[FFmpeg-cvslog] ppc: dsputil: comment formatting and wording/grammar improvements
Diego Biurrun
git at videolan.org
Thu Mar 20 21:29:50 CET 2014
ffmpeg | branch: master | Diego Biurrun <diego at biurrun.de> | Wed Jan 15 11:24:43 2014 +0100| [82ee14d2cedd7867920529b408ed6c7ec2f13ff1] | committer: Diego Biurrun
ppc: dsputil: comment formatting and wording/grammar improvements
> http://git.videolan.org/gitweb.cgi/ffmpeg.git/?a=commit;h=82ee14d2cedd7867920529b408ed6c7ec2f13ff1
---
libavcodec/ppc/dsputil_altivec.c | 233 +++++++++++++++++++-------------------
libavcodec/ppc/dsputil_ppc.c | 60 +++++-----
libavcodec/ppc/fdct_altivec.c | 7 +-
libavcodec/ppc/fft_altivec.c | 12 +-
libavcodec/ppc/gmc_altivec.c | 40 +++----
libavcodec/ppc/idct_altivec.c | 13 +--
libavcodec/ppc/int_altivec.c | 14 +--
7 files changed, 180 insertions(+), 199 deletions(-)
diff --git a/libavcodec/ppc/dsputil_altivec.c b/libavcodec/ppc/dsputil_altivec.c
index 9342728..9cc8caf 100644
--- a/libavcodec/ppc/dsputil_altivec.c
+++ b/libavcodec/ppc/dsputil_altivec.c
@@ -47,27 +47,27 @@ static int sad16_x2_altivec(void *v, uint8_t *pix1, uint8_t *pix2, int line_size
sad = (vector unsigned int)vec_splat_u32(0);
for (i = 0; i < h; i++) {
/* Read unaligned pixels into our vectors. The vectors are as follows:
- pix1v: pix1[0]-pix1[15]
- pix2v: pix2[0]-pix2[15] pix2iv: pix2[1]-pix2[16] */
+ * pix1v: pix1[0] - pix1[15]
+ * pix2v: pix2[0] - pix2[15] pix2iv: pix2[1] - pix2[16] */
pix1v = vec_ld( 0, pix1);
pix2l = vec_ld( 0, pix2);
pix2r = vec_ld(16, pix2);
pix2v = vec_perm(pix2l, pix2r, perm1);
pix2iv = vec_perm(pix2l, pix2r, perm2);
- /* Calculate the average vector */
+ /* Calculate the average vector. */
avgv = vec_avg(pix2v, pix2iv);
- /* Calculate a sum of abs differences vector */
+ /* Calculate a sum of abs differences vector. */
t5 = vec_sub(vec_max(pix1v, avgv), vec_min(pix1v, avgv));
- /* Add each 4 pixel group together and put 4 results into sad */
+ /* Add each 4 pixel group together and put 4 results into sad. */
sad = vec_sum4s(t5, sad);
pix1 += line_size;
pix2 += line_size;
}
- /* Sum up the four partial sums, and put the result into s */
+ /* Sum up the four partial sums, and put the result into s. */
sumdiffs = vec_sums((vector signed int) sad, (vector signed int) zero);
sumdiffs = vec_splat(sumdiffs, 3);
vec_ste(sumdiffs, 0, &s);
@@ -91,33 +91,33 @@ static int sad16_y2_altivec(void *v, uint8_t *pix1, uint8_t *pix2, int line_size
sad = (vector unsigned int)vec_splat_u32(0);
/* Due to the fact that pix3 = pix2 + line_size, the pix3 of one
- iteration becomes pix2 in the next iteration. We can use this
- fact to avoid a potentially expensive unaligned read, each
- time around the loop.
- Read unaligned pixels into our vectors. The vectors are as follows:
- pix2v: pix2[0]-pix2[15]
- Split the pixel vectors into shorts */
+ * iteration becomes pix2 in the next iteration. We can use this
+ * fact to avoid a potentially expensive unaligned read, each
+ * time around the loop.
+ * Read unaligned pixels into our vectors. The vectors are as follows:
+ * pix2v: pix2[0] - pix2[15]
+ * Split the pixel vectors into shorts. */
pix2l = vec_ld( 0, pix2);
pix2r = vec_ld(15, pix2);
pix2v = vec_perm(pix2l, pix2r, perm);
for (i = 0; i < h; i++) {
/* Read unaligned pixels into our vectors. The vectors are as follows:
- pix1v: pix1[0]-pix1[15]
- pix3v: pix3[0]-pix3[15] */
+ * pix1v: pix1[0] - pix1[15]
+ * pix3v: pix3[0] - pix3[15] */
pix1v = vec_ld(0, pix1);
pix2l = vec_ld( 0, pix3);
pix2r = vec_ld(15, pix3);
pix3v = vec_perm(pix2l, pix2r, perm);
- /* Calculate the average vector */
+ /* Calculate the average vector. */
avgv = vec_avg(pix2v, pix3v);
- /* Calculate a sum of abs differences vector */
+ /* Calculate a sum of abs differences vector. */
t5 = vec_sub(vec_max(pix1v, avgv), vec_min(pix1v, avgv));
- /* Add each 4 pixel group together and put 4 results into sad */
+ /* Add each 4 pixel group together and put 4 results into sad. */
sad = vec_sum4s(t5, sad);
pix1 += line_size;
@@ -126,7 +126,7 @@ static int sad16_y2_altivec(void *v, uint8_t *pix1, uint8_t *pix2, int line_size
}
- /* Sum up the four partial sums, and put the result into s */
+ /* Sum up the four partial sums, and put the result into s. */
sumdiffs = vec_sums((vector signed int) sad, (vector signed int) zero);
sumdiffs = vec_splat(sumdiffs, 3);
vec_ste(sumdiffs, 0, &s);
@@ -157,12 +157,12 @@ static int sad16_xy2_altivec(void *v, uint8_t *pix1, uint8_t *pix2, int line_siz
s = 0;
/* Due to the fact that pix3 = pix2 + line_size, the pix3 of one
- iteration becomes pix2 in the next iteration. We can use this
- fact to avoid a potentially expensive unaligned read, as well
- as some splitting, and vector addition each time around the loop.
