[FFmpeg-cvslog] libavfilter/scale2ref: Add constants for the primary input
Kevin Mark
git at videolan.org
Fri Jun 2 00:38:26 EEST 2017
ffmpeg | branch: master | Kevin Mark <kmark937 at gmail.com> | Tue May 30 13:34:29 2017 -0400| [3385989b98be7940044e4f0a6b431a0a00abf2fa] | committer: Michael Niedermayer
libavfilter/scale2ref: Add constants for the primary input
Variables pertaining to the main video are now available when
using the scale2ref filter. This allows, as an example, scaling a
video with another as a reference point while maintaining the
original aspect ratio of the primary/non-reference video.
Consider the following graph: scale2ref=iw/6:-1 [main][ref]
This will scale [main] to 1/6 the width of [ref] while maintaining
the aspect ratio. This works well when the AR of [ref] is equal to
the AR of [main] only. What the above filter really does is
maintain the AR of [ref] when scaling [main]. So in all non-same-AR
situations [main] will appear stretched or compressed to conform to
the same AR of the reference video. Without doing this calculation
externally there is no way to scale in reference to another input
while maintaining AR in libavfilter.
To make this possible, we introduce eight new constants to be used
in the w and h expressions only in the scale2ref filter:
* main_w/main_h: width/height of the main input video
* main_a: aspect ratio of the main input video
* main_sar: sample aspect ratio of the main input video
* main_dar: display aspect ratio of the main input video
* main_hsub/main_vsub: horiz/vert chroma subsample vals of main
* mdar: a shorthand alias of main_dar
Of course, not all of these constants are needed for maintaining the
AR, but adding additional constants in line of what is available for
in/out allows for other scaling possibilities I have not imagined.
So to now scale a video to 1/6 the size of another video using the
width and maintaining its own aspect ratio you can do this:
scale2ref=iw/6:ow/mdar [main][ref]
This is ideal for picture-in-picture configurations where you could
have a square or 4:3 video overlaid on a corner of a larger 16:9
feed all while keeping the scaled video in the corner at its correct
aspect ratio and always the same size relative to the larger video.
I've tried to re-use as much code as possible. I could not find a way
to avoid duplication of the var_names array. It must now be kept in
sync with the other (the normal one and the scale2ref one) for
everything to work which does not seem ideal. For every new variable
introduced/removed into/from the normal scale filter one must be
added/removed to/from the scale2ref version. Suggestions on how to
avoid var_names duplication are welcome.
var_values has been increased to always be large enough for the
additional scale2ref variables. I do not forsee this being a problem
as the names variable will always be the correct size. From my
understanding of av_expr_parse_and_eval it will stop processing
variables when it runs out of names even though there may be
additional (potentially uninitialized) entries in the values array.
The ideal solution here would be using a variable-length array but
that is unsupported in C90.
This patch does not remove any functionality and is strictly a
feature patch. There are no API changes. Behavior does not change for
any previously valid inputs.
The applicable documentation has also been updated.
Signed-off-by: Kevin Mark <kmark937 at gmail.com>
Signed-off-by: Michael Niedermayer <michael at niedermayer.cc>
> http://git.videolan.org/gitweb.cgi/ffmpeg.git/?a=commit;h=3385989b98be7940044e4f0a6b431a0a00abf2fa
---
doc/filters.texi | 26 ++++++++++++++++++-
libavfilter/scale.c | 72 ++++++++++++++++++++++++++++++++++++++++++++++++++---
2 files changed, 93 insertions(+), 5 deletions(-)
diff --git a/doc/filters.texi b/doc/filters.texi
index 51fb6cdcee..d4fbb5ac9b 100644
--- a/doc/filters.texi
+++ b/doc/filters.texi
@@ -12459,7 +12459,31 @@ Supersampling
Scale (resize) the input video, based on a reference video.
See the scale filter for available options, scale2ref supports the same but
-uses the reference video instead of the main input as basis.
+uses the reference video instead of the main input as basis. scale2ref also
+supports the following additional constants for the @option{w} and
+ at option{h} options:
+
+ at table @var
+ at item main_w
+ at item main_h
+The main input video's width and height
+
+ at item main_a
+The same as @var{main_w} / @var{main_h}
+
+ at item main_sar
+The main input video's sample aspect ratio
+
+ at item main_dar, mdar
+The main input video's display aspect ratio. Calculated from
+ at code{(main_w / main_h) * main_sar}.
+
+ at item main_hsub
+ at item main_vsub
+The main input video's horizontal and vertical chroma subsample values.
+For example for the pixel format "yuv422p" @var{hsub} is 2 and @var{vsub}
+is 1.
