous typo fixes

> http://git.videolan.org/gitweb.cgi/ffmpeg.git/?a=commit;h=511cf612ac979f536fd65e14603a87ca5ad435f3
---

 configure                        |    2 +-
 doc/Doxyfile                     |    2 +-
 doc/developer.texi               |    2 +-
 doc/indevs.texi                  |    2 +-
 doc/rate_distortion.txt          |    2 +-
 doc/viterbi.txt                  |    4 ++--
 libavcodec/4xm.c                 |    2 +-
 libavcodec/aacpsy.c              |    4 ++--
 libavcodec/ac3dec.c              |    2 +-
 libavcodec/ac3enc.c              |    2 +-
 libavcodec/acelp_filters.h       |    2 +-
 libavcodec/avcodec.h             |    2 +-
 libavcodec/bitstream.c           |    2 +-
 libavcodec/eac3dec.c             |    2 +-
 libavcodec/ffv1dec.c             |    2 +-
 libavcodec/flicvideo.c           |    2 +-
 libavcodec/g726.c                |    2 +-
 libavcodec/h264_direct.c         |    2 +-
 libavcodec/indeo3data.h          |    4 ++--
 libavcodec/lagarith.c            |    4 ++--
 libavcodec/libfdk-aacenc.c       |    2 +-
 libavcodec/libtheoraenc.c        |    2 +-
 libavcodec/mpeg4videoenc.c       |    4 ++--
 libavcodec/parser.c              |    2 +-
 libavcodec/pngenc.c              |    2 +-
 libavcodec/ratecontrol.c         |    2 +-
 libavcodec/resample.c            |    2 +-
 libavcodec/rv10.c                |    2 +-
 libavcodec/shorten.c             |    3 ++-
 libavcodec/thread.h              |    2 +-
 libavcodec/vda_h264.c            |    2 +-
 libavcodec/vorbisdec.c           |    2 +-
 libavcodec/vp8dsp.h              |    2 +-
 libavcodec/wmaprodec.c           |    4 ++--
 libavdevice/dv1394.h             |    2 +-
 libavformat/avformat.h           |    2 +-
 libavformat/aviobuf.c            |    2 +-
 libavformat/dvenc.c              |    6 +++---
 libavformat/hls.c                |    2 +-
 libavformat/hlsproto.c           |    2 +-
 libavformat/http.h               |    2 +-
 libavformat/rtpdec_jpeg.c        |    2 +-
 libavformat/smoothstreamingenc.c |    2 +-
 libavformat/spdifenc.c           |    2 +-
 libavformat/wtv.c                |    2 +-
 libavformat/xmv.c                |    2 +-
 libavresample/avresample-test.c  |    2 +-
 libswscale/ppc/yuv2yuv_altivec.c |    2 +-
 libswscale/swscale.c             |    2 +-
 tests/audiogen.c                 |    2 +-
 tools/patcheck                   |    4 ++--
 51 files changed, 61 insertions(+), 60 deletions(-)

diff --git a/configure b/configure
index f099118..c357b53 100755
--- a/configure
+++ b/configure
@@ -1305,7 +1305,7 @@ HAVE_LIST="
     xmm_clobbers
 "
 
-# options emitted with CONFIG_ prefix but not available on command line
+# options emitted with CONFIG_ prefix but not available on the command line
 CONFIG_EXTRA="
     aandcttables
     ac3dsp
diff --git a/doc/Doxyfile b/doc/Doxyfile
index 1a37021..3b2236c 100644
--- a/doc/Doxyfile
+++ b/doc/Doxyfile
@@ -288,7 +288,7 @@ TYPEDEF_HIDES_STRUCT   = NO
 # causing a significant performance penality.
 # If the system has enough physical memory increasing the cache will improve the
 # performance by keeping more symbols in memory. Note that the value works on
-# a logarithmic scale so increasing the size by one will rougly double the
+# a logarithmic scale so increasing the size by one will roughly double the
 # memory usage. The cache size is given by this formula:
 # 2^(16+SYMBOL_CACHE_SIZE). The valid range is 0..9, the default is 0,
 # corresponding to a cache size of 2^16 = 65536 symbols
diff --git a/doc/developer.texi b/doc/developer.texi
index aff28b8..682a239 100644
--- a/doc/developer.texi
+++ b/doc/developer.texi
@@ -201,7 +201,7 @@ For exported names, each library has its own prefixes. Just check the existing
 code and name accordingly.
 @end itemize
 
- at subsection Miscellanous conventions
+ at subsection Miscellaneous conventions
 @itemize @bullet
 @item
 fprintf and printf are forbidden in libavformat and libavcodec,
diff --git a/doc/indevs.texi b/doc/indevs.texi
index b0ba6ac..8683297 100644
--- a/doc/indevs.texi
+++ b/doc/indevs.texi
@@ -300,7 +300,7 @@ The filename passed as input has the syntax:
 
 @var{hostname}:@var{display_number}. at var{screen_number} specifies the
 X11 display name of the screen to grab from. @var{hostname} can be
-ommitted, and defaults to "localhost". The environment variable
+omitted, and defaults to "localhost". The environment variable
 @env{DISPLAY} contains the default display name.
 
