[FFmpeg-devel] [PATCH] Limited timecode support for lavd/decklink

Marton Balint cus at passwd.hu
Wed Jun 13 01:27:13 EEST 2018



On Tue, 12 Jun 2018, Dave Rice wrote:

>
>> On Jun 7, 2018, at 5:01 PM, Marton Balint <cus at passwd.hu> wrote:
>> 
>> On Thu, 7 Jun 2018, Dave Rice wrote:
>> 
>> [...]
>> 
>>> 
>>> Before I only tested with vitc but now have a serial cable connected as well and found a source tape that has distinct values for LTC and VITC timecodes. The LTC values are from 1:00:00 to 2:00:00 and the VITC values are from 07:00:00 - 08:00:00.
>>> 
>>> With the deckcontrol utility at https://github.com/bavc/deckcontrol <https://github.com/bavc/deckcontrol>, I can use the command gettimecode to grab the LTC value:
>>> 
>>> deckcontrol gettimecode
>>> Issued command 'gettimecode'
>>> TC=07:37:56:21
>>> Command sucessfully issued
>>> Error sending command (No error)
>>> 
>>> With these patches, I can only grab the vitc values:
>>> 
>>> for i in rp188vitc rp188vitc2 rp188ltc rp188any vitc vitc2 serial ; do echo -n "${i}: " ; ./ffprobe -v quiet -timecode_format "$i" -f decklink -draw_bars 0 -audio_input embedded -video_input sdi -format_code ntsc -channels 8 -raw_format yuv422p10 -i "UltraStudio Express" -select_streams v -show_entries stream_tags=timecode -of default=nw=1:nk=1 ; echo ; done
>>> rp188vitc: rp188vitc2: rp188ltc: rp188any: vitc: 01:41:44;06
>>> vitc2: 01:41:44;21
>>> serial:
>>> 
>>> Also it may be interesting in cases like this to support accepting multiple timecode inputs at once, such as "-timecode_format vitc+rp188ltc” though it would need to be contextualized more in metadata.
>>> 
>>> With a serial cable connected, I can access LTC via the deckcontrol utility but not with this patch.
>> 
>> Well, the way I understand it, deckcontrol is using a totally different timecode source: the RS422 deck control interface. In contrast, the
>> timecode capture in the patch is using the SDI (video) source.
>> 
>> If the deck does not put the LTC timecode into SDI line 10, then the driver won't be able to capture it if you specify 'rp188ltc'. I am not sure however why 'serial' does not work, but from a quick look at the SDK maybe that only works if you use the deck control capture functions…
>

> I see at 
> https://forum.blackmagicdesign.com/viewtopic.php?f=12&t=71730&p=400097&hilit=bmdTimecodeSerial#p400097 
> <https://forum.blackmagicdesign.com/viewtopic.php?f=12&t=71730&p=400097&hilit=bmdTimecodeSerial#p400097> 
> that capturing bmdTimecodeSerial is an issue there too, so this is 
> likely an issue with the sdk rather than with your patch. Otherwise I’ve 
> been testing this more and find it really useful. Hope to see this 
> merged.

Pushed, thanks for testing.

Regards,
Marton


More information about the ffmpeg-devel mailing list