FFmpeg
|
#include <ac3dsp.h>
Data Fields | |
void(* | ac3_exponent_min )(uint8_t *exp, int num_reuse_blocks, int nb_coefs) |
Set each encoded exponent in a block to the minimum of itself and the exponents in the same frequency bin of up to 5 following blocks. | |
int(* | ac3_max_msb_abs_int16 )(const int16_t *src, int len) |
Calculate the maximum MSB of the absolute value of each element in an array of int16_t. | |
void(* | ac3_lshift_int16 )(int16_t *src, unsigned int len, unsigned int shift) |
Left-shift each value in an array of int16_t by a specified amount. | |
void(* | ac3_rshift_int32 )(int32_t *src, unsigned int len, unsigned int shift) |
Right-shift each value in an array of int32_t by a specified amount. | |
void(* | float_to_fixed24 )(int32_t *dst, const float *src, unsigned int len) |
Convert an array of float in range [-1.0,1.0] to int32_t with range [-(1<<24),(1<<24)]. | |
void(* | bit_alloc_calc_bap )(int16_t *mask, int16_t *psd, int start, int end, int snr_offset, int floor, const uint8_t *bap_tab, uint8_t *bap) |
Calculate bit allocation pointers. | |
void(* | update_bap_counts )(uint16_t mant_cnt[16], uint8_t *bap, int len) |
Update bap counts using the supplied array of bap. | |
int(* | compute_mantissa_size )(uint16_t mant_cnt[6][16]) |
Calculate the number of bits needed to encode a set of mantissas. | |
void(* | extract_exponents )(uint8_t *exp, int32_t *coef, int nb_coefs) |
void(* | sum_square_butterfly_int32 )(int64_t sum[4], const int32_t *coef0, const int32_t *coef1, int len) |
void(* | sum_square_butterfly_float )(float sum[4], const float *coef0, const float *coef1, int len) |
void(* | downmix )(float **samples, float(*matrix)[2], int out_ch, int in_ch, int len) |
void(* | downmix_fixed )(int32_t **samples, int16_t(*matrix)[2], int out_ch, int in_ch, int len) |
void(* | apply_window_int16 )(int16_t *output, const int16_t *input, const int16_t *window, unsigned int len) |
Apply symmetric window in 16-bit fixed-point. | |
Set each encoded exponent in a block to the minimum of itself and the exponents in the same frequency bin of up to 5 following blocks.
exp | pointer to the start of the current block of exponents. constraints: align 16 |
num_reuse_blocks | number of blocks that will reuse exponents from the current block. constraints: range 0 to 5 |
nb_coefs | number of frequency coefficients. |
Definition at line 43 of file ac3dsp.h.
Referenced by encode_exponents(), ff_ac3dsp_init(), ff_ac3dsp_init_arm(), and ff_ac3dsp_init_x86().
Calculate the maximum MSB of the absolute value of each element in an array of int16_t.
src | input array constraints: align 16. values must be in range [-32767,32767] |
len | number of values in the array constraints: multiple of 16 greater than 0 |
Definition at line 54 of file ac3dsp.h.
Referenced by ff_ac3dsp_init(), ff_ac3dsp_init_arm(), ff_ac3dsp_init_x86(), and normalize_samples().
Left-shift each value in an array of int16_t by a specified amount.
src | input array constraints: align 16 |
len | number of values in the array constraints: multiple of 32 greater than 0 |
shift | left shift amount constraints: range [0,15] |
Definition at line 65 of file ac3dsp.h.
Referenced by ff_ac3dsp_init(), ff_ac3dsp_init_arm(), ff_ac3dsp_init_x86(), and normalize_samples().
Right-shift each value in an array of int32_t by a specified amount.
src | input array constraints: align 16 |
len | number of values in the array constraints: multiple of 16 greater than 0 |
shift | right shift amount constraints: range [0,31] |
Definition at line 76 of file ac3dsp.h.
Referenced by ff_ac3dsp_init(), ff_ac3dsp_init_arm(), ff_ac3dsp_init_x86(), and scale_coefficients().
