[FFmpeg-trac] #1694(avcodec:open): Decoding a possibly damaged aac sample fails from a specific position on
FFmpeg
trac at avcodec.org
Fri Feb 22 23:59:25 CET 2013
#1694: Decoding a possibly damaged aac sample fails from a specific position on
-------------------------------------+-------------------------------------
Reporter: cehoyos | Owner:
Type: defect | Status: open
Priority: important | Component: avcodec
Version: git-master | Resolution:
Keywords: aac | Blocked By:
regression latm | Reproduced by developer: 0
Blocking: |
Analyzed by developer: 0 |
-------------------------------------+-------------------------------------
Comment (by cehoyos):
The original sample - http://samples.ffmpeg.org/ffmpeg-
bugs/trac/ticket1694/ - is still broken in git head (works fine with 0.10,
broken in 0.11, 1.0 and 1.1).
The following two command lines produce 10 seconds of audio, followed by
silence for the remaining output file with current git head, mostly
correct sound for the whole output file with 0.10:
$ ffmpeg -ss 380 -i a.aac -t 30 out1.wav
$ ffmpeg -ss 630 -i a.aac -t 30 out2.wav
The following two command lines produce 30 seconds of audio (with all
tested versions):
$ ffmpeg -ss 400 -i a.aac -t 30 out3.wav
$ ffmpeg -ss 650 -i a.aac -t 30 out4.wav
{{{
$ ffmpeg -ss 380 -i a.aac -t 30 out1.wav
ffmpeg version N-50189-g239b88c Copyright (c) 2000-2013 the FFmpeg
developers
built on Feb 22 2013 23:46:57 with gcc 4.7 (SUSE Linux)
configuration: --enable-gpl --disable-indev=jack
libavutil 52. 17.102 / 52. 17.102
libavcodec 54. 92.100 / 54. 92.100
libavformat 54. 63.100 / 54. 63.100
libavdevice 54. 3.103 / 54. 3.103
libavfilter 3. 39.101 / 3. 39.101
libswscale 2. 2.100 / 2. 2.100
libswresample 0. 17.102 / 0. 17.102
libpostproc 52. 2.100 / 52. 2.100
[aac @ 0x1f69fc0] max_analyze_duration 5000000 reached at 5015510
microseconds
[aac @ 0x1f69fc0] Estimating duration from bitrate, this may be inaccurate
Input #0, aac, from 'a.aac':
Duration: 00:11:39.45, bitrate: 32 kb/s
Stream #0:0: Audio: aac, 44100 Hz, stereo, fltp, 31 kb/s
Output #0, wav, to 'out1.wav':
Metadata:
ISFT : Lavf54.63.100
Stream #0:0: Audio: pcm_s16le ([1][0][0][0] / 0x0001), 44100 Hz,
stereo, s16, 1411 kb/s
Stream mapping:
Stream #0:0 -> #0:0 (aac -> pcm_s16le)
Press [q] to stop, [?] for help
[aac @ 0x1f702c0] Reserved SBR extensions is not implemented. Update your
FFmpeg version to the newest one from Git. If the problem still occurs, it
means that your file has a feature which has not been implemented.
[aac @ 0x1f702c0] If you want to help, upload a sample of this file to
ftp://upload.ffmpeg.org/MPlayer/incoming/ and contact the ffmpeg-devel
mailing list.
[aac @ 0x1f702c0] Reserved SBR extensions is not implemented. Update your
FFmpeg version to the newest one from Git. If the problem still occurs, it
means that your file has a feature which has not been implemented.
[aac @ 0x1f702c0] If you want to help, upload a sample of this file to
ftp://upload.ffmpeg.org/MPlayer/incoming/ and contact the ffmpeg-devel
mailing list.
[aac @ 0x1f702c0] Reserved SBR extensions is not implemented. Update your
FFmpeg version to the newest one from Git. If the problem still occurs, it
means that your file has a feature which has not been implemented.
[aac @ 0x1f702c0] If you want to help, upload a sample of this file to
ftp://upload.ffmpeg.org/MPlayer/incoming/ and contact the ffmpeg-devel
mailing list.
[aac @ 0x1f702c0] Reserved SBR extensions is not implemented. Update your
FFmpeg version to the newest one from Git. If the problem still occurs, it
means that your file has a feature which has not been implemented.
[aac @ 0x1f702c0] If you want to help, upload a sample of this file to
ftp://upload.ffmpeg.org/MPlayer/incoming/ and contact the ffmpeg-devel
mailing list.
[aac @ 0x1f702c0] Reserved SBR extensions is not implemented. Update your
FFmpeg version to the newest one from Git. If the problem still occurs, it
means that your file has a feature which has not been implemented.
