Go to the documentation of this file.
53 #define CHECK_CU(x) FF_CUDA_CHECK_DL(device_ctx, cu, x)
167 if (!
ctx->internal->pool_internal)
213 fmts[0] =
ctx->sw_format;
241 CUDA_MEMCPY2D cpy = {
242 .srcPitch =
src->linesize[
i],
248 if (
src->hw_frames_ctx) {
249 cpy.srcMemoryType = CU_MEMORYTYPE_DEVICE;
250 cpy.srcDevice = (CUdeviceptr)
src->data[
i];
252 cpy.srcMemoryType = CU_MEMORYTYPE_HOST;
253 cpy.srcHost =
src->data[
i];
257 cpy.dstMemoryType = CU_MEMORYTYPE_DEVICE;
258 cpy.dstDevice = (CUdeviceptr)dst->
data[
i];
260 cpy.dstMemoryType = CU_MEMORYTYPE_HOST;
261 cpy.dstHost = dst->
data[
i];
333 int ret, dev_active = 0;
334 unsigned int dev_flags = 0;
336 const unsigned int desired_flags = CU_CTX_SCHED_BLOCKING_SYNC;
344 &dev_flags, &dev_active));
348 if (dev_active && dev_flags != desired_flags) {
349 av_log(device_ctx,
AV_LOG_ERROR,
"Primary context already active with incompatible flags.\n");
351 }
else if (dev_flags != desired_flags) {
384 if (primary_ctx_opt && strtol(primary_ctx_opt->
value,
NULL, 10)) {
387 }
else if (primary_ctx_opt) {
401 int ret, device_idx = 0;
408 device_idx = strtol(device,
NULL, 0);
440 const char *src_uuid =
NULL;
441 int ret,
i, device_count;
448 VkPhysicalDeviceIDProperties vk_idp = {
449 .sType = VK_STRUCTURE_TYPE_PHYSICAL_DEVICE_ID_PROPERTIES,
453 switch (src_ctx->
type) {
455 #define TYPE PFN_vkGetPhysicalDeviceProperties2
459 VkPhysicalDeviceProperties2 vk_dev_props = {
460 .sType = VK_STRUCTURE_TYPE_PHYSICAL_DEVICE_PROPERTIES_2,
463 prop_fn(vkctx->
phys_dev, &vk_dev_props);
464 src_uuid = vk_idp.deviceUUID;
476 "Failed to get UUID of source device.\n");
491 ret =
CHECK_CU(cu->cuDeviceGetCount(&device_count));
496 for (
i = 0;
i < device_count;
i++) {
508 if (memcmp(src_uuid, uuid.bytes, sizeof (uuid.bytes)) == 0) {
static void error(const char *err)
void * hwctx
The format-specific data, allocated and freed by libavutil along with this context.
VkPhysicalDevice phys_dev
Physical device.
@ AV_PIX_FMT_CUDA
HW acceleration through CUDA.
AVPixelFormat
Pixel format.
static int cuda_context_init(AVHWDeviceContext *device_ctx, int flags)
Filter the word “frame” indicates either a video frame or a group of audio as stored in an AVFrame structure Format for each input and each output the list of supported formats For video that means pixel format For audio that means channel sample they are references to shared objects When the negotiation mechanism computes the intersection of the formats supported at each end of a all references to both lists are replaced with a reference to the intersection And when a single format is eventually chosen for a link amongst the remaining all references to the list are updated That means that if a filter requires that its input and output have the same format amongst a supported all it has to do is use a reference to the same list of formats query_formats can leave some formats unset and return AVERROR(EAGAIN) to cause the negotiation mechanism toagain later. That can be used by filters with complex requirements to use the format negotiated on one link to set the formats supported on another. Frame references ownership and permissions
static int cuda_device_derive(AVHWDeviceContext *device_ctx, AVHWDeviceContext *src_ctx, AVDictionary *opts, int flags)
static int cuda_transfer_get_formats(AVHWFramesContext *ctx, enum AVHWFrameTransferDirection dir, enum AVPixelFormat **formats)
static int cuda_flags_from_opts(AVHWDeviceContext *device_ctx, AVDictionary *opts, int *flags)
uint8_t * data
The data buffer.
This structure describes decoded (raw) audio or video data.
PFN_vkGetInstanceProcAddr get_proc_addr
Pointer to the instance-provided vkGetInstanceProcAddr loading function.
VkInstance inst
Vulkan instance.
#define AV_LOG_VERBOSE
Detailed information.
enum AVPixelFormat * valid_hw_formats
A list of possible values for format in the hw_frames_ctx, terminated by AV_PIX_FMT_NONE.
@ AV_PIX_FMT_VULKAN
Vulkan hardware images.
uint8_t * data[AV_NUM_DATA_POINTERS]
pointer to the picture/channel planes.
@ AV_HWDEVICE_TYPE_VULKAN
This struct describes the constraints on hardware frames attached to a given device with a hardware-s...
