[FFmpeg-devel] [PATCH v4 1/2] lavc/vaapi_encode: add support for maxframesize
Wang, Fei W
fei.w.wang at intel.com
Wed Mar 30 11:27:24 EEST 2022
> -----Original Message-----
> From: Xiang, Haihao <haihao.xiang at intel.com>
> Sent: Tuesday, March 29, 2022 8:07 PM
> To: ffmpeg-devel at ffmpeg.org
> Cc: Wang, Fei W <fei.w.wang at intel.com>; linjie.fu at intel.com
> Subject: Re: [FFmpeg-devel] [PATCH v4 1/2] lavc/vaapi_encode: add support for
> maxframesize
>
> On Tue, 2022-03-22 at 22:11 +0800, Fei Wang wrote:
> > From: Linjie Fu <linjie.fu at intel.com>
> >
> > Add support for max frame size:
> > - max_frame_size (bytes) to indicate the max allowed size for frame.
> >
> > If the frame size exceeds the limitation, encoder will to control the
> > frame size by adjusting QP value.
> > - MFS_NUM_PASSES to indicate number of passes for QP adjust.
> > - MFS_DELTA_QP to indicate adjust qp value per pass.
> >
> > To simplify the usage, default QP adjust is set to delta_qp[4] = {1, 1, 1, 1}.
> > Use new_qp for encoder if frame size exceeds the limitation:
> > new_qp = base_qp + delta_qp[0] + delta_qp[1] + ...
> >
> > ffmpeg -hwaccel vaapi -vaapi_device /dev/dri/renderD128 -f rawvideo \
> > -v verbose -s:v 352x288 -i ./input.yuv -vf format=nv12,hwupload \
> > -c:v h264_vaapi -profile:v main -g 30 -bf 3 -max_frame_size 40000 \
> > -vframes 100 -y ./max_frame_size.h264
> >
> > Max frame size was enabled since VA-API version (1, 3, 0), but query
> > is available since (1, 5, 0). It will be passed as a parameter in
> > picParam and should be set for each frame.
> >
> > Signed-off-by: Linjie Fu <linjie.fu at intel.com>
> > Signed-off-by: Fei Wang <fei.w.wang at intel.com>
> > ---
> > 1. re-send the 2 legacy patch:
> >
> https://patchwork.ffmpeg.org/project/ffmpeg/patch/20190715105936.4860-1-
> linjie.fu at intel.com/
> >
> https://patchwork.ffmpeg.org/project/ffmpeg/patch/20190715110000.5069-1-
> linjie.fu at intel.com/
> >
> > libavcodec/vaapi_encode.c | 67
> > +++++++++++++++++++++++++++++++++++++++
> > libavcodec/vaapi_encode.h | 19 +++++++++--
> > 2 files changed, 84 insertions(+), 2 deletions(-)
> >
> > diff --git a/libavcodec/vaapi_encode.c b/libavcodec/vaapi_encode.c
> > index ffd6cb1c25..b2782e6f9e 100644
> > --- a/libavcodec/vaapi_encode.c
> > +++ b/libavcodec/vaapi_encode.c
> > @@ -365,6 +365,17 @@ static int vaapi_encode_issue(AVCodecContext
> *avctx,
> > goto fail;
> > }
> >
> > +#if VA_CHECK_VERSION(1, 5, 0)
> > + if (ctx->max_frame_size) {
> > + err = vaapi_encode_make_misc_param_buffer(avctx, pic,
> > +
> > +VAEncMiscParameterTypeMultiPassFr
> > ameSize,
> > + &ctx->mfs_params,
> > + sizeof(ctx->mfs_params));
> > + if (err < 0)
> > + goto fail;
> > + }
> > +#endif
> > +
> > if (pic->type == PICTURE_TYPE_IDR) {
> > if (ctx->va_packed_headers & VA_ENC_PACKED_HEADER_SEQUENCE &&
> > ctx->codec->write_sequence_header) { @@ -1869,6 +1880,54
> > @@ rc_mode_found:
> > return 0;
> > }
> >
> > +static av_cold int vaapi_encode_init_max_frame_size(AVCodecContext
> > +*avctx) { #if VA_CHECK_VERSION(1, 5, 0)
> > + VAAPIEncodeContext *ctx = avctx->priv_data;
> > + VAConfigAttrib attr = { VAConfigAttribMaxFrameSize };
> > + VAStatus vas;
> > + int i;
> > +
> > + vas = vaGetConfigAttributes(ctx->hwctx->display,
> > + ctx->va_profile,
> > + ctx->va_entrypoint,
> > + &attr, 1);
> > + if (vas != VA_STATUS_SUCCESS) {
> > + ctx->max_frame_size = 0;
> > + av_log(avctx, AV_LOG_ERROR, "Failed to query max frame size "
> > + "config attribute: %d (%s).\n", vas, vaErrorStr(vas));
> > + return AVERROR_EXTERNAL;
> > + }
> > +
> > + if (attr.value == VA_ATTRIB_NOT_SUPPORTED) {
> > + ctx->max_frame_size = 0;
> > + av_log(avctx, AV_LOG_WARNING, "Max frame size attribute "