- Read unaligned pixels into our vectors. The vectors are as follows:
- pix2v: pix2[0]-pix2[15] pix2iv: pix2[1]-pix2[16]
- Split the pixel vectors into shorts */
+ * iteration becomes pix2 in the next iteration. We can use this
+ * fact to avoid a potentially expensive unaligned read, as well
+ * as some splitting, and vector addition each time around the loop.
+ * Read unaligned pixels into our vectors. The vectors are as follows:
+ * pix2v: pix2[0] - pix2[15] pix2iv: pix2[1] - pix2[16]
+ * Split the pixel vectors into shorts. */
pix2l = vec_ld( 0, pix2);
pix2r = vec_ld(16, pix2);
pix2v = vec_perm(pix2l, pix2r, perm1);
@@ -177,8 +177,8 @@ static int sad16_xy2_altivec(void *v, uint8_t *pix1, uint8_t *pix2, int line_siz
for (i = 0; i < h; i++) {
/* Read unaligned pixels into our vectors. The vectors are as follows:
- pix1v: pix1[0]-pix1[15]
- pix3v: pix3[0]-pix3[15] pix3iv: pix3[1]-pix3[16] */
+ * pix1v: pix1[0] - pix1[15]
+ * pix3v: pix3[0] - pix3[15] pix3iv: pix3[1] - pix3[16] */
pix1v = vec_ld(0, pix1);
pix2l = vec_ld( 0, pix3);
@@ -187,40 +187,40 @@ static int sad16_xy2_altivec(void *v, uint8_t *pix1, uint8_t *pix2, int line_siz
pix3iv = vec_perm(pix2l, pix2r, perm2);
/* Note that AltiVec does have vec_avg, but this works on vector pairs
- and rounds up. We could do avg(avg(a,b),avg(c,d)), but the rounding
- would mean that, for example, avg(3,0,0,1) = 2, when it should be 1.
- Instead, we have to split the pixel vectors into vectors of shorts,
- and do the averaging by hand. */
+ * and rounds up. We could do avg(avg(a, b), avg(c, d)), but the
+ * rounding would mean that, for example, avg(3, 0, 0, 1) = 2, when
+ * it should be 1. Instead, we have to split the pixel vectors into
+ * vectors of shorts and do the averaging by hand. */
- /* Split the pixel vectors into shorts */
+ /* Split the pixel vectors into shorts. */
pix3hv = (vector unsigned short) vec_mergeh(zero, pix3v);
pix3lv = (vector unsigned short) vec_mergel(zero, pix3v);
pix3ihv = (vector unsigned short) vec_mergeh(zero, pix3iv);
pix3ilv = (vector unsigned short) vec_mergel(zero, pix3iv);
- /* Do the averaging on them */
+ /* Do the averaging on them. */
t3 = vec_add(pix3hv, pix3ihv);
t4 = vec_add(pix3lv, pix3ilv);
avghv = vec_sr(vec_add(vec_add(t1, t3), two), two);
avglv = vec_sr(vec_add(vec_add(t2, t4), two), two);
- /* Pack the shorts back into a result */
+ /* Pack the shorts back into a result. */
avgv = vec_pack(avghv, avglv);
- /* Calculate a sum of abs differences vector */
+ /* Calculate a sum of abs differences vector. */
t5 = vec_sub(vec_max(pix1v, avgv), vec_min(pix1v, avgv));
- /* Add each 4 pixel group together and put 4 results into sad */
+ /* Add each 4 pixel group together and put 4 results into sad. */
sad = vec_sum4s(t5, sad);
pix1 += line_size;
pix3 += line_size;
- /* Transfer the calculated values for pix3 into pix2 */
+ /* Transfer the calculated values for pix3 into pix2. */
t1 = t3;
t2 = t4;
}
- /* Sum up the four partial sums, and put the result into s */
+ /* Sum up the four partial sums, and put the result into s. */
sumdiffs = vec_sums((vector signed int) sad, (vector signed int) zero);
sumdiffs = vec_splat(sumdiffs, 3);
vec_ste(sumdiffs, 0, &s);
@@ -242,25 +242,25 @@ static int sad16_altivec(void *v, uint8_t *pix1, uint8_t *pix2, int line_size, i
for (i = 0; i < h; i++) {
- /* Read potentially unaligned pixels into t1 and t2 */
+ /* Read potentially unaligned pixels into t1 and t2. */
vector unsigned char pix2l = vec_ld( 0, pix2);
vector unsigned char pix2r = vec_ld(15, pix2);
t1 = vec_ld(0, pix1);
t2 = vec_perm(pix2l, pix2r, perm);
- /* Calculate a sum of abs differences vector */
+ /* Calculate a sum of abs differences vector. */
t3 = vec_max(t1, t2);
t4 = vec_min(t1, t2);
t5 = vec_sub(t3, t4);
- /* Add each 4 pixel group together and put 4 results into sad */
+ /* Add each 4 pixel group together and put 4 results into sad. */
sad = vec_sum4s(t5, sad);
pix1 += line_size;
pix2 += line_size;
}
- /* Sum up the four partial sums, and put the result into s */
+ /* Sum up the four partial sums, and put the result into s. */
sumdiffs = vec_sums((vector signed int) sad, (vector signed int) zero);
sumdiffs = vec_splat(sumdiffs, 3);
vec_ste(sumdiffs, 0, &s);
@@ -283,9 +283,9 @@ static int sad8_altivec(void *v, uint8_t *pix1, uint8_t *pix2, int line_size, in
sad = (vector unsigned int)vec_splat_u32(0);
for (i = 0; i < h; i++) {
- /* Read potentially unaligned pixels into t1 and t2
- Since we're reading 16 pixels, and actually only want 8,
- mask out the last 8 pixels. The 0s don't change the sum. */
+ /* Read potentially unaligned pixels into t1 and t2.