AVBufferPool * av_buffer_pool_init2(size_t size, void *opaque, AVBufferRef *(*alloc)(void *opaque, size_t size), void(*pool_free)(void *opaque))
Allocate and initialize a buffer pool with a more complex allocator.
int av_pix_fmt_get_chroma_sub_sample(enum AVPixelFormat pix_fmt, int *h_shift, int *v_shift)
Utility function to access log2_chroma_w log2_chroma_h from the pixel format AVPixFmtDescriptor.
This struct aggregates all the (hardware/vendor-specific) "high-level" state, i.e.
#define AV_LOG_ERROR
Something went wrong and cannot losslessly be recovered.
#define FF_ARRAY_ELEMS(a)
enum AVPixelFormat * valid_sw_formats
A list of possible values for sw_format in the hw_frames_ctx, terminated by AV_PIX_FMT_NONE.
AVDictionaryEntry * av_dict_get(const AVDictionary *m, const char *key, const AVDictionaryEntry *prev, int flags)
Get a dictionary entry with matching key.
AVBufferRef * av_buffer_pool_get(AVBufferPool *pool)
Allocate a new AVBuffer, reusing an old buffer from the pool when available.
@ AV_PIX_FMT_YUVA420P
planar YUV 4:2:0, 20bpp, (1 Cr & Cb sample per 2x2 Y & A samples)
#define AV_PIX_FMT_YUV444P16
#define AV_PIX_FMT_0BGR32
#define AV_LOG_DEBUG
Stuff which is only useful for libav* developers.
static int cuda_device_init(AVHWDeviceContext *ctx)
@ AV_PIX_FMT_YUV420P
planar YUV 4:2:0, 12bpp, (1 Cr & Cb sample per 2x2 Y samples)
Main Vulkan context, allocated as AVHWDeviceContext.hwctx.
static int cuda_transfer_data(AVHWFramesContext *ctx, AVFrame *dst, const AVFrame *src)
AVBufferRef * av_buffer_create(uint8_t *data, size_t size, void(*free)(void *opaque, uint8_t *data), void *opaque, int flags)
Create an AVBuffer from an existing array.
AVCUDADeviceContextInternal * internal
int av_image_fill_arrays(uint8_t *dst_data[4], int dst_linesize[4], const uint8_t *src, enum AVPixelFormat pix_fmt, int width, int height, int align)
Setup the data pointers and linesizes based on the specified image parameters and the provided array.
const HWContextType ff_hwcontext_type_cuda
int av_image_get_buffer_size(enum AVPixelFormat pix_fmt, int width, int height, int align)
Return the size in bytes of the amount of data required to store an image with the given parameters.
#define i(width, name, range_min, range_max)
#define av_malloc_array(a, b)
void * av_mallocz(size_t size)
Allocate a memory block with alignment suitable for all memory accesses (including vectors if availab...
static void cuda_device_uninit(AVHWDeviceContext *device_ctx)
AVHWFrameTransferDirection
This struct describes a set or pool of "hardware" frames (i.e.
This struct is allocated as AVHWDeviceContext.hwctx.
enum AVHWDeviceType type
This field identifies the underlying API used for hardware access.
@ AV_PIX_FMT_NV12
planar YUV 4:2:0, 12bpp, 1 plane for Y and 1 plane for the UV components, which are interleaved (firs...
these buffered frames must be flushed immediately if a new input produces new the filter must not call request_frame to get more It must just process the frame or queue it The task of requesting more frames is left to the filter s request_frame method or the application If a filter has several the filter must be ready for frames arriving randomly on any input any filter with several inputs will most likely require some kind of queuing mechanism It is perfectly acceptable to have a limited queue and to drop frames when the inputs are too unbalanced request_frame For filters that do not use the this method is called when a frame is wanted on an output For a it should directly call filter_frame on the corresponding output For a if there are queued frames already one of these frames should be pushed If the filter should request a frame on one of its repeatedly until at least one frame has been pushed Return or at least make progress towards producing a frame
#define AV_PIX_FMT_0RGB32
static void cuda_buffer_free(void *opaque, uint8_t *data)
AVBufferRef * hw_frames_ctx
For hwaccel-format frames, this should be a reference to the AVHWFramesContext describing the frame.
#define AV_CUDA_USE_PRIMARY_CONTEXT
Use primary device context instead of creating a new one.
static int cuda_device_create(AVHWDeviceContext *device_ctx, const char *device, AVDictionary *opts, int flags)
static enum AVPixelFormat supported_formats[]
@ AV_PIX_FMT_YUV444P
planar YUV 4:4:4, 24bpp, (1 Cr & Cb sample per 1x1 Y samples)
static int cuda_get_buffer(AVHWFramesContext *ctx, AVFrame *frame)
A reference to a data buffer.
static AVBufferRef * cuda_pool_alloc(void *opaque, size_t size)
#define flags(name, subs,...)
int linesize[AV_NUM_DATA_POINTERS]
For video, a positive or negative value, which is typically indicating the size in bytes of each pict...
static int cuda_frames_get_constraints(AVHWDeviceContext *ctx, const void *hwconfig, AVHWFramesConstraints *constraints)
static int cuda_frames_init(AVHWFramesContext *ctx)
const char * av_get_pix_fmt_name(enum AVPixelFormat pix_fmt)
Return the short name for a pixel format, NULL in case pix_fmt is unknown.