[FFmpeg-devel] [PATCH] avformat/mov: parse the last moof box when mp4 segment format
"zhilizhao(赵志立)"
quinkblack at foxmail.com
Fri Sep 30 13:22:45 EEST 2022
> On Sep 30, 2022, at 17:50, wangyaqiang <1035567130 at qq.com> wrote:
>
>
>
>> 2022年9月29日 16:29，zhilizhao(赵志立) <quinkblack at foxmail.com <mailto:quinkblack at foxmail.com>> 写道：
>>
>>
>>
>>> On Sep 1, 2022, at 18:22, 1035567130 at qq.com <mailto:1035567130 at qq.com> wrote:
>>>
>>> From: Wang Yaqiang <wangyaqiang03 at kuaishou.com <mailto:wangyaqiang03 at kuaishou.com>>
>>>
>>> In the format of mp4 segment, the bitrate calculation of
>>> stream depends on the sample_size in moof->traf->trun box.
>>> In the original logic, when the last sidx box is read,
>>> it is not parsed backwards, and the total sample_size calculation is smaller.
>>> As a result, the bitrate displayed by ffprobe is also smaller than the actual.
>>> Increasing the moof_count variable ensures that the last moof is parsed.
>>>
>>> Test method: You can use -c copy remux a fmp4 file as mp4
>>> and ffprobe the two files will find that the bitrate is inconsistent
>>> Befor patch:
>>> Stream #0:1[0x2](und): Audio: aac (HE-AAC) (mp4a / 0x6134706D), 44100 Hz, stereo, fltp, 59 kb/s
>>> After patch:
>>> Stream #0:1[0x2](und): Audio: aac (HE-AAC) (mp4a / 0x6134706D), 44100 Hz, stereo, fltp, 96 kb/s (default)
>>>
>>> Signed-off-by: Wang Yaqiang <wangyaqiang03 at kuaishou.com <mailto:wangyaqiang03 at kuaishou.com>>
>>> ---
>>> libavformat/isom.h | 1 +
>>> libavformat/mov.c | 8 +++++++-
>>> 2 files changed, 8 insertions(+), 1 deletion(-)
>>>
>>> diff --git a/libavformat/isom.h b/libavformat/isom.h
>>> index f05c2d9c28..183a3c486b 100644
>>> --- a/libavformat/isom.h
>>> +++ b/libavformat/isom.h
>>> @@ -296,6 +296,7 @@ typedef struct MOVContext {
>>> int has_looked_for_mfra;
>>> int use_tfdt;
>>> MOVFragmentIndex frag_index;
>>> + int moof_count; //ensure last fragment parse moof box
>>> int atom_depth;
>>> unsigned int aax_mode; ///< 'aax' file has been detected
>>> uint8_t file_key[20];
>>> diff --git a/libavformat/mov.c b/libavformat/mov.c
>>> index 14550e6456..396658e342 100644
>>> --- a/libavformat/mov.c
>>> +++ b/libavformat/mov.c
>>> @@ -7784,12 +7784,15 @@ static int mov_read_default(MOVContext *c, AVIOContext *pb, MOVAtom atom)
>>> int64_t start_pos = avio_tell(pb);
>>> int64_t left;
>>> int err = parse(c, pb, a);
>>> + if (a.type == MKTAG('m','o','o','f')) {
>>> + c->moof_count ++;
>>> + }
>>> if (err < 0) {
>>> c->atom_depth --;
>>> return err;
>>> }
>>> if (c->found_moov && c->found_mdat && a.size <= INT64_MAX - start_pos &&
>>> - ((!(pb->seekable & AVIO_SEEKABLE_NORMAL) || c->fc->flags & AVFMT_FLAG_IGNIDX || c->frag_index.complete) ||
>>> + ((!(pb->seekable & AVIO_SEEKABLE_NORMAL) || c->fc->flags & AVFMT_FLAG_IGNIDX || (c->frag_index.complete && c->moof_count >= c->frag_index.nb_items)) ||
>>> start_pos + a.size == avio_size(pb))) {
>>> if (!(pb->seekable & AVIO_SEEKABLE_NORMAL) || c->fc->flags & AVFMT_FLAG_IGNIDX || c->frag_index.complete)
>>> c->next_root_atom = start_pos + a.size;
>>
>> No, it breaks the use case with global sidx. We can achieve fast
>> startup with global sidx.
>
> This patch indeed have an effect on startup, will add some option.
>
>>
>> The patch describes an issue with multiple sidx cases, actually
>> it’s more serious with global sidx. In the first case, the bitrate
>> is a little inaccurate. Bitrate is near zero for the second case.