[aac @ 0x1f702c0] If you want to help, upload a sample of this file to
ftp://upload.ffmpeg.org/MPlayer/incoming/ and contact the ffmpeg-devel
mailing list.
[aac @ 0x1f702c0] Reserved SBR extensions is not implemented. Update your
FFmpeg version to the newest one from Git. If the problem still occurs, it
means that your file has a feature which has not been implemented.
[aac @ 0x1f702c0] If you want to help, upload a sample of this file to
ftp://upload.ffmpeg.org/MPlayer/incoming/ and contact the ffmpeg-devel
mailing list.
[aac @ 0x1f702c0] Reserved SBR extensions is not implemented. Update your
FFmpeg version to the newest one from Git. If the problem still occurs, it
means that your file has a feature which has not been implemented.
[aac @ 0x1f702c0] If you want to help, upload a sample of this file to
ftp://upload.ffmpeg.org/MPlayer/incoming/ and contact the ffmpeg-devel
mailing list.
[aac @ 0x1f702c0] Reserved SBR extensions is not implemented. Update your
FFmpeg version to the newest one from Git. If the problem still occurs, it
means that your file has a feature which has not been implemented.
[aac @ 0x1f702c0] If you want to help, upload a sample of this file to
ftp://upload.ffmpeg.org/MPlayer/incoming/ and contact the ffmpeg-devel
mailing list.
[aac @ 0x1f702c0] Reserved SBR extensions is not implemented. Update your
FFmpeg version to the newest one from Git. If the problem still occurs, it
means that your file has a feature which has not been implemented.
[aac @ 0x1f702c0] If you want to help, upload a sample of this file to
ftp://upload.ffmpeg.org/MPlayer/incoming/ and contact the ffmpeg-devel
mailing list.
[aac @ 0x1f702c0] Reserved bit set.
Error while decoding stream #0:0: Invalid data found when processing input
[aac @ 0x1f702c0] channel element 2.2 is not allocated
Error while decoding stream #0:0: Operation not permitted
[aac @ 0x1f702c0] channel element 3.13 is not allocated
Error while decoding stream #0:0: Operation not permitted
[aac @ 0x1f702c0] Reserved bit set.
Error while decoding stream #0:0: Invalid data found when processing input
[aac @ 0x1f702c0] Reserved bit set.
Error while decoding stream #0:0: Invalid data found when processing input
Multiple frames in a packet from stream 0
[aac @ 0x1f702c0] Sample rate index in program config element does not
match the sample rate index configured by the container.
[aac @ 0x1f702c0] decode_pce: Input buffer exhausted before END element
found
Error while decoding stream #0:0: Operation not permitted
[aac @ 0x1f702c0] Sample rate index in program config element does not
match the sample rate index configured by the container.
[aac @ 0x1f702c0] channel element 2.13 is not allocated
Error while decoding stream #0:0: Operation not permitted
[aac @ 0x1f702c0] Number of bands (48) exceeds limit (45).
Error while decoding stream #0:0: Operation not permitted
[aac @ 0x1f702c0] skip_data_stream_element: Input buffer exhausted before
END element found
Error while decoding stream #0:0: Operation not permitted
[aac @ 0x1f702c0] Number of bands (18) exceeds limit (14).
Error while decoding stream #0:0: Operation not permitted
[aac @ 0x1f702c0] channel element 3.2 is not allocated
Error while decoding stream #0:0: Operation not permitted
[aac @ 0x1f702c0] Number of bands (10) exceeds limit (7).
Error while decoding stream #0:0: Operation not permitted
[aac @ 0x1f702c0] channel element 3.5 is not allocated
Error while decoding stream #0:0: Operation not permitted
[aac @ 0x1f702c0] Reserved bit set.
Error while decoding stream #0:0: Invalid data found when processing input
[aac @ 0x1f702c0] invalid band type
Error while decoding stream #0:0: Operation not permitted
[aac @ 0x1f702c0] channel element 2.0 is not allocated
Error while decoding stream #0:0: Operation not permitted
[aac @ 0x1f702c0] Prediction is not allowed in AAC-LC.
Error while decoding stream #0:0: Invalid data found when processing input
[aac @ 0x1f702c0] Reserved bit set.
Error while decoding stream #0:0: Invalid data found when processing input
[aac @ 0x1f702c0] SBR was found before the first channel element.
[aac @ 0x1f702c0] Sample rate index in program config element does not
match the sample rate index configured by the container.