+ * Since we're reading 16 pixels, and actually only want 8,
+ * mask out the last 8 pixels. The 0s don't change the sum. */
vector unsigned char pix1l = vec_ld(0, pix1);
vector unsigned char pix1r = vec_ld(7, pix1);
vector unsigned char pix2l = vec_ld(0, pix2);
@@ -293,19 +293,19 @@ static int sad8_altivec(void *v, uint8_t *pix1, uint8_t *pix2, int line_size, in
t1 = vec_and(vec_perm(pix1l, pix1r, perm1), permclear);
t2 = vec_and(vec_perm(pix2l, pix2r, perm2), permclear);
- /* Calculate a sum of abs differences vector */
+ /* Calculate a sum of abs differences vector. */
t3 = vec_max(t1, t2);
t4 = vec_min(t1, t2);
t5 = vec_sub(t3, t4);
- /* Add each 4 pixel group together and put 4 results into sad */
+ /* Add each 4 pixel group together and put 4 results into sad. */
sad = vec_sum4s(t5, sad);
pix1 += line_size;
pix2 += line_size;
}
- /* Sum up the four partial sums, and put the result into s */
+ /* Sum up the four partial sums, and put the result into s. */
sumdiffs = vec_sums((vector signed int) sad, (vector signed int) zero);
sumdiffs = vec_splat(sumdiffs, 3);
vec_ste(sumdiffs, 0, &s);
@@ -327,17 +327,17 @@ static int pix_norm1_altivec(uint8_t *pix, int line_size)
s = 0;
for (i = 0; i < 16; i++) {
- /* Read in the potentially unaligned pixels */
+ /* Read the potentially unaligned pixels. */
vector unsigned char pixl = vec_ld( 0, pix);
vector unsigned char pixr = vec_ld(15, pix);
pixv = vec_perm(pixl, pixr, perm);
- /* Square the values, and add them to our sum */
+ /* Square the values, and add them to our sum. */
sv = vec_msum(pixv, pixv, sv);
pix += line_size;
}
- /* Sum up the four partial sums, and put the result into s */
+ /* Sum up the four partial sums, and put the result into s. */
sum = vec_sums((vector signed int) sv, (vector signed int) zero);
sum = vec_splat(sum, 3);
vec_ste(sum, 0, &s);
@@ -345,11 +345,8 @@ static int pix_norm1_altivec(uint8_t *pix, int line_size)
return s;
}
-/**
- * Sum of Squared Errors for a 8x8 block.
- * AltiVec-enhanced.
- * It's the sad8_altivec code above w/ squaring added.
- */
+/* Sum of Squared Errors for an 8x8 block, AltiVec-enhanced.
+ * It's the sad8_altivec code above w/ squaring added. */
static int sse8_altivec(void *v, uint8_t *pix1, uint8_t *pix2, int line_size, int h)
{
int i;
@@ -365,9 +362,9 @@ static int sse8_altivec(void *v, uint8_t *pix1, uint8_t *pix2, int line_size, in
sum = (vector unsigned int)vec_splat_u32(0);
for (i = 0; i < h; i++) {
- /* Read potentially unaligned pixels into t1 and t2
- Since we're reading 16 pixels, and actually only want 8,
- mask out the last 8 pixels. The 0s don't change the sum. */
+ /* Read potentially unaligned pixels into t1 and t2.