 @var{x_offset} and @var{y_offset} specify the offsets of the grabbed
diff --git a/doc/rate_distortion.txt b/doc/rate_distortion.txt
index a7d2c87..e9711c2 100644
--- a/doc/rate_distortion.txt
+++ b/doc/rate_distortion.txt
@@ -23,7 +23,7 @@ Let's consider the problem of minimizing:
 
 rate is the filesize
 distortion is the quality
-lambda is a fixed value choosen as a tradeoff between quality and filesize
+lambda is a fixed value chosen as a tradeoff between quality and filesize
 Is this equivalent to finding the best quality for a given max
 filesize? The answer is yes. For each filesize limit there is some lambda
 factor for which minimizing above will get you the best quality (using your
diff --git a/doc/viterbi.txt b/doc/viterbi.txt
index 5362a0b..9782546 100644
--- a/doc/viterbi.txt
+++ b/doc/viterbi.txt
@@ -85,8 +85,8 @@ here are some edges we could choose from:
      /        \
     O-----2--4--O
 
-Finding the new best pathes and scores for each point of our new column is
-trivial given we know the previous column best pathes and scores:
+Finding the new best paths and scores for each point of our new column is
+trivial given we know the previous column best paths and scores:
 
     O-----0-----8
      \
diff --git a/libavcodec/4xm.c b/libavcodec/4xm.c
index f78a0a2..66149cc 100644
--- a/libavcodec/4xm.c
+++ b/libavcodec/4xm.c
@@ -796,7 +796,7 @@ static int decode_frame(AVCodecContext *avctx, void *data,
                                      cfrm->size + data_size + FF_INPUT_BUFFER_PADDING_SIZE);
         // explicit check needed as memcpy below might not catch a NULL
         if (!cfrm->data) {
-            av_log(f->avctx, AV_LOG_ERROR, "realloc falure");
+            av_log(f->avctx, AV_LOG_ERROR, "realloc failure");
             return -1;
         }
 
diff --git a/libavcodec/aacpsy.c b/libavcodec/aacpsy.c
index 42db471..e4b4405 100644
--- a/libavcodec/aacpsy.c
+++ b/libavcodec/aacpsy.c
@@ -592,7 +592,7 @@ static void psy_3gpp_analyze_channel(FFPsyContext *ctx, int channel,
     for (w = 0; w < wi->num_windows*16; w += 16) {
         AacPsyBand *bands = &pch->band[w];
 
-        //5.4.2.3 "Spreading" & 5.4.3 "Spreaded Energy Calculation"
+        /* 5.4.2.3 "Spreading" & 5.4.3 "Spread Energy Calculation" */
         spread_en[0] = bands[0].energy;
         for (g = 1; g < num_bands; g++) {
             bands[g].thr   = FFMAX(bands[g].thr,    bands[g-1].thr * coeffs[g].spread_hi[0]);
@@ -612,7 +612,7 @@ static void psy_3gpp_analyze_channel(FFPsyContext *ctx, int channel,
                 band->thr = FFMAX(PSY_3GPP_RPEMIN*band->thr, FFMIN(band->thr,
                                   PSY_3GPP_RPELEV*pch->prev_band[w+g].thr_quiet));
 
-            /* 5.6.1.3.1 "Prepatory steps of the perceptual entropy calculation" */
+            /* 5.6.1.3.1 "Preparatory steps of the perceptual entropy calculation" */
             pe += calc_pe_3gpp(band);
             a  += band->pe_const;
             active_lines += band->active_lines;
diff --git a/libavcodec/ac3dec.c b/libavcodec/ac3dec.c
index acefe41..f15bfa2 100644
--- a/libavcodec/ac3dec.c
+++ b/libavcodec/ac3dec.c
@@ -546,7 +546,7 @@ static void decode_transform_coeffs(AC3DecodeContext *s, int blk)
     for (ch = 1; ch <= s->channels; ch++) {
         /* transform coefficients for full-bandwidth channel */
         decode_transform_coeffs_ch(s, blk, ch, &m);
-        /* tranform coefficients for coupling channel come right after the
+        /* transform coefficients for coupling channel come right after the
            coefficients for the first coupled channel*/
         if (s->channel_in_cpl[ch])  {
             if (!got_cplchan) {
diff --git a/libavcodec/ac3enc.c b/libavcodec/ac3enc.c
index 6d038ef..c0acc64 100644
--- a/libavcodec/ac3enc.c
+++ b/libavcodec/ac3enc.c
@@ -659,7 +659,7 @@ static void count_frame_bits_fixed(AC3EncodeContext *s)
      *   bit allocation parameters do not change between blocks
      *   no delta bit allocation
      *   no skipped data
-     *   no auxilliary data
+     *   no auxiliary data
      *   no E-AC-3 metadata
      */
 
diff --git a/libavcodec/acelp_filters.h b/libavcodec/acelp_filters.h
index b8715d2..6a9ebd9 100644
--- a/libavcodec/acelp_filters.h
+++ b/libavcodec/acelp_filters.h
@@ -32,7 +32,7 @@
  * the coefficients are scaled by 2^15.
  * This array only contains the right half of the filter.
  * This filter is likely identical to the one used in G.729, though this
- * could not be determined from the original comments with certainity.
+ * could not be determined from the original comments with certainty.
  */
 extern const int16_t ff_acelp_interp_filter[61];
 
diff --git a/libavcodec/avcodec.h b/libavcodec/avcodec.h
index 29e3701..d12c72b 100644
--- a/libavcodec/avcodec.h
+++ b/libavcodec/avcodec.h
@@ -2292,7 +2292,7 @@ typedef struct AVCodecContext {
 