Convert an array of float in range [-1.0,1.0] to int32_t with range [-(1<<24),(1<<24)].
dst | destination array of int32_t. constraints: 16-byte aligned |
src | source array of float. constraints: 16-byte aligned |
len | number of elements to convert. constraints: multiple of 32 greater than zero |
Definition at line 89 of file ac3dsp.h.
Referenced by apply_channel_coupling(), ff_ac3dsp_init(), ff_ac3dsp_init_arm(), ff_ac3dsp_init_mips(), ff_ac3dsp_init_x86(), and scale_coefficients().
void(* AC3DSPContext::bit_alloc_calc_bap)(int16_t *mask, int16_t *psd, int start, int end, int snr_offset, int floor, const uint8_t *bap_tab, uint8_t *bap) |
Calculate bit allocation pointers.
The SNR is the difference between the masking curve and the signal. AC-3 uses this value for each frequency bin to allocate bits. The snroffset parameter is a global adjustment to the SNR for all bins.
[in] | mask | masking curve |
[in] | psd | signal power for each frequency bin |
[in] | start | starting bin location |
[in] | end | ending bin location |
[in] | snr_offset | SNR adjustment |
[in] | floor | noise floor |
[in] | bap_tab | look-up table for bit allocation pointers |
[out] | bap | bit allocation pointers |
Definition at line 106 of file ac3dsp.h.
Referenced by bit_alloc(), decode_audio_block(), ff_ac3dsp_init(), ff_ac3dsp_init_arm(), and ff_ac3dsp_init_mips().
Update bap counts using the supplied array of bap.
[out] | mant_cnt | bap counts for 1 block |
[in] | bap | array of bap, pointing to start coef bin |
[in] | len | number of elements to process |
Definition at line 117 of file ac3dsp.h.
Referenced by count_mantissa_bits_update_ch(), ff_ac3dsp_init(), ff_ac3dsp_init_arm(), and ff_ac3dsp_init_mips().
int(* AC3DSPContext::compute_mantissa_size)(uint16_t mant_cnt[6][16]) |
Calculate the number of bits needed to encode a set of mantissas.
[in] | mant_cnt | bap counts for all blocks |
Definition at line 125 of file ac3dsp.h.
Referenced by count_mantissa_bits(), ff_ac3dsp_init(), and ff_ac3dsp_init_x86().
Definition at line 127 of file ac3dsp.h.
Referenced by apply_channel_coupling(), extract_exponents(), ff_ac3dsp_init(), ff_ac3dsp_init_arm(), and ff_ac3dsp_init_x86().
void(* AC3DSPContext::sum_square_butterfly_int32)(int64_t sum[4], const int32_t *coef0, const int32_t *coef1, int len) |
Definition at line 129 of file ac3dsp.h.
Referenced by ff_ac3dsp_init(), ff_ac3dsp_init_arm(), and sum_square_butterfly().
void(* AC3DSPContext::sum_square_butterfly_float)(float sum[4], const float *coef0, const float *coef1, int len) |
Definition at line 132 of file ac3dsp.h.
Referenced by ff_ac3dsp_init(), ff_ac3dsp_init_arm(), and sum_square_butterfly().
Definition at line 135 of file ac3dsp.h.
Referenced by decode_audio_block(), ff_ac3dsp_init(), ff_ac3dsp_init_mips(), and ff_ac3dsp_init_x86().
void(* AC3DSPContext::downmix_fixed)(int32_t **samples, int16_t(*matrix)[2], int out_ch, int in_ch, int len) |
Definition at line 138 of file ac3dsp.h.
Referenced by ff_ac3dsp_init().
void(* AC3DSPContext::apply_window_int16)(int16_t *output, const int16_t *input, const int16_t *window, unsigned int len) |
Apply symmetric window in 16-bit fixed-point.
output | destination array constraints: 16-byte aligned |
input | source array constraints: 16-byte aligned |
window | window array constraints: 16-byte aligned, at least len/2 elements |
len | full window length constraints: multiple of ? greater than zero |
Definition at line 152 of file ac3dsp.h.
Referenced by apply_mdct(), ff_ac3dsp_init(), ff_ac3dsp_init_arm(), and ff_ac3dsp_init_x86().