+ * Since we're reading 16 pixels, and actually only want 8,
+ * mask out the last 8 pixels. The 0s don't change the sum. */
vector unsigned char pix1l = vec_ld(0, pix1);
vector unsigned char pix1r = vec_ld(7, pix1);
vector unsigned char pix2l = vec_ld(0, pix2);
@@ -376,21 +373,21 @@ static int sse8_altivec(void *v, uint8_t *pix1, uint8_t *pix2, int line_size, in
t2 = vec_and(vec_perm(pix2l, pix2r, perm2), permclear);
/* Since we want to use unsigned chars, we can take advantage
- of the fact that abs(a-b)^2 = (a-b)^2. */
+ * of the fact that abs(a - b) ^ 2 = (a - b) ^ 2. */
- /* Calculate abs differences vector */
+ /* Calculate abs differences vector. */
t3 = vec_max(t1, t2);
t4 = vec_min(t1, t2);
t5 = vec_sub(t3, t4);
- /* Square the values and add them to our sum */
+ /* Square the values and add them to our sum. */
sum = vec_msum(t5, t5, sum);
pix1 += line_size;
pix2 += line_size;
}
- /* Sum up the four partial sums, and put the result into s */
+ /* Sum up the four partial sums, and put the result into s. */
sumsqr = vec_sums((vector signed int) sum, (vector signed int) zero);
sumsqr = vec_splat(sumsqr, 3);
vec_ste(sumsqr, 0, &s);
@@ -398,11 +395,8 @@ static int sse8_altivec(void *v, uint8_t *pix1, uint8_t *pix2, int line_size, in
return s;
}
-/**
- * Sum of Squared Errors for a 16x16 block.
- * AltiVec-enhanced.
- * It's the sad16_altivec code above w/ squaring added.
- */
+/* Sum of Squared Errors for a 16x16 block, AltiVec-enhanced.
+ * It's the sad16_altivec code above w/ squaring added. */
static int sse16_altivec(void *v, uint8_t *pix1, uint8_t *pix2, int line_size, int h)
{
int i;
@@ -416,28 +410,28 @@ static int sse16_altivec(void *v, uint8_t *pix1, uint8_t *pix2, int line_size, i
sum = (vector unsigned int)vec_splat_u32(0);
for (i = 0; i < h; i++) {
- /* Read potentially unaligned pixels into t1 and t2 */
+ /* Read potentially unaligned pixels into t1 and t2. */
vector unsigned char pix2l = vec_ld( 0, pix2);
vector unsigned char pix2r = vec_ld(15, pix2);
t1 = vec_ld(0, pix1);
t2 = vec_perm(pix2l, pix2r, perm);
/* Since we want to use unsigned chars, we can take advantage
- of the fact that abs(a-b)^2 = (a-b)^2. */
+ * of the fact that abs(a - b) ^ 2 = (a - b) ^ 2. */
- /* Calculate abs differences vector */
+ /* Calculate abs differences vector. */
t3 = vec_max(t1, t2);
t4 = vec_min(t1, t2);
t5 = vec_sub(t3, t4);
- /* Square the values and add them to our sum */
+ /* Square the values and add them to our sum. */
sum = vec_msum(t5, t5, sum);
pix1 += line_size;
pix2 += line_size;
}
- /* Sum up the four partial sums, and put the result into s */
+ /* Sum up the four partial sums, and put the result into s. */
sumsqr = vec_sums((vector signed int) sum, (vector signed int) zero);
sumsqr = vec_splat(sumsqr, 3);
vec_ste(sumsqr, 0, &s);
@@ -459,18 +453,18 @@ static int pix_sum_altivec(uint8_t * pix, int line_size)
sad = (vector unsigned int)vec_splat_u32(0);
for (i = 0; i < 16; i++) {
- /* Read the potentially unaligned 16 pixels into t1 */
+ /* Read the potentially unaligned 16 pixels into t1. */
vector unsigned char pixl = vec_ld( 0, pix);
vector unsigned char pixr = vec_ld(15, pix);
t1 = vec_perm(pixl, pixr, perm);
- /* Add each 4 pixel group together and put 4 results into sad */
+ /* Add each 4 pixel group together and put 4 results into sad. */
sad = vec_sum4s(t1, sad);
pix += line_size;
}
- /* Sum up the four partial sums, and put the result into s */
+ /* Sum up the four partial sums, and put the result into s. */
sumdiffs = vec_sums((vector signed int) sad, (vector signed int) zero);
sumdiffs = vec_splat(sumdiffs, 3);
vec_ste(sumdiffs, 0, &s);
@@ -487,6 +481,9 @@ static void get_pixels_altivec(int16_t *restrict block, const uint8_t *pixels, i
vector signed short shorts;
for (i = 0; i < 8; i++) {
+ /* Read potentially unaligned pixels.
+ * We're reading 16 pixels, and actually only want 8,
+ * but we simply ignore the extras. */
// Read potentially unaligned pixels.
// We're reading 16 pixels, and actually only want 8,
// but we simply ignore the extras.
@@ -494,10 +491,10 @@ static void get_pixels_altivec(int16_t *restrict block, const uint8_t *pixels, i
vector unsigned char pixr = vec_ld(7, pixels);
bytes = vec_perm(pixl, pixr, perm);
- // convert the bytes into shorts
+ // Convert the bytes into shorts.
shorts = (vector signed short)vec_mergeh(zero, bytes);
- // save the data to the block, we assume the block is 16-byte aligned
+ // Save the data to the block, we assume the block is 16-byte aligned.
vec_st(shorts, i*16, (vector signed short*)block);
pixels += line_size;
@@ -515,60 +512,59 @@ static void diff_pixels_altivec(int16_t *restrict block, const uint8_t *s1,
vector signed short shorts1, shorts2;
for (i = 0; i < 4; i++) {
- // Read potentially unaligned pixels
- // We're reading 16 pixels, and actually only want 8,
- // but we simply ignore the extras.
+ /* Read potentially unaligned pixels.