     /**
      * ratecontrol qmin qmax limiting method
-     * 0-> clipping, 1-> use a nice continous function to limit qscale wthin qmin/qmax.
+     * 0-> clipping, 1-> use a nice continuous function to limit qscale wthin qmin/qmax.
      * - encoding: Set by user.
      * - decoding: unused
      */
diff --git a/libavcodec/bitstream.c b/libavcodec/bitstream.c
index eec2f6d..2c8692a 100644
--- a/libavcodec/bitstream.c
+++ b/libavcodec/bitstream.c
@@ -169,7 +169,7 @@ static int build_table(VLC *vlc, int table_nb_bits, int nb_codes,
         table[i][0] = -1; //codes
     }
 
-    /* first pass: map codes and compute auxillary table sizes */
+    /* first pass: map codes and compute auxiliary table sizes */
     for (i = 0; i < nb_codes; i++) {
         n = codes[i].bits;
         code = codes[i].code;
diff --git a/libavcodec/eac3dec.c b/libavcodec/eac3dec.c
index 639e061..3a80cb1 100644
--- a/libavcodec/eac3dec.c
+++ b/libavcodec/eac3dec.c
@@ -491,7 +491,7 @@ int ff_eac3_parse_header(AC3DecodeContext *s)
     s->skip_syntax       = get_bits1(gbc);
     parse_spx_atten_data = get_bits1(gbc);
 
-    /* coupling strategy occurance and coupling use per block */
+    /* coupling strategy occurrence and coupling use per block */
     num_cpl_blocks = 0;
     if (s->channel_mode > 1) {
         for (blk = 0; blk < s->num_blocks; blk++) {
diff --git a/libavcodec/ffv1dec.c b/libavcodec/ffv1dec.c
index b1dec7d..72f255c 100644
--- a/libavcodec/ffv1dec.c
+++ b/libavcodec/ffv1dec.c
@@ -824,7 +824,7 @@ static int ffv1_decode_frame(AVCodecContext *avctx, void *data,
     } else {
         if (!f->key_frame_ok) {
             av_log(avctx, AV_LOG_ERROR,
-                   "Cant decode non keyframe without valid keyframe\n");
+                   "Cannot decode non-keyframe without valid keyframe\n");
             return AVERROR_INVALIDDATA;
         }
         p->key_frame = 0;
diff --git a/libavcodec/flicvideo.c b/libavcodec/flicvideo.c
index 02bfc75..d2cc6cd 100644
--- a/libavcodec/flicvideo.c
+++ b/libavcodec/flicvideo.c
@@ -581,7 +581,7 @@ static int flic_decode_frame_15_16BPP(AVCodecContext *avctx,
                 }
 
                 /* Now FLX is strange, in that it is "byte" as opposed to "pixel" run length compressed.
-                 * This does not give us any good oportunity to perform word endian conversion
+                 * This does not give us any good opportunity to perform word endian conversion
                  * during decompression. So if it is required (i.e., this is not a LE target, we do
                  * a second pass over the line here, swapping the bytes.
                  */
diff --git a/libavcodec/g726.c b/libavcodec/g726.c
index 3e313b9..dbe9e02 100644
--- a/libavcodec/g726.c
+++ b/libavcodec/g726.c
@@ -34,7 +34,7 @@
 /**
  * G.726 11bit float.
  * G.726 Standard uses rather odd 11bit floating point arithmentic for
- * numerous occasions. It's a mistery to me why they did it this way
+ * numerous occasions. It's a mystery to me why they did it this way
  * instead of simply using 32bit integer arithmetic.
  */
 typedef struct Float11 {
diff --git a/libavcodec/h264_direct.c b/libavcodec/h264_direct.c
index bf44495..2306b97 100644
--- a/libavcodec/h264_direct.c
+++ b/libavcodec/h264_direct.c
@@ -86,7 +86,7 @@ static void fill_colmap(H264Context *h, int map[2][16+32], int list, int field,
 
             if     (!interl)
                 poc |= 3;
-            else if( interl && (poc&3) == 3) //FIXME store all MBAFF references so this isnt needed
+            else if( interl && (poc&3) == 3) // FIXME: store all MBAFF references so this is not needed
                 poc= (poc&~3) + rfield + 1;
 
             for(j=start; j<end; j++){
diff --git a/libavcodec/indeo3data.h b/libavcodec/indeo3data.h
index 2ef8ea7..28c9bb6 100644
--- a/libavcodec/indeo3data.h
+++ b/libavcodec/indeo3data.h
@@ -235,7 +235,7 @@
 