[aac @ 0x1f702c0] decode_pce: Input buffer exhausted before END element
found
Error while decoding stream #0:0: Operation not permitted
[aac @ 0x1f702c0] Number of bands (44) exceeds limit (42).
Error while decoding stream #0:0: Operation not permitted
[aac @ 0x1f702c0] channel element 2.14 is not allocated
Error while decoding stream #0:0: Operation not permitted
[aac @ 0x1f702c0] channel element 2.8 is not allocated
Error while decoding stream #0:0: Operation not permitted
[aac @ 0x1f702c0] skip_data_stream_element: Input buffer exhausted before
END element found
Error while decoding stream #0:0: Operation not permitted
[aac @ 0x1f702c0] channel element 3.15 is not allocated
Error while decoding stream #0:0: Operation not permitted
[aac @ 0x1f702c0] invalid band type
Error while decoding stream #0:0: Operation not permitted
[aac @ 0x1f702c0] Sample rate index in program config element does not
match the sample rate index configured by the container.
[aac @ 0x1f702c0] skip_data_stream_element: Input buffer exhausted before
END element found
Error while decoding stream #0:0: Operation not permitted
[aac @ 0x1f702c0] Sample rate index in program config element does not
match the sample rate index configured by the container.
[aac @ 0x1f702c0] Reserved bit set.
Error while decoding stream #0:0: Invalid data found when processing input
[aac @ 0x1f702c0] channel element 2.0 is not allocated
Error while decoding stream #0:0: Operation not permitted
[aac @ 0x1f702c0] Reserved bit set.
Error while decoding stream #0:0: Invalid data found when processing input
[aac @ 0x1f702c0] Reserved bit set.
Error while decoding stream #0:0: Invalid data found when processing input
[aac @ 0x1f702c0] Number of scalefactor bands in group (54) exceeds limit
(47).
Error while decoding stream #0:0: Invalid data found when processing input
[aac @ 0x1f702c0] Sample rate index in program config element does not
match the sample rate index configured by the container.
[aac @ 0x1f702c0] decode_pce: Input buffer exhausted before END element
found
Error while decoding stream #0:0: Operation not permitted
[aac @ 0x1f702c0] channel element 3.8 is not allocated
Error while decoding stream #0:0: Operation not permitted
[aac @ 0x1f702c0] skip_data_stream_element: Input buffer exhausted before
END element found
Error while decoding stream #0:0: Operation not permitted
[aac @ 0x1f702c0] skip_data_stream_element: Input buffer exhausted before
END element found
Error while decoding stream #0:0: Operation not permitted
[aac @ 0x1f702c0] Prediction is not allowed in AAC-LC.
Error while decoding stream #0:0: Invalid data found when processing input
[aac @ 0x1f702c0] Reserved bit set.
Error while decoding stream #0:0: Invalid data found when processing input
[aac @ 0x1f702c0] Sample rate index in program config element does not
match the sample rate index configured by the container.
[aac @ 0x1f702c0] skip_data_stream_element: Input buffer exhausted before
END element found
Error while decoding stream #0:0: Operation not permitted
[aac @ 0x1f702c0] channel element 3.12 is not allocated
Error while decoding stream #0:0: Operation not permitted
[aac @ 0x1f702c0] Prediction is not allowed in AAC-LC.
Error while decoding stream #0:0: Invalid data found when processing input
[aac @ 0x1f702c0] channel element 2.3 is not allocated
Error while decoding stream #0:0: Operation not permitted
[aac @ 0x1f702c0] Reserved bit set.
Error while decoding stream #0:0: Invalid data found when processing input
[aac @ 0x1f702c0] Sample rate index in program config element does not
match the sample rate index configured by the container.
Last message repeated 1 times
[aac @ 0x1f702c0] Not evaluating a further program_config_element as this
construct is dubious at best.
[aac @ 0x1f702c0] Sample rate index in program config element does not
match the sample rate index configured by the container.
[aac @ 0x1f702c0] decode_pce: Input buffer exhausted before END element
found
Error while decoding stream #0:0: Operation not permitted
[aac @ 0x1f702c0] decode_pce: Input buffer exhausted before END element
found
Error while decoding stream #0:0: Operation not permitted
[aac @ 0x1f702c0] Sample rate index in program config element does not
match the sample rate index configured by the container.
[aac @ 0x1f702c0] Reserved bit set.
Error while decoding stream #0:0: Invalid data found when processing input
[aac @ 0x1f702c0] Sample rate index in program config element does not
match the sample rate index configured by the container.