> > + "is not supported.\n");
> > + } else {
> > + ctx->delta_qp = av_calloc(MFS_NUM_PASSES, sizeof(uint8_t));
> > + if (!ctx->delta_qp) {
> > + return AVERROR(ENOMEM);
> > + }
> > + for (i = 0; i <MFS_NUM_PASSES; i++)
> > + ctx->delta_qp[i] = MFS_DELTA_QP;
> > +
> > + ctx->mfs_params = (VAEncMiscParameterBufferMultiPassFrameSize){
> > + .max_frame_size = ctx->max_frame_size,
> > + .num_passes = MFS_NUM_PASSES,
> > + .delta_qp = ctx->delta_qp,
> > + };
> > +
> > + av_log(avctx, AV_LOG_VERBOSE, "Max Frame Size: %d bytes.\n ",
> > + ctx->max_frame_size);
> > + }
> > +#else
> > + av_log(avctx, AV_LOG_WARNING, "Max Frame Size is "
> > + "not supported with this VA
> > +version.\n"); #endif
> > +
> > + return 0;
> > +}
> > +
> > static av_cold int vaapi_encode_init_gop_structure(AVCodecContext
> > *avctx) {
> > VAAPIEncodeContext *ctx = avctx->priv_data; @@ -2475,6 +2534,12
> > @@ av_cold int ff_vaapi_encode_init(AVCodecContext *avctx)
> > goto fail;
> > }
> >
> > + if (ctx->max_frame_size) {
> > + err = vaapi_encode_init_max_frame_size(avctx);
>
> Is this feature supported when the given rc mode is CQP ?
Yes, it can support CQP mode.
Fei
>
> Thanks
> Haihao
>
> > + if (err < 0)
> > + goto fail;
> > + }
> > +
> > vas = vaCreateConfig(ctx->hwctx->display,
> > ctx->va_profile, ctx->va_entrypoint,
> > ctx->config_attributes,
> > ctx->nb_config_attributes, @@ -2618,6 +2683,8 @@ av_cold int
> > ff_vaapi_encode_close(AVCodecContext *avctx)
> >
> > av_frame_free(&ctx->frame);
> >
> > + if (ctx->delta_qp)
> > + av_freep(&ctx->delta_qp);
> > av_freep(&ctx->codec_sequence_params);
> > av_freep(&ctx->codec_picture_params);
> > av_fifo_freep2(&ctx->encode_fifo);
> > diff --git a/libavcodec/vaapi_encode.h b/libavcodec/vaapi_encode.h
> > index 1b40819c69..72f9256a8e 100644
> > --- a/libavcodec/vaapi_encode.h
> > +++ b/libavcodec/vaapi_encode.h
> > @@ -60,6 +60,11 @@ enum {
> > PICTURE_TYPE_B = 3,
> > };
> >
> > +enum {
> > + MFS_NUM_PASSES = 4,
> > + MFS_DELTA_QP = 1,
> > +};
> > +
> > typedef struct VAAPIEncodeSlice {
> > int index;
> > int row_start;
> > @@ -191,6 +196,9 @@ typedef struct VAAPIEncodeContext {
> > // Desired B frame reference depth.
> > int desired_b_depth;
> >
> > + // Max Frame Size
> > + int max_frame_size;
> > +
> > // Explicitly set RC mode (otherwise attempt to pick from
> > // available modes).
> > int explicit_rc_mode;
> > @@ -271,7 +279,9 @@ typedef struct VAAPIEncodeContext { #if
> > VA_CHECK_VERSION(0, 36, 0)
> > VAEncMiscParameterBufferQualityLevel quality_params; #endif
> > -
> > +#if VA_CHECK_VERSION(1, 3, 0)
> > + VAEncMiscParameterBufferMultiPassFrameSize mfs_params; #endif
> > // Per-sequence parameter structure (VAEncSequenceParameterBuffer*).
> > void *codec_sequence_params;
> >
> > @@ -331,6 +341,7 @@ typedef struct VAAPIEncodeContext {
> > int idr_counter;
> > int gop_counter;
> > int end_of_stream;
> > + uint8_t *delta_qp;
> >
> > // Whether the driver supports ROI at all.
> > int roi_allowed;
> > @@ -470,7 +481,11 @@ int ff_vaapi_encode_close(AVCodecContext *avctx);
> > "Increase this to improve single channel performance. This option " \
> > "doesn't work if driver doesn't implement vaSyncBuffer function.", \
> > OFFSET(common.async_depth), AV_OPT_TYPE_INT, \
> > - { .i64 = 2 }, 1, MAX_ASYNC_DEPTH, FLAGS }
> > + { .i64 = 2 }, 1, MAX_ASYNC_DEPTH, FLAGS }, \
> > + { "max_frame_size", \
> > + "Maximum frame size (in bytes)",\
> > + OFFSET(common.max_frame_size), AV_OPT_TYPE_INT, \
> > + { .i64 = 0 }, 0, INT_MAX, FLAGS }
> >
> > #define VAAPI_ENCODE_RC_MODE(name, desc) \
> > { #name, desc, 0, AV_OPT_TYPE_CONST, { .i64 = RC_MODE_ ## name },
> > \
More information about the ffmpeg-devel
mailing list