 /**
  * Pack two delta values (a,b) into one 16bit word
- * according with endianess of the host machine.
+ * according with endianness of the host machine.
  */
 #if HAVE_BIGENDIAN
 #define PD(a,b) (((a) << 8) + (b))
@@ -282,7 +282,7 @@ static const int16_t delta_tab_3_5[79]  = { TAB_3_5 };
 
 /**
  * Pack four delta values (a,a,b,b) into one 32bit word
- * according with endianess of the host machine.
+ * according with endianness of the host machine.
  */
 #if HAVE_BIGENDIAN
 #define PD(a,b) (((a) << 24) + ((a) << 16) + ((b) << 8) + (b))
diff --git a/libavcodec/lagarith.c b/libavcodec/lagarith.c
index 7d7a1a7..33dd8b0 100644
--- a/libavcodec/lagarith.c
+++ b/libavcodec/lagarith.c
@@ -198,8 +198,8 @@ static int lag_read_prob_header(lag_rac *rac, GetBitContext *gb)
             }
             /* Comment from reference source:
              * if (b & 0x80 == 0) {     // order of operations is 'wrong'; it has been left this way
-             *                          // since the compression change is negligable and fixing it
-             *                          // breaks backwards compatibilty
+             *                          // since the compression change is negligible and fixing it
+             *                          // breaks backwards compatibility
              *      b =- (signed int)b;
              *      b &= 0xFF;
              * } else {
diff --git a/libavcodec/libfdk-aacenc.c b/libavcodec/libfdk-aacenc.c
index 85ccb10..00397d5 100644
--- a/libavcodec/libfdk-aacenc.c
+++ b/libavcodec/libfdk-aacenc.c
@@ -257,7 +257,7 @@ static av_cold int aac_encode_init(AVCodecContext *avctx)
         }
         if ((err = aacEncoder_SetParam(s->handle, AACENC_BANDWIDTH,
                                        avctx->cutoff)) != AACENC_OK) {
-            av_log(avctx, AV_LOG_ERROR, "Unable to set the encoder bandwith to %d: %s\n",
+            av_log(avctx, AV_LOG_ERROR, "Unable to set the encoder bandwidth to %d: %s\n",
                    avctx->cutoff, aac_get_error(err));
             goto error;
         }
diff --git a/libavcodec/libtheoraenc.c b/libavcodec/libtheoraenc.c
index e57310a..f20fabb 100644
--- a/libavcodec/libtheoraenc.c
+++ b/libavcodec/libtheoraenc.c
@@ -338,7 +338,7 @@ static int encode_frame(AVCodecContext* avc_context, AVPacket *pkt,
     memcpy(pkt->data, o_packet.packet, o_packet.bytes);
 
     // HACK: assumes no encoder delay, this is true until libtheora becomes
-    // multithreaded (which will be disabled unless explictly requested)
+    // multithreaded (which will be disabled unless explicitly requested)
     pkt->pts = pkt->dts = frame->pts;
     avc_context->coded_frame->key_frame = !(o_packet.granulepos & h->keyframe_mask);
     if (avc_context->coded_frame->key_frame)
diff --git a/libavcodec/mpeg4videoenc.c b/libavcodec/mpeg4videoenc.c
index b145eb2..986cba6 100644
--- a/libavcodec/mpeg4videoenc.c
+++ b/libavcodec/mpeg4videoenc.c
@@ -89,7 +89,7 @@ static inline int get_block_rate(MpegEncContext * s, DCTELEM block[64], int bloc
  * @param[in,out] block MB coefficients, these will be restored
  * @param[in] dir ac prediction direction for each 8x8 block
  * @param[out] st scantable for each 8x8 block
- * @param[in] zigzag_last_index index refering to the last non zero coefficient in zigzag order
+ * @param[in] zigzag_last_index index referring to the last non zero coefficient in zigzag order
  */
 static inline void restore_ac_coeffs(MpegEncContext * s, DCTELEM block[6][64], const int dir[6], uint8_t *st[6], const int zigzag_last_index[6])
 {
@@ -120,7 +120,7 @@ static inline void restore_ac_coeffs(MpegEncContext * s, DCTELEM block[6][64], c
  * @param[in,out] block MB coefficients, these will be updated if 1 is returned
  * @param[in] dir ac prediction direction for each 8x8 block
  * @param[out] st scantable for each 8x8 block
- * @param[out] zigzag_last_index index refering to the last non zero coefficient in zigzag order
+ * @param[out] zigzag_last_index index referring to the last non zero coefficient in zigzag order
  */
 static inline int decide_ac_pred(MpegEncContext * s, DCTELEM block[6][64], const int dir[6], uint8_t *st[6], int zigzag_last_index[6])
 {
diff --git a/libavcodec/parser.c b/libavcodec/parser.c
index 0767a34..6e755f6 100644
--- a/libavcodec/parser.c
+++ b/libavcodec/parser.c
@@ -96,7 +96,7 @@ void ff_fetch_timestamp(AVCodecParserContext *s, int off, int remove){
         if (   s->cur_offset + off >= s->cur_frame_offset[i]
             && (s->frame_offset < s->cur_frame_offset[i] ||
               (!s->frame_offset && !s->next_frame_offset)) // first field/frame
-            //check is disabled  because mpeg-ts doesnt send complete PES packets
+            // check disabled since MPEG-TS does not send complete PES packets
             && /*s->next_frame_offset + off <*/  s->cur_frame_end[i]){
             s->dts= s->cur_frame_dts[i];
             s->pts= s->cur_frame_pts[i];
diff --git a/libavcodec/pngenc.c b/libavcodec/pngenc.c
index 00a800c..b20a6d6 100644
--- a/libavcodec/pngenc.c
+++ b/libavcodec/pngenc.c
@@ -367,7 +367,7 @@ static int encode_frame(AVCodecContext *avctx, AVPacket *pkt,
         int pass;
 