[aac @ 0x1f702c0] decode_pce: Input buffer exhausted before END element
found
Error while decoding stream #0:0: Operation not permitted
[aac @ 0x1f702c0] channel element 3.7 is not allocated
Error while decoding stream #0:0: Operation not permitted
[aac @ 0x1f702c0] Sample rate index in program config element does not
match the sample rate index configured by the container.
[aac @ 0x1f702c0] Reserved bit set.
Error while decoding stream #0:0: Invalid data found when processing input
[aac @ 0x1f702c0] Number of bands (6) exceeds limit (5).
Error while decoding stream #0:0: Operation not permitted
[aac @ 0x1f702c0] channel element 3.10 is not allocated
Error while decoding stream #0:0: Operation not permitted
[aac @ 0x1f702c0] channel element 3.4 is not allocated
Error while decoding stream #0:0: Operation not permitted
[aac @ 0x1f702c0] Reserved bit set.
Error while decoding stream #0:0: Invalid data found when processing input
[aac @ 0x1f702c0] Number of bands (28) exceeds limit (13).
Error while decoding stream #0:0: Operation not permitted
[aac @ 0x1f702c0] skip_data_stream_element: Input buffer exhausted before
END element found
Error while decoding stream #0:0: Operation not permitted
[aac @ 0x1f702c0] skip_data_stream_element: Input buffer exhausted before
END element found
Error while decoding stream #0:0: Operation not permitted
[aac @ 0x1f702c0] channel element 2.12 is not allocated
Error while decoding stream #0:0: Operation not permitted
[aac @ 0x1f702c0] Prediction is not allowed in AAC-LC.
Error while decoding stream #0:0: Invalid data found when processing input
[aac @ 0x1f702c0] Prediction is not allowed in AAC-LC.
Error while decoding stream #0:0: Invalid data found when processing input
[aac @ 0x1f702c0] Prediction is not allowed in AAC-LC.
Error while decoding stream #0:0: Invalid data found when processing input
[aac @ 0x1f702c0] Input buffer exhausted before END element found
Error while decoding stream #0:0: Operation not permitted
[aac @ 0x1f702c0] Reserved bit set.
Error while decoding stream #0:0: Invalid data found when processing input
[aac @ 0x1f702c0] Reserved bit set.
Error while decoding stream #0:0: Invalid data found when processing input
[aac @ 0x1f702c0] channel element 3.4 is not allocated
Error while decoding stream #0:0: Operation not permitted
[aac @ 0x1f702c0] skip_data_stream_element: Input buffer exhausted before
END element found
Error while decoding stream #0:0: Operation not permitted
[aac @ 0x1f702c0] channel element 3.14 is not allocated
Error while decoding stream #0:0: Operation not permitted
[aac @ 0x1f702c0] channel element 2.6 is not allocated
Error while decoding stream #0:0: Operation not permitted
[aac @ 0x1f702c0] Sample rate index in program config element does not
match the sample rate index configured by the container.
[aac @ 0x1f702c0] Reserved bit set.
Error while decoding stream #0:0: Invalid data found when processing input
[aac @ 0x1f702c0] channel element 2.7 is not allocated
Error while decoding stream #0:0: Operation not permitted
[aac @ 0x1f702c0] Input buffer exhausted before END element found
Error while decoding stream #0:0: Operation not permitted
[aac @ 0x1f702c0] channel element 3.2 is not allocated
Error while decoding stream #0:0: Operation not permitted
[aac @ 0x1f702c0] Sample rate index in program config element does not
match the sample rate index configured by the container.
[aac @ 0x1f702c0] Prediction is not allowed in AAC-LC.
Error while decoding stream #0:0: Invalid data found when processing input
[aac @ 0x1f702c0] Prediction is not allowed in AAC-LC.
Error while decoding stream #0:0: Invalid data found when processing input
[aac @ 0x1f702c0] channel element 3.1 is not allocated
Error while decoding stream #0:0: Operation not permitted
[aac @ 0x1f702c0] Sample rate index in program config element does not
match the sample rate index configured by the container.
[aac @ 0x1f702c0] decode_pce: Input buffer exhausted before END element
found
Error while decoding stream #0:0: Operation not permitted
[aac @ 0x1f702c0] channel element 3.11 is not allocated
Error while decoding stream #0:0: Operation not permitted
[aac @ 0x1f702c0] channel element 2.15 is not allocated
Error while decoding stream #0:0: Operation not permitted
[aac @ 0x1f702c0] Scalefactor (-1) out of range.