+ at end table
@subsection Examples
diff --git a/libavfilter/scale.c b/libavfilter/scale.c
index 50cd442849..e3a2fb5923 100644
--- a/libavfilter/scale.c
+++ b/libavfilter/scale.c
@@ -60,6 +60,49 @@ enum var_name {
VARS_NB
};
+/**
+ * This must be kept in sync with var_names so that it is always a
+ * complete list of var_names with the scale2ref specific names
+ * appended. scale2ref values must appear in the order they appear
+ * in the var_name_scale2ref enum but also be below all of the
+ * non-scale2ref specific values.
+ */
+static const char *const var_names_scale2ref[] = {
+ "PI",
+ "PHI",
+ "E",
+ "in_w", "iw",
+ "in_h", "ih",
+ "out_w", "ow",
+ "out_h", "oh",
+ "a",
+ "sar",
+ "dar",
+ "hsub",
+ "vsub",
+ "ohsub",
+ "ovsub",
+ "main_w",
+ "main_h",
+ "main_a",
+ "main_sar",
+ "main_dar", "mdar",
+ "main_hsub",
+ "main_vsub",
+ NULL
+};
+
+enum var_name_scale2ref {
+ VAR_S2R_MAIN_W,
+ VAR_S2R_MAIN_H,
+ VAR_S2R_MAIN_A,
+ VAR_S2R_MAIN_SAR,
+ VAR_S2R_MAIN_DAR, VAR_S2R_MDAR,
+ VAR_S2R_MAIN_HSUB,
+ VAR_S2R_MAIN_VSUB,
+ VARS_S2R_NB
+};
+
int ff_scale_eval_dimensions(void *log_ctx,
const char *w_expr, const char *h_expr,
AVFilterLink *inlink, AVFilterLink *outlink,
@@ -72,7 +115,16 @@ int ff_scale_eval_dimensions(void *log_ctx,
int factor_w, factor_h;
int eval_w, eval_h;
int ret;
- double var_values[VARS_NB], res;
+ const char scale2ref = outlink->src->inputs[1] == inlink;
+ double var_values[VARS_NB + VARS_S2R_NB], res;
+ const AVPixFmtDescriptor *main_desc;
+ const AVFilterLink *main_link;
+ const char *const *names = scale2ref ? var_names_scale2ref : var_names;
+
+ if (scale2ref) {
+ main_link = outlink->src->inputs[0];
+ main_desc = av_pix_fmt_desc_get(main_link->format);
+ }
var_values[VAR_PI] = M_PI;
var_values[VAR_PHI] = M_PHI;
@@ -90,20 +142,32 @@ int ff_scale_eval_dimensions(void *log_ctx,
var_values[VAR_OHSUB] = 1 << out_desc->log2_chroma_w;
var_values[VAR_OVSUB] = 1 << out_desc->log2_chroma_h;
+ if (scale2ref) {
+ var_values[VARS_NB + VAR_S2R_MAIN_W] = main_link->w;
+ var_values[VARS_NB + VAR_S2R_MAIN_H] = main_link->h;
+ var_values[VARS_NB + VAR_S2R_MAIN_A] = (double) main_link->w / main_link->h;
+ var_values[VARS_NB + VAR_S2R_MAIN_SAR] = main_link->sample_aspect_ratio.num ?
+ (double) main_link->sample_aspect_ratio.num / main_link->sample_aspect_ratio.den : 1;
+ var_values[VARS_NB + VAR_S2R_MAIN_DAR] = var_values[VARS_NB + VAR_S2R_MDAR] =
+ var_values[VARS_NB + VAR_S2R_MAIN_A] * var_values[VARS_NB + VAR_S2R_MAIN_SAR];
+ var_values[VARS_NB + VAR_S2R_MAIN_HSUB] = 1 << main_desc->log2_chroma_w;
+ var_values[VARS_NB + VAR_S2R_MAIN_VSUB] = 1 << main_desc->log2_chroma_h;
+ }
+
/* evaluate width and height */
av_expr_parse_and_eval(&res, (expr = w_expr),
- var_names, var_values,
+ names, var_values,
NULL, NULL, NULL, NULL, NULL, 0, log_ctx);
eval_w = var_values[VAR_OUT_W] = var_values[VAR_OW] = res;
if ((ret = av_expr_parse_and_eval(&res, (expr = h_expr),
- var_names, var_values,
+ names, var_values,
NULL, NULL, NULL, NULL, NULL, 0, log_ctx)) < 0)
goto fail;
eval_h = var_values[VAR_OUT_H] = var_values[VAR_OH] = res;
/* evaluate again the width, as it may depend on the output height */
if ((ret = av_expr_parse_and_eval(&res, (expr = w_expr),
- var_names, var_values,
+ names, var_values,
NULL, NULL, NULL, NULL, NULL, 0, log_ctx)) < 0)
goto fail;
eval_w = res;
More information about the ffmpeg-cvslog
mailing list