+ * We're reading 16 pixels, and actually only want 8,
+ * but we simply ignore the extras. */
pixl = vec_ld( 0, s1);
pixr = vec_ld(15, s1);
bytes = vec_perm(pixl, pixr, perm1);
- // convert the bytes into shorts
+ // Convert the bytes into shorts.
shorts1 = (vector signed short)vec_mergeh(zero, bytes);
- // Do the same for the second block of pixels
+ // Do the same for the second block of pixels.
pixl = vec_ld( 0, s2);
pixr = vec_ld(15, s2);
bytes = vec_perm(pixl, pixr, perm2);
- // convert the bytes into shorts
+ // Convert the bytes into shorts.
shorts2 = (vector signed short)vec_mergeh(zero, bytes);
- // Do the subtraction
+ // Do the subtraction.
shorts1 = vec_sub(shorts1, shorts2);
- // save the data to the block, we assume the block is 16-byte aligned
+ // Save the data to the block, we assume the block is 16-byte aligned.
vec_st(shorts1, 0, (vector signed short*)block);
s1 += stride;
s2 += stride;
block += 8;
+ /* The code below is a copy of the code above...
+ * This is a manual unroll. */
- // The code below is a copy of the code above... This is a manual
- // unroll.
-
- // Read potentially unaligned pixels
- // We're reading 16 pixels, and actually only want 8,
- // but we simply ignore the extras.
+ /* Read potentially unaligned pixels.
+ * We're reading 16 pixels, and actually only want 8,
+ * but we simply ignore the extras. */
pixl = vec_ld( 0, s1);
pixr = vec_ld(15, s1);
bytes = vec_perm(pixl, pixr, perm1);
- // convert the bytes into shorts
+ // Convert the bytes into shorts.
shorts1 = (vector signed short)vec_mergeh(zero, bytes);
- // Do the same for the second block of pixels
+ // Do the same for the second block of pixels.
pixl = vec_ld( 0, s2);
pixr = vec_ld(15, s2);
bytes = vec_perm(pixl, pixr, perm2);
- // convert the bytes into shorts
+ // Convert the bytes into shorts.
shorts2 = (vector signed short)vec_mergeh(zero, bytes);
- // Do the subtraction
+ // Do the subtraction.
shorts1 = vec_sub(shorts1, shorts2);
- // save the data to the block, we assume the block is 16-byte aligned
+ // Save the data to the block, we assume the block is 16-byte aligned.
vec_st(shorts1, 0, (vector signed short*)block);
s1 += stride;
@@ -595,14 +591,14 @@ static void add_bytes_altivec(uint8_t *dst, uint8_t *src, int w) {
register int i;
register vector unsigned char vdst, vsrc;
- /* dst and src are 16 bytes-aligned (guaranteed) */
+ /* dst and src are 16 bytes-aligned (guaranteed). */
for (i = 0 ; (i + 15) < w ; i+=16) {
vdst = vec_ld(i, (unsigned char*)dst);
vsrc = vec_ld(i, (unsigned char*)src);
vdst = vec_add(vsrc, vdst);
vec_st(vdst, i, (unsigned char*)dst);
}
- /* if w is not a multiple of 16 */
+ /* If w is not a multiple of 16. */
for (; (i < w) ; i++) {
dst[i] = src[i];
}
@@ -643,8 +639,8 @@ static int hadamard8_diff8x8_altivec(/*MpegEncContext*/ void *s, uint8_t *dst, u
dst1 = vec_ld(stride * i, dst); \
dst2 = vec_ld((stride * i) + 15, dst); \
dstO = vec_perm(dst1, dst2, vec_lvsl(stride * i, dst)); \
- /* promote the unsigned chars to signed shorts */ \
- /* we're in the 8x8 function, we only care for the first 8 */ \
+ /* Promote the unsigned chars to signed shorts. */ \
+ /* We're in the 8x8 function, we only care for the first 8. */ \
srcV = (vector signed short)vec_mergeh((vector signed char)vzero, \
(vector signed char)srcO); \
dstV = (vector signed short)vec_mergeh((vector signed char)vzero, \
@@ -713,24 +709,23 @@ static int hadamard8_diff8x8_altivec(/*MpegEncContext*/ void *s, uint8_t *dst, u
}
/*
-16x8 works with 16 elements; it allows to avoid replicating loads, and
-give the compiler more rooms for scheduling. It's only used from
-inside hadamard8_diff16_altivec.
-
-Unfortunately, it seems gcc-3.3 is a bit dumb, and the compiled code has a LOT
-of spill code, it seems gcc (unlike xlc) cannot keep everything in registers
-by itself. The following code include hand-made registers allocation. It's not
-clean, but on a 7450 the resulting code is much faster (best case fall from
-700+ cycles to 550).
-
-xlc doesn't add spill code, but it doesn't know how to schedule for the 7450,
-and its code isn't much faster than gcc-3.3 on the 7450 (but uses 25% less
-instructions...)
-
-On the 970, the hand-made RA is still a win (around 690 vs. around 780), but
-xlc goes to around 660 on the regular C code...
-*/
-
+ * 16x8 works with 16 elements; it allows to avoid replicating loads, and
+ * gives the compiler more room for scheduling. It's only used from
+ * inside hadamard8_diff16_altivec.