         for(pass = 0; pass < NB_PASSES; pass++) {
-            /* NOTE: a pass is completely omited if no pixels would be
+            /* NOTE: a pass is completely omitted if no pixels would be
                output */
             pass_row_size = ff_png_pass_row_size(pass, bits_per_pixel, avctx->width);
             if (pass_row_size > 0) {
diff --git a/libavcodec/ratecontrol.c b/libavcodec/ratecontrol.c
index 2cb5eea..e0b6e9b 100644
--- a/libavcodec/ratecontrol.c
+++ b/libavcodec/ratecontrol.c
@@ -799,7 +799,7 @@ static int init_pass2(MpegEncContext *s)
     AVCodecContext *a= s->avctx;
     int i, toobig;
     double fps= 1/av_q2d(s->avctx->time_base);
-    double complexity[5]={0,0,0,0,0};   // aproximate bits at quant=1
+    double complexity[5]={0,0,0,0,0};   // approximate bits at quant=1
     uint64_t const_bits[5]={0,0,0,0,0}; // quantizer independent bits
     uint64_t all_const_bits;
     uint64_t all_available_bits= (uint64_t)(s->bit_rate*(double)rcc->num_entries/fps);
diff --git a/libavcodec/resample.c b/libavcodec/resample.c
index 20d7078..1b3bb83 100644
--- a/libavcodec/resample.c
+++ b/libavcodec/resample.c
@@ -350,7 +350,7 @@ int audio_resample(ReSampleContext *s, short *output, short *input, int nb_sampl
         if (av_audio_convert(s->convert_ctx[1], obuf, ostride,
                              ibuf, istride, nb_samples1 * s->output_channels) < 0) {
             av_log(s->resample_context, AV_LOG_ERROR,
-                   "Audio sample format convertion failed\n");
+                   "Audio sample format conversion failed\n");
             return 0;
         }
     }
diff --git a/libavcodec/rv10.c b/libavcodec/rv10.c
index 73af362..9239cf7 100644
--- a/libavcodec/rv10.c
+++ b/libavcodec/rv10.c
@@ -706,7 +706,7 @@ static int rv10_decode_frame(AVCodecContext *avctx,
             *got_frame = 1;
             ff_print_debug_info(s, pict);
         }
-        s->current_picture_ptr= NULL; //so we can detect if frame_end wasnt called (find some nicer solution...)
+        s->current_picture_ptr= NULL; // so we can detect if frame_end was not called (find some nicer solution...)
     }
 
     return avpkt->size;
diff --git a/libavcodec/shorten.c b/libavcodec/shorten.c
index fad69b8..1dc010f 100644
--- a/libavcodec/shorten.c
+++ b/libavcodec/shorten.c
@@ -528,7 +528,8 @@ static int shorten_decode_frame(AVCodecContext *avctx, void *data,
             /* get Rice code for residual decoding */
             if (cmd != FN_ZERO) {
                 residual_size = get_ur_golomb_shorten(&s->gb, ENERGYSIZE);
-                /* this is a hack as version 0 differed in defintion of get_sr_golomb_shorten */
+                /* This is a hack as version 0 differed in the definition
+                 * of get_sr_golomb_shorten(). */
                 if (s->version == 0)
                     residual_size--;
             }
diff --git a/libavcodec/thread.h b/libavcodec/thread.h
index 782c03c..99b0ce1 100644
--- a/libavcodec/thread.h
+++ b/libavcodec/thread.h
@@ -43,7 +43,7 @@ void ff_thread_flush(AVCodecContext *avctx);
  * Returns the next available frame in picture. *got_picture_ptr
  * will be 0 if none is available.
  * The return value on success is the size of the consumed packet for
- * compatiblity with avcodec_decode_video2(). This means the decoder
+ * compatibility with avcodec_decode_video2(). This means the decoder
  * has to consume the full packet.
  *
  * Parameters are the same as avcodec_decode_video2().
diff --git a/libavcodec/vda_h264.c b/libavcodec/vda_h264.c
index 2a78aac..34fcd3c 100644
--- a/libavcodec/vda_h264.c
+++ b/libavcodec/vda_h264.c
@@ -281,7 +281,7 @@ int ff_vda_create_decoder(struct vda_context *vda_ctx,
 #endif
 