Error while decoding stream #0:0: Operation not permitted
[aac @ 0x1f702c0] channel element 2.0 is not allocated
Error while decoding stream #0:0: Operation not permitted
[aac @ 0x1f702c0] channel element 2.7 is not allocated
Error while decoding stream #0:0: Operation not permitted
[aac @ 0x1f702c0] skip_data_stream_element: Input buffer exhausted before
END element found
Error while decoding stream #0:0: Operation not permitted
[aac @ 0x1f702c0] Sample rate index in program config element does not
match the sample rate index configured by the container.
[aac @ 0x1f702c0] decode_pce: Input buffer exhausted before END element
found
Error while decoding stream #0:0: Operation not permitted
[aac @ 0x1f702c0] SBR was found before the first channel element.
[aac @ 0x1f702c0] Reserved bit set.
Error while decoding stream #0:0: Invalid data found when processing input
[aac @ 0x1f702c0] channel element 3.5 is not allocated
Error while decoding stream #0:0: Operation not permitted
[aac @ 0x1f702c0] channel element 3.4 is not allocated
Error while decoding stream #0:0: Operation not permitted
[aac @ 0x1f702c0] Reserved bit set.
Error while decoding stream #0:0: Invalid data found when processing input
[aac @ 0x1f702c0] skip_data_stream_element: Input buffer exhausted before
END element found
Error while decoding stream #0:0: Operation not permitted
[aac @ 0x1f702c0] Prediction is not allowed in AAC-LC.
Error while decoding stream #0:0: Invalid data found when processing input
[aac @ 0x1f702c0] Sample rate index in program config element does not
match the sample rate index configured by the container.
[aac @ 0x1f702c0] decode_pce: Input buffer exhausted before END element
found
Error while decoding stream #0:0: Operation not permitted
[aac @ 0x1f702c0] Sample rate index in program config element does not
match the sample rate index configured by the container.
[aac @ 0x1f702c0] decode_pce: Input buffer exhausted before END element
found
Error while decoding stream #0:0: Operation not permitted
[aac @ 0x1f702c0] channel element 3.11 is not allocated
Error while decoding stream #0:0: Operation not permitted
[aac @ 0x1f702c0] Reserved bit set.
Error while decoding stream #0:0: Invalid data found when processing input
[aac @ 0x1f702c0] Reserved bit set.
Error while decoding stream #0:0: Invalid data found when processing input
[aac @ 0x1f702c0] Sample rate index in program config element does not
match the sample rate index configured by the container.
[aac @ 0x1f702c0] decode_pce: Input buffer exhausted before END element
found
Error while decoding stream #0:0: Operation not permitted
[aac @ 0x1f702c0] Reserved bit set.
Error while decoding stream #0:0: Invalid data found when processing input
[aac @ 0x1f702c0] Reserved bit set.
Error while decoding stream #0:0: Invalid data found when processing input
[aac @ 0x1f702c0] channel element 2.13 is not allocated
Error while decoding stream #0:0: Operation not permitted
[aac @ 0x1f702c0] Sample rate index in program config element does not
match the sample rate index configured by the container.
Last message repeated 1 times
[aac @ 0x1f702c0] decode_pce: Input buffer exhausted before END element
found
Error while decoding stream #0:0: Operation not permitted
[aac @ 0x1f702c0] skip_data_stream_element: Input buffer exhausted before
END element found
Error while decoding stream #0:0: Operation not permitted
[aac @ 0x1f702c0] channel element 2.7 is not allocated
Error while decoding stream #0:0: Operation not permitted
[aac @ 0x1f702c0] channel element 3.11 is not allocated
Error while decoding stream #0:0: Operation not permitted
[aac @ 0x1f702c0] Reserved bit set.
Error while decoding stream #0:0: Invalid data found when processing input
[aac @ 0x1f702c0] channel element 3.11 is not allocated
Error while decoding stream #0:0: Operation not permitted
[aac @ 0x1f702c0] Reserved bit set.
Error while decoding stream #0:0: Invalid data found when processing input
[aac @ 0x1f702c0] channel element 3.1 is not allocated
Error while decoding stream #0:0: Operation not permitted
[aac @ 0x1f702c0] invalid band type
Error while decoding stream #0:0: Operation not permitted
[aac @ 0x1f702c0] Reserved bit set.
Error while decoding stream #0:0: Invalid data found when processing input
[aac @ 0x1f702c0] Sample rate index in program config element does not
match the sample rate index configured by the container.
[aac @ 0x1f702c0] decode_pce: Input buffer exhausted before END element
found
Error while decoding stream #0:0: Operation not permitted
[aac @ 0x1f702c0] Reserved bit set.
Error while decoding stream #0:0: Invalid data found when processing input
[aac @ 0x1f702c0] Sample rate index in program config element does not
match the sample rate index configured by the container.
