[FFmpeg-user] LUFS measurment for short length audio

[Bouke]

> On 14 Sep 2020, at 13:54, <christian.will at 4-real.com> <christian.will at 4-real.com> wrote:
> 
> Its all mono we are talking about here
> 
> Full command line would be
> ffmpeg -nostats -i '#{filename}' -filter_complex ebur128 -f null - 2>&1
> (i only forward this from the IT section, but its the standard ffmpeg lufs measurment as far as i know)
> 
> yes, we dont know if the customer values are correct. The problem is, there is no correct if you dont use the same method/algo.
> There are different meters coming up with different values on LUFSs, specially if you are under 0,4s.
> You are right, the best would be to use the same method, but our customer wont share their method and we cant reverse engineer something we dont own.
> 
> Yes, there ist the (m) value in the output, but i think its not very reliable ... as the file measured isnt silent 😊

I would think M is not relevant, as it should equal I if the file is 400 Msecs…
And I can reproduce the issue on a short file. But, if I cat the file with silence before / after, then measure with adding -ss yadda -t sourcedur it seems to work.
(But a looped input results the same values when scanned fully.)


 
Bouke.


> 
> 
> 
> -----Ursprüngliche Nachricht-----
> Von: ffmpeg-user <ffmpeg-user-bounces at ffmpeg.org> Im Auftrag von Bouke
> Gesendet: Montag, 14. September 2020 13:41
> An: FFmpeg user questions <ffmpeg-user at ffmpeg.org>
> Betreff: Re: [FFmpeg-user] LUFS measurment for short length audio
> 
> 
>> On 14 Sep 2020, at 13:23, christian.will at 4-real.com wrote:
>> 
>> 
>> To cat means to loop the file until it is longer then 0,4s?
> 
> yes
> 
>> 
>> Yes we tried, there is a variation of 3db or more, so it is kind of suboptimal.
> 
> If it’s exact 3db, it smells like you might render the file to mono on catting, are you sure that’s not the case?
> 
>> We also know the loudnorm command.
> 
> Why, if you want to conform to R128 specs, you analyse, get the I value, and lower / up the volume by the measured Integrated minus target Integrated (in Db, one LU is equal to one dB)
>> 
>> We use this command atm to read out values:
>> 
>> ffmpeg -nostats -i 'filename' -filter_complex ebur128 -f null
> 
> This might or might not work, if it’s 5.1, you would need to omit the LFE channel, and if there are multiple tracks you would need to patch the correct ones first.
> So, full command line / output missing :-) (I would never think I would write this…)
> 
>> and it is fine with all files >0,4s. As it should be relating to the ebu128 definition.
>> 
>> Anyway, our customer provides us with lufs values for shorter lenghts and he wont tell us how he analyses it.
> 
> So you have no clue if your client measurements are correct? I would not accept this, you would need to reverse engineer your clients steps...
> 
>> 
>> Now we tried to read out momentary lufs, as it works with 400ms windows, but im not sure if i get correct values here.
>> As it shows -120db mLUFS for an example and on proTools it says 
>> -23--24db (with DPMeterXP2)
> 
> -120 is silence… 
> 
>> 
>> Anybody an idea how to read out reliable momentary LUFS values with ffmpeg?
> 
> Not sure how reliable it is, but it’s just in the output I would think…
> 
> Bouke
> 
> 
>> 
>> -----Ursprüngliche Nachricht-----
>> Von: ffmpeg-user <ffmpeg-user-bounces at ffmpeg.org> Im Auftrag von Gyan 
>> Doshi
>> Gesendet: Montag, 14. September 2020 09:50
>> An: ffmpeg-user at ffmpeg.org
>> Betreff: Re: [FFmpeg-user] LUFS measurment for short length audio
>> 
>> 
>> 
>> On 14-09-2020 01:15 pm, Bouke wrote:
>>>> On 09 Sep 2020, at 10:33, christian.will at 4-real.com wrote:
>>>> 
>>>> 
>>>> 
>>>> Hi list!
>>>> 
>>>> 
>>>> 
>>>> Can somebody help to measure LUFS for audio files under 0,4 seconds???
>>>> 
>>> Cat it a couple of times first?
>> 
>> A few more times is required. Total duration should be  >3 seconds.
>> 
>> See https://superuser.com/q/1281327/
>> 
>> Gyan
>> _______________________________________________
>> 
> 
> _______________________________________________
> ffmpeg-user mailing list
> ffmpeg-user at ffmpeg.org
> https://ffmpeg.org/mailman/listinfo/ffmpeg-user
> 
> To unsubscribe, visit link above, or email ffmpeg-user-request at ffmpeg.org with subject "unsubscribe".
> 
> _______________________________________________
> ffmpeg-user mailing list
> ffmpeg-user at ffmpeg.org
> https://ffmpeg.org/mailman/listinfo/ffmpeg-user
> 
> To unsubscribe, visit link above, or email
> ffmpeg-user-request at ffmpeg.org with subject "unsubscribe".