[FFmpeg-user] FFmpeg /x264 building for Android

Mehmet Kerim Yücel mehmetkerimyucel at yahoo.com
Thu Aug 30 02:34:16 CEST 2012


I also would like to add the following scripts and the errors I have encountered.

Script I am using is as follows.
NDK=~/Android_NDK_r7b
PLATFORM=$NDK/platforms/android-8/arch-arm/
PREBUILT=$NDK/toolchains/arm-linux-androideabi-4.4.3/prebuilt/linux-x86
x264=/usr/local
#x264v2=~/x264
function build_one
{
./configure --target-os=linux \
    --prefix=$PREFIX \
    --enable-cross-compile \
    --extra-libs="-lgcc" \
    --arch=arm \
    --cc=$PREBUILT/bin/arm-linux-androideabi-gcc \
    --cross-prefix=$PREBUILT/bin/arm-linux-androideabi- \
    --nm=$PREBUILT/bin/arm-linux-androideabi-nm \
    --sysroot=$PLATFORM \
   # --extra-cflags=" -O3 -fpic -DANDROID -DHAVE_SYS_UIO_H=1 -Dipv6mr_interface=ipv6mr_ifindex -fasm -Wno-psabi -fno-short-enums -fno-strict-aliasing -finline-limit=300 $OPTIMIZE_CFLAGS " \
    --extra-cflags="-I$x264/include" \
    --enable-shared \
    --enable-static \
    #--extra-ldflags="-Wl,-rpath-link=$PLATFORM/usr/lib  -L$PLATFORM/usr/lib -nostdlib -lc -lm -ldl -llog" \
    --extra-ldflags="-L$x264/lib" \ 
   --disable-everything \
   # --enable-demuxer=mov \
   # --enable-demuxer=h264 \
   # --disable-ffplay \
    --enable-gpl \
    --enable-libx264 \
   # --enable-protocol=file \
   # --enable-avformat \
   # --enable-avcodec \
   # --enable-encoder=libx264 \
   # --enable-decoder=rawvideo \
   #--enable-decoder=mjpeg \
   # --enable-decoder=h263 \
   # --enable-decoder=mpeg4 \
   # --enable-encoder=h264 \
   # --disable-network \
    #--enable-zlib \
   # --disable-avfilter \
    #--disable-avdevice \
    $ADDITIONAL_CONFIGURE_FLAG

make clean
make  -j4 install
$PREBUILT/bin/arm-linux-androideabi-ar d libavcodec/libavcodec.a inverse.o
$PREBUILT/bin/arm-linux-androideabi-ld -rpath-link=$PLATFORM/usr/lib -L$PLATFORM/usr/lib  -soname libffmpeg.so -shared -nostdlib  -z,noexecstack -Bsymbolic --whole-archive --no-undefined -o $PREFIX/libffmpeg.so libavcodec/libavcodec.a libavformat/libavformat.a libavutil/libavutil.a libswscale/libswscale.a -lc -lm -lz -ldl -llog  --warn-once  --dynamic-linker=/system/bin/linker $PREBUILT/lib/gcc/arm-linux-androideabi/4.4.3/libgcc.a
}

#arm v7vfpv3
CPU=armv7-a
OPTIMIZE_CFLAGS="-mfloat-abi=softfp -mfpu=vfpv3-d16 -marm -march=$CPU "
PREFIX=./androidIncludeTrialsNDK7/$CPU
ADDITIONAL_CONFIGURE_FLAG=
build_one

If I basically delete the lines extracf and extrald flags and use  other ones (commented outs), it works fine except libx264 not found error. I obtain these in terminal.
./buildnew.sh: line 35: --extra-cflags=-I/usr/local/include: No such file or directory
./buildnew.sh: line 38: --extra-ldflags=-L/usr/local/lib: No such file or directory
./buildnew.sh: line 40: --disable-everything: command not found
./buildnew.sh: line 44: --enable-gpl: command not found


The compilation process ends with the following.
make: *** [libavdevice/v4l.o] Error 1
make: *** Waiting for unfinished jobs....
/home/mehmet/Android_NDK_r7b/toolchains/arm-linux-androideabi-4.4.3/prebuilt/linux-x86/bin/arm-linux-androideabi-ar: creating libavcodec/libavcodec.a
/home/mehmet/Android_NDK_r7b/toolchains/arm-linux-androideabi-4.4.3/prebuilt/linux-x86/bin/arm-linux-androideabi-ld: cannot open output file ./androidIncludeTrialsNDK7/armv7-a/libffmpeg.so: No such file or directory


  I have x264 installed in my directory /home/mehmet/x264 and I also check whereis x264.a, it shows me as /usr/local/lib.  I have tried changing the path $x264 to point out to home/mehmet/x264 folder, but I get the same error. 

Lastly, if I enable both extracf and extrald flags. I get the same error mentioned above. I am afraid I am doing a simple typo here, but can`t see it and it is driving me crazy. Thanks a lot for your help.

Best.

 
M.Kerim Yücel


 


________________________________
 From: Mehmet Kerim Yücel <mehmetkerimyucel at yahoo.com>
To: "ffmpeg-user at ffmpeg.org" <ffmpeg-user at ffmpeg.org> 
Sent: Thursday, August 30, 2012 12:15 AM
Subject: [FFmpeg-user] FFmpeg /x264 building for Android
 
Hello everybody,

I have few questions, please keep in mind that I am a beginner at this and sorry if my questions are simple ones.


I have been trying to build ffmpeg for Android lately and encountered few problems. I have been using this tutorial ( http://www.roman10.net/how-to-build-ffmpeg-for-android/ ) and managed to build ffmpeg. I wanted to include libx264 and found out that I had to compile libx264 seperately, which I did as well.

I am trying to include libx264.a static library to ffmpeg build. I know that I have to change extracf and extrald flags( so that ffmpeg can include libx264 static library)  while configuring ffmpeg, but I don't know exactly how.  Any help might be really helpful.

My last question is related to size of libffmpeg.so shared library. I have used the versions of NDK and ffmpeg in aforementioned tutorial link and libffmeg.so's size was around 6mb. I have tried the same script for different NDK and ffmpeg versions, such as NDK 7 ffmpeg 0.10.4 and obtained the file size as 3mb. What does that mean? Is this a problem? Static libraries and include files are same as tutorial's case (NDK 5b and Love version of ffmpeg). 

Thanks in advance for the answers.

Best,
 
M.Kerim Yücel
_______________________________________________
ffmpeg-user mailing list
ffmpeg-user at ffmpeg.org
http://ffmpeg.org/mailman/listinfo/ffmpeg-user


More information about the ffmpeg-user mailing list