+ *
+ * Unfortunately, it seems gcc-3.3 is a bit dumb, and the compiled code has
+ * a LOT of spill code, it seems gcc (unlike xlc) cannot keep everything in
+ * registers by itself. The following code includes hand-made register
+ * allocation. It's not clean, but on a 7450 the resulting code is much faster
+ * (best case falls from 700+ cycles to 550).
+ *
+ * xlc doesn't add spill code, but it doesn't know how to schedule for the
+ * 7450, and its code isn't much faster than gcc-3.3 on the 7450 (but uses
+ * 25% fewer instructions...)
+ *
+ * On the 970, the hand-made RA is still a win (around 690 vs. around 780),
+ * but xlc goes to around 660 on the regular C code...
+ */
static int hadamard8_diff16x8_altivec(/*MpegEncContext*/ void *s, uint8_t *dst, uint8_t *src, int stride, int h) {
int sum;
register vector signed short
@@ -805,7 +800,7 @@ static int hadamard8_diff16x8_altivec(/*MpegEncContext*/ void *s, uint8_t *dst,
dst1 = vec_ld(stride * i, dst); \
dst2 = vec_ld((stride * i) + 16, dst); \
dstO = vec_perm(dst1, dst2, vec_lvsl(stride * i, dst)); \
- /* promote the unsigned chars to signed shorts */ \
+ /* Promote the unsigned chars to signed shorts. */ \
srcV = (vector signed short)vec_mergeh((vector signed char)vzero, \
(vector signed char)srcO); \
dstV = (vector signed short)vec_mergeh((vector signed char)vzero, \
diff --git a/libavcodec/ppc/dsputil_ppc.c b/libavcodec/ppc/dsputil_ppc.c
index 8600abb..76b53ca 100644
--- a/libavcodec/ppc/dsputil_ppc.c
+++ b/libavcodec/ppc/dsputil_ppc.c
@@ -32,24 +32,23 @@
/* ***** WARNING ***** WARNING ***** WARNING ***** */
/*
-clear_blocks_dcbz32_ppc will not work properly on PowerPC processors with a
-cache line size not equal to 32 bytes.
-Fortunately all processor used by Apple up to at least the 7450 (aka second
-generation G4) use 32 bytes cache line.
-This is due to the use of the 'dcbz' instruction. It simply clear to zero a
-single cache line, so you need to know the cache line size to use it !
-It's absurd, but it's fast...
-
-update 24/06/2003 : Apple released yesterday the G5, with a PPC970. cache line
-size: 128 bytes. Oups.
-The semantic of dcbz was changed, it always clear 32 bytes. so the function
-below will work, but will be slow. So I fixed check_dcbz_effect to use dcbzl,
-which is defined to clear a cache line (as dcbz before). So we still can
-distinguish, and use dcbz (32 bytes) or dcbzl (one cache line) as required.
-
-see <http://developer.apple.com/technotes/tn/tn2087.html>
-and <http://developer.apple.com/technotes/tn/tn2086.html>
-*/
+ * clear_blocks_dcbz32_ppc will not work properly on PowerPC processors with
+ * a cache line size not equal to 32 bytes. Fortunately all processors used
+ * by Apple up to at least the 7450 (AKA second generation G4) use 32-byte
+ * cache lines. This is due to the use of the 'dcbz' instruction. It simply
+ * clears a single cache line to zero, so you need to know the cache line
+ * size to use it! It's absurd, but it's fast...
+ *
+ * update 24/06/2003: Apple released the G5 yesterday, with a PPC970.
+ * cache line size: 128 bytes. Oups.
+ * The semantics of dcbz was changed, it always clears 32 bytes. So the function
+ * below will work, but will be slow. So I fixed check_dcbz_effect to use dcbzl,
+ * which is defined to clear a cache line (as dcbz before). So we can still
+ * distinguish, and use dcbz (32 bytes) or dcbzl (one cache line) as required.