     /* Each VCL NAL in the bistream sent to the decoder
-     * is preceeded by a 4 bytes length header.
+     * is preceded by a 4 bytes length header.
      * Change the avcC atom header if needed, to signal headers of 4 bytes. */
     if (extradata_size >= 4 && (extradata[4] & 0x03) != 0x03) {
         uint8_t *rw_extradata;
diff --git a/libavcodec/vorbisdec.c b/libavcodec/vorbisdec.c
index b30e614..aac9019 100644
--- a/libavcodec/vorbisdec.c
+++ b/libavcodec/vorbisdec.c
@@ -1233,7 +1233,7 @@ static int vorbis_floor1_decode(vorbis_context *vc,
         if (highroom < lowroom) {
             room = highroom * 2;
         } else {
-            room = lowroom * 2;   // SPEC mispelling
+            room = lowroom * 2;   // SPEC misspelling
         }
         if (val) {
             floor1_flag[low_neigh_offs]  = 1;
diff --git a/libavcodec/vp8dsp.h b/libavcodec/vp8dsp.h
index 62cc010..bce0062 100644
--- a/libavcodec/vp8dsp.h
+++ b/libavcodec/vp8dsp.h
@@ -73,7 +73,7 @@ typedef struct VP8DSPContext {
      * second dimension: 0 if no vertical interpolation is needed;
      *                   1 4-tap vertical interpolation filter (my & 1)
      *                   2 6-tap vertical interpolation filter (!(my & 1))
-     * third dimension: same as second dimention, for horizontal interpolation
+     * third dimension: same as second dimension, for horizontal interpolation
      * so something like put_vp8_epel_pixels_tab[width>>3][2*!!my-(my&1)][2*!!mx-(mx&1)](..., mx, my)
      */
     vp8_mc_func put_vp8_epel_pixels_tab[3][3][3];
diff --git a/libavcodec/wmaprodec.c b/libavcodec/wmaprodec.c
index 321c25d..e19c3d3 100644
--- a/libavcodec/wmaprodec.c
+++ b/libavcodec/wmaprodec.c
@@ -533,7 +533,7 @@ static int decode_tilehdr(WMAProDecodeCtx *s)
     int c;
 
     /* Should never consume more than 3073 bits (256 iterations for the
-     * while loop when always the minimum amount of 128 samples is substracted
+     * while loop when always the minimum amount of 128 samples is subtracted
      * from missing samples in the 8 channel case).
      * 1 + BLOCK_MAX_SIZE * MAX_CHANNELS / BLOCK_MIN_SIZE * (MAX_CHANNELS  + 4)
      */
@@ -1089,7 +1089,7 @@ static int decode_subframe(WMAProDecodeCtx *s)
     s->channels_for_cur_subframe = 0;
     for (i = 0; i < s->avctx->channels; i++) {
         const int cur_subframe = s->channel[i].cur_subframe;
-        /** substract already processed samples */
+        /** subtract already processed samples */
         total_samples -= s->channel[i].decoded_samples;
 
         /** and count if there are multiple subframes that match our profile */
diff --git a/libavdevice/dv1394.h b/libavdevice/dv1394.h
index fc4df24..9710ff5 100644
--- a/libavdevice/dv1394.h
+++ b/libavdevice/dv1394.h
@@ -186,7 +186,7 @@
    where copy_DV_frame() reads or writes on the dv1394 file descriptor
    (read/write mode) or copies data to/from the mmap ringbuffer and
    then calls ioctl(DV1394_SUBMIT_FRAMES) to notify dv1394 that new
-   frames are availble (mmap mode).
+   frames are available (mmap mode).
 
    reset_dv1394() is called in the event of a buffer
    underflow/overflow or a halt in the DV stream (e.g. due to a 1394
diff --git a/libavformat/avformat.h b/libavformat/avformat.h
index 51635c4..149b66f 100644
--- a/libavformat/avformat.h
+++ b/libavformat/avformat.h
@@ -1532,7 +1532,7 @@ enum AVCodecID av_guess_codec(AVOutputFormat *fmt, const char *short_name,
  * @ingroup libavf
  * @{
  *
- * Miscelaneous utility functions related to both muxing and demuxing
+ * Miscellaneous utility functions related to both muxing and demuxing
  * (or neither).
  */
 
diff --git a/libavformat/aviobuf.c b/libavformat/aviobuf.c
index b762d10..0da1e05 100644
--- a/libavformat/aviobuf.c
+++ b/libavformat/aviobuf.c
@@ -368,7 +368,7 @@ static void fill_buffer(AVIOContext *s)
     int max_buffer_size = s->max_packet_size ?
                           s->max_packet_size : IO_BUFFER_SIZE;
 