[aac @ 0x1f702c0] decode_pce: Input buffer exhausted before END element
found
Error while decoding stream #0:0: Operation not permitted
[aac @ 0x1f702c0] Sample rate index in program config element does not
match the sample rate index configured by the container.
[aac @ 0x1f702c0] Prediction is not allowed in AAC-LC.
Error while decoding stream #0:0: Invalid data found when processing input
[aac @ 0x1f702c0] Prediction is not allowed in AAC-LC.
Error while decoding stream #0:0: Invalid data found when processing input
[aac @ 0x1f702c0] Sample rate index in program config element does not
match the sample rate index configured by the container.
[aac @ 0x1f702c0] decode_pce: Input buffer exhausted before END element
found
Error while decoding stream #0:0: Operation not permitted
[aac @ 0x1f702c0] Sample rate index in program config element does not
match the sample rate index configured by the container.
[aac @ 0x1f702c0] decode_pce: Input buffer exhausted before END element
found
Error while decoding stream #0:0: Operation not permitted
[aac @ 0x1f702c0] Reserved bit set.
Error while decoding stream #0:0: Invalid data found when processing input
[aac @ 0x1f702c0] Sample rate index in program config element does not
match the sample rate index configured by the container.
[aac @ 0x1f702c0] decode_pce: Input buffer exhausted before END element
found
Error while decoding stream #0:0: Operation not permitted
[aac @ 0x1f702c0] channel element 3.2 is not allocated
Error while decoding stream #0:0: Operation not permitted
[aac @ 0x1f702c0] Sample rate index in program config element does not
match the sample rate index configured by the container.
[aac @ 0x1f702c0] Number of bands (14) exceeds limit (8).
Error while decoding stream #0:0: Operation not permitted
[aac @ 0x1f702c0] channel element 2.0 is not allocated
Error while decoding stream #0:0: Operation not permitted
[aac @ 0x1f702c0] Number of bands (7) exceeds limit (4).
Error while decoding stream #0:0: Operation not permitted
[aac @ 0x1f702c0] Sample rate index in program config element does not
match the sample rate index configured by the container.
[aac @ 0x1f702c0] Too many channels
Error while decoding stream #0:0: Invalid data found when processing input
[aac @ 0x1f702c0] SBR was found before the first channel element.
[aac @ 0x1f702c0] channel element 3.15 is not allocated
Error while decoding stream #0:0: Operation not permitted
[aac @ 0x1f702c0] channel element 3.1 is not allocated
Error while decoding stream #0:0: Operation not permitted
[aac @ 0x1f702c0] channel element 3.6 is not allocated
Error while decoding stream #0:0: Operation not permitted
[aac @ 0x1f702c0] channel element 2.14 is not allocated
Error while decoding stream #0:0: Operation not permitted
[aac @ 0x1f702c0] channel element 3.15 is not allocated
Error while decoding stream #0:0: Operation not permitted
[aac @ 0x1f702c0] channel element 2.0 is not allocated
Error while decoding stream #0:0: Operation not permitted
[aac @ 0x1f702c0] channel element 3.5 is not allocated
Error while decoding stream #0:0: Operation not permitted
[aac @ 0x1f702c0] channel element 2.0 is not allocated
Error while decoding stream #0:0: Operation not permitted
[aac @ 0x1f702c0] Number of bands (14) exceeds limit (11).
Error while decoding stream #0:0: Operation not permitted
[aac @ 0x1f702c0] Sample rate index in program config element does not
match the sample rate index configured by the container.
[aac @ 0x1f702c0] decode_pce: Input buffer exhausted before END element
found
Error while decoding stream #0:0: Operation not permitted
[aac @ 0x1f702c0] Number of bands (54) exceeds limit (37).
Error while decoding stream #0:0: Operation not permitted
[aac @ 0x1f702c0] Reserved bit set.
Error while decoding stream #0:0: Invalid data found when processing input
[aac @ 0x1f702c0] Reserved bit set.
Error while decoding stream #0:0: Invalid data found when processing input
[aac @ 0x1f702c0] Number of bands (6) exceeds limit (2).
Error while decoding stream #0:0: Operation not permitted
[aac @ 0x1f702c0] Reserved bit set.
Error while decoding stream #0:0: Invalid data found when processing input
[aac @ 0x1f702c0] channel element 2.7 is not allocated
Error while decoding stream #0:0: Operation not permitted
[aac @ 0x1f702c0] Number of bands (6) exceeds limit (3).
Error while decoding stream #0:0: Operation not permitted
[aac @ 0x1f702c0] Reserved bit set.
Error while decoding stream #0:0: Invalid data found when processing input
[aac @ 0x1f702c0] Reserved bit set.