+ *
+ * see <http://developer.apple.com/technotes/tn/tn2087.html>
+ * and <http://developer.apple.com/technotes/tn/tn2086.html>
+ */
static void clear_blocks_dcbz32_ppc(int16_t *blocks)
{
register int misal = ((unsigned long)blocks & 0x00000010);
@@ -73,17 +72,17 @@ static void clear_blocks_dcbz32_ppc(int16_t *blocks)
}
}
-/* same as above, when dcbzl clear a whole 128B cache line
- i.e. the PPC970 aka G5 */
+/* Same as above, when dcbzl clears a whole 128 bytes cache line
+ * i.e. the PPC970 AKA G5. */
#if HAVE_DCBZL
static void clear_blocks_dcbz128_ppc(int16_t *blocks)
{
register int misal = ((unsigned long)blocks & 0x0000007f);
register int i = 0;
if (misal) {
- // we could probably also optimize this case,
- // but there's not much point as the machines
- // aren't available yet (2003-06-26)
+ /* We could probably also optimize this case,
+ * but there's not much point as the machines
+ * aren't available yet (2003-06-26). */
memset(blocks, 0, sizeof(int16_t)*6*64);
}
else
@@ -99,11 +98,10 @@ static void clear_blocks_dcbz128_ppc(int16_t *blocks)
#endif
#if HAVE_DCBZL
-/* check dcbz report how many bytes are set to 0 by dcbz */
-/* update 24/06/2003 : replace dcbz by dcbzl to get
- the intended effect (Apple "fixed" dcbz)
- unfortunately this cannot be used unless the assembler
- knows about dcbzl ... */
+/* Check dcbz report how many bytes are set to 0 by dcbz. */
+/* update 24/06/2003: Replace dcbz by dcbzl to get the intended effect
+ * (Apple "fixed" dcbz). Unfortunately this cannot be used unless the
+ * assembler knows about dcbzl ... */
static long check_dcbzl_effect(void)
{
register char *fakedata = av_malloc(1024);
@@ -120,8 +118,8 @@ static long check_dcbzl_effect(void)
memset(fakedata, 0xFF, 1024);
- /* below the constraint "b" seems to mean "Address base register"
- in gcc-3.3 / RS/6000 speaks. seems to avoid using r0, so.... */
+ /* Below the constraint "b" seems to mean "address base register"
+ * in gcc-3.3 / RS/6000 speaks. Seems to avoid using r0, so.... */
__asm__ volatile("dcbzl %0, %1" : : "b" (fakedata_middle), "r" (zero));
for (i = 0; i < 1024 ; i ++) {
@@ -144,7 +142,7 @@ av_cold void ff_dsputil_init_ppc(DSPContext *c, AVCodecContext *avctx)
{
const int high_bit_depth = avctx->bits_per_raw_sample > 8;
- // Common optimizations whether AltiVec is available or not
+ // common optimizations whether AltiVec is available or not
if (!high_bit_depth) {
switch (check_dcbzl_effect()) {
case 32:
diff --git a/libavcodec/ppc/fdct_altivec.c b/libavcodec/ppc/fdct_altivec.c
index 355a697..e777022 100644
--- a/libavcodec/ppc/fdct_altivec.c
+++ b/libavcodec/ppc/fdct_altivec.c
@@ -259,11 +259,10 @@ void ff_fdct_altivec(int16_t *block)
#undef MERGE_S16
/* }}} */
+ /* Some of the initial calculations can be done as vector short
+ * before conversion to vector float. The following code section
+ * takes advantage of this. */
-/* Some of the initial calculations can be done as vector short before
- * conversion to vector float. The following code section takes advantage
- * of this.
- */
/* fdct rows {{{ */
x0 = ((vector float)vec_add(vs16(b00), vs16(b70)));
x7 = ((vector float)vec_sub(vs16(b00), vs16(b70)));
diff --git a/libavcodec/ppc/fft_altivec.c b/libavcodec/ppc/fft_altivec.c
index 2885d3f..a9acbc5 100644
--- a/libavcodec/ppc/fft_altivec.c
+++ b/libavcodec/ppc/fft_altivec.c
@@ -27,12 +27,12 @@
#include "libavcodec/fft.h"
/**
- * Do a complex FFT with the parameters defined in ff_fft_init(). The
- * input data must be permuted before with s->revtab table. No
- * 1.0/sqrt(n) normalization is done.
- * AltiVec-enabled
- * This code assumes that the 'z' pointer is 16 bytes-aligned
- * It also assumes all FFTComplex are 8 bytes-aligned pair of float
+ * Do a complex FFT with the parameters defined in ff_fft_init().
+ * The input data must be permuted before with s->revtab table.
+ * No 1.0 / sqrt(n) normalization is done.
+ * AltiVec-enabled:
+ * This code assumes that the 'z' pointer is 16 bytes-aligned.
+ * It also assumes all FFTComplex are 8 bytes-aligned pairs of floats.
*/
void ff_fft_calc_altivec(FFTContext *s, FFTComplex *z);
diff --git a/libavcodec/ppc/gmc_altivec.c b/libavcodec/ppc/gmc_altivec.c
index 38968dd..e156e81 100644
--- a/libavcodec/ppc/gmc_altivec.c
+++ b/libavcodec/ppc/gmc_altivec.c
@@ -1,6 +1,6 @@
/*
- * GMC (Global Motion Compensation)
- * AltiVec-enabled
+ * GMC (Global Motion Compensation), AltiVec-enabled
+ *
* Copyright (c) 2003 Romain Dolbeau <romain at dolbeau.org>
*
* This file is part of Libav.
@@ -25,10 +25,8 @@
#include "libavutil/ppc/util_altivec.h"
#include "dsputil_altivec.h"
-/*
- altivec-enhanced gmc1. ATM this code assume stride is a multiple of 8,
- to preserve proper dst alignment.
-*/
+/* AltiVec-enhanced gmc1. ATM this code assumes stride is a multiple of 8
+ * to preserve proper dst alignment. */
void ff_gmc1_altivec(uint8_t *dst /* align 8 */, uint8_t *src /* align1 */, int stride, int h, int x16, int y16, int rounder)
{
const DECLARE_ALIGNED(16, unsigned short, rounder_a) = rounder;
@@ -56,18 +54,16 @@ void ff_gmc1_altivec(uint8_t *dst /* align 8 */, uint8_t *src /* align1 */, int
rounderV = vec_splat((vec_u16)vec_lde(0, &rounder_a), 0);
- // we'll be able to pick-up our 9 char elements
- // at src from those 32 bytes
- // we load the first batch here, as inside the loop
- // we can re-use 'src+stride' from one iteration
- // as the 'src' of the next.