>>
>> I have two ideas:
>>
>> 1. Just skip bitrate calculation from sc->data_size if sidx exist,
>> e.g.,
>>
>> @@ -8500,7 +8500,7 @@ static int mov_read_header(AVFormatContext *s)
>> for (i = 0; i < s->nb_streams; i++) {
>> AVStream *st = s->streams[i];
>> MOVStreamContext *sc = st->priv_data;
>> - if (st->duration > 0) {
>> + if (st->duration > 0 && !sc->has_sidx) {
>> /* Akin to sc->data_size * 8 * sc->time_scale / st->duration but accounting for overflows. */
>> st->codecpar->bit_rate = av_rescale(sc->data_size, ((int64_t) sc->time_scale) * 8, st->duration);
>> if (st->codecpar->bit_rate == INT64_MIN) {
>>
>> It’s simple, and bitrate information has multiple sources.
>>
>
> In this way, will be no bitrate info in the stream, will affect the users？
It depends. We have multiple sources to get bitrate.
>
>> 2. Add a option to prevent mark complete when reading sidx
>>
>> @@ -5446,7 +5446,7 @@ static int mov_read_sidx(MOVContext *c, AVIOContext *pb, MOVAtom atom)
>> // See if the remaining bytes are just an mfra which we can ignore.
>> is_complete = offset == stream_size;
>> - if (!is_complete && (pb->seekable & AVIO_SEEKABLE_NORMAL) && stream_size > 0 ) {
>> + if (!is_complete && (pb->seekable & AVIO_SEEKABLE_NORMAL) && stream_size > 0 && !parse_full) {
>>
>> Then
>
> Mfra box is not required in fmp4. for example, adding skip_trailer parameter when generate fm4, bitrate will still be incorrect.
You missed the point. If mfra doesn’t exist in the file,
the issue doesn’t exist neither.
>
>>
>> @@ -8500,7 +8500,7 @@ static int mov_read_header(AVFormatContext *s)
>> for (i = 0; i < s->nb_streams; i++) {
>> AVStream *st = s->streams[i];
>> MOVStreamContext *sc = st->priv_data;
>> - if (st->duration > 0) {
>> + if (st->duration > 0 && (!sc->has_sidx || parse_full)) {
>>
>> It’s such a corner case and I can’t find a suitable name for this option.
>>
>> Any ideas?
>>
>>> @@ -8361,6 +8364,9 @@ static int mov_read_header(AVFormatContext *s)
>>> av_log(s, AV_LOG_ERROR, "moov atom not found\n");
>>> return AVERROR_INVALIDDATA;
>>> }
>>> + if (mov->frag_index.nb_items > mov->moof_count) {
>>> + av_log(s, AV_LOG_WARNING, "the number of moof is less then fragment count\n");
>>> + }
>>> av_log(mov->fc, AV_LOG_TRACE, "on_parse_exit_offset=%"PRId64"\n", avio_tell(pb));
>>>
>>> if (pb->seekable & AVIO_SEEKABLE_NORMAL) {
>>> --
>>> 2.33.0
>>>
>>> _______________________________________________
>>> ffmpeg-devel mailing list
>>> ffmpeg-devel at ffmpeg.org <mailto:ffmpeg-devel at ffmpeg.org>
>>> https://ffmpeg.org/mailman/listinfo/ffmpeg-devel <https://ffmpeg.org/mailman/listinfo/ffmpeg-devel>
>>>
>>> To unsubscribe, visit link above, or email
>>> ffmpeg-devel-request at ffmpeg.org <mailto:ffmpeg-devel-request at ffmpeg.org> with subject "unsubscribe".
>>
>> _______________________________________________
>> ffmpeg-devel mailing list
>> ffmpeg-devel at ffmpeg.org <mailto:ffmpeg-devel at ffmpeg.org>
>> https://ffmpeg.org/mailman/listinfo/ffmpeg-devel <https://ffmpeg.org/mailman/listinfo/ffmpeg-devel>
>>
>> To unsubscribe, visit link above, or email
>> ffmpeg-devel-request at ffmpeg.org <mailto:ffmpeg-devel-request at ffmpeg.org> with subject "unsubscribe".
> _______________________________________________
> ffmpeg-devel mailing list
> ffmpeg-devel at ffmpeg.org
> https://ffmpeg.org/mailman/listinfo/ffmpeg-devel
>
> To unsubscribe, visit link above, or email
> ffmpeg-devel-request at ffmpeg.org with subject "unsubscribe".
More information about the ffmpeg-devel
mailing list