Error while decoding stream #0:0: Invalid data found when processing input
[aac @ 0x1f702c0] Sample rate index in program config element does not
match the sample rate index configured by the container.
Last message repeated 1 times
[aac @ 0x1f702c0] decode_pce: Input buffer exhausted before END element
found
Error while decoding stream #0:0: Operation not permitted
[aac @ 0x1f702c0] Reserved bit set.
Error while decoding stream #0:0: Invalid data found when processing input
[aac @ 0x1f702c0] Sample rate index in program config element does not
match the sample rate index configured by the container.
[aac @ 0x1f702c0] decode_pce: Input buffer exhausted before END element
found
Error while decoding stream #0:0: Operation not permitted
[aac @ 0x1f702c0] Reserved bit set.
Error while decoding stream #0:0: Invalid data found when processing input
[aac @ 0x1f702c0] Reserved bit set.
Error while decoding stream #0:0: Invalid data found when processing input
[aac @ 0x1f702c0] skip_data_stream_element: Input buffer exhausted before
END element found
Error while decoding stream #0:0: Operation not permitted
[aac @ 0x1f702c0] channel element 2.5 is not allocated
Error while decoding stream #0:0: Operation not permitted
[aac @ 0x1f702c0] skip_data_stream_element: Input buffer exhausted before
END element found
Error while decoding stream #0:0: Operation not permitted
[aac @ 0x1f702c0] Reserved bit set.
Error while decoding stream #0:0: Invalid data found when processing input
[aac @ 0x1f702c0] channel element 2.7 is not allocated
Error while decoding stream #0:0: Operation not permitted
[aac @ 0x1f702c0] channel element 3.5 is not allocated
Error while decoding stream #0:0: Operation not permitted
[aac @ 0x1f702c0] skip_data_stream_element: Input buffer exhausted before
END element found
Error while decoding stream #0:0: Operation not permitted
[aac @ 0x1f702c0] Prediction is not allowed in AAC-LC.
Error while decoding stream #0:0: Invalid data found when processing input
[aac @ 0x1f702c0] Reserved bit set.
Error while decoding stream #0:0: Invalid data found when processing input
[aac @ 0x1f702c0] Prediction is not allowed in AAC-LC.
Error while decoding stream #0:0: Invalid data found when processing input
[aac @ 0x1f702c0] channel element 2.7 is not allocated
Error while decoding stream #0:0: Operation not permitted
[aac @ 0x1f702c0] Number of bands (4) exceeds limit (2).
Error while decoding stream #0:0: Operation not permitted
[aac @ 0x1f702c0] illegal icc
Last message repeated 1 times
size= 3928kB time=00:00:30.01 bitrate=1072.0kbits/s
video:0kB audio:3928kB subtitle:0 global headers:0kB muxing overhead
0.001989%
}}}
{{{
$ ffmpeg -ss 630 -i a.aac -t 30 out2.wav
ffmpeg version N-50189-g239b88c Copyright (c) 2000-2013 the FFmpeg
developers
built on Feb 22 2013 23:46:57 with gcc 4.7 (SUSE Linux)
configuration: --enable-gpl --disable-indev=jack
libavutil 52. 17.102 / 52. 17.102
libavcodec 54. 92.100 / 54. 92.100
libavformat 54. 63.100 / 54. 63.100
libavdevice 54. 3.103 / 54. 3.103
libavfilter 3. 39.101 / 3. 39.101
libswscale 2. 2.100 / 2. 2.100
libswresample 0. 17.102 / 0. 17.102
libpostproc 52. 2.100 / 52. 2.100
[aac @ 0x342dfc0] max_analyze_duration 5000000 reached at 5015510
microseconds
[aac @ 0x342dfc0] Estimating duration from bitrate, this may be inaccurate
Input #0, aac, from 'a.aac':
Duration: 00:11:39.45, bitrate: 32 kb/s
Stream #0:0: Audio: aac, 44100 Hz, stereo, fltp, 33 kb/s
Output #0, wav, to 'out2.wav':
Metadata:
ISFT : Lavf54.63.100
Stream #0:0: Audio: pcm_s16le ([1][0][0][0] / 0x0001), 44100 Hz,
stereo, s16, 1411 kb/s
Stream mapping:
Stream #0:0 -> #0:0 (aac -> pcm_s16le)
Press [q] to stop, [?] for help
[aac @ 0x34342c0] Reserved SBR extensions is not implemented. Update your
FFmpeg version to the newest one from Git. If the problem still occurs, it
means that your file has a feature which has not been implemented.