+ /* we'll be able to pick-up our 9 char elements at src from those
+ * 32 bytes we load the first batch here, as inside the loop we can
+ * reuse 'src + stride' from one iteration as the 'src' of the next. */
src_0 = vec_ld(0, src);
src_1 = vec_ld(16, src);
srcvA = vec_perm(src_0, src_1, vec_lvsl(0, src));
if (src_really_odd != 0x0000000F) {
- // if src & 0xF == 0xF, then (src+1) is properly aligned
- // on the second vector.
+ /* If src & 0xF == 0xF, then (src + 1) is properly aligned
+ * on the second vector. */
srcvB = vec_perm(src_0, src_1, vec_lvsl(1, src));
} else {
srcvB = src_1;
@@ -81,17 +77,16 @@ void ff_gmc1_altivec(uint8_t *dst /* align 8 */, uint8_t *src /* align1 */, int
dstv = vec_ld(0, dst);
- // we we'll be able to pick-up our 9 char elements
- // at src + stride from those 32 bytes
- // then reuse the resulting 2 vectors srvcC and srcvD
- // as the next srcvA and srcvB
+ /* We'll be able to pick-up our 9 char elements at src + stride from
+ * those 32 bytes then reuse the resulting 2 vectors srvcC and srcvD
+ * as the next srcvA and srcvB. */
src_0 = vec_ld(stride + 0, src);
src_1 = vec_ld(stride + 16, src);
srcvC = vec_perm(src_0, src_1, vec_lvsl(stride + 0, src));
if (src_really_odd != 0x0000000F) {
- // if src & 0xF == 0xF, then (src+1) is properly aligned
- // on the second vector.
+ /* If src & 0xF == 0xF, then (src + 1) is properly aligned
+ * on the second vector. */
srcvD = vec_perm(src_0, src_1, vec_lvsl(stride + 1, src));
} else {
srcvD = src_1;
@@ -100,10 +95,9 @@ void ff_gmc1_altivec(uint8_t *dst /* align 8 */, uint8_t *src /* align1 */, int
srcvC = vec_mergeh(vczero, srcvC);
srcvD = vec_mergeh(vczero, srcvD);
-
- // OK, now we (finally) do the math :-)
- // those four instructions replaces 32 int muls & 32 int adds.
- // isn't AltiVec nice ?
+ /* OK, now we (finally) do the math :-)
+ * Those four instructions replace 32 int muls & 32 int adds.
+ * Isn't AltiVec nice? */
tempA = vec_mladd((vector unsigned short)srcvA, Av, rounderV);
tempB = vec_mladd((vector unsigned short)srcvB, Bv, tempA);
tempC = vec_mladd((vector unsigned short)srcvC, Cv, tempB);
diff --git a/libavcodec/ppc/idct_altivec.c b/libavcodec/ppc/idct_altivec.c
index f68a61d..f602789 100644
--- a/libavcodec/ppc/idct_altivec.c
+++ b/libavcodec/ppc/idct_altivec.c
@@ -18,24 +18,19 @@
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
*/
-/*
- * NOTE: This code is based on GPL code from the libmpeg2 project. The
+/* NOTE: This code is based on GPL code from the libmpeg2 project. The
* author, Michel Lespinasses, has given explicit permission to release
* under LGPL as part of Libav.
- */
-
-/*
+ *
* Libav integration by Dieter Shirley
*
* This file is a direct copy of the AltiVec IDCT module from the libmpeg2
* project. I've deleted all of the libmpeg2-specific code, renamed the
* functions and reordered the function parameters. The only change to the
* IDCT function itself was to factor out the partial transposition, and to
- * perform a full transpose at the end of the function.
- */
-
+ * perform a full transpose at the end of the function. */
-#include <stdlib.h> /* malloc(), free() */
+#include <stdlib.h>
#include <string.h>
#include "config.h"
#if HAVE_ALTIVEC_H
diff --git a/libavcodec/ppc/int_altivec.c b/libavcodec/ppc/int_altivec.c
index 38ec99b..47204ff 100644
--- a/libavcodec/ppc/int_altivec.c
+++ b/libavcodec/ppc/int_altivec.c
@@ -19,9 +19,9 @@
*/
/**
- ** @file
- ** integer misc ops.
- **/
+ * @file
+ * miscellaneous integer operations
+ */
#include "config.h"
#if HAVE_ALTIVEC_H
@@ -43,8 +43,8 @@ static int ssd_int8_vs_int16_altivec(const int8_t *pix1, const int16_t *pix2,
int32_t score[4];
} u;
u.vscore = vec_splat_s32(0);
-//
-//XXX lazy way, fix it later
+
+// XXX lazy way, fix it later
#define vec_unaligned_load(b) \
vec_perm(vec_ld(0,b),vec_ld(15,b),vec_lvsl(0, b));
@@ -52,12 +52,12 @@ static int ssd_int8_vs_int16_altivec(const int8_t *pix1, const int16_t *pix2,
size16 = size >> 4;
while(size16) {
// score += (pix1[i]-pix2[i])*(pix1[i]-pix2[i]);
- //load pix1 and the first batch of pix2
+ // load pix1 and the first batch of pix2
vpix1 = vec_unaligned_load(pix1);
vpix2 = vec_unaligned_load(pix2);
pix2 += 8;
- //unpack
+ // unpack
vpix1h = vec_unpackh(vpix1);
vdiff = vec_sub(vpix1h, vpix2);
vpix1l = vec_unpackl(vpix1);
More information about the ffmpeg-cvslog
mailing list