-    /* can't fill the buffer without read_packet, just set EOF if appropiate */
+    /* can't fill the buffer without read_packet, just set EOF if appropriate */
     if (!s->read_packet && s->buf_ptr >= s->buf_end)
         s->eof_reached = 1;
 
diff --git a/libavformat/dvenc.c b/libavformat/dvenc.c
index 27a444e..a991cc6 100644
--- a/libavformat/dvenc.c
+++ b/libavformat/dvenc.c
@@ -47,9 +47,9 @@ struct DVMuxContext {
     AVFifoBuffer     *audio_data[2]; /* FIFO for storing excessive amounts of PCM */
     int               frames;        /* current frame number */
     int64_t           start_time;    /* recording start time */
-    int               has_audio;     /* frame under contruction has audio */
-    int               has_video;     /* frame under contruction has video */
-    uint8_t           frame_buf[DV_MAX_FRAME_SIZE]; /* frame under contruction */
+    int               has_audio;     /* frame under construction has audio */
+    int               has_video;     /* frame under construction has video */
+    uint8_t           frame_buf[DV_MAX_FRAME_SIZE]; /* frame under construction */
 };
 
 static const int dv_aaux_packs_dist[12][9] = {
diff --git a/libavformat/hls.c b/libavformat/hls.c
index 1f6b7d5..4c0e0c0 100644
--- a/libavformat/hls.c
+++ b/libavformat/hls.c
@@ -42,7 +42,7 @@
  * An apple http stream consists of a playlist with media segment files,
  * played sequentially. There may be several playlists with the same
  * video content, in different bandwidth variants, that are played in
- * parallel (preferrably only one bandwidth variant at a time). In this case,
+ * parallel (preferably only one bandwidth variant at a time). In this case,
  * the user supplied the url to a main playlist that only lists the variant
  * playlists.
  *
diff --git a/libavformat/hlsproto.c b/libavformat/hlsproto.c
index 179bdf1..b750501 100644
--- a/libavformat/hlsproto.c
+++ b/libavformat/hlsproto.c
@@ -36,7 +36,7 @@
  * An apple http stream consists of a playlist with media segment files,
  * played sequentially. There may be several playlists with the same
  * video content, in different bandwidth variants, that are played in
- * parallel (preferrably only one bandwidth variant at a time). In this case,
+ * parallel (preferably only one bandwidth variant at a time). In this case,
  * the user supplied the url to a main playlist that only lists the variant
  * playlists.
  *
diff --git a/libavformat/http.h b/libavformat/http.h
index 3579ad7..f0d9d4a 100644
--- a/libavformat/http.h
+++ b/libavformat/http.h
@@ -40,7 +40,7 @@ void ff_http_init_auth_state(URLContext *dest, const URLContext *src);
  *
  * @param h pointer to the ressource
  * @param uri uri used to perform the request
- * @return a negative value if an error condition occured, 0
+ * @return a negative value if an error condition occurred, 0
  * otherwise
  */
 int ff_http_do_new_request(URLContext *h, const char *uri);
diff --git a/libavformat/rtpdec_jpeg.c b/libavformat/rtpdec_jpeg.c
index 9f73f7d..25bb88d 100644
--- a/libavformat/rtpdec_jpeg.c
+++ b/libavformat/rtpdec_jpeg.c
@@ -370,7 +370,7 @@ static int jpeg_parse_packet(AVFormatContext *ctx, PayloadContext *jpeg,
         /* Prepare the JPEG packet. */
         if ((ret = ff_rtp_finalize_packet(pkt, &jpeg->frame, st->index)) < 0) {
             av_log(ctx, AV_LOG_ERROR,
-                   "Error occured when getting frame buffer.\n");
+                   "Error occurred when getting frame buffer.\n");
             return ret;
         }
 
diff --git a/libavformat/smoothstreamingenc.c b/libavformat/smoothstreamingenc.c
index 1ed675a..d26af05 100644
--- a/libavformat/smoothstreamingenc.c
+++ b/libavformat/smoothstreamingenc.c
@@ -51,7 +51,7 @@ typedef struct {
     char dirname[1024];
     uint8_t iobuf[32768];
     URLContext *out;  // Current output stream where all output is written
-    URLContext *out2; // Auxillary output stream where all output also is written
+    URLContext *out2; // Auxiliary output stream where all output is also written
     URLContext *tail_out; // The actual main output stream, if we're currently seeked back to write elsewhere
     int64_t tail_pos, cur_pos, cur_start_pos;
     int packets_written;
diff --git a/libavformat/spdifenc.c b/libavformat/spdifenc.c
index 77af92e..dcdabae 100644
--- a/libavformat/spdifenc.c
+++ b/libavformat/spdifenc.c
@@ -339,7 +339,7 @@ static int spdif_header_mpeg(AVFormatContext *s, AVPacket *pkt)
         ctx->data_type  = mpeg_data_type [version & 1][layer];
         ctx->pkt_offset = spdif_mpeg_pkt_offset[version & 1][layer];
     }
-    // TODO Data type dependant info (normal/karaoke, dynamic range control)
+    // TODO Data type dependent info (normal/karaoke, dynamic range control)
     return 0;
 }
 
diff --git a/libavformat/wtv.c b/libavformat/wtv.c
index 7bb421b..2e5d39c 100644
--- a/libavformat/wtv.c
+++ b/libavformat/wtv.c
@@ -221,7 +221,7 @@ static AVIOContext * wtvfile_open_sector(int first_sector, uint64_t length, int
     }
     wf->length = length;
 
-    /* seek to intial sector */
+    /* seek to initial sector */
     wf->position = 0;
     if (avio_seek(s->pb, (int64_t)wf->sectors[0] << WTV_SECTOR_BITS, SEEK_SET) < 0) {
         av_free(wf->sectors);
diff --git a/libavformat/xmv.c b/libavformat/xmv.c
index 5041c57..3f926ef 100644
--- a/libavformat/xmv.c
+++ b/libavformat/xmv.c
@@ -298,7 +298,7 @@ static int xmv_process_packet_header(AVFormatContext *s)
      * short for every audio track. But as playing around with XMV files with
      * ADPCM audio showed, taking the extra 4 bytes from the audio data gives
      * you either completely distorted audio or click (when skipping the
-     * remaining 68 bytes of the ADPCM block). Substracting 4 bytes for every
+     * remaining 68 bytes of the ADPCM block). Subtracting 4 bytes for every
      * audio track from the video data works at least for the audio. Probably
      * some alignment thing?
      * The video data has (always?) lots of padding, so it should work out...
diff --git a/libavresample/avresample-test.c b/libavresample/avresample-test.c
index ab49e48..81e9bf0 100644
--- a/libavresample/avresample-test.c
+++ b/libavresample/avresample-test.c
@@ -100,7 +100,7 @@ static void audiogen(AVLFG *rnd, void **data, enum AVSampleFormat sample_fmt,
         a += M_PI * 1000.0 * 2.0 / sample_rate;
     }
 
-    /* 1 second of varing frequency between 100 and 10000 Hz */
+    /* 1 second of varying frequency between 100 and 10000 Hz */
     a = 0;
     for (i = 0; i < 1 * sample_rate && k < nb_samples; i++, k++) {
         v = sin(a) * 0.30;
diff --git a/libswscale/ppc/yuv2yuv_altivec.c b/libswscale/ppc/yuv2yuv_altivec.c
index e68cccf..5aa1820 100644
--- a/libswscale/ppc/yuv2yuv_altivec.c
+++ b/libswscale/ppc/yuv2yuv_altivec.c
@@ -1,5 +1,5 @@
 /*
- * AltiVec-enhanced yuv-to-yuv convertion routines.
+ * AltiVec-enhanced yuv-to-yuv conversion routines.
  *
  * Copyright (C) 2004 Romain Dolbeau <romain at dolbeau.org>
  * based on the equivalent C code in swscale.c
diff --git a/libswscale/swscale.c b/libswscale/swscale.c
index c1920de..dac8b37 100644
--- a/libswscale/swscale.c
+++ b/libswscale/swscale.c
@@ -163,7 +163,7 @@ static void hScale8To19_c(SwsContext *c, int16_t *_dst, int dstW,
     }
 }
 
-// FIXME all pal and rgb srcFormats could do this convertion as well
+// FIXME all pal and rgb srcFormats could do this conversion as well
 // FIXME all scalers more complex than bilinear could do half of this transform
 static void chrRangeToJpeg_c(int16_t *dstU, int16_t *dstV, int width)
 {
diff --git a/tests/audiogen.c b/tests/audiogen.c
index acb380d..4fa4656 100644
--- a/tests/audiogen.c
+++ b/tests/audiogen.c
@@ -189,7 +189,7 @@ int main(int argc, char **argv)
         a += (1000 * FRAC_ONE) / sample_rate;
     }
 
-    /* 1 second of varing frequency between 100 and 10000 Hz */
+    /* 1 second of varying frequency between 100 and 10000 Hz */
     a = 0;
     for (i = 0; i < 1 * sample_rate; i++) {
         v = (int_cos(a) * 10000) >> FRAC_BITS;
diff --git a/tools/patcheck b/tools/patcheck
index 78ca824..d22cf3c 100755
--- a/tools/patcheck
+++ b/tools/patcheck
@@ -19,7 +19,7 @@ echo This tool is intended to help a human check/review patches it is very far f
 echo being free of false positives and negatives, its output are just hints of what
 echo may or may not be bad. When you use it and it misses something or detects
 echo something wrong, fix it and send a patch to the libav-devel mailing list.
-echo License:GPL Autor: Michael Niedermayer
+echo License:GPL Author: Michael Niedermayer
 
 ERE_PRITYP='(unsigned *|)(char|short|long|int|long *int|short *int|void|float|double|(u|)int(8|16|32|64)_t)'
 ERE_TYPES='(const|static|av_cold|inline| *)*('$ERE_PRITYP'|[a-zA-Z][a-zA-Z0-9_]*)[* ]{1,}[a-zA-Z][a-zA-Z0-9_]*'
@@ -158,7 +158,7 @@ cat $* | tr '\n' '@' | $EGREP --color=always -o '[^a-zA-Z0-9_]([a-zA-Z0-9_]*) *=
 cat $TMP | tr '@' '\n'
 
 
-# doesnt work
+# does not work
 #cat $* | tr '\n' '@' | $EGREP -o '[^a-zA-Z_0-9]([a-zA-Z][a-zA-Z_0-9]*) *=[^=].*\1' | $EGREP -o '[^a-zA-Z_0-9]([a-zA-Z][a-zA-Z_0-9]*) *=[^=].*\1 *=[^=]'  >$TMP && printf "\nPossibly written 2x before read\n"
 #cat $TMP | tr '@' '\n'
 



More information about the ffmpeg-cvslog mailing list