[aac @ 0x34342c0] If you want to help, upload a sample of this file to
ftp://upload.ffmpeg.org/MPlayer/incoming/ and contact the ffmpeg-devel
mailing list.
[aac @ 0x34342c0] Reserved SBR extensions is not implemented. Update your
FFmpeg version to the newest one from Git. If the problem still occurs, it
means that your file has a feature which has not been implemented.
[aac @ 0x34342c0] If you want to help, upload a sample of this file to
ftp://upload.ffmpeg.org/MPlayer/incoming/ and contact the ffmpeg-devel
mailing list.
[aac @ 0x34342c0] Reserved SBR extensions is not implemented. Update your
FFmpeg version to the newest one from Git. If the problem still occurs, it
means that your file has a feature which has not been implemented.
[aac @ 0x34342c0] If you want to help, upload a sample of this file to
ftp://upload.ffmpeg.org/MPlayer/incoming/ and contact the ffmpeg-devel
mailing list.
[aac @ 0x34342c0] Expected to read 72 PS bits actually read 76.
[aac @ 0x34342c0] Expected to read 78 PS bits actually read 103.
[aac @ 0x34342c0] Expected to read 94 PS bits actually read 111.
[aac @ 0x34342c0] Expected to read 78 PS bits actually read 101.
[aac @ 0x34342c0] ps extension overflow -4
[aac @ 0x34342c0] channel element 2.6 is not allocated
Error while decoding stream #0:0: Operation not permitted
Multiple frames in a packet from stream 0
[aac @ 0x34342c0] Number of bands (35) exceeds limit (18).
Error while decoding stream #0:0: Operation not permitted
[aac @ 0x34342c0] channel element 2.7 is not allocated
Error while decoding stream #0:0: Operation not permitted
[aac @ 0x34342c0] Reserved bit set.
Error while decoding stream #0:0: Invalid data found when processing input
[aac @ 0x34342c0] Reserved bit set.
Error while decoding stream #0:0: Invalid data found when processing input
[aac @ 0x34342c0] Sample rate index in program config element does not
match the sample rate index configured by the container.
[aac @ 0x34342c0] Too many channels
Error while decoding stream #0:0: Invalid data found when processing input
[aac @ 0x34342c0] Reserved bit set.
Error while decoding stream #0:0: Invalid data found when processing input
[aac @ 0x34342c0] Prediction is not allowed in AAC-LC.
Error while decoding stream #0:0: Invalid data found when processing input
[aac @ 0x34342c0] Reserved bit set.
Error while decoding stream #0:0: Invalid data found when processing input
[aac @ 0x34342c0] channel element 2.5 is not allocated
Error while decoding stream #0:0: Operation not permitted
[aac @ 0x34342c0] channel element 3.15 is not allocated
Error while decoding stream #0:0: Operation not permitted
[aac @ 0x34342c0] Number of scalefactor bands in group (62) exceeds limit
(47).
Error while decoding stream #0:0: Invalid data found when processing input
[aac @ 0x34342c0] Sample rate index in program config element does not
match the sample rate index configured by the container.
[aac @ 0x34342c0] channel element 1.8 is not allocated
Error while decoding stream #0:0: Operation not permitted
[aac @ 0x34342c0] skip_data_stream_element: Input buffer exhausted before
END element found
Error while decoding stream #0:0: Operation not permitted
[aac @ 0x34342c0] channel element 2.2 is not allocated
Error while decoding stream #0:0: Operation not permitted
[aac @ 0x34342c0] Reserved bit set.
Error while decoding stream #0:0: Invalid data found when processing input
[aac @ 0x34342c0] Number of bands (50) exceeds limit (39).
Error while decoding stream #0:0: Operation not permitted
[aac @ 0x34342c0] channel element 2.6 is not allocated
Error while decoding stream #0:0: Operation not permitted
[aac @ 0x34342c0] Sample rate index in program config element does not
match the sample rate index configured by the container.
[aac @ 0x34342c0] channel element 2.1 is not allocated
Error while decoding stream #0:0: Operation not permitted
[aac @ 0x34342c0] Number of scalefactor bands in group (60) exceeds limit
(47).
Error while decoding stream #0:0: Invalid data found when processing input
size= 5016kB time=00:00:30.00 bitrate=1369.5kbits/s
video:0kB audio:5016kB subtitle:0 global headers:0kB muxing overhead
0.001558%
}}}
--
Ticket URL: <https://ffmpeg.org/trac/ffmpeg/ticket/1694#comment:8>
FFmpeg <http://ffmpeg.org>
FFmpeg issue tracker
More information about the FFmpeg-